Line of pixels and other LCD issues

I've had this iBook for almost a year (one year this Christmas) and it's screen already looks and feels like junk. Right after I got it, a nick formed it the bottom left-hand corner. It still works right there, just a nick in the plastic. Next, the plastic chipped in the upper right-hand corner, and there was a hairline crack above the latch. Now, there's a line of green pixels, right down the right-hand side of the LCD. I know this was a common problem on Tibooks. This iBook has seen NO abuse, heavy use, unwarranted openings, ect, yet it still suffers from these problems. The hard disk has been wiped and reformatted by Apple, even though it failed. If I get one more problem, I'm calling Apple, even though I should call and complain now. My old Toshiba Notebook suffered from a LCD failure, but at two years after its purchase. If this thing goes to Apple one more time, my parents are going to kill me, since I'm the one that recommended them to buy me an expensive iBook rather than a cheap Dell.
What I'm asking is, What should I do? I have a not-even 1-Y.O iBook that's dying. I don't want to switch back to PCs, but my parents might force me. I want my next Mac to be a desktop, preferrably a Used Powermac G4, but I might get a cheap Dell.
Thank you,
Ian A.

Weird, it's gone now! When I tilt the screen all the way, it slowly appears light, than fades. I have a feeling this will be a cable or a wire, and that Applecare probably won't cover it. Anybody have a similar expierience, and did Apple fix it, under warranty? I have no money to spare on a new computer right now, or to have one fixed. I'm also afraid Apple will make me pay for it, even though like I said, this iBook has seen NO abuse, drop, ect...
Ian

Similar Messages

  • S4LEAGUE AND OTHER GAMES ISSUE - INTERFERENCE WITH...

    Infinity is fine for other stuff except certain web games e.g.
    S4LEAGUE AND OTHER GAMES ISSUE - INTERFERENCE WITH SERVERS
    Issues
    Random disconnects
    slow connection
    slow client server
    Google searches suggest it might be a BT issue.
    Can you help, thanks

    using wired or wireless connection?
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • PSE 11 editor has stopped importing from scanner, no longer permits drag and drop, will not permit cropping, and other bizarre issues

