Line level approval for Vouchers ?
Hello,
Can someone tell me whether it is possible to have vouchers approved by Line. Meaning different approvers for different voucher lines?
If yes, where can I find how to do it?
I tried adding the Line Level in the Transaction registery for the process ID VoucherApproval and I could select 'Line' in in my approval process setup but I always get the message 'No approval required'...
Regards,
Stijn
Hi Mano,
if you use approval. It will be approved by steps. Next step will not be started until previous completely done. In your case 1st Item should wait until all other items processed.
Regards
Konstantin
Similar Messages
-
Is it possible Line level approval for purchasing requisition in AME?
hi
is it possible Line level approval for purchasing requisition in AME?
so that send each line to separate approver ?If using AME, it should be possible. Check AME Guide for POs for details. Let me know if you run into issues.
Thanks
Shree -
Is it possible Line level approval in AME for purchasing requisition?
hi
is it possible Line level approval in AME for purchasing requisition ?
so that send each line to separate approver ?If using AME, it should be possible. Check AME Guide for POs for details. Let me know if you run into issues.
Thanks
Shree -
Custom AWE Line Level Approval Issues
Has anyone had success creating custom AWE Line Level Approval? I’m having trouble trying to get the method for line approval to fire. I have header level working so I decided to dig deeper. I added the line keys to the Xref table, Updated the Registry, Configured the Events, and created a new Process Definition using line level (very simple “Always True”). I have seen OnProcessLaunch fire so my routing has begun. The graphics look good. But when my approver goes in and hits the Approve button, it saves and nothing happens to the approval. Tracing it shows that no methods are firing. How does the system know to fire the line level method vs the header level method? Any ideas are appreciated.
ThorLine 14: radioChange resolved - I had named my radio button
the same as the id of the field I was trying to update.
because you can't see the generated source it did not jump
out at me. then I backed some code out and my radio button lit up.
for a second I could not figure out for the life of me why
it would do that. then I remembered that in IE it will also use the
name in the getElementByID. -
N level-Approval for contract workflow (WS14000148) in SRM
Hi SDN'rs
I want to activate N level-Approval for contract workflow (WS14000148) in SRM
When I am creating the contract in SRM I can see the approvers in the approval preview.
But when I release the contract and look at the approval privew there are no approvers
and the status of the contract is released.
We are on SRM Server 5.5 and SP 07.
Here what I did
1. I implemented the BADI 'BBP_WFL_APPROV_BADI' using the sample implementation and populated the approvers.
2. I activated events SAVED,CHANGEVERSIONSAVED for WS14000148 in OOCU transaction.
3. I see event linkages for WS14000148 for both events SAVED,CHANGEVERSIONSAVED in SWE2 transaction.
4. I assigned role SAP_EC_BBP_PURCHASER to for subworkflow N step for contract WS14000147.
( User who is creating contract has this role)
5. Consistency check for WS14000148 is green and WS14000147 is yellow in SWUD
6. Event simulation for BUS2000113 and events SAVED,CHANGEVERSIONSAVED shows WS14000148 successfully started.
I see dump in ST22 with errors TSV_TNEW_PAGE_ALLOC_FAILED and SYSTEM_NO_SHM_MEMORY with WF-BATCH is this any thing to do with that?
If any one know what are the steps I am missing please let me know.
Thanks
A SHi
Please refer to these OSS notes which might help.
<u>Refer to following OSS Notes -></u>
Note 735026 - Memory problems at BBP_GETLIST_INDEX_FILL
Note 932836 - BBP_GETLIST_INDEX_FILL: Activation not possible
879528 WS14000148: Send mail to initiator incorrect
901200 WS14000148 dia wrk item despite NO_FURTHER_APPROVAL_NEEDED=X
879873 BUS2000113: The Object_ID attribute may be empty
903015 BAdI Workflows: Events and parallel steps
901068 BAdI Workflows: Enhancement of Note 896556
769458 Dynamic workflows: No adjustment after document change
972757 Occurence of the SYSTEM_NO_SHM_MEMORY runtime error
741864 FinBasis: Termination TSV_TNEW_PAGE_ALLOC_FAILED
864473 Deactivating the shared memory when searching by prefix
928642 Container factory: Shared memory dump update
Refer to these links.
<b>http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/26/0f8b41ed891609e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f7/a6a3415e34b05fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6b/eca441eea7ef0be10000000a1550b0/frameset.htm
</b>
<u>Also raise an OSS message with SAP as well.</u>
Regards
- Atul -
How to Implement N-Level Approval for Bid,Live Auction,PO,Contract ?
Hi Experts,
I am new to SRM 5.0. My requirement is how to implement N-Level Approval for Bid, Auction, PO and Contract? Which steps should I follow for N-Level Approval? Can any one send me sample code and name of BADI where I have to implement the code.
