Line item taxes not showing in IDoc Orders02

We are on ECC6 and using IDoc ODERS02, when viewing the purchase order in me23n, taxes are visible on the line item under the invoice tab. When we view the same purchase order via the IDoc that was created, the line item taxes are not being displayed in segments E1EDP04 and E1EDP05.
Is there some configuration we need to do to get the taxes info into the IDoc?

Hi ,
Those Taxes fields should be selected for the segments you have mentioned .
Check out transaction bd53 ehen you create a Reduced Message type and check the segaments where fields are activatied or not .
Please reward if useful.

Similar Messages

Tax Line items are not showing seperately as per exp in FB60

Hi,
In FB60, I have booked the two expenses with tax code separately. While simulating the entry the tax lines are not showing separately as per expenses. For example:
Suppose my tax code = AB which is equal to 10% maintained in FTXP.
At present entry is coming as follows through FB60 is:
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               100
Credit     Vendor               1000
But we need the entry is follows
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               50
Debit      Tax               40
Credit     Vendor               1000
But I change the tax code for second line AB to XY then calculation of tax entries shows separately according to expenses.
Please let me know where did I do the mistake in configu2026u2026..
Regards,
Babjee

Hi!
Normally, all amounts being posted to the same GL Account and determined from the same tax code as automatically derived, will generate one common auto-generated line item. This is because tax reporting is usually based on tax code (external/tax reporting) and or GL account (internal/financial reporting).
In your first case since the tax code used for both line is the tax code was the same, it would be posting to the same GL Account - hence a common line item got auto-generated.
Check the Account Key and Assigned GL Accounts in T.Code FTXP. Additionally, check the Condition Type set-up (identified from FTXP) in T.Code SPRO / from menu IMG node Check Calculation Procedure.
Regards,
Ruchi

CJI5 commitment line item report not showing po gross value

Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
Sandeep

Hi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul

Line items are not showing in fbl3n,fs10n,faglb03,fagll03

hi experts,
i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account. At the same time, you use line item management with this account" and"Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected"
i do not understand the system response. can anyone please help me to solve this problem?
thanks &regards
konishko

sir
thanks for your reply. as per your suggestion i am trying to change in fs00 to uncheck the line item management but i am unable to do that,system shows that i have to uncheck the open item managemt also but the said account contain the open item. so i am not able to change the same. is there any other way to do that. can you please suggest me in detail? and one more thing that i am able to see only the balaces in fs10n. but not able to see the line item.this is probably for missing the business area in line item.
but i needs to see the line items.
can you please tell me any alternate way in detail to solve this problem?
thanks and regards
konishko

Line items are not showing in fbl1n/fk10n

hello all,
Again i needs your help. this time i am not able to see the line items in fbl1n and fk10n. system shows 360 line items are displayed but no line item are showing in screen.In fk10n i am just able to see the period wise balance. but line item not showing. this issue is only with my 5 vendor. in case of other vendor, i am able to see as i wish.
please suggest me how to solve it.
regards
konishko

Hi,
check the Reconciliation of that vendor.for that recon account line display should be selected.
For other vendors, reconciliation account is with line item display .selected. That might be the reason to show line items for remaining items.
check GL master of Recon acccount.

What are criteria of F-44 to show line item or not show?

Hello all,
I had reversed mm doc (from migo) with mr8m then I used f-44 for clear vendor account.
The fi doc that occured had no line item, please tell me how to know what criteria of situation that show or not show line item in fi document.
Thanks for advance,
Fon

Hi,
I have the similar case but opposite of that. When I use F-44 to clear vendor line items, it generates line itmes but I dont want system to generate it.
Kindly let me know the setting or criteria for the same.
Regards,
Niraj

In A/P Invoice line items is not showing.............

Hi All,
There is an A/P Invoice, with no line Items. But the Document Total is Rs. 100000/- When I check the Base Document there are 10 Line Items in GR(PO). Surprised to see this..............How is it possible. And when i open A/P Invoice base document icon also unable mode. Please do the needfull.
Arbaaz,

Hi Arbaaz !
As you told that you have tracked the base document with the help of users , that this particular GRPO is the base document of that invoice . Now have you checked the target document of that particular GRPO . Is this drag you to the invoice or this is also freezed ?
If the Target document icon is also freezed this means that your invoice is not at all linked to any GRPO , the invoice is made independently somehow ..
Thanks
Ashish

Purchase Order line item tax details not in IDoc ORDERS02

We are on ECC6 and using IDoc ODERS02, when viewing the purchase order in me23n, taxes are visible on the line item under the invoice tab. When we view the same purchase order via the IDoc that was created, the line item taxes are not being displayed in segments E1EDP04 and E1EDP05.
Is there some configuration we need to do to get the taxes info into the IDoc?