    Windows 8.1, PSE 11
    I am having a number of issues including loss of import functionality from scanner, I can't drag and drop photos into the editor any more as well, or at least not after the first one. The crop function stops working after the first couple of photos.  Then some freezing.  A little added crashing.  A plethora of other bizarre issues as well.  This just stated happening a couple of days ago. 
    What I have tried:
    Uninstall/Install. 
    Deleted preferences both before opening Editor (crontrol-alt-delete) and after opening it. 
    Kindly advise.  Thanks!
    Adobe Photoshop Elements Version: 11.0 (11.0 (20120830.r.32025)) x32
    Operating System: Windows 8 64-bit
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 8
    Processor speed: 3500 MHz
    Built-in memory: 8139 MB
    Free memory: 5185 MB
    Memory available to Photoshop Elements: 3255 MB
    Memory used by Photoshop Elements: 70 %
    Image tile size: 128K
    Image cache levels: 6
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1440, right: 2560
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 660 Ti
    Driver Version: 9.18.13.3750
    Driver Date: 20140327000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 2560 x 1440 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 660 Ti
    Video Card Memory: -2047 MB
    Application folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\
    Temporary file path: C:\Users\evan\AppData\Local\Temp\
    Photoshop Elements scratch has async I/O enabled
    Scratch volume(s):
      Startup, 931.2G, 805.4G free
    Required Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Required\
    Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins\
    Additional Plug-ins folder: not set
    Installed components:
       ACE.dll   ACE 2011/03/29-16:11:44   63.457850   63.457850
       adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
       AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/20-18:39:56   4.1.9   78.509892
       AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
       AdobePDFL.dll   PDFL 2011/03/29-16:11:44   63.378681   63.378681
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2010/10/12-08:45:30   63.139439   63.139439
       AdobeXMPFiles.dll   Adobe XMP Files   5.0   61.134777
       adobe_caps.dll   Adobe CAPS   4,0,42,0  
       Adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.2.0.4 (BuildVersion: 2.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       AGM.dll   AGM 2011/03/29-16:11:44   63.457850   63.457850
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   1.486530
       aif_ogl.dll   AIF   3.0   1.486530
       amtlib.dll   AMTLib   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       amtservices.dll   AMTServices   4.2.0.4 (BuildVersion: 4.2; BuildDate: Wed Apr 27 2011 21:49:00)   1.000000
       ARE.dll   ARE 2011/03/29-16:11:44   63.457850   63.457850
       asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1  
       AXE8SharedExpat.dll   AXE8SharedExpat   3.3   49.279053
       AXEDOMCore.dll   AXEDOMCore   3.3   49.279053
       AXSLE.dll   AXSLE   3.3   49.279053
       Bib.dll   BIB 2011/03/29-16:11:44   63.457850   63.457850
       BIBUtils.dll   BIBUtils 2011/03/29-16:11:44   63.457850   63.457850
       boost_threads.dll   DVA Product   5.0.0  
       cg.dll   NVIDIA Cg Runtime   2.0.0015  
       cgGL.dll   NVIDIA Cg Runtime   2.0.0015  
       CoolType.dll   CoolType 2011/03/29-16:11:44   63.457850   63.457850
       data_flow.dll   AIF   3.0   1.486530
       dvaadameve.dll   DVA Product   5.0.0  
       dvacore.dll   DVA Product   5.0.0  
       dvaui.dll   DVA Product   5.0.0  
       ems.dll   Elements Organizer   11.0  
       ExtendScript.dll   ExtendScript 2010/03/05-08:21:15   61.423205   61.423205
       FaceDetector.dll   FaceDetector 0000/00/00-00:00:00   2.0.1.1   2.0.1.1
       FileInfo.dll   Adobe XMP FileInfo   5.0   61.134777
       filter_graph.dll   AIF   3.0   1.486530
       hydra_filters.dll   AIF   3.0   1.486530
       icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896  
       image_compiler.dll   AIF   3.0   1.486530
       image_flow.dll   AIF   3.0   1.486530
       image_runtime.dll   AIF   3.0   1.486530
       JP2KLib.dll   JP2KLib 2011/03/29-16:11:44   63.196876   63.196876
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       MPS.dll   MPS 2011/05/24-09:45:42   63.464027   63.464027
       MSVCP100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1  
       MSVCP71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
       MSVCR100.dll   Microsoft® Visual Studio® 2010   10.00.30319.1  
       MSVCR71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop Elements Editor   11.0  
       platform.DLL   Adobe Help System   1, 0, 0, 1  
       Plugin.dll   Adobe Photoshop Elements Editor   11.0  
       PSArt.dll   Adobe Photoshop Elements Editor   11.0  
       PSViews.dll   Adobe Photoshop Elements Editor   11.0  
       ScCore.dll   ScCore 2010/03/05-08:21:15   61.423205   61.423205
       shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
       Tbb.dll   Intel(R) Threading Building Blocks for Windows   2, 2, 2009, 1011  
       updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
       WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
    Required plug-ins:
       Accented Edges 12.0
       ADM 3.11x01
       Angled Strokes 12.0
       Auto Divide 11.0.0.0 (11.0 (20120830.r.32025))
       Average 12.0.2
       Bas Relief 12.0
       BMP 12.0.2
       Camera Raw 7.4
       Chalk & Charcoal 12.0
       Charcoal 12.0
       Chrome 12.0
       Clouds 12.0.2
       Color Halftone 12.0.2
       Color Variations 12.0.4 (12.0.4x001)
       Colored Pencil 12.0
       Comic NO VERSION
       CompuServe GIF 12.0.2
       Conté Crayon 12.0
       Correct Camera Distortion 12.0.2
       Craquelure 12.0
       Crop and Straighten Photos Filter 12.0.2
       Crosshatch 12.0
       Crystallize 12.0.2
       Cutout 12.0
       Dark Strokes 12.0
       Difference Clouds 12.0.2
       Diffuse Glow 12.0
       Displace 12.0.2
       Dry Brush 12.0
       Extrude 12.0.2
       FastCore Routines 12.0.4 (12.0.4x001)
       Fibers 12.0.2
       Film Grain 12.0
       Filter Gallery 12.0
       Fresco 12.0
       Glass 12.0
       Glowing Edges 12.0
       Grain 12.0
       Graphic Novel NO VERSION
       Graphic Pen 12.0
       Halftone Pattern 12.0
       Ink Outlines 12.0
       Lens Blur 12.0
       Lens Flare 12.0.2
       Lighting Effects 12.0.4 (12.0.4x001)
       Liquify 12.0.1
       Matlab Operation 12.0.4 (12.0.4x001)
       Mezzotint 12.0.2
       MMXCore Routines 12.0.4 (12.0.4x001)
       Mosaic Tiles 12.0
       Multiprocessor Support 12.0.4 (12.0.4x001)
       Neon Glow 12.0
       Note Paper 12.0
       Ocean Ripple 12.0
       OnEdge 1, 0, 0, 1
       Paint Daubs 12.0
       Palette Knife 12.0
       Patchwork 12.0
       Pen and Ink NO VERSION
       Photocopy 12.0
       Picture Package Filter 12.0.4 (12.0.4x001)
       Pinch 12.0.2
       Pixar 12.0.4 (12.0.4x001)
       Plaster 12.0
       Plastic Wrap 12.0
       PNG 12.0.2
       Pointillize 12.0.2
       Polar Coordinates 12.0.2
       Polar Coordinates 12.0.4 (12.0.4x001)
       Poster Edges 12.0
       Radial Blur 12.0.2
       Read Watermark 4.0
       Reticulation 12.0
       Ripple 12.0.2
       Rough Pastels 12.0
       Save for Web & Devices 12.0
       ScriptingSupport 12.0.4
       Shear 12.0.2
       Smart Blur 12.0.2
       Smudge Stick 12.0
       Solarize 12.0.2
       Spatter 12.0
       Spherize 12.0.2
       Sponge 12.0
       Sprayed Strokes 12.0
       Stained Glass 12.0
       Stamp 12.0
       Straighten and Crop Image 12.0.4 (12.0.4x001)
       Straighten Image 12.0.4 (12.0.4x001)
       Sumi-e 12.0
       Texture Fill 12.0.4 (12.0.4x001)
       TextureSelect 12.0.4 (12.0.4x001)
       Texturizer 12.0
       Tiles 12.0.2
       Torn Edges 12.0
       Twirl 12.0.2
       Underpainting 12.0
       Water Paper 12.0
       Watercolor 12.0
       Wave 12.0.2
       WIA Support 12.0.4 (12.0.4x001)
       Wind 12.0.2
       ZigZag 12.0.2
    Optional and third party plug-ins:
       Frame From Video 6.0
       Magic Extractor 12.0.4 (12.0.4x001)
       PhotomergeUI 12.0.4 (12.0.4x001)
    Plug-ins that failed to load: NONE
    Installed TWAIN devices: NONE