Abhijeet PanseHi
Please check for <b>BBP_WFL_APPROV_BADI</b> using SE18 transaction for relevant Code as well and standard SAP documentation.
Related sample code and other useful pointers ->
WS14500015 is not working for Multilevel approval
Re: SRM / Shipping cart
Re: N Step Approval BADI - BBP_WFL_APPROV_BADI
Re: N-step BADI workflow
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/17/40a86c773d6c41801d78af1a34b90f/frameset.htm
Multiple Implementation For BBP_WFL_APPROV_BADI
Re: Help needed on N-Step Approval WFL for SC
Re: N-Step 14000109 workflow - Unable to identify Approvers
Do let me know.
Regards
- Atul -
Hi all,
I am supposed to make an EP workflow for 2 level approval for absences or leaves. I am using a copy of workflow WS12300111. I am able to get the single level of approval, but not the second level. When the request goes to the second approver ( which is the supervisor of first approvar), it shows the leave requests of the first approvar and when I check the workplace of the employee who applied for the leave, his leave has the status 'approved'.
In other words, when the first supervisor or approvar approves the request, it gets approved and second approvar has no option to approve it again. Please suggest what to do?
In my tasks for approval, I am using the class - CL_PT_REQ_WF_ATTRIBS and the method APPROVE. Is that correct???
Is there any other standard workflow which I can refer to?
ThanksDear Raja Sekhar,
I create a sampel program with the following code in SE38 and put in the following code. However, it seem that it does not work and the status did not get updated.
Do you know what is the problem?
DATA:
request TYPE REF TO if_pt_req_request,
event TYPE tim_req_xfer_event VALUE cl_pt_req_const=>C_REQTRANS_APPROVE,
req_id TYPE PTREQ_HEADER-REQUEST_ID value '48561480F033007EE1008000C0A8D282',
status type TIM_REQ_STATUS.
CALL FUNCTION 'ENQUEUE_EPTREQ'
EXPORTING
mode_ptreq_header = 'E'
request_id = req_id
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
CALL METHOD ca_pt_req_header=>agent->get_request
EXPORTING
im_request_id = req_id
IMPORTING
ex_request = request.
CALL METHOD request->initiate_state_transition
EXPORTING
im_transfer_event = event
im_event = event
IM_RET_VALUE = 0
IMPORTING
ex_new_status = status.
CALL FUNCTION 'DEQUEUE_EPTREQ'
EXPORTING
request_id = req_id.
Thanks
Regards,
Bryan -
Multiple level approval for overall PR release
Hi all
is there a template for multiple level approval for overall PR release ?
is there some alternative if there is no template ?
thanks in advance .
Naval BhattHi NB,
there is no std template for multiple approvers for PR release.
Create a copy of std template and implement ur logic to it.
Aditya -
Line Level DFF for a quote using user hook method
Hi ALL,
My requirement is to set default value in line level DFF for a quote using user hook method, so please suggest me how to achive this, i have checked the API "ASO_QUOTE_CUHK.update_quote_pre " but not successed please suggest.
ThanksHi Dipanjan,
Thanks for reply, do u have any idea how to achieve thsi through user hooks or any APIs so that i can place the default value to the corresponding DFF field.
Thanks
Edited by: user13424229 on Jan 22, 2012 11:52 PM -
Line Item Level Approval For SC-SRM7.02
Hi Experts,
I am working on the line item level approval based on cost center. can some one help me in achieving this?
i have few doubts regarding this
1) we are using application controlled workflow is it feasible to achieve this functionality ?
2) will separate PO will be created for each line item?.
some pointer would be really helpful.Hi Mano,
1. Yes, but would suggest to use new process controlled workflow.
2. No, Cost center is not a split criteria for PO creation. Of course you can overwrite it with ABAP.
Regards
Konstantin -
Line Item Level Approval For SC-SRM7.02-WS14500015
Hi Expert,
I am using workflow template WS14500015 for line item level approval.i have few doubts on this
i am using cost center based approval, so if the 1st line item is approved will it generate a PO or will it wait for the entire shopping cart to be approved.Hi Mano,
Are you using application controlled workflow or process controlled workflow?
For process controlled workflow you can refer to the SRM 7.0 Workflow guide:
https://websmp108.sap-ag.de/instguides > sap business suite and applications> SRM 7.0 > Workflow Guide - SAP SRM 7.0 and Configuration guide.
Page 16, Approval Processes in SAP SRM; you will understand possibilities of SRM 7.0 process controlled workflow and then decide which one you need.
Also refer to 7 Appendix B: Approver Determination Strategies in the Standard
This has few example classes/BADI implementation for agent determination which you can refer to.
