Line items are clubbed in Handling Unit's

There are two line items in delivery for same material , while packing I am selecting single line item and packing it . But when I select line item 10 and try to pack it, line item 20 also automatically getting clubbed with line item 10 and getting packed together .
For this material , rounding profile has been maintained .I canu2019t delete this rounding profile because when we process single line item for this material , system has to round off . Suppose , material is rounded off for 30 units in material master and rounding profile has been assigned for this material.
My requirement is handling unit need to be created for single line item , system should not consider 2nd line item while creating handling unit for first line item even though first and second line items consume same material .
In delivery, suppose , there are two line items for same material . for first line item quantity is 20 and for second line item , it is 23 .
When I try to pack it manually , system should create 2 handling units with quantity of 20 and 23 nos . System should not create handling units with quantity of 30 and 13 .
What configuration change I need to make in handling unit management .
Thanks In Advance
Jaya

Hi Pratyush
I have checked up in both the places, POP2 and POF2, target quantity was mentioned as 1 only for this material .
still ,Why is system not considering only one line item's quantity while packing . why is it clubbing both line items .
Pls help me ........

Similar Messages

Line item wise Qty in Handling Unit Management

Dear All,
I am working and testing Handling Unit Management. As per the client requirement, he wants Multilevel Packaging (Manually) for materials as-
E.g. 100 Pieces will be packed in 1 Small Carton.
       100 Small Cartons will be packed in 1 Big Carton.
       10 Big Cartons will be packed in 1 Pallet.
Now while creating delivery I packed 2 materials separately. And in the item level it is showing as a whole, means total 1100 PC packed in 11 Small carton, 11 Small cartons packed in 5 Big cartons and 5 Big cartons packed in 2 Pallets. Please find the below screen shot.
Now when I check this delivery number in tables LIPS-VBELN, it is showing the entire qty of Small carton, Big carton and Pallets as 11, 5, 2 respectively. But actually it has show each material or line item wise No. of Small carton, Big carton and pallet used.
E.g. For 1st material Small Boxes = 5
                               Big Carton = 2
                               Pallet = 1
      For 2nd material Small Boxes = 6
                               Big Carton = 3
                               Pallet = 1
My question is, is there any table or logic where I can fetch all these details for all material that how many packaging material and qty has been used. Because in packing list the same needs to get printed each line item wise. I checked in VEPO and VEKP table as well but not getting any input.
Kindly help.
Regards:
Abhishek

First of all, why you don't have any quantities assigned against Small cartons, big cartons and pallets?
Well, for your requirement. As functional consultant, you should be smart enough to interpret & analysis the data when you have tables and data in hand. Anyways, in your case,
As Pallet is the highest level pack material.
Pass HU no of pallet in VEKP- EXIDV, in your case for one of the pallet, it is 1000013558.
For that you will get, Internal HU no. VEKP-VENUM, say, 86.
Pass VEKP-VENUM = VEPO-VENUM.
With that you will get Lower-level HU, VEPO-UNVEL, that will be internal HU No for Big Cartons & VEPO-VEANZ for packing material quantity.
Then pass VEPO-UNVEL = VEPO-VENUM, by this you will get internal HU No for Small Cartons in VEPO-UNVEL & VEPO-VEANZ for packing material quantity.
Again, pass VEPO-UNVEL = VEPO-VENUM, by this you will get following info:
Table - Fields
Field Desc
VEPO-VEPOS
HU item
VEPO-VBELN
Delivery
VEPO-POSNR
Delivery Item
VEPO-VEMNG
Packed quantities
Try and share your feedback.
Thanks, JP

2LIS_02_ITM deleted line items are not reflected in BW

Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
Thanks

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

PRs with addition of only line items and Clubbing Service and Normal POs

Hi SAP Gurus
We are in ECC 6.0
in our buisness process The PRs are created by the Project system
they could create only one PR with the Same No and when ever a new PR is created it is adding up to the existing PRs line items where the line item has increased to 800 nos now,
also they are clubbing PRs of service and material PRs we need it to be separate
as service PRs and Mtrl PRs are processed separately by different Dept and cannot use the same PR which is here only One at the same time.
the line items are getting added eventhough the PR is released,
Pls tell me how the Above problem could be Solved.
Thanks and Regards
SATHISH

Thanks a lot Rakesh Pradhan the configuration works,
let me know is there any Links to the Document type of PRs to the Project system so as to create Separate PRs for Services.
is there any Complications by having different PR no for PRs every time. as the system was initially configured in this fashion and now as per the requirement we are bound to change the configuration, to separate SERVICE and Mtrl PRs.
Thanks and regards
Sathish

FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Dear Expert
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Hi,
It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
whereas FB03 screen shows different.
You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
Hope your issue has been resolved else revert.
Regards,
Tejas.