    Final Update: ...god willing...
    OK! Check it, like I said in previous posts I seemed to have narrowed it down to specific mp3s not converting and playing in their native sample rate which if paired with another sample would give you the "audio midi sync" error and basically screw up your clock! It appears mp3 files converting to mp3 using iTunes would not convert to the correct sample rate if set to something other than 44 in logic and cause this. A tad peculiar Apple iTunes won't work with Apple Logic. I was able to confirm this on two mac's via my friend in Florida. He's running Tiger and tried the same experiment and Booya! Mickey Mouse! It appears this insane week long adventure has came to an end (...god willing) with a super specific unlucky shot in the dark on my part finally revealed to be an perfectly normal function of Logic (obviously one i'm not fond of..) As far as the errors / crashes / system overloads / kernal panics I think I can sort those out to the mackie onyx satellite not being a good choice and trying to add and remove firewire devices in the middle of the sample rate mayhem. Wow! all I can say is, I'm glad it's over
    Wish me a lot of luck in the future.. I'm sure i'll need it!

  • N8 poor signal reception and other hardware issues...

    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.

    sats_24 wrote:
    I have always been a Nokia fan . I started with Nokia 6600, then N70, then N82 and now a Nokia N8.
    However, I am facing the worst experience with N8 reception issues.
    The problems faced are as under :
    1) Poor Signal Reception Issues - Signal strength is weak and is constantly fluctuating compared to other Nokia Phones. At my workplace, if Nokia N82 displays 5 bars, N8 would display only 1 or 2 bars.
    2) Phone freezes many times. Whenever an Alarm is enabled, phone freezed much more.
    3) Purple Tint in the display. Nokia Service Centre says that its normal but according to me, they are just ignoring this issue. 
    4) Vibration is weak : I often do not realize when the phone is vibrating in my pocket !! 
    Upcoming Symbian Anna will just improve the user interface but will not be able to solve these hardware issues.
    If Nokia plans a hardware update facility for N8 users wherein they can fix the signal reception issues and increase the RAM to 1 GB atleast, I would retain this phone for few years.  
    But, now, I intend to switch to Samsung Galaxy S II. 
    Your views solicited.
    Regards
    MODERATOR'S NOTE: This post has been edited as we do not allow the discussion of speculations concerning products or services which have not been officially announced by Nokia.
    I am agree with poor signal issue with nokia N8. I have two cell with one is N8 and other one is N26 with nearly 4.5 year old but at same place Nokia N8 showing very poor quality of network signal compared to N26. So for same network provider with two different cell with same manufacture how can drastic different that is also investing nearly RS.22000!
    Please resolve the issue ASAP.
    Regards,
    Praful

  • Slow finder indexing, and other Mavericks issue

    Since downloading Mavericks i have two issues that have started to become annoying..
    When i open a finder window, or when trying to save something, the indexing takes ages. Was always instant in mountain lion..
    Also now if i right click an image for example that is an attatchment in mail it brings up the "open with" option but when i hover on it i just get "preview, colorsync and other"
    I used to get a list and always had the option of adobe photoshop cs6 ... i now have to click on other everyu time and search through my applications to find cs6. Is there no way of getting it back to a list of options?
    I am on an 21 inch iMac. 2.66 core 2 duo with 8 gb 1067 ddr3 memory... mid 2009 iMac if it makes any odds.

