Line of copy at top of photo in burned dvd at intervals.

I did a slide show in Iphoto. Added some text slides for birthdays. The I shared to IDVD and after reviewing the settings burned the DVD.
I get the following line at the top of the first slide and it pops up periodically during the slide show on the HD-TV I view on. the line of copy is
(Icon of a piece of film) 1 (music note) 1:LPCM 48khz/16Bit MBPS
How do you remove from the slide show or prevent it from getting on there in the first place?
Thanks

Why is the disc image fine but at least one of the burned DVD's, but not all, from the disc image having audio drift?
As I read what you wrote, you evaluated a disk image and had no problems, then made changes to the project involving the audio track and now have problems.
The 'drift' sure sounds like the 12-bit vs. 16-bit audio problem. See http://docs.info.apple.com/article.html?artnum=300741

Similar Messages

Out of focus photos after burning dvd.

I am using Magic iDVD in iDVD 08. Have created a movie with photos imported from iPhoto. All appears to be well when I preview the movie prior to burning it (i.e. photos are clear and sharp, and burning process appears to go as it should). But when I view the burned DVD all the photos are quite out of focus. This occurs whether I watch the DVD on my iMac or TV. Am using Philips DVD-R discs. Have tried different encoding settings with no difference in results.

It looks to me like the flash fired for the shot, but the camera also kept the shutter open for a fairly long time to reach optimum exposure. Can you check and see how long the exposure was? It appears that the bright, flashed parts of the photo are sharp, so I don't think it's an optical problem. The flash froze some of the image, but handheld camera shake created the blurring. Try a similar shot on a solid tripod. Or reset the exposure so that it's short enough to handhold and try again. I'll often do dusk or nighttime shots on aperture priority setting with a flash to light up someone in the foreground. The shutter stays open long enough to light up the dark, unflashed areas in the background, leading to a long exposure, so I have to use a tripod and have a model that can stay very still. Otherwise the photos end up looking like your shot. As far as saving the photo that you posted--it would take a huge amount of effort by someone that's very good with Photoshop.

Unable to burn cds or view photos on burned dvd on new (feb 2011) MBP.

I have been unsuccessful in burning photo CDs. It goes through the whole process and then at the end tells me that it was unable to complete the burn. I use my old PC to burn the cds because I need the space on my camera. I forgot about this until today when my photographer gave me a burned DVD of the photos she took of my kids. The MBP says I inserted a blank dvd. I went back to her and she pulled them all up on her PC. I am new to Mac and am feeling like I wasted a ton of money because I have to keep going back to the old pc for all the things I wanted to do on a faster, newer computer

had a similar issue about it "not responding properly" and i went back to apple and got a new superdrive put in and have had no problems since.

Quality of photos on burned DVD no where near original files

The quality of the photos in a slideshow I burned to DVD using iDVD 6.0 are NO WHERE near the quality of the un-edited original files. It's so bad I wouldn't even give the DVD to someone.
What gives? I chose "High Quality" encoding in iDVD.
I was expecting the photos to be burned as-is and to be viewable at the full, high level resolution.
Am I missing a setting?
Thanks!

What gives? I chose "High Quality" encoding in iDVD.
Use Best Performance instead. (Provided Playback is under 60 mins.) This will help slightly.
But overall you must keep in mind that DVD's are considered low resoltion devices. Often the still image quality is less than one third of a megapixel. And there's only so much you can do with this until we see Blue Ray Burners widely used on most macs.
Also, in the meantime you may want to check out a few 3rd party apps that specialize in slideshow production:
http://lqgraphics.com/phototomovie.php
http://www.boinx.com/fotomagico/overview/

Thin white horizontal line over top of photo & top of QT clip?

I inserted a JPEG photo on my home page as well as video clips on other pages. Working in iWeb they look fine. After they are published, there is a thin white horizontal line that sits on top of the JPEG photo (from its left margin to its right margin). The same white line shows on the upper top horizontal frame of QT Movie clips that I have inserted on other pages.
It is important to note here that on this website the background color is purposely black on all pages...so the white line is very noticeable (albeit small in width...only about 1-2 points) and I don't want to flip the background color to white to hide it.
Does anyone know how to get around this? Or is it a normal glitch you have to live with black backgrounds?
Otherwise, everything looks and works great...
John

Does it happen only on one kind of page? It has to do with the placeholders used maybe. The picture does not fit the box exactly. You can adjust the measurements of the picture on the vertical maybe one or two pixels. Or you can tell iWeb to re-render the picture by taking the picture down below 100% opaque. Make it 99% in the opacity changer.

