Line items missing in RFC table when they are more than one!!!

Hi All,
I am doing a scenario where i map a proxy from SCM to a RFC in R/3.
The problem i am facing is my proxy has more than 1 line item for a purchase order but in R/3 the RFC table contains only the first line item.
Is there any special mapping that i need to do to capture multiple line items in a PO.
Regards,
Jayaram.M

Hi,
When you do the mapping, test it with the payload and see whether you are able to generate multiple line items in the target.
Next check how you are passing it to the RFC, whether as a single line item or as a table.
If in the mapping you were not able to see the multiple line items, check your context changes accordingly.
Accordingly you can check.
Regards
Krish

Similar Messages

BB stripping recipient name/address when they are more than one in TO or CC

Have a very perplexing problem. My client cannot see more than one
recipient name and/or address at the TO and CC lines on his
blackberry, but he sees them ALL in Outlook.
I can send to his [email protected]
account, and he
sees them in Outlook AND on his Blackberry.
When I send to him on his [email protected] , he only sees 1
name and/or address at the TO and CC line on his blackberry, but sees
ALL recipients names and/or address in Outlook?
I have looked at the messages in Exchange Message Tracking and I can
see them hitting the server with the additional recipients (after the
first name) removed when the SEND TO address is
[email protected] .
On some emails, he may have been the third name in the SEND TO list,
and when he sees them on his Blackberry, it only shows the first
persons name so if it wasn't him, he doesn't even see his name listed?
There is not filter on his account and he is the only one with this
problem. He has a Blackberry Curve.
Rogers is no help....they just keep saying it's Exchange.
Any ideas?

what happens when that person does a "reply to all" from his/her blackberry device ? who are the different recipients ?
can that person send a message to several To: from his/her device ?
did you do the soft reboot or the hard reboot ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8.

My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.

2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that.

When I have more than one tab open, if I click on a picture to view, when the window opens to view the photo, firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason.

When I have more than one tab open, if I click on a picture to view/enlarge, say eBay, and I click on the items photo to enlarge it, when the window opens to view the photo, Firefox crashes. I also notice while looking at a web page, the pinned tabs to the left of the bar are constantly reloading for some reason, The green circle starts going round and round for no reason even though the tab is not being viewed. Both problems seem to have started after the last software update.

See:
* http://kb.mozillazine.org/Firefox_crashes
* https://support.mozilla.org/kb/Firefox+crashes

Bug? My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future.

My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future even though I can see them on the month, week and day view. Any suggestions on how to fix it? I've tried it all. I called the apple support and they checked on their iPads. They all did the same and they couldn't help me. They suggested trying this way. I'd like to be able to plan a few years ahead and the year view would make thing so easy!
Is this a bug?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

When I open more than one tab with ikls.ru web site - safari freeze immediately.

I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.

In safe mode the same problem in Safari. And I couldn't enable the guest account. You can see an attached pic. It's in Russian, but I think it's clear. I took a pic in a safe mode, but in normal mode it's the same.

I use Exchange to sync my iphone4S with Outlook. On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

i use Exchange to sync my iphone4S with Outlook. On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

I have loaded my Firefox bookmarks into Internet Explorer Favorited. I also uninstalled Safari.
I go to iTunes on my phone and see no wat to connect my iPhone to my laptop. I see Music, Shows, etc., the kind of stuff I would expect, but no clue as to how to proceed.
Would you please be so kind to fill me in on how to "That syncing is done via iTunes. Connect the device to iTunes, select it, then go to the Summary page and select to sync bookmarks."?
I am not sure what you mean by "Summary Page"
Thank you

Pen pressure sensitivity stops when I have more than one window open

I recently upgraded to Flash CC and have noticed some new bugs. Here's one of them:
When I have more than one document open at a time, my pen pressure sensitivity stops working. In fact, it seems to work on the newest opened document, but will stop working on any previosuly opened documents. If all but one document is closed, the pen pressure returns.
I'm using Windows 8, and a Cintiq 21UX.
Steps to reproduce:
- Launch Flash.
- Open a new document.
- Select the "Brush" tool.
- Toggle "Use pressure" in the tool bar.
- Draw something to make sure the pen pressure is working.
- Open a new document.
- Draw something to make sure the pen pressure is working.
- Return to the previous document and attempt to draw.
- Notice how the pen pressure is absent.
Any help or suggestions would be great. Thank you.