Hi Bill,
I think only price elements which have been set to "to be printed" in Customizing will be included into the Idoc.
Just a remark: ORDERS02 is an "historical" Idoc; ORDERS05 is the appropriate one for ECC6 (but this has nothing to do with your problem).
Regards,
John.

AIAB Error is showing profit center line item 001 not filled

Dear All,
In Asset Account while posting AIAB t.code system is showing error
Balancing field "Profit center" in line item 001 not filled.
Message no. GL2201
Diagnosis.
The profit center marked as balancing is not filled with any value in line item 001, even after document splitting
System response
The document cant be posted
Procedure
First check your entry.
additional causes could be:
.No value can be derived for this field from the current document data.
.You have entered a document type that is not designed for this business purpose.
previously it is coming correct now we are splitting two company codes means previously company code 0555 now we are splitting and creating another company code 0666 in that company only it is showing the error.
Regards,
Teja

Hi
Did you maintain cost object in your asset master
And does your IMG settings for the new co are in place to refer Cost Obects from asset master for Purchase and depreciation transactions
you do this in the IMG Step "Integration with General Ledger"
Regards
Ajay M

Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

Hi,
We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
We are configuring for the MM-SUS Scenario.
Now,to accomodate the Tax / Pricing we have installed the add on
component LOCINSUS and we are having doubts on how to use it:
1) Tax and pricing information are not flowing into IDOC- orders02
(e1edp04 and e1edp05 segments are not present in the created IDOC). The
condition print indicator in checked on ECC System and we have also
implemented SAP note 995986.
2)In create ASN transaction , we are not able to see the Excise Invoice
Number and Date field in Basic data tab as expected from SAP Library
document although we have installed the Localization Add on component.
Please help us to reso1ve these issues,
Regards,
Mani
099890-22217.

Mani,
Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
If you did resolve this issue could you please let us know how, much appreciated.
Bill.

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

TDS line items are not getting reflected in J1INCHLN

Hi Experts,
While generating TDS challan we are not getting advance line items in J1INCHLN screen
We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
Below is the example
XYZ                                                                         43,000.00
XYZ                                                                         46,000.00
Bank                                                                        96,329.00-
S/Tax Interim-In Cr                                                    5,160.00
S/Tax Interim-In Cr                                                   3,864.00
ST Interim E.C-In Cr                                                 103.00
ST Interim E.C-In Cr                                                 77.00
ST Inter H E.C-In Cr                                                 52.00
ST Inter H E.C-In Cr                                                 39.00
TDS Pble Contractors                                              966.00-
TDS Pble Contractors                                              1,000.00-
I checked the below possibilities for reason why its not getting reflected
Vendor master having recipient type
WITH_ITEM table updated with recipient type
In the line item also having Business Place and section code
Please suggest me is there any way to resolve the issue.
Thanks & Regards,
AIM

Hi,
Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
Regards
Divya S

F-54 Balancing field "Profit Center" in line item 002 not filled Message no. GLT2201

Hi,
During F-54 error "Balancing field "Profit Center" in line item 002 not filled" "Message no. GLT2201" showing.
I have gone through previous posts with message no. I got below solutions but those applicable belongs to EHP 600 but ours is EHP 605.
1. Note: 930365 not applicable for EHP 605
2. Note: 887794 correction process according to note applies max EHP 600.
3. http://wiki.scn.sap.com/wiki/display/ERPFI/Document+split+when+clearing+down+payment+with+taxes
My querrys are If i apply above 2 & 3 points solutions what will happen. However instead of creation of new "Document type" if i do configuration changes for existing document type "KA" what will the negative impact and risk.

Dear Mr Rahul
Thanks for your suggestion
but there's something odd about this..
the other company code is working just fine for years..
and i've already maintain configuration both for doc splitting especially the splitting rule and GSP_KD1
yet the error still occur
is there any suggestion Mr Rahul?
or anyone?
Best Regards
Rumi

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Line item taxes not showing in IDoc Orders02

Similar Messages

Maybe you are looking for