Script to split line of copy into 2 frames?

Hello,
I was wondering if anyone has come across a script that could split a line of copy within a text frame into two frames (at a point of the users choosing).
The example below is similar to what I'm using in a catalog as a folio/photo credit. At the end of the design process, I have to go through and split text objects that are in color out from text objects that are b/w (this is so the catalog can be translated into a second language. Color items are on a common layer, each language is in black only and on it's own layer in the document).
Seen anything like that kicking around the internet?

Hi vasu_479,
Based on your description, you want to split columns in source table into two destination tables.
After testing the scenario in my environment, we can use Multicast to achieve your requirement. Just as you said, the Multicast would return all columns. But we can use the method below to achieve the goal:
If the destination tables are existing tables, we can just map column A, B and D as Input Columns to the corresponding Destination Columns in the Mapping tab for destination A. Then map column A, C, D and E in destination B.
If the destination tables are created in the Destination component, we can modify the create table query to directly create A, B and D for destination table A, create A, C, D and E for destination table B. Then there columns would be automatically mapped
in the Mappings pane.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP!

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.

It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
Thanks

HP Officejet Pro 8500 Leaves a black horizontal line while copying

HP Officejet Pro 8500 Leaves a black horizontal line while copying . It can print fine, but whenever we make copies (black, or color) we get a straight horizontal line running across the page. I'ts a perfect line, no streaks, nothing i do can fix it, any ideas?

Are you putting the copies through the auto feeder? If so, you might want to clean the roller and the glass that it would roller over. I also clean the white bar that is on the bottom of the cover.
I have the same issue but it is white line when I am scanning.

How do you copy and paste a photo from the internet without a mouse?

Does anyone know how to copy and paste a photo from the internet without a mouse? I would appreciate a response asap. Thanks.

http://support.apple.com/kb/HT2477
Pointing, clicking, and getting around
When you move your mouse or finger on a trackpad, you control a pointer (also known as a cursor) that moves across your screen. The pointer allows you to select and interact with the various items on your screen, including selecting files, clicking buttons, dragging sliders, and so on. Sometimes the pointer may look like a hand, a crosshair, an I-beam, or another icon, depending on what you're doing and the application you're using.
For example, if you're using Safari to view this webpage and move the pointer across it, notice that it turns into an I-beam when you move it over text or a text field. When you see this, you can usually interact with the text or field below it. When you move the pointer over a button or link, the pointer turns into a hand, letting you know that you can click on the item.
Depending on what you're doing and what application you're using, your pointer (far left) may change appearances
Clicking your mouse button or trackpad button once allows you to select the item that your pointer is on. In other words, if your pointer is on a file's icon, clicking once will select it. If the pointer is on a button or link, clicking once will activate it. If your pointer is on a text field, clicking once highlights the field and allows you to start typing text in it.
If you want to open a file, folder, or application, click your mouse button or trackpad twice. This is known as double-clicking. In general, you'll need to double-click items if you want to open them from a Finder window or the desktop. The exception to this is opening stuff from the Dock—just click once on an icon in the Dock to open it.

1800 Photos on iPhone. Missing Photos During Copying from DCIM or Import Photos to PC only finds 1200. How to copy the other 600 photos from iPhone to PC?

When I go to Settings > About -- I see there are 1800+ photos on my iPhone.
When I try to copy the entire DCIM folder using Windows Explorer, or "Import Photos" when plugging in via USB, it only copies 1200 photos.
I can see the photos on my iPhone, yet its not copying them all. I'd hate to have to manually find and copy 600 photos.
Why am I not able to copy all the 1800 photos to my PC?
Someone please help! thank you!

First, reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Home screen will display again.
Then open iPhoto and click on Preferences>General, and make sure that the option "Connecting Camera Opens" has iPhoto selected. If it does not, select iPhoto.
Then try hooking up your device again. It should launch iPhoto automatically at that point and start the import.
Post back if that doesn't work.
Cheers,
GB

How do you copy a picture in photos?