No problem. I've been using older versions of Flash until CC gets the bugs squashed. This pressure issue is a deal breaker for my coworkers and me, and also this audio one: http://forums.adobe.com/message/6013488?tstart=0

Constantly get beach ball when I have more than one program open

I am get a slow machine and beach ball going when I have been using the computer for a while with a couple of programs open. I have 4MB of Ram and running 10.8.5.
Any ideas at what to look at first?
Thanks

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
     cursor c_mar_principle(b_entry in number, b_book in varchar2)
     is
          select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
          from   MARRIAGES mar
          where mar.entry   = b_entry
          and    mar.book = b_book
          order by principle desc, id asc;
     rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM   := rec.surname;
:P16_FORNAME_GROOM   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE   := rec.surname;
:P16_FORNAME_BRIDE   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;

rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered)

Airport disconnects when there's more than one device

I've got a really weird problem.. I have an Apple Airport Extreme 802.11n 3rd Generation. Software version 7.6 When more than one device connecrts to the base station it will disconnect everyone and then all devices will go into a connect/disconnect loops. Rapidly. This occurs only with wireless device. I watched the radar on my iPhone (5.1), Macbook running Snow Leopard, Macbook Air running Lion, and iPad 2 (5.1) blinking on and off, on and off. The only way to resolve this is to just have ONE person connect at a time.
Things I've tried:
1) Updating all software on all devices
2) Updating Airport firmware
3) Reboot and then restoring factory settings on the Airport when the reboot didn't work
4) Turning off encryption (WP2)
5) Making sure there are enough IP's for all the devices, turning off robustness, making sure the router is visible.
Because I know someone will ask this: The Airport sits atop a credenza in the open air. Nothing on, around, or above it. It's been in this position for months with no problem. It's not overly warm to the touch and I even used compressed air to blow out the vents (just in case) when this problem began.
I read once upon a time that the router gets a cache built up and that can cause these types of issues, but I have no idea how to delete said cache or even if it exists. It's just odd this only happens when more than one wireless device tried to connect to the network.
Thoughts?

I've resolved this! For some odd reason Apple won't let me denote this so I'm adding this reply. Turns out the problem was POWER related. The Airport was plugged into a power strip with several other devices. I unplugged all of those leaving just the Airport and the problem has not returned. If I add on all the devices, regardless of the power strip used, the problem returns. So it appears the Airport was just not getting enough power.
I've got it on a UPS now and the problem has not returned.

Netflix iPad app: Can't scroll seasons when there are more than nine (9)

Using the latest rev of the Netflix iPad app, I go to watch a TV series like South Park or Top Gear (UK). If I want to watch episodes from another season/series, I tap on the appropriate dropdown. Since the dropdown only shows nine seasons, and South Park and Top Gear both have more than nine, I need to scroll to see the rest. However, when I attempt to slide my finger up/down on the list of seasons, it does not move/scroll.
I've made sure I'm on the latest rev of the Netflix iPad app, I've deleted the app and reloaded it, and I've reported this issue to Netflix. Netflix claimed they have not heard of it before.
I'm on the first iPad (hardware), for what it's worth.
Hope someone gets it fixed!
Thanks,
ljfrench

Just called netflix and reported same issue. Son is trying to scroll down to seasons past nine on south park and family guy and only scrolls screen in background and not drop down menu of seasons. Reported this to netflix and was told they have never heard of it before
Went on to explain I tried this with my iphone 4, wifes iphone 3 and my sons ipod touch. All with the same result. Both daughters also have iphone 3 and will check tomorrow, but i'm sure the same result.
Workaround is to go to website and choose season and episode there which then opens in the netflix app. Huge pain though. Disappointing they still act like this doesn't exist.