Regards,
Ashish -
Line Item level Approval for Shopping cart
Hi Expert,
I am using workflow template WS14500015 for line item level approval.i have few doubts on this
i am using cost center based approval, so if the 1st line item is approved will it generate a PO or will it wait for all the line items approval.Hi Mano,
if you use approval. It will be approved by steps. Next step will not be started until previous completely done. In your case 1st Item should wait until all other items processed.
Regards
Konstantin -
AME Line Level Approval -- Oracle Quality
Hi All,
In Oracle Quality module I have create one parent plan and a child plan is associated with it. After multiple lines are entered in the child plan (Approver details is stored as one of the collection result in this plan) and later when the parent plan is saved, line level AME approval based on the approvers in the child plan should initiated. The final e-signature status should be at the header level, such that once all the lines have been approved i.e. parallely approved, the header record status should change to "APPROVED".
I had tried the header level approval approach, but in this case the approval flow for approvers could be done, but the only issue is that it was done serially.
Is there a way to achieve this in AME? Kindly help.
Thanks.Apologies for the late response, have only just spotted the question.
You will need to register "line-item job-level chains of approval" under payables transaction type before you can select it from the picklist:
Setup\Action Types\"Use Existing Action Type" button, then select action type and continue.
Hope this helps (if you haven't already resolved yourself)
James -
Determining second level approver for travel expense claim workflow
Hi Experts...
In Travel Expense claim workflow,we are using two level Approval.The employee has to enter his data for expense claim through ESS..Then expense claim is submitted and sent via workflow to the Travel department. Travel Dept verifies the expenses against the bill and approves the claim by selecting the next level approver and attaching the scanned copies of the bill.
I made copy from the standard workflow WS20000040.
How can i select the next level appover in first level approval step???
Is there any FM or BAPI or BADI???
Please help me ...
Thanks in Advance
Regards,
Hemalatha.Hi Hemalatha,
I have small tricky workaround to find out the second level of approver.The Standard Rule available can reused again by passing manager's Position.i.e
After first level completed , store manager position in container variable and pass it to the same task rule so the task is sent to the manager's approver .
Message me if needed more details.
**Award Points if useful -
Line level dock for ipod classic
In trying to figure out the best way to connect my ipod classic to my small Denon 30w stereo I've been experimenting. I have an old Apple branded dock I found in a drawer from 2004 when I bought my first Ipod, a 20g 2nd generation Ipod, the first one that came with the clickwheel. It has a line level output in the back, and it seems to work fine with the classic, as a matter of fact, with the Ipods volume and the stereos volume at the same levels it is at least 30-40% louder (and clearer) than using the typical headphone jack connection. But the line level plug on this dock is a little fidgety, bump it and one speaker goes out, you have to jiggle and/or twist the cable just so to recover, obvously it's a loosened connection inside the jack...so I go to Best Buy and get an offbrand dock that comes with a remote that was on clearance (it's a clone of Apples universal dock), it has a line level out as well, looks very much the same as the Apple dock. I assumed that a line level dock from any brand would be the same, since its sending a clean unamplified signal to the stereo (isn't it?), however the quality of the audio coming from this dock was about equal or even worse than the headphone jack, I really have to crank the volume on the stereo to get the same sound, and it just doesnt sound as good. I was surprised, I didnt think there was a lot going on in these docks, just routing the ipods signal to the stereo. Am I wrong here? Will springing $60 for Apples universal dock be the best option?
I connected my ipod classic to my maranz av receiver by apple dock. For best sound it is crucial to connect by dock input not audio out (earphones) ! For that i use apple component AV cable.
Maybe you are looking for
-
How do I remove iCloud without losing anything from my MacPro?
I have Lion (hate it) and this pushed me to iCloud. My Address book keeps syncing back to an OLD list which refuses to take corrections, but worse still is that someone else's email address is in MY slot on iCal when I put in email reminders ! I have
-
Satellite L500-19X - no wireless network adapter
Laptop says can only connect to the internet with an ethernet cable (how I'm connected now). After looking online at different forums I have tried everything that's been said, like install the wireless LAN driver, but nothing seems to work. The only
-
Dual boot - (Lion and SL) Wifi in SL none in Lion - very disappointed in Apple
I installed a SSD drive in my 15.4 mid-2009 Macbook Pro to be able to daul boot into either Lion or Snow Leopard. I did this because the first time I tried to upgrade to Lion I had no WiFi hardware but after going to Apple we figured it may have bee
-
I texted my daughter with using some new flesh colored emoji's and she not only got my new "clapping hands" but a tiny alien face also appeared. Has anyone reported this bug to Apple. I don't know how to do it
-
Spring MVC Portlet in Weblogic Portal
Is there any sample application for Spring MVC Portlet(JSR 168) in Weblogic Portal ? If so, where can I download it from ?