Line of Pixels Intermittently Failing

Dear Forum,
i have a line of Pixels on my iPad screen that fails intermittently. Its not all the time, just every now and again.Odd as it sounds.
Is this the type of thing a genius bar can run a test on? i cant seem to 'force it' to happen so didnt want to make the effort and go to a Genius if it doesnt happen

Make an appointment at your local apple store and have them check it out.
If you can, prior to that appointment, since you can't easily replicate it, see if you can video tape it messing up. Just so that you have proof
Or when it's doing it, take a screen cap (hold down the sleep and home keys together and release them, like you would the shutter of a camera. ou'll see a white flash and hear a camera sound, the cap will be in your photos app)
Just so that you can take proof in of what it's doing

Similar Messages

App-V apps intermittantly fail to install via SCCM

Hi,
I have a few sequenced apps deployed using SCCM to our work computers. These apps are deployed to User collections. When a new computer is brought online they intermittently fail to install, however if you manually 'retry' the installation in
Software Center, after the 4th or 5th attempt of retrying they install successfully. Some apps fail to automatically install far more than others with one app failing to install consistently.
When the apps fail to install the streaming-transport debug log shows errors for Auto-Proxy detection and failure to send or receive HTTP responses to the distribution point full path to the .appv package file. Send failures return an HResult of 0x80190193.
Receive failures return an HResult of 0x80190193 or 0x80072f0c.
The AppEnforce.log file returns an HResult of 80190193 and "The provided URL could not be resolved. Please check that the URL is valid." I assumed this to be the FQDN part of the command line that points at the DP package location.
The bit that puzzles me the most is that if it was a problem with the DP then surely none of the apps would install, and certainly a persisting with a manual 'retry' wouldn't produce a successful install result.
We use a proxy server. AutoDetect proxy settings in IE is disabled and the FQDN of the Site Server/Distribution Point has been added to the Intranet Zone in IE. If I tell IE not to use a proxy at all I still get the same errors (including the
auto proxy detection error) in the Streaming-transport debug log for the apps that have failed to install.
The App-V 5 deployment types are all configured to stream rather than download and run. If I switch them to 'download and run' they all consistently install without errors.
App-V clients are configured to use 'shared cache mode' and 'package scripts' is enabled.
Our environment is as follows: SCCM 2012 SP1 running on Server 2012. App-V 5 SP1 clients installed on Windows 7 Enterprise with SP1.
Any ideas as to what is going on would be welcomed as I've been tearing my hair out with this for a week!
Event logs - server and domain names have been changed - Streaming-Transport debug log:
Event ID 85
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      85
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
Auto proxy detection for URL
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed with status Unknown HResult Error code: 0x80072f94
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>85</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.223458300Z" />
    <EventRecordID>472</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="StringValue">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
    <Data Name="Status">-2147012716</Data>
</EventData>
</Event>
Event ID 66
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      66
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
HTTP response receipt from
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed. Status: Unknown HResult Error code: 0x80072f0c
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>66</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.312531300Z" />
    <EventRecordID>476</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Status">-2147012852</Data>
    <Data Name="URL">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
</EventData>
</Event>
Event ID 67
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      67
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
HTTP request from
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed. Status: Unknown HResult Error code: 0x80190193
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>67</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.325397400Z" />
    <EventRecordID>478</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Status">-2145844845</Data>
    <Data Name="URL">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
</EventData>
</Event>
Event ID 110
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      110
Task Category: Transport stream request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
Http Send request on URI
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv with header failed with status Unknown HResult Error code: 0x80190193.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>110</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.325397400Z" />
    <EventRecordID>479</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="URI">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
    <Data Name="Header">
    </Data>
    <Data Name="Status">-2145844845</Data>
</EventData>
</Event>
Error in AppEnforce.log
<![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:07:38.954-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appvclientconfig5x.cpp:64">
<![LOG[The package with GUID efaa1d42-dc70-4fc0-8976-fb692e83c395 is not installed on this machine yet]LOG]!><time="10:07:38.964-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552"
file="appvpackagequery5x.cpp:177">
<![LOG[Package: WinRAR 4.20 Win7 x64 with version GUID 6d7400fc-169b-4fa1-b292-29fdac24cae4 is not installed. Will install it]LOG]!><time="10:07:38.965-60" date="08-28-2013" component="AppEnforce" context=""
type="1" thread="2552" file="appv5xhandler.cpp:459">
<![LOG[Configure the package WinRAR 4.20 Win7 x64 as streaming. Use content ID Content_5f364464-dd13-4bb2-8142-3c41850f5e49 and content version 1]LOG]!><time="10:07:38.965-60" date="08-28-2013" component="AppEnforce" context=""
type="1" thread="2552" file="appv5xhandler.cpp:475">
<![LOG[Using content path <a href="https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv]LOG]!><time="10:07:39.206-60">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv]LOG]!><time="10:07:39.206-60"
date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appv5xhandler.cpp:494">
<![LOG[Running App-V command ["C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage
-Path 'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml'] for the machine]LOG]!><time="10:07:39.211-60"
date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appvcommandutil.cpp:117">
<![LOG[    Executing Command line: "C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';
Add-AppvClientPackage -Path 'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml' with system
context]LOG]!><time="10:07:39.211-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appexcnlib.cpp:345">
<![LOG[    Process 3948 terminated with exitcode: 1]LOG]!><time="10:07:42.823-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appexcnlib.cpp:431">
<![LOG[Here is the error message generated by the process:
Add-AppvClientPackage : The provided URL could not be resolved. Please check
that the URL is valid. HRESULT: 80190193.
At line:1 char:106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : NotSpecified: (:) [Add-AppvClientPackage], COMEx
   ception
    + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Micr
   osoft.AppV.AppvClientPowerShell.AddAppvPackage
]LOG]!><time="10:07:42.823-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path
'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml'] failed with return code 1.]LOG]!><time="10:07:42.823-60"
date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvmanage5x.cpp:86">
<![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (4 seconds) for App DT "WinRAR 4.20 Win7 x64" [ScopeId_86A33434-E76B-408D-8910-C2EADC8E3BA0/DeploymentType_93e3e297-e10c-421e-a178-fe43212b1bde], Revision: 2, User SID: S-1-5-21-3578899820-3203048151-3782333795-4928]
++++++]LOG]!><time="10:07:42.826-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appprovider.cpp:2366">

