Line-pattern in movies imported

After importing movies taken with Sony HX9V in HD, a line-based pattern starts to exist in the imported movies. I might not have access of the original files from the HX9V. Is this solvable? See this link for a visual: http://i.imm.io/BFW7.png
The line pattern exists more significantly in moving objects and is nearly not visible in static areas of the movie.

Never create a line pattern at an angle. It's unnecessary.
Create the pattern at 90° angles then use Object > Transform > Rotate and tick the "Transform Patterns" option and enter the angle you are after....
Trying to get angled lines to match in a pattern can take considerable effort. Where as with this method you can create the pattern and rotate it in a matter of minutes. Let Illustrator work for you rather than against you. And, you can rotate to any angle so the pattern will function in multiple ways.

Similar Messages

LUMIX TZ7 movies import unsuccessful: is this normal in FCE4.0.1?

I tried to make a search of my problem but not fully successfully.
As said in the title , I have a lumix TZ7 that can record AVCHD movies: in spite of this, if I try to import them in FCE4.0.1, with the log and transfer function, they are readable but no import occurs (after dragging the media file into the queue window): the transfer does not start at all, and after a few seconds, a red claiming point is shown on the line of the being imported file, without additional information and without file transfer onto the scratch disk.
I tried to change, in the easy setup window, the codec (from 1080i50 to 720p30 etc...) but unsuccessfully. These movies are imported without problems under iMovie 9: is it normal that I am not able to import them with FCE4.0.1?
Thank you for your help
Emanuele

califfo1975 wrote:
.. so it is a limit of FCE (at least vs. iMovie 9) ..
it is and as iMovie demonstrates, it is technically possible..
that lite-format, although no 'official' AVCHD format, gets more and more popular on still-cams, plus the evolution of iM, away from 'serious' movie-making = FC/e has to fill a gap, should result in some update of FC/e for that format.
don't hesitate to tell Apple:
http://www.apple.com/feedback/finalcutexpress.html

How to add new line in transact move order line

Hi,
i am able to update locaotr in Transact move order.
But i want to add two locators for the same line.
I tried to insert one more record in data base, but getting error unique index error.
so how can we add new line in transact move order line .
please help to slove this isse.
Thanks In Advance
Venu.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

Back order line in transact move order form , drived the inventory negative

Hi,
I had problem with transacting some lines in several move orders (it was stuck and giving error each time I tried to transact or delete from view update allocation –> delete line)
In order to cancel these lines to proceed the manufacturing process I back ordered those lines by:
Inventory super user - > move orders - > transact move order - > tools - > back order line
Note that the move orders type was Manufacturing Pick
Now I noticed that this drives the WIP subinv Negative for those items .
So what is the problem and how can I solve it?
Thank you
Edited by: Ahmed.Abbas on Apr 16, 2011 2:39 AM

hi,
The problem was in the interface managers (Material transaction , Move transaction ) were inactive , i launched them
Review note 141493.1 in metalink to know how.
I also deleted the pending transactions with errors from mtl_material_transactions_temp and mtl_transaction_lots_temp ( the items were lot control ) .
Thats all :)

FM10, Dashed Line Pattern

In the Graphics Toolbar of FM10, when I select "Set Dashed Line Pattern", as soon as I select the dashed line, the window closes down, before I get a chance to click "Select" at the bottom of this window. I am thus unable to select the style of dashed line I want to use. Is this a bug in FM10, or am I making a mistake in the way I try to do this action? When I try to click "Selected Dashed Line Pattern" next to it, nothing opens up.

Kathi,
It sounds to me like a misunderstanding of that little pop-up box. It serves two purposes:
Select the dash style using the Set button, which opens the style selection dialog
Select whether the current graphic object will use a solid line or a dashed line using the upper two buttons
The assumed workflow might be this:
Click Select and select the dash style you plan to use most of the time.
Select any graphic object and click either the Dashed Line or Solid Line buttons.
If you want to change the dash style of an already dashed object, select the object and then use the Select button to open the dash settings window and select a new style.
- Michael
PS: Some details can be found in the Online Help

When I import movies to imovies from a camcorder, the sound does not import. IPhone movies import completely.

I'm trying to import movies from a Canon camcorder into iMovie. The picture imports ok but there is no sound.
I've tried using camera connected as well as card reader. The card is a 16gb SD card.
iPhone movies import ok with sound as well as video.

in your iPhoto preferences is look up location set to "automaticaly"?
LN

How to create diagonal variable line pattern in CS6?

Hi guys
I'm on the brink of insanity with creating my diagonal line pattern. I've tried everything I can think of but the pattern is an absolute mess! I want to create a diagonal line pattern but I want the lines not to be uniform. Basically I've made a group of 3 lines and then one separate line on its own, then to repeat this as the picture below. I've used the distribute function so the distances between the lines is identical everywhere. I've then rotated the whole thing exactly 45 degrees and aligned the lines to fit the bounding box in the "make pattern" mode as shown. Yet the resulting pattern is just a mess of overlap ugliness. All I want is for the pattern to literally look as it does in the image on the left, can someone please tell me how to sucessfully do this in CS6?? Would be eternally grateful!!
Desired pattern: Result:

Never create a line pattern at an angle. It's unnecessary.
Create the pattern at 90° angles then use Object > Transform > Rotate and tick the "Transform Patterns" option and enter the angle you are after....
Trying to get angled lines to match in a pattern can take considerable effort. Where as with this method you can create the pattern and rotate it in a matter of minutes. Let Illustrator work for you rather than against you. And, you can rotate to any angle so the pattern will function in multiple ways.

