Line items transfter one gl to another gl

Dear Expers,
Please guide me, i have one gl code without Openitem management i have posted some entries also, now i want to activate Open item management, i have tried to activate through program but it is telling line items are there.
how to transfter that line items to antother gl code and after activation again i need that line items in the same gl code.
how to process, please help me.
Regards
chandu

Hello,
SAP recommends to set item management for an account in the standard
way as follows:
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Customers are encouraged to follow the mentioned message in the popup
box to convert their account to OI mgt.
Up to release 45A, there was a report RFSEPA02 to switch on open item
management. With this report you could set the flag open items
management for documents posted before the change in the master record.
However, this report is no longer supported as of release 45A as the SAP note
175960 describes. Nevertheless, you can get this functionality following
the steps described in the note. This is valid for your case if
you are on ECC 6.0.
So, if you still want to use this program to convert your accounts
and do not mind the fact that the same is no longer supported by SAP,
this action will be at your own responsability.
Please, for further information, refer to the SAP note 175960.
FAGL_ACTIVATE_OP is available from ECC6.0 / Enhancement Package 3. This transaction can do the work for you.
REgards,
REnan

Similar Messages

Reposting of Planned Line Items from One Cost Ctr to another

Hello SAP Gurus,
Can you tell me the process hoe We can repost planned line items from one coct center to another ?

Hi,
You can use Transaction code KP06 to update the changes to the plan data for the Cost Centers. There is no separate transaction code to repost plan data for Cost Centers.
Thanks
Murali.

How to copy line items from one expense report to the next

I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry.
Is there a way to copy the employee-paid expenses to the GetThere-generated trip entry expense report, i.e. just copy the line items from one expense report to another that already exists. I guess that would be a merge function.

Hi Tom,
Here are two alternative solutions:
Alternative 1:
If you copy the expense report before you book the services (flight, hotel …)
in GetThere, then the airline or hotel bookings will not start a new expense
report but will be assigned to the copied expense report.
Alternative 2:
This alternative is a bit laborious.
Shift the start date and end date of the expense
report that was automatically created by
your flight booking for next week (e.g. Calendar Week (CW) 47) to the week after next week (e.g. CW 48).
Copy the expense report of the previous week (e.g.
46)
Afterwards open the expense report that you
moved to CW 48 and click on the tab strip itinerary
Now assign the bookings (flight, hotel …) to the
expense report of CW 47 by clicking on the button assign to existing trip
Later delete the expense report in CW 48
Get back to me if you have any questions concerning the alternatives outlined
above.
Note:
These solution alternatives are only available for customes using HTML5 UIs.

Transfering items from one customer to another customer

Hi Gurus,
I have a requirement where we have to transfer the items from one customer to another customer in the same company code.
We should also be clearing the items from the old customer as part of the transfer.
Is there a way/transaction in ECC 6.0 to achieve this.
This is not a one-time transfer and the business would like the option of doing it every period (on a case to case basis.) so any standard SAP (transaction) way of doing it would be preferred.
Best Regards
ew

Dear,
SAP provides you F-51 t code to post transaction with clearing.
Select radio button transfer posting with clearing and press choose open item button. Give customer name whose blance is to transferred and account key as D. Press process open item and in next screen select line items which needs to be posted. Proceed further give other customer number with posting 01 and do the transfer. Hope it will help
Regards

Standard program to transfer open items from one vendor to another

Hello to you all,
Does anyone know of a standard program to transfer open items from one vendor to another,
Thanks
Yoav

Hi,
i dont know whether there is any program but there is one t.code which is meant for one of this purpose.
We can do the same through F-51 also. First specify the document header information. for the first line item specify the customer debit or credit posting key, vendor number, and special gl if you want (Here you have to give vendor number to whom you want to transfer) press enter
in this screen specify the amount. and go to Choose open items new screen will come
Specify the vendor number and in additional selections choose document number and then click enter. the one line item only appear here then go for simulate. if required specify the narration by double clicking on the line item.
hope this is clear,
Regards,
Sankar

How to transfer a calendar items from one month to another

How can one transfer a calendar item from one month to another month by drag and drop.

Click it and hold, then drag. If you want to duplicate it, hold down the option/alt key while dragging.

Is there a way to move multiple Calendar items from one date to another?

Hello. I have far too many Calendar items every day in my iCal. Until I finally pare them down to a reasonable level, I need to "reschedule" all of my unfinished ToDo items and reminders, to another day, later in the week.
There doesn't seem to be any "Select All" feature available.
Is there a way to move multiple Calendar items from one date to another?
Thanks in advance!

Still no ideas? Apple, please come up with a fix. Thanks.