Hey Tim,
Since we're targeting vmware view machines in floating pools with roaming profiles we can't really go live with download and execute as the users will stab away at the dead shortcuts and raise calls with service desk until their apps finish downloading.
Going to try and resolve the intermittent Add-AppvClientPackage
and
Publish-AppvClientPackage
and return to the SSL issue later.

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

IN A BATCH PROCESS TO SELECT A DIFFERENT LINE OF PIXELS?

Hi there,
I am trying to make my own slit scan image by selecting a single line of pixels from many frames.
From the first frame I would like to select the first line of pixels. From the second frame I would like to select the second line of pixels and so on. Then for this process to repeat itself.
It has been suggested that I can do this using the batch process in Photoshop however I cannot figure out how to do it!
If there is a simplier way then please get in touch.
Thanks
Elena

You should ask in the Photoshop forum.

Strange lines in pixel-preview mode

Hi! I have a problem.
When I'm drawing something with two windows (one is usual other in pixel preview) I have some strange white lines in pixel preview window. How can I solve it?
Hope picture will clarify my question.
Link to full size picture: https://dl.dropbox.com/u/33643074/white-lines.png

There are no white lines in output icon. These lines are not objects, they are just bugs of Illustrator. When I zoom out and immediately zoom in window with pixel preview - white lines dissapear. But when I change something in usual window (moving any object or rotate) these lines appear again (only in pixel-preview window)!
My file:
https://dl.dropbox.com/u/33643074/icon.ai

A line of pixelation went out

It's a brand new iMac and a line of pixelation went out. It looks like it is bleeding from inside of the screen.

This sounds like a possible hardware failure, perhaps the graphics card or the display. If your machine is less than 90 days old or if you have already purchased AppleCare (highly recommended) give AppleCare a call. You can find the number in the owners manual. If you don't have AppleCare or the machine is older than 90 days old then make an appointment at your local Apple Store or AASP and take it in for service.

How can i make line of pixels?

i want to make a line of pixels to use it as a track so that i can make the train to animate right on it...if thier is any other way of doing so plz tell me...code needed

How about java.awt.Graphic.drawLine?