    @shashinka ;  I'm sorry I did not tell it before but I have maxed out memory RAM on my MacBook (I got 8 GB in total) well before Mavericsk and I also find that is not a memory related problem. Do not be sad and considers that having more memory is almost always a good thing in general (and that you can resell it too).
    Another thing i do not mention: I have the same problem on my other Mac ( iMac (21.5-inch Late 2009) ) that had maxed memory too ( 16GB there).
    The point is this "systemstas" hog process.
    Now I read 6 "I have this question too" : someone else want to add an articulated response ?
    I am a little surprised that I did not even have found a single person who does not agree with my post (or even just with my polemical tone). I begin to suspect that here, in the house of the Big Apple, no one is interested in listening to real stories about "customer dissatisfaction", that's simple something that "cant be".

  • Recently I have not been able to post comments and other related issues.

    On some websites like Reddit.com I am usually no longer able to post in comment boxes. I can type my comment in the box, but hitting save clears the box and no comment is posted (oddly, i noticed that the comment ends up at the end of the url).
    Or use the cursor to click on up and down vote arrows. When I mouse over the arrow, it changes to a hand with pointed finger, but clicking the link does nothing.
    Or post photos.
    Normally I use Firefox 29.0.1 (which I have been using a long time and do not want to change). But the problems I mention here apply to both browsers, depending... on other things I cannot control or figure out. But at the moment, I can use links for comments etc. on IE8 (cannot update), but not on FF.
    I've asked Reddit help but so far nobody has replied (r/bugs and r/help).

    Sounds that you are blocking JavaScript.
    Do you have security software that might be blocking JavaScript?
    Just to be sure: Java and JavaScript are different languages.
    To avoid confusion, see:
    *http://kb.mozillazine.org/JavaScript_is_not_Java
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
    *http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • My MBP 2011 w Lion freezes after sleep with blue screen and other sleep issues

    My MBP v2 of 2011 line with Lion on it freezes occassionally (maybe 1 out of 10 awakenings from sleep) where the screen is blue and only way to make it stop is to hold the power button and restart.
    Another issue I have is I'll come out of sleep, and the wallpaper on my screen disappears, and I just see a gray background.  If I go to Monitor preferences, it claims the wallpaper is set to my normal background.  Restarting has the background display again.
    Note: I often use a external monitor, so good chance these freezing issues happen when I unplug/plug in the external monitor (via DVI cable to DisplayPort converter to MBP)
    Today I had a slightly different experience with the freezing.  It had my second monitor have a bunch of pixelated garbage and a message about holding power button down and restarting.  I restarted, and got a "your system has crashed unexpectedly" like message, so I told it to send the data to Apple.

    I used to have that problem as well, try going to system preferences and having the computer require a password after waking, worked for me.

  • "screen shot can't be saved" and other permissions issues

    After having my iMac at the Apple Store for four days solving a problem with "quit unexpectedly" issues with all Apple built-in Apps on OS X Yosemite, I got the machine back with those problems solved.  It involved re-installing OS X and restore files from backup.  I thought all was well; the Genius Bar dude showed me that it's fixed. He said it took so long because of bizarre permissions issues he'd never seen before.
    Now that I've lugged this 40lb machine back home (after verifying the fixes in the store) I now find that several (other) functions don't work.  When I try to do a screenshot, I get this message:"Your screen shot can't be saved.  You don't have permission to save this file in the location where screen shots are stored."  Message could have been more helpful; the "location" is the desktop.  Pretty descriptive, though.  Seems I can't save anything to the desktop.
    I tried creatng a folder on the desktop.  Got this message: "Finder wants to make changes. Type your password to allow this".  Type password and new folder appears.  Drag the new folder to the trash, get same message..
    I tried copying a file from a network drive to the desktop. I get this dialog: "Modifying Desktop requires and administrator name and password.  I clicked "authenticate" and after a 3 minute delay (with "Preparing.." ) I get this dialog; "Finder wants to make changes.  Type your password to allow this".  I type the password and the file appeared on the desktop.  Before the work at the Apple Store, this never happened.  BTW I have only one user account and it's marked "Allow user to administer this computer".  Thinking something might be goofy with the pw, I changed it (took 3 minutes to do, oddly) and rebooted. No joy. Same thing happens when I try to drag something from the desktop to the trash.  Long time "moving" message followed by having to provide and admin pw.
    I tried to save a Safari attachment to the Downloads folder and got this message: "Safari could not download the file xxxxx because there is not enough free disk space".  Since I have more than 600GB of available space, I think the message is wrong and that it's really a permission issue with the Downloads folder.
    Tried to reset the password again.  Click to unlock the Users & Groups panel, get "System Preferences is trying to unlock Users & Groups preferences.  Type your password to allow this".
    All this tells me that somehow Yosemite is in "nag" mode (reminiscent of Windows Vista.
    Any ideas?
    Chaz