Artifact Lines in Line Pattern Swatch

Hi,
I am trying to use a basic line pattern swatch as a fill. It all looks fine in Illustrator but when I go and try to save it under "save to web and devices" the fill pattern shows extra lines in the pattern. These lines are darker and run in a different direction. There are not many of them but they definately ruin the pattern fill. This doesn't happen with all the line patterns, usually just the one I want to use (LOL).
Are these "artifacts" caused by the swatch itself? Is there anyway to get rid of them?
TB

Hi,
Thanks for the reply. Here is the image. It is a GIF.

Multi line pattern search with like

Hi All,
I am using oracle 9i. I want to search for multi - line pattern.
for e.g.
update tablename
set columnname .
I used select * from user_source where text like '%update tablename%set columnname%' but this only seem to work if update tablename set columnname is in the same line .
Thanks.

Well, no wonder it does not work. USER_SOURCE stores one line of text per row, so column text by definition can not contain multi-line strings . One solution could be analytic function LEAD:
SQL> create or replace
2    procedure p1
3      is
4      begin
5          update emp
6             set ename = ename;
7 end;
8 /
Procedure created.
SQL> select distinct name
2    from (
3           select s.*,
4                   lead(text) over(partition by name order by line) next_text
5             from user_source s
6          )
7    where text like '%update emp%'
8      and next_text like '%set ename%'
9 /
NAME
P1
SQL> SY.

Setting Line Pattern for Lines

Hi All,
How to set line pattern for Lines? I am trying to use Line Pattern to draw some thing like "======" ( with out gap though I used equal symbol to draw I don't have other way to show an example). I have tried setting line pattern it is not working any one help is much appreciate.
Thanks

Hi,
Actually you can draw two lines and keep the distance as sme as you are trying to show by equal sign. Just remove tick from Snap To Grid option from View>Snap To Grid then you can adjust using the arrow keys.
-Ammad

Line Pattern

somebody please help me to create this type of Line Pattern.

Create a blend between two lines and then replace the spine to make it follow any path you want...
Mylenium

How can I move (import) a documents containing photos and text into iphoto

How can I move/import a document in Pages containing both text and photos into i-photo?

Since the digital download is not from Apple. Did you download the movie onto your hard drive from their website?
Once on your computer's hard drive, use iTunes > File > Add to Library... menu to import movie to iTunes.

How to reinstall plugin Media Core CFHD AVI importer 32 and MOV importer 32.pm?

I instralled the After Effects trial program and it was running okay for a few days, then I was hit with a warning to reinstall plugins. How to reinstall plugin Media Core CFHD AVI importer 32 and MOV importer 32.pm?

Has anyone figure this out?
I started getting this after installing GoPro Studio 2.
Uninstalling it and even deleting the plugins manually didn't work, and neither did reinstalling AE.
All I could get was stop getting the error message at start-up but the problem is that any .AVI file that I import only plays audio, no video.
Please, any help appreciated.

Green/Red Line Appears on .mov when exporting

Hi,
There's a green/red line that appears on the RIGHT SIDE when I export my presentation to QT. I'm using H.264 @ 24fps with Multipass encoding at best quality. I'm not including audio or transparency.
The slide size is 355x200.
The contents are vector graphics, images, and videos.
However, no videos are right justified.
I'm using KN 3.0.1 Trial and have QT Pro & Flip4Mac Trial installed.
What are the reasons for this line in the .mov and how do I fix them?
Is it the shadow effect on the actual slide canvas?
I've exported files successfully in the last week since I've had my MacBookPro.

Hi,
There's a green/red line that appears on the RIGHT SIDE when I export my presentation to QT. I'm using H.264 @ 24fps with Multipass encoding at best quality. I'm not including audio or transparency.
The slide size is 355x200.
The contents are vector graphics, images, and videos.
However, no videos are right justified.
I'm using KN 3.0.1 Trial and have QT Pro & Flip4Mac Trial installed.
What are the reasons for this line in the .mov and how do I fix them?
Is it the shadow effect on the actual slide canvas?
I've exported files successfully in the last week since I've had my MacBookPro.

Line added to movie clip doesn't appear

Hi,
I'm trying to add a line to a movie clip. When I trace the width of the lineadded it traces correctly, but the line doesn't appear. If I do everything the same but add the line to the stage instead of the movie clip it does appear. I know this is one of those cases where I can't see the forest fro the trees but I sure would appreciate any insight you can give me.
Here's the relevant code:
var xAxis = new Shape();
graph_mc.addChild(xAxis);
xAxis.graphics.lineStyle(2, 0x000000, 1)
xAxis.graphics.moveTo(startX, startY);
xAxis.graphics.lineTo(maxX, startY)
xAxis.name = "xAxis_mc"
Best regards,
Chris McLaughlin

Hi kglad,
Thanks for this. I helped me realize that I was basing the placement on the stage rather than the movie clip on the stage. When I moved the starting X and Y positions to 0, it appeared.
Best,
Chris

Line-pattern in movies imported

Similar Messages

Maybe you are looking for