Line Out in Software 2.0 Not Working

Shortly after upgrading to the 2.0 software on my 1st gen iPhone, I docked it in my Universal Dock, with some speakers plugged into the line out (like many times before). I didn't get the airport mode prompt, and it didn't chirp, like it always had. When I played audio, it only played through the speakerphone speakers, not through the dock. I restored the software and re-synced everything and it started working, but I've since noticed it not working on a speaker-dock, a Belkin iPod car charger with line out that I've used since I got the iPhone, and also in an iPhone dock (which I tried plugging my headphones into). It charges fine through all of the above, but the line out does not work. What could be wrong? Is anyone else experiencing the same thing? Thanks.

I'm having the exact same problem, or at least one very similar to the above one.
I have a first generation iPhone that is now on firmware 2.0.1
I did not try using the line-out on the dock before now.
When I put the iPhone into the dock (have tried both with power in from wall and from computer USB and without power as well) and connect computer speakers or headphones to the dock's line out with my iPhone in the dock I get no audio from the speakers/headphones... audio only plays through the phone's speakers.
How do I get it to switch to playing through the dock's lineout?

Similar Messages

Line Out (Lime Color) Right Side not working.

I plugged in a 3.5m into my Line Out, I have it connected to my stero aux. My stero is working fine and everything with the sound is working right. No shortage in my wires. When I plug it into my Headphone jack it works fine but in my line out the right side only works but the left side sounds really really low. I have adjusted the levels and balance.
I think that the Maufacture must of missed up on the line out size. That's the only thing I can come up with.

this has happened to me. What part do I need to ask for in the shop. My sound was muffled, but I removed the speaker plug from the back and put it in the headset in the front and the whole thing is great now. I just need to now what part I need to ask for so I can fix it. I will google how to do it.
7 - Audio: Line Out (lime)
Heres my specks
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01486318&lang=en&cc=us&taskI...

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business! I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar. I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade. We tested it with an iPad that had not been upgraded, no problem.

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

XP software disc does not work on 8.1 HP PSC 2355v All in One Printer

Please excuse my novice actions in the subject description as I put my problem and request there. Basically: My XP software Disc will not work on my Windows 8.1 computer for my HP PSC 2355v All In One Printer. Needless to say I can print with a downloaded driver but can not use the Managerial software on the XP disc. When I try to work from the printer it does not recognize the computer, so is there HP software out there that can be downloaded simply to my computer? If so, Where and How can I get it. Thanks again.

Hi,
Unfortunately no more support after Vista but you can use basic function of the printer using the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N135752
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

SCCM 2012 Software Metering is not working

SCCM 2012 Software Metering is not working in our environment. Other than software metering, reports work just fine.
I have created a few simple software metering rules with “Acrobat.exe” and “Outlook.exe”. Rules are enabled. Rules were on at least 6 months.
When I go to software metering reports, Month parameter value is empty and I can’t choose any value.
I ran runmetersumm.exe on our server, it did not work as intended. :
Summarizing data up to 0 hours old.
File Usage Summary added -1 rows in 0 seconds.
Monthly Usage Summary added -1 rows in 0 seconds.
I am stumped. Why would it add minus rows?
Any ideas how I can make software metering work on our environment?
Thank you

Finally figured it out.
mtrmgr.log did not find any rules when I ran executables. So I knew it wasn't working on the server side.
After searching for a while, I found the solution from the link below:
http://social.technet.microsoft.com/Forums/en-US/8f048512-c357-437e-89ec-cee5356a10b1/software-metering-reports-empty?forum=configmanagergeneral
1. Deleted RULECHG.RTA under policypv.box folder
2. Removed and recreated metering rules again.
Everything is working again now.
Thank you.
I do wonder how to avoid those problems going forward though.

My FaceTime with the new software upgrade is not working

My FaceTime with the new software upgrade is not working.how do I fix this

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing! I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not.
Anyone else feel me on this?
any help?

Well that still didn't make any kind of difference. I would just do without it but I've becomes really use to it with Avid for so long. I have to admit there are a lot of small moments like this that makes me miss Avid. Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

In my Adobe reader, "Read out Loud" is feature is not working!!

Can anyone help me please? "Read out Loud" is feature is not working for my adobe reader. There is nothing fault with pc's sound as I've checked it too.

Are you sure the file contains "real" text? Can you select it using the Text Selection tool (next to the Hand tool in the toolbar)?

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

Widgets, Safari, Software Update -- All not working since I got Comcast

My Dashboard, Safari and Software Update have not worked since I got Comcast internet. I'm pretty sure their installer screwed up something, but I don't know how to undo it. Firefox, Adium, Mail and other internet applications all work great.
I tried to fix the Software Updater problem a while ago and was able to get it to see what is available (by adding swquery.apple.com to the sites that bypass proxy settings), but it still refuses to download anything.
I can't help but think there's one thing that's causing all this trouble. Any thoughts?

You can have up to 5 computers authorized at one time with iTunes. There's no reason to deauthorize until you want to go over the limit. You can do this once a year. Do a clean install of the OS on the mac you are selling.
hpr3

Software restriction policy not working correctly

Ladies and Gents,
we run a windows server 2008r2 environment.
we have a software restriction policy in place for quite some time now and it's been working fine until about a week ago. here's how we have it setup:
Enforce = All Software files except libraries (such as DLLs). + All Users.
Security Level = Disallowed
Designated File Types=
Defaults
Additional Rules:
C:\* = Disallow.
The rest of the rules are paths for files and folders that we have set as Unrestricted.
Since about a week ago, our security team discovered that they can open any allowed file type such as text file, and then go to file and click on open. In the open dialog box they would type
in C:\Windows\System32\drivers\etc\hosts and then click and open it would actually open the hosts file.
I even tried adding a path rule for C:\Windows\System32\drivers\etc\hosts with Disallow, and it’s still allows opening this file for non admins.
Any ideas as to why is software restriction policy not blocking access to any files or folders that are not explicitly allowed via a path rule?
Any help or comments are much appreciated.
Mohsen Almassud

You are moving in a wrong way. Software Restriction Policies are designed to prevent users to launch executables/applications. It cannot prevent you from opening TXT file, because it is not an executable. In order to prevent TXT files, you have to block
notepad.exe executable. It is very different technology.
You must move to a permission configuration. If there are folders users should not access, remove them from respective folder's ACL. You must be careful with restricting user access to system folders (%systemroot%), because you may block critical applications
and eventually no one will be able to log on to server, because logon-dependant paths are not accessible due to restrictions in the ACL.
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Check out new:
PowerShell FCIV tool.

Pure Music software player is not working with iTunes 10.4 and Lion 10.7 playing wav. files.

Pure Music player from Channel D software will not work when playing wav. files after updating to Lion OS. I can open the application as usual but after playing one song it will not advance to the next track either on its own or manually. The scrolling track name goes dim and I cannot get the play button to respond. Has anyone else experienced this problem?
Ron

Thanks Limnos, but unfortunately the same error still remains.
The disk was OK. Permissions had errors along the lines of groups should be 0, is 80. I repaired that. Tried again to open, then reinstalled (new download again), but again the same problem.
I checked permissions again and some of the 0-80 errors came again, but no clear reason from there I think
Was also a SUID warning on ARDAgent but I see online that doesn't appear to be something abnormal.
I tried reloading Lion but the installation came back with software appears to have been tampered with (I think the dmg file is gone as I couldn't find it). I then went to email to report a problem so I could download again but of course that whole process doesn't work because itunes wont open.
So Stuck
if there is anything else I might be missing?

Line Out in Software 2.0 Not Working

Similar Messages

Maybe you are looking for