Line items are missing during transferring ITS to EBP--tricky problem

Hi,
We are using EBP 2.0 version.
Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
This is happening randomly.we had checked all the shoppping cart related tables in EBP.
For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
In account assignment table for this particular shopping cart only 3 items are updated except first one.
This is happening randomly for few of the shopping carts that too most of the cases first item of the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
I have debugged entire scenario,but i couldn't find the problem.
any one could you please advise me....why this is happening?whether it is a version problem?
Thanks,
Ravi

Hello Ravi,
I guess you already checked OSS notes for this.
Have you checked in the area of ITS ?
When ITS sends data to EBP, only the actual screen data is sent:
- item procurement data from basic data
- item accounting data from accountig tab
then this data is used to update the SC.
If you have debugged those 2 screens, you should see what is happening.
You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
Finally, there are two options:
- this is an ABAP error, so you should catch it in debug
- this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
Rgds
Christophe

TDS liability line items are not picking in u2013 J1INCHLN

Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubey

check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal

TDS line items are not Display in FB60

Hi Experts,
when in simulate a document in T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed. when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
why not shown in FB60 when simulating a document??

Hi
If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
Regards
Sanil Bhandari
<a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60

Asset Line items are not updating in table ANEP

Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
Naveen

HI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Special Ledger: Open Line items are not being loaded in BW

Hi all.
We are loading Special Ledger information from R/3 to BW, and for many accounts, the data is not reconciling between the two systems.
We have found out that none of the Open Line Items are being transferred.
Do you know which could be the cause for this?
Thanks and Regards

Hi Daniel,
Could you give some more details about the extractors and the "Open Line Items"?
-Bikas

Line items are not summarized due to taxes

Hi Friends,
According to note no:36353,I maintained settings in OBCY and sales revenues,deductions are summarized if my billing document(VF01) having above 999lineitems.But if my customer is liable for taxes, then revenues,deductions are not summarizing in accouting document if line items are more than 999 and I am unable to release it to accounting(VF02).
Can some one please advice me.
regards,
Seetaram

HI,
In my billing document (customer is liable for taxes)I have two tax condition types, one is JR1 & UTXJ, but both conditon type values are ZERO.So zero value is not posted to any G/L account.But my issue is when these two conditon types are appearing in billing document, I am unable to release billing document (VF02)to Accounting if more than 999 line items are there.
If above two conditon types are not there ( it customer is not liable for taxes)in billing document, I am able to release billing document to accounting if line items are more than 999.
someone please advice me.
regards,
Seetaram

Line items are not showing in fbl1n/fk10n

hello all,
Again i needs your help. this time i am not able to see the line items in fbl1n and fk10n. system shows 360 line items are displayed but no line item are showing in screen.In fk10n i am just able to see the period wise balance. but line item not showing. this issue is only with my 5 vendor. in case of other vendor, i am able to see as i wish.
please suggest me how to solve it.
regards
konishko

Hi,
check the Reconciliation of that vendor.for that recon account line display should be selected.
For other vendors, reconciliation account is with line item display .selected. That might be the reason to show line items for remaining items.
check GL master of Recon acccount.

Line items are not appearing in F-32

Dear All,
There is one unique issue that is being arised in our system where in the open line items are appearing at the time of customer line item display, but when we go for clearing these line items only some documents are appearing and some documents are not appearing at all.
Is there any reason that documents does not appear while clearing where in still the same is appearing as a open line item in customer line item display.
Regards,
Rupa.

hi,
as seen from above mails,
entries are existing in BSID table
entries are passed as part of period end closing entries
entry passed in month end and reversed in next month
proposed sol
1. check the mode of passing the entry in tcode
if tcode is coming from FBS1 the entries will not appear in F-32
if 1 entry in FBS1 and other entry in F-32 then automatic reversal entries were not passed.
there was manual entry.
that is the reason 1 entry in FBS1 and other in F-32.
Thxs,
GB

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Line items are clubbed in Handling Unit's

Similar Messages

Maybe you are looking for