Ttcserver restarts when there are more than 5 c/s connections

Hi,
I am having some problem with C/S connection.
When more than 5 c/s connections are connected to datastore, ttcserver restarts.
No applications are running. Only tried to connection with c/s mode.
Message logs are like below.
## tterrors.log
2010-04-21 15:52:56.36 Warn: : 4891: TimesTen Daemon Release 11.2.1.4.0.tt1121 started.
16:11:46.18 Warn: SRV: 4902: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.18 Warn: SRV: 4917: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.18 Warn: SRV: 4925: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.18 Warn: SRV: 4913: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.18 Warn: SRV: 4921: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.18 Warn: SRV: 4909: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.29 Err : SRV: 4926: EventID=99| ttShmCreate: shmget(1560567862, 1048576, flags) failed with system error 17
## ttmesg.log
16:11:45.16 Info: SRV: 4925: EventID=16| Connect succeeded from client: jjwas1 (was1); IP address: xxx.xx.xx.82; Client PID: 4143; DSN: tt; UID: dba
2010-04-21 16:11:46.18 Info: : 4891: maind 6: socket closed, calling recovery (last cmd was 8)
16:11:46.18 Warn: SRV: 4902: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
2010-04-21 16:11:46.18 Info: : 4891: Starting daRecovery for 4896
16:11:46.18 Warn: SRV: 4917: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
2010-04-21 16:11:46.18 Info: : 4891: Finished daRecovery for pid 4896.
16:11:46.18 Warn: SRV: 4925: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
2010-04-21 16:11:46.18 Info: : 4891: maind 10: socket closed, calling recovery (last cmd was 9)
16:11:46.18 Warn: SRV: 4913: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
16:11:46.18 Warn: SRV: 4921: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
2010-04-21 16:11:46.18 Info: : 4891: Starting daRecovery for 4896
16:11:46.18 Warn: SRV: 4909: EventID=99| Main server has unexpectedly exited; child server exiting and client connection terminated
2010-04-21 16:11:46.18 Info: : 4891: 4896 ------------------: TimesTen Server exited
2010-04-21 16:11:46.18 Info: : 4891: Spawning '/memdb/TimesTen/tt1121/bin/ttcserver'
2010-04-21 16:11:46.18 Info: : 4891: Spawned new process, idx 5, handle 0x133e=4926
2010-04-21 16:11:46.18 Info: : 4891: Finished daRecovery for pid 4896.
2010-04-21 16:11:46.19 Info: : 4891: child 4896 gone, terminated with signal 11, core dumped
When i faced it at first, thought shared memory will be a problem. But enough physical memory and enough shmmax(or other kernel).
Also created other datastore with large size of perm size and worked ok.
Any idea why this is happening? Seems like log mesg with -verbose mode does not gives any clue to me....:(
* x86-64bit Solaris10
* ttversio : TimesTen Release 11.2.1.4.0 (64 bit Solaris/x86)
Best regards,

Hi Adam,
Yes, I opened a SR with this issue.
Was wondering anyone else had a similar exprience.
regards,

PE9 Organizer (mac) - thumbnails disappear when there are more than 5 columns

The thumbnails in my Organizer are slow to load, and if I move the slider bar to the left to show more thumbnails they are replaced with the hourglass, and the comment 'building thumbnails' appears bottom left. The thumbnails do not reappear unless I increase the size to five columns or less.
I have disabled media analysis in preferences; I have run a repair on the catalogue; I have selected all the photos and selected 'update thumbnail'. None of this has helped.
I am running PE9 on a Mac, and have about 20,000 photos in my catalogue.
Can anyone help?

Until the Thumbs are completely generated I have the same problem. After they are all generated all is okay. This only happens after I bring in very large folders of photos. Also, look at the space just to the right of the date in the bottom left corner of the screen. If the software is busy you will see a spinning wheel. Any time it is spinning the software will be very slow.

Line items missing in RFC table when they are more than one!!!

Similar Messages

Maybe you are looking for