A/R transfer open items from one payer to another

Hello,
has someone transferred open customer invoice items from one payer to another after the new payer was associated with the customer as a partner? which transaction to best use?
thanks a lot
Patrick

Hi Andreas,
unfortunately I didn't succeed in posting the transfer. somehow I seem not to be able to pick up the items for clearing in order to transfer them to a new invoice, although I can see them in the open item list. Would you have any hints on how to pull the old invoice into the posting and then create the new one in the same posting?
thanks a lot
Patrick

Transfer items from one calendar to another (on iMac)

I have a question: how can you transfer all the items from one calendar into another calendar? I thought I had come up with an ingenious solution, but it didn't work (see below).
Years ago, I set up a calendar for my wife and I to use as a "family" calendar. After uploading iOS8, I decided to try transfer all the calendar items from our "family" calendar to the newly created Family calendar. I used the Export command to export all the items in the "family" calendar, and then the Import command to bring them into the Family calendar. BAD IDEA. I got a dialog box telling me the items could not be imported because they were already on the iCloud calendar. This dialog box had to be dismissed by choosing either "Ignore", "Try Again", or "Revert to Server". This dialog box popped up FOR EVERY CALENDAR ITEM. At first I thought I was in an endless loop. I finally put a stapler on my keyboard to hold down the Return key to dismiss the dialog boxes. Even then, it took several minutes to clear the dialog boxes. Apparently, I learned how NOT to transfer items from one calendar to another.

Okay. I have answered my question. The key is to actually read and follow Apple's instructions (i.e. delete the original calendar AFTER exporting it, but BEFORE importing it into the new calendar.)

Transfer Items from one warehouse to another

hi,
i have to transfer Items from one warehouse to another warehouse.
i have a item which has 3 quantity in warehouse1 now i find that this item belongs to warehouse2 ,i want to shift all it's quantity in 2nd warehouse as well as sets warehouse2 as default warehouse for that item.
Regards

Hi,
Check this, it will help your query :
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/0c/87353e7a069028e10000000a114084/content.htm
Regards,
Jitin

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

How to copy List item from one list to another using SPD workflow using HTTP call web service

Hi,
How to copy List item from one list to another using SPD workflow using HTTP call web service.
Both the Lists are in different Web applications.
Regards, Shreyas R S

Hi Shreyas,
From your post, it seems that you are using SharePoint 2013 workflow platform in SPD.
If that is the case, we can use Call HTTP web service action to get the item data, but we cannot use Call HTTP web service to create a new item in the list in another web application with these data.
As my test, we would get Unauthorized error when using Call HTTP web service action to create a new item in a list in another web application.
So I recommend to achieve this goal programmatically.
More references:
https://msdn.microsoft.com/en-us/library/office/jj164022.aspx
https://msdn.microsoft.com/en-us/library/office/dn292552.aspx?f=255&MSPPError=-2147217396
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Move workbook item from one sheet to another

I wonder if anyone else has come across this one...
According to SAP Help it is possible to move workbook design items from one sheet to another (see http://help.sap.com/saphelp_nw70/helpdata/en/54/a493f7256b43698191a2623e5a0532/frameset.htm
which says:
To move a design item, enter different values for the coordinate or both coordinates. To move an item to a different sheet, prefix the values with proper syntax to designate the sheet. To move an item from Sheet1 to Sheet2, for example, enter a value such as Sheet2!$E$5:$G$6.
However, every time I have tried I get program termination. Has anyone else managed to do this, or experienced the error (and even better, solved it!)?
Best regards,
Patrick
PS. I'm still on the lookout for anyone who has completed a satisfactory upgrade of workbooks to version 7... please do get in touch if you have - it might just provide a light at the end of the tunnel!

No answer, but I managed to get it to work in the end (albeit painfully). I would be interested to hear from anyone who is currently working with version 7 workbooks, to understand whether you find it a workable solution. We opted to remain with version 3.5, having spent several months investigation version 7.

I would love to be able to drag and drop items from one page to another from the plan window. Is that possible?

In desiging my website, I would like to be able to move items from one page to another by dragging and dropping from the plan architecture screen. It might also help if the window could have a zoom in and out feature to facilitate that.

I just tried zooming in the plan window and discovered it works.

Transfer of Vendor Line Items from One Co CD to another Co Cd -- urgent

Hi Peers
We have a situation wherein we are going for a new company code from the existing company code. so we have to recreate all the customers & Vendor master data. Is there any T.Code or Program by which we can create the customer & vendor master data.
My second query is, is there any T.Code or other program by which, i can copy line item wise transactions of the existing vendor to the new vendor in the new company code. Like wise customer line item details as well.
Note: The Chart of accounts of both the new co. cd and the old co. cd is the same.
Its a bit urgent
Expecting your reply ASAP.
Regards
Rajaram

Hello
Data migration from one company code to other company code relates to 2 objects.
First ensure master data is copied to new company code.
Copying master data is simple and in most cases automatic.
It is merely extending data from old company code to new company code.
Now comes thetransaction data.
You have 2 choices. One is an interface program, which performs both download from old CC and upload to new CC.
The second is LSMW.You would require 2 programs. One is data download and the other is data upload program.
Mapping data fields is not an issue because, bothe are SAP systems and presumably within the same client.
Lastly, you need an ABAPer to work on this. Sit and resolve.
Reg
assign points if useful

Line items transfter one gl to another gl

Similar Messages

Maybe you are looking for