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • Stuck pinwheel/beachball and other coinciding issues

    I've recently run into a major problem on my 2006 Macbook Pro.  Soon upon booting to the desktop in Snow Leopard, the mouse icon changes to the spinning pinwheel/beachball as if waiting on a process to complete.  I can open programs from the task panel, such as Office or the calendar, but the pointer icon remains stuck as a pinwheel.  I am unable to open any drop-down menus from the top such as Finder, and can't get Force Quit to open.  Additionally, the Snow Leopard partition of the computer seems to be unable to establish an internet connection.  There is a list of the usual networks detected, however trying to connect under each one yields a "little or no connectivity" alert.  Oddly though the other partition on my computer (Windows 7) has no issues with connecting, as I typed this question out using the same computer under Windows.  Finally, I cannot get the computer to shut down in Snow Leopard, neither by going to Finder nor by tapping the power button, and I have to hold down the power button to do so.

    If you want to replace your battery you can get one fairly cheap on eBay http://www.ebay.com/sch/i.html?_nkw=aluminum+macbook++battery+A1280&_sacat=0&_od kw=aluminum+macbook++battery+A1278&_sop=12&_osacat=0
    Or for $129 from Apple http://store.apple.com/us/product/MB771LL/A/rechargeable-battery-13-inch-macbook -aluminum
    MacBook (13-inch, Aluminum, Late 2008)
    Removing the battery:
    Shut down the computer. Disconnect any cords connected to the computer.
    Turn the computer over.
    Locate the access door latch.
    Push down to release the latch, this sets it in the open position, and remove the access door that covers the battery.    
    With the latch still in its open position, gently pull up on the battery tab to remove the battery.
    Note: The latch must be in its released, open position to remove or replace the battery and access door.
    Installing the battery:
    To replace the battery, make sure the latch is in its open position.
    Hold the battery at an angle and slide the lipped edge of the battery below the brackets on the outside edge of the battery bay. Gently press the battery down.
    To replace the access door:
    Line the access door up with the bottom case and the tabs in the battery bay.
    Lower the access door into place.
    Make sure it is level with the bottom case of your MacBook.
    Press the latch into place, so it is in the closed position.

  • OJSP classpath problems and other OJSP issues

    Hi,
    We are running into a number of OJSP problems. The technology stack we are using is :
    Apache 1.3.12
    Jserv 2.0
    Jswdk 1.0.1
    OJSP 1.0.0.6
    The issues we have are:
    1) The OJSP classpaths mechanism as described in the documentation does not work. In our configuration, globals.jsa resides under apache/htdocs. The WEB-INF directory also sits under apache/htdocs.
    It seems that OJSP completely ignores WEB-INF/lib. Any jars that the JSP may need have to be put on the servlet classpath (wrapper.classpath).
    OJSP will pick up modified beans from
    WEB-INF/classes but only for beans that
    use JDBC with thick drivers or for beans
    that don't use the JDBC driver at all.
    2) We got our application to work by moving everything that the JSPs may need to the servlet classpath. However, OJSP would hang when switching between various JSPs. Stopping apache in this case also caused the port to be held by some runaway process. We then had to start apache on a different port.
    So our questions are:
    1) Is OJSP going to support thin JDBC drivers?
    2) Are there other ways of getting bean reloading to work? Bouncing the server, everytime a bean changes is not a viable option for us.
    3) Are there any known issues with OJSP hanging when navigating from page to page?
    Thanks,
    Munazza