TS3274 A line of pixels about one inch flash red on FaceTime and some web pages

Just as the title suggests a line of pixels an inch long flash red on some web pages and all the time on FaceTime

Uninstall Mackeeper and Avast.
Myth of the Dirty Mac
MacKeeper – Do Not Install
MacKeeper – Do Not Install (2) See SDW2001’s post
MacKeeper – Do Not Install (3)
MacKeeper Removal
Avast! Uninstall
uTorrent and iAnti Virus probably aren't helping either. Go to the developer's web site to find un-install instructions to make sure you completely remove all portions of the program.
Safari 5.0.1 or later - Slow or partial webpage loading, or webpage cannot be found
Safari - Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Safari Problems

Mysterious line of pixels

(New to Discussions)
Problem- I'm getting these weird lines appearing on both the Macbook Pro LCD and my external LCD. It happens completely random and no crashing of apps occurs. It shows up on the desktop, Safari, FCP, and almost all other apps. It's not that big of a deal and sometimes you can move a Finder window over it to make it disappear. But it is bothering me when doing some editing and web design. I have captured a screenshot of it occurring in Safari.
http://www.sethmccollum.info/Picture_1.png

I have this as well, and it has been an issue for about 3 or 4 months now. I thought it could be an overheating issue, but have seen it happen when I have SMC fans running max speed and my MBP being at a low temp.
I wish someone knew what was causing this.
Also, i had spilt water on my AC adapter about 7 months ago, and it ran fine until just recently it started to smoke so I went ahead and bought a new ac adapter...one of my thoughts was that my bad Ac adapter was sending too high of a voltage causing graphical errors within my MBP...not sure if that is the case cause I have not seen any of these lines of pixels since I bought a new adapter. Along with these pixel lines everyone is seeing, my computer sometimes freezes when using graphics heavy programs (Photoshop/iphoto/watching a video on iTunes @ same time ect) And am not sure if it is linked to the graphical pixel lines.
Hope someone can help, here is a picture of the pixel lines I managed to get:
[IMG]http://i2.photobucket.com/albums/y5/AlexPuckett/Messupx2.jpg[/IMG]

Solid line of pixels in my warped gradient. Can anyone explain/help?

Hello all,
So this is very odd. Here's the breakdown and steps I've taken so far.
I create a new layer and fill it with black. Then I make a new layer and make a marquee selection. Within the marquee selection, I fill the new layer with a color to transparent gradient fill. I then take the new gradient layer and warp it using the "FLAG" preset. I adjust the bend to 20% and commit the warp/transformation. I get the curve I want, but right in the middle of the curve, running straight up the layer, is a solid line of pixels. It's almost as if, that one little line missed out on both the gradient itself as well as the warp effect.
Very odd indeed. Can anyone please explain what might be happening with that?
Much appreciated.
v/r
Jake McCarthy

Gerbert2001, I had tested in CS6 as the OP had not mentioned their version and could not reproduce the issue.
But in Photoshop CC I also get offending results.
parascopelv, you may want to post a bug report on the issue over at
http://feedback.photoshop.com/photoshop_family/
or see if one already exists.

BATCH PROCESS TO SELECT A DIFFERENT LINE OF PIXELS

Hi there,
I am trying to make my own slit scan image by selecting a single line of pixels from many frames.
From the first frame I would like to select the first line of pixels. From the second frame I would like to select the second line of pixels and so on. Then for this process to repeat itself.
It has been suggested that I can do this using the batch process in Photoshop however I cannot figure out how to do it!
If there is a simplier way then please get in touch.
Thanks
Elena

Hi,
This is the Photoshop.com forum, which is the online forum for Photoshop.com web site.
You'll get the best response if you post over in the below mentioned Photoshop forum:
http://forums.adobe.com/community/photoshop
Regards,
Komal

Using actionListeners to move a line 20 pixels in every direction

I'm trying to create an actionListener for a button. I need to be able to click on the button and move a line 20 pixels in every direction. But i have no idea how to do this. I'm supposed to have an object in my ColoredLine class that allows for me to use with the ActionListener class but I don't even know what that means. Here is my ButtonForLine class that implements listener and my ColoredLine class that gives the original line.
public class ButtonForLine implements ActionListener {
          public int q;
          public int w;
          public int e;
          public int r;
          public Color color;
public void actionPerformed ( ActionEvent e ) {
     ColoredLine move= new ColoredLine;
public ButtonForLine( ) {
     q = (left + 20);
     w = (top + 20);
     e = (right + 20);
     r = (bottom + 20);
public class ColoredLine implements Drawable {          //creates all instance fields for entire class
     private int left;          //colored lines store the positions of their left, top, right, bottom, and color
     private int top;          // of their lines. It also stores the same positions for the twin lines.
     private int right;
     private int bottom;
     private Color color;
     private int q;
     private int w;
     private int e;
     private int r;
Creates a colored line. It calls for the new positons of the color swatch.
@param x1 the top left of the line
@param y1 the top of the line
@param x2 the bottom right of the line
@param y2 the bottom of the line
@param c the color of the line
public ColoredLine( int x1, int y1, int x2, int y2, Color c) {
     left = x1;
     top = y1;
     right = x2;
     bottom = y2;
     color = c;
Draw a colored line using a graphics context
@param g the graphics context used to draw the line
public void draw( Graphics2D g ) {
     g.setColor( color );
     g.drawLine( left, top, right, bottom );
public ColoredLine move() {
     q= (left + 20);
     w= (top + 20);
     e= (right + 20);
     r= (bottom + 20);
     ColoredLine moved = new ColoredLine( q, w, e, r, color );
     return moved;
}