How do you copy a picture in photos? When I right click on them it doesn't give you the option to copy and when I click edit, copy, it does nothing.

I've copied pictures from iPhoto before and its worked perfectly fine. Just can't seem to find a way to do so on Photos.
I my Photos version it works to select a photo and then use the "Edit" menu.
Edit > Copy ⌘C or pressing the key combination ⌘C
There is no visible confirmation, but the photo will be in the Clipboard.
I cannot test this with Word. But I can insert the copied photo from the clipboard into Pages or Keynote documents by using ⌘V

How do I copy captions with the photos into a photobook?

How can I copy captions with the photos into a photobook. The photos are in Adobe Elements 6.

Good day!
The photos are in Adobe Elements 6.
Then you really should not be posting in the Photoshop for Beginners Forum, I guess, but in the Forum dedicated to that piece of software.
http://forums.adobe.com/community/photoshop_elements
Regards,
Pfaffenbichler

PO line item copy to new PO doc.

Hi , one question PO line item copy to new PO doc.
if i made on PO docuemnt as bleow
10 Item1    20unit
20 Item2    10 unit
30   Intem3   20 Uni
and when I need to create new PO , if i wanna creat PO inclue only line time 10 ,20
how can i do it? could you pls kinldy adivse?
just copy POC totlay to new PO is very easy.. I already know that..

Hello.
thanks so much for your answer.
I tried to create new PO as you told, but I failed again.
I could copy only one item into new PO document   ( there are serveral item (material item , comsumer itme , )
but only material item copied to new PO (select item and adopt)
Could you pls kindly adivse?
I would like to copy several items from the old PO document and pastes those items on one new PO document
Step 1 - Type ME21N - Create Purchase order
Step 2 - Select PO document type, Vendor & PO date.
=================================================== ( by step 2 , this is just create new PO===
Step 3 - Click Document Overview button and open new window menu in PO screen left side
(Do you mean just clike Document overview? in the left screen? )
Answer : Yes, click on the Document Overview ON button and then open left side one small window.
Step 4 - Click Selection Variant button in the left side window menu and then select Purchase Order option.
(do you mean just select "my purchase order" button i the selection options?)
Answer : No, click on the 'Purchase Order' first option.
Step 5 - Now next screen open and give OLD Purchase Order document number in Purchasing Document ______ input field &
other input data filed is empty.
( I dont understand exactly what you mean, what's next screen? do mean open new session? or
just select old PO document via document overview window in the left side? )
Answer : Yes, after click 'Purchase Order' first option, it will open new session screen and on the screen input option is 'Purchasing Document ___________ . Here, you will give copy of the old PO number remaining input options data are empty.
Step 6 - Now Execute the screen and shown old PO number 3 times shown (10,20,30)
(What exactly do you mean? do you mean just click old PO number shown on the document overview? )
Answer : Yes, after execute the old PO number shown on the document overview screen.
( we can do if there is still PO number in the left pane , just clicking po number )
Step 7 - In the OLD PO first 2 line items are to be create new PO, Select 1st line using mouse and then adopt button click
(Selection variant next button), 2nd line select & adopted to new purchase order line item from old PO line item 10 & 20 copied.
(I wonder this answer , I followed as your instuction same way.. select itme 10 and adopt , and select item 20 and adopt
and in the new PO document just click adopt , in that case, only one item copied..
Could you pls make clear it? )
Step 8 - Click Document overview button, the left side window menu closed.
Step 9 - Adopted 2 line item rate, qty and tax details to be provide and then SAVE as new Purchase Order.
Hello, my answer provided for you question. Now, you are clear and resolved of old PO to new PO for the particular line items.
Regards,
K.Rajendran
Edited by: SAP toddler on May 14, 2011 9:50 AM

How do I copy a screen into photos or pages ?

How do I copy a screen into photos or pages ?

You can take a screenshot by briefly pressing both the home and sleep buttons - the screen should seem to flash and the screenshot should go into the Camera Roll album in the Photos app. Is that what you want to do ?

Line of copy at top of photo in burned dvd at intervals.

Similar Messages

Maybe you are looking for