    Originally Posted by zdenca
    Hi, we got 2 node cluster Netware6.5SP8 or (OES) we lost the sbd partition and could not mount or start clustered volumes and could not recreate the sbd partition.
    So I have created a new cluster and was able to create sbd partition and mount the clustered partitions manually.
    But not we see 2 cluster objects in C1 the old one is complaining with the NDS sync for the GroupWise pool and master ip resource says new node under location.
    The new cluster objects see the servers properly but no cluster volumes and I cannot create any.
    Nssmu under both servers sees the clustered volumes properly. Check volume objects and trustees under Dsrepair sees only sys.
    So how do I make everything work under the new cluster?
    Help would be greatly appreciated.
    Thanks M.
    Well could not find the cluster forum :(
    Anyhow this is the fix: Deleted all old cluster objects from C1 recreated e-dir objects for clustered pools with nssmu which published the correct clustered info in C1, and allowed me to create new cluster volumes in C1, under the new cluster.
    But took me much longer than type these 3 lines:)
    Cheers.
    M.

  • X-Fi XtremeMusic MIDI recording issues and other SoundFont issues

    I am attempting to record output from the MIDI synthesis through "What U Hear", but seem to be getting periodic pops. This is while recording at 24/48 - the problem is much worse at 24/96; I get a constant scratchy noise or silence until I stop recording. Note that I am in "Audio creation mode" at this stage.
    Additionally, I have found that while having 3rd party SoundFonts loaded and playing a MIDI file, I experience the following issues - missing notes and percussion and notes playing with with the wrong pitch.
    Is anybody else experiencing these issues? I am using the latest 1187 drivers.
    Cheers

    DSM wrote:
    I am having issues with the balance of the input signal from my turntable to my Elite Pro. The turntable in connected to Aux 2 with the switch on the console in the phono position. The signal from my turntable (B&O RX2) is slightly off balance with the left channel signal slightly higher than the right channel. I have attempted to use the Master Auxiliary Balance control in audio creation mode to balance the signal during recording. Unfortunatly I have not been able to make it work as adjusting the balance control has no impact on the recorded signal. I have worked with Creative and to date they have not provided a working solution. I have moved my card from one slot to another, uninstalled and reinstalled the software on numerous occasions and taken every step suggested by Creative. I have an ASUS A8N SLI Premium motherborad. Creative thinks the board may be the issue. Does anyone have any suggestions?
    - old cardridge/stylus being worned out,
    - weak connectors/connections,
    - too light stylus pressure (try 2-3 grams),
    - dirty/dusty stylus,
    - mispositioned stylus (not straight, wrong 'arm'length (if adjustable),
    - wrong connection imbedance,
    You can also try if connecting turntable through amplifier (w/ RIAA) to X-Fi Line-In makes any difference --> shows out, if the RIAA pre in X-Fi is not working properly.
    jutapaMessage Edited by jutapa on 09-05-2006 0:30 AM

  • Palm Pre - Email and Other Bugs/Issues For Future Updates

    Great phone overall, and glad to see there is a support community.  Couple things I noticed that I wondered if other users know of fixes to: 
    - All emails lose line breaks, in that all previous replies are smooshed into one long run on sentence including title block
    - Email notifications don't disappear when action is taken on PC
    - Be able to delete emails and contacts from the phone without deleting from PC
    Other issues not e-mail related, but not sure which forum to post under: 
    - Cut and paste shortcuts with launcher button don't work (which is why I had to retype all this)
    - Cut and paste doesn't work on text you didn't type such as web content
    - Add URL entry box to browser menu, or a button for it directly on screen (similar to back button)
    - Alarm clock set for weekdays doesn't shut off on weekend
    - Snooze and dismiss buttons should be moved further apart
    - Alarm clock made part of online backup (late for work the next day when I exchanged my phone)
    And most importantly:
    - Use cattle prod to get Adobe to release FREE Flash plugin app for browser and make sure to beat Apple to it!
    Post relates to: Pre p100eww (Sprint)
    Message Edited by kx250ryder on 06-16-2009 09:01 AM

    #1 should be to fix the "Next Sync in 0 Minutes" bug with the email. I have the issue and tried everything under the sun so far to fix it. I'll be calling palm tomorrow to see what they can do, however in my research I have found dozens of people posting this issue online, and there are only temporary fixes that work for one sync.

  • Horizontal lines, slow boot and other problems...

