Line items are not showing in fbl3n,fs10n,faglb03,fagll03

hi experts,
i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account. At the same time, you use line item management with this account" and"Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected"
i do not understand the system response. can anyone please help me to solve this problem?
thanks &regards
konishko

sir
thanks for your reply. as per your suggestion i am trying to change in fs00 to uncheck the line item management but i am unable to do that,system shows that i have to uncheck the open item managemt also but the said account contain the open item. so i am not able to change the same. is there any other way to do that. can you please suggest me in detail? and one more thing that i am able to see only the balaces in fs10n. but not able to see the line item.this is probably for missing the business area in line item.
but i needs to see the line items.
can you please tell me any alternate way in detail to solve this problem?
thanks and regards
konishko

Similar Messages

Line items are not showing in fbl1n/fk10n

hello all,
Again i needs your help. this time i am not able to see the line items in fbl1n and fk10n. system shows 360 line items are displayed but no line item are showing in screen.In fk10n i am just able to see the period wise balance. but line item not showing. this issue is only with my 5 vendor. in case of other vendor, i am able to see as i wish.
please suggest me how to solve it.
regards
konishko

Hi,
check the Reconciliation of that vendor.for that recon account line display should be selected.
For other vendors, reconciliation account is with line item display .selected. That might be the reason to show line items for remaining items.
check GL master of Recon acccount.

Tax Line items are not showing seperately as per exp in FB60

Hi,
In FB60, I have booked the two expenses with tax code separately. While simulating the entry the tax lines are not showing separately as per expenses. For example:
Suppose my tax code = AB which is equal to 10% maintained in FTXP.
At present entry is coming as follows through FB60 is:
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               100
Credit     Vendor               1000
But we need the entry is follows
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               50
Debit      Tax               40
Credit     Vendor               1000
But I change the tax code for second line AB to XY then calculation of tax entries shows separately according to expenses.
Please let me know where did I do the mistake in configu2026u2026..
Regards,
Babjee

Hi!
Normally, all amounts being posted to the same GL Account and determined from the same tax code as automatically derived, will generate one common auto-generated line item. This is because tax reporting is usually based on tax code (external/tax reporting) and or GL account (internal/financial reporting).
In your first case since the tax code used for both line is the tax code was the same, it would be posting to the same GL Account - hence a common line item got auto-generated.
Check the Account Key and Assigned GL Accounts in T.Code FTXP. Additionally, check the Condition Type set-up (identified from FTXP) in T.Code SPRO / from menu IMG node Check Calculation Procedure.
Regards,
Ruchi

Reg: Certain Open Items are not showing in open item clearing F-44

HI all,
I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing. i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
with regards
JK Rao

Hi,
Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator you might not be giving here.
reward pts if useful
regds

Asset Line items are not updating in table ANEP

Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
Naveen

HI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Line items are not coming on next page in Bill of Lading

When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
Kindly help me to resolve the issue as it is very critical.

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

HI
Sidhu
Tanks For Ur Replay
i am doing as for u r note..
AFTER DEBUGGING....
function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
WI_LIST_S
WI_LIST_E
WI_LIST_F
STATUSFILTER
TASK_FILTER
yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
CAN PLEASE HELP ME
HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
TANKS
RAFI SHAIK

Reg Batch in delivery some items are not showing gross weight please help

please give me your help
in Deliveries some items are not showing gross weight
please give me some help

Dear Ramsuresh,
Check are maintaining gross weight in the Master data of those items or not.
If not maintain in the Material master then create delivery
I hope it will help you
Regards,
Murali.

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

On the iPad tap Settings > iCloud
Toggle Documents & Data off then back on then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the box next to Documents & Data then reselect it then restart your iMac.

2LIS_02_ITM deleted line items are not reflected in BW

Hi,
Our current Data flow 2LIS_02_ITM-->DSO-->CUBE.
I am analyzing a Invoice, When it is created 01.04.2014 it has got 10 Line Items and all the data is load to BW,Invoice with 10 Line items.
In ECC I can now see the same Invoice only got 5 line items and from change log I can see 5 line items are deleted on 15.04.2014.These changes are not reflected in BW.In BW invoice data still shows 10 line items.
If I perform setup table job and ECC RSA3 for that invoice I am getting only 5.
I believe it’s something to do with 0RECORDMODE,Can you please let me know how to fix this in BW.
Thanks

Yes this is a known behavior in case of deltas.
For Deleted line items Rocancel field will have an entry with R.
To handle this you need to map ROCANCEL field in Technical group of transformation (Between Datasource to DSO) with 0Recordmode.
Once you will do that then after activating the data in DSO it will nullify the records and deleted order or item will not appear.
Regards,
AL

TDS liability line items are not picking in u2013 J1INCHLN

Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubey

check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal

TDS line items are not getting reflected in J1INCHLN

Hi Experts,
While generating TDS challan we are not getting advance line items in J1INCHLN screen
We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
Below is the example
XYZ                                                                         43,000.00
XYZ                                                                         46,000.00
Bank                                                                        96,329.00-
S/Tax Interim-In Cr                                                    5,160.00
S/Tax Interim-In Cr                                                   3,864.00
ST Interim E.C-In Cr                                                 103.00
ST Interim E.C-In Cr                                                 77.00
ST Inter H E.C-In Cr                                                 52.00
ST Inter H E.C-In Cr                                                 39.00
TDS Pble Contractors                                              966.00-
TDS Pble Contractors                                              1,000.00-
I checked the below possibilities for reason why its not getting reflected
Vendor master having recipient type
WITH_ITEM table updated with recipient type
In the line item also having Business Place and section code
Please suggest me is there any way to resolve the issue.
Thanks & Regards,
AIM

Hi,
Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
Regards
Divya S

Line items are not showing in fbl3n,fs10n,faglb03,fagll03

Similar Messages

Maybe you are looking for