[jverd's point|http://forums.sun.com/thread.jspa?messageID=10854585#10854585] was not necessarily to repost this question under a different title (much better title, BTW).
But you seem to have missed point 2). Please use the code tags when posting code, code snippets, HTML/XML or input/output.
Note as well, that the message posting form offers a tab at the top to 'Preview' a post - to see how it will look in the forum.

Mail app intermittently fails to connect - internet accounts preferences cannot connect, then unable to verify name or password. Why?

Running 10.10.2 on early 2011 MBP, 8 GB RAM.
Mail app intermittently fails to connect - message: internet accounts preferences cannot connect, then unable to verify name or password. No problem with iPhone to connect same 3 accounts. Have run Disk Utility and rebooted. What is happening?

Same issue, too. But I have nothing better to do than try to fix Apple problems that appear mysteriously and randomly; I'm sure you're the same way.
The REAL REASON, which can no longer be overlooked, is that Apple's (probably underpaid sweatshop Chinese) employees build toys for grown-ups and do little more than that. I wish I had never bought my Mac (2009) since few things about Apples are "intuitive" unless you've been an Apple cultist since Jobs introduced the first Mac. Oh, and because things mysteriously stop working, something I don't recall happening with any of the PCs I've owned.
Apple's version of Excel is a total joke and on an update that I did not ask for, the "Save As" feature, a convention that was 30 years old and worked well, was removed in favor of "Duplicate, Rename, Save." What 22 year-old Apple product manager was allowed to make this change?
I foolishly compounded my Mac purchase error by buying an iPhone 4S. On that lovely ($200 Verizon-subsidized) product, I can no longer discover my home network, rendering my ($100) Airplay for outdoor music useless. (But I probably can post a picture directly to Facebook or something! More toyish behavior in which Apple specializes.) Can I get support on these POS with a phone call? No, I need to rely on a Aapl cultist to devise some esoteric key combo or a "jailbreak" on a Support board or blog site.
I'm eligible for a phone upgrade on 8/13 and I'm counting the days. Will upgrade to a good large-screen laptop asap as well and then throw the Mac out my office window. Junk, just junk. Apple's stock is at $433 from $700 and it's still overpriced. How long will this rant last before it's sanitized by the Cupertino Big Brother? Maybe what the children who design product ought to do instead is BUILD BETTER STUFF.

The lines are pixelated

I have been away from Adobe CSS for a while now, so I need a little help. I'm designing a logo, but having some problems creating nice faded lines. Also i cant move the little blue circle in the horses eye (guideline?). I hope that someone can tell me how to make the line less pixelated. Thank you very much.

I suppose you do it in Illustrator. Did you have placed the file in InDesign because you are asking here?
Did you have turned on the Display Performance on High Quality?
If you have done the file in Illustrator and have used effects which will make a rasterized output how are your Document Raster Effects Settings (Effects) in Illustrator, and if so, how was the graphic scaled in InDesign?

Vertical faded pink lines and pixelated fonts in the Menu, how to fix?

Hi there,
I bought my iMac in Jan 2010, and just after my Apple Care expired three years later I started to have some problems I have no idea how to fix, hope someone can help.
When starting the computer, I get either a grey screen (I cannot go further or see anything else), or after starting the computer, seems like only the screensaver works, and if you try to open any menu, you'll get a black screen.
All this happened right after the last update.
I followed all the steps advised by Apple to fix the grey screen, but none of them worked.
I also formatted the hard drive (I was using 10.8) and installed other OS (10.6).
It worked well, except that I got now time vertical faded pink lines right after starting the computer, and the fonts in the menu looks like pixelated, they're not clear. but it only happens with the menu, Safari and other programs look fine.
Any idea what's going on?

This looks as though you may have a failing GPU.
You can try these resets that may help, but it looks like a hardware failure.
You may want to take it in to an Apple store genius bay, they will diagnose it for free and give you your options.
Reset SMC:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

Line of Pixels Intermittently Failing

Similar Messages

Maybe you are looking for