    Lately our iMac has developed a few issues. For starters there seems to be horizontal lines that appear randomly on the desktop, in programs like safari, firefox and just about any other programs. They seem to be completely random and actually seem to happen more under my user name than my wife's. I've also noticed that booting up takes a heck of alot more time than it used to. I can even boot up my aging PC faster than this. Also the overall performance seems sluggish. I've also noticed that the screen dims all the time. I could be watching a 3min movie on youtube and have the screen dim. We've never changed any settings and I can't see any reason behind this.
    I've verified and repaired file permissions, but don't know where else to go from there. I'm much more used to fixing PC's than dealing with a Mac. Speaking of which....
    Even though there are quite a few things I like about the iMac (we've had this one for about 2yrs now), I'm really beginning to doubt that they are worth the higher price tag. So far we've had both the mouse and keyboard just stop working (using a cheapo Logitech combo right now), can't stand that multiple users can't access the same pictures from iPhoto, and now these current problems. I guess my question is if this is normal for a Mac. I've always had problems with Windows, but they are easily fixed and never the hardware problems like I'm having with the Mac. We plan to get a notebook soon, but I'm wary of buying another mac.

    Welcome to Apple Discussions!
    For starters there seems to be horizontal lines that appear randomly on the desktop, in programs like safari, firefox and just about any other programs.
    This is the sign of a lemon, so no, it is not normal of a Mac to do this. Run the hardware test that came with the Mac on its installer discs. If it detects nothing, point out the issue to an authorized service center.
    The chances of it happening to a Mac are less, but by no means is it nil. That's what the warranty is for, if you keep good care of your machine.

  • How do I get Apple to stand behind their warranty and replace my defective computer? The hard drive has been replaced twice, the track pad once, and other hardware issues. Can anyone help me so I can get Apple to replace my defective

    My computer has been a lemon. They refuse to properly diagnose, fix, and document my complaints regarding the multiple failures I have had with this computer. Also, I was told that upon my logic board being replaced back in April or May that the topic of replacing the computer altogether with one of equal equipment would be appropriate. Insofar, I have been to the store at least three times in the past month to discuss my issues with the computer that were not resolved when the hard drive was replaced in May. I was also told that the repairs on my system would be good for up to 90 days after the repair work was done and that I could buy AppleCare at the end of the 90 days in lieu of insuring a product that still had defects. I have been on the phone for what feels like hours with Apple trying to work this issue out but they are not wanting to stand behind their product nor are they willing to stand behind their warranty. The warranty expressly states that a computer can be replaced entirely if the defect is considered hardware malfunction and at the representative’s discretion. Every time I brought it in for repair it was due to hardware malfunction; however, they also said once that it was an accessory that I bought that was causing the problem which ended up not being the case after all. This is totally unacceptable. I also asked Mark from AppleCare to let me know what was repaired the second time the computer was put through a diagnostic at the Apple Store. Beachballs, Gears, excessive heat, not being taken seriously at the Apple Store, being insulted by a Mac Genius at the Apple Store, being misinformed by a Mac Genius, dealing with a misinformed Mac Genius. They replaced my iPod touch without much ado.  I was also accused by an Apple Genius of being "hyperbolic." He said this in response to my complaint of the computer melting--literally--items on my computer desk. I am either wanting a refund of my money or a replacement of my laptop. Also, I have lost an incredible amount of data on my computer due to the hard drive being replaced x 2. Not acceptable. Also, the Apple store is 1 hour from where I live. I am currently looking for employment and additionally have a legal case pending where I am the plaintiff. I have lost VERY important documents in both matters which has caused an extreme amount of stress. I do not need the added stress of an unreliable and unsafe computer. I also have been waiting for a call back from Kelly (left two voice messages with Kelly) and Mark (wrote an e-mail for which he has not responded to insofar) at Apple but have heard nothing from either one of them regarding the status of my computer. The only thing I received which was automated by the Apple Store was a confirmation that my computer was ready. I have requested documentation of what was done (basically, I am asking for the receipt) before I drive an hour to pick it up. Haven't heard anything. I brought this computer in on July 24, 2011. We are now upon August 2nd. When do I get to know what was even done on my computer? Do they really think that I am going to take back a computer into my possession only to have to bring it back shortly thereafter to address one of the many issues causing it to malfunction in the first place? I have owned 5 computers  since 1988. All of them PCs. This is my first Mac. Will it be my last?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • Dual display color and other related issues...

    I have posted this on painter forums, though some of the issues coming together here are directly related to issues w/ Snow Leopard and dual displays. Thought I would try here....
    This is so bizarre. When I ever I run P11(I think this is going on in P10 too?) w/ the OS X (snow leopard, 10.6.2 on quad core Intel Xeon Mac Pro, 10 GB of RAM) menu bar on my Eizo(making it the main display), and the Apple Cinema display left as the #2 monitor, I get very annoying brush cursor artifcats left randomly on the Eizo screen after strokes. One cannot predict when the cursor will leave it's gray "marks", but it will do it, sometimes 5 strokes in a row, sometimes after 15 strokes or so? If I move my brush back over them, or change the image percantage view, they vanish, obviously new ones coming back, as I work.
    However I put the OS menu bar on the AC display, yet work back on the Eizo, this does NOT happen. No cursor artifacts. Well, at least I can summon the issue
    The reason I am doing this is Snow Leopard has bad color issues w/ dual displays (well documented, much to Photoshop CS4 users frustrations, and mine). Apple needs to fix it... but for me to see the right color on the Eizo(this is my main color and superior display), it needs to be the main monitor(menu bar) in 10.6.2.
    So, you can see my trap - Accurate color, or annoying cursor artifacts left on the screen (sorry, it really bugs me as I work) as I work in Painter.
    Attempted fixes: Trashed all of Painter's prefs, all of Wacom's Intuos 4(latest driver) prefs and software, switched plug ins on the back of the mac for the displays(lots of restarts), ran cache cleaning Cocktail and DiskWarrior, etc. -- no change, as I can duplicate the issue w/ the above set up. A sidebar or maybe be very related note: I have an iMac w/ max amount of ram (model not very old -- maybe 1 or 2 old) and I have had a long standing issue working on the iMacs we have had w/ this brush cursor artifact problem (in Leopard and Snow Leopard). I am on one monitor w/ the iMac, so you know here the menu bar is...hmmmmmmmm.....?
    Thanks!, T

    I have posted this on painter forums, though some of the issues coming together here are directly related to issues w/ Snow Leopard and dual displays. Thought I would try here....
    This is so bizarre. When I ever I run P11(I think this is going on in P10 too?) w/ the OS X (snow leopard, 10.6.2 on quad core Intel Xeon Mac Pro, 10 GB of RAM) menu bar on my Eizo(making it the main display), and the Apple Cinema display left as the #2 monitor, I get very annoying brush cursor artifcats left randomly on the Eizo screen after strokes. One cannot predict when the cursor will leave it's gray "marks", but it will do it, sometimes 5 strokes in a row, sometimes after 15 strokes or so? If I move my brush back over them, or change the image percantage view, they vanish, obviously new ones coming back, as I work.
    However I put the OS menu bar on the AC display, yet work back on the Eizo, this does NOT happen. No cursor artifacts. Well, at least I can summon the issue
    The reason I am doing this is Snow Leopard has bad color issues w/ dual displays (well documented, much to Photoshop CS4 users frustrations, and mine). Apple needs to fix it... but for me to see the right color on the Eizo(this is my main color and superior display), it needs to be the main monitor(menu bar) in 10.6.2.
    So, you can see my trap - Accurate color, or annoying cursor artifacts left on the screen (sorry, it really bugs me as I work) as I work in Painter.
    Attempted fixes: Trashed all of Painter's prefs, all of Wacom's Intuos 4(latest driver) prefs and software, switched plug ins on the back of the mac for the displays(lots of restarts), ran cache cleaning Cocktail and DiskWarrior, etc. -- no change, as I can duplicate the issue w/ the above set up. A sidebar or maybe be very related note: I have an iMac w/ max amount of ram (model not very old -- maybe 1 or 2 old) and I have had a long standing issue working on the iMacs we have had w/ this brush cursor artifact problem (in Leopard and Snow Leopard). I am on one monitor w/ the iMac, so you know here the menu bar is...hmmmmmmmm.....?
    Thanks!, T

Maybe you are looking for

  • EOIO to EO Queue Problem

    Hi Guys,    I'm facing some issues in Queue processing. My scenario is like the JMS to R/3. Sender JMS adapter uses EOIO Queue. The receiver IDOC uses the EO queue ,  I mean its processing in the trfc mode. The scenario works fine in the Dev system,

  • Coldfusion CMS

    Hi, I need some advice, looking at a 3rd pary cms  and would like some suggestions. I need to be able to - have mulitlingual pages - add child pages to the main menu - have flexible templates so users can create the child pages. I am looking at Mura,

  • Addition of Node based on some criteria

    Hi Experts, My scenario is to add the details of one table of a tab1 to another table of tab2. I need to add the details of a Msg_Id of status "High" of the table of tab1 to the table of tab2. I need to check the condition and then add.. Can any one

  • CLEAN UNDO TABLESPACE

    Hi Group We need to free up an old UNDO tablespace (TS_ROLLBACK) because we have created a new one (TS_UNDO), ¿how can we do that?, we need to drop old UNDO tablespace but it keeps some extents active more than 4 days. OWNER     SEGMENT_NAME     TABL

  • Buying a home, student loan reporting questions HELP!

    My fiancee and I have decided to buy a house in our area, we got a somewhat green light from our mortgage broker but he had stated there were some things that needed to have letters of payment or more information on them in order to proceed. The item