Line Problem During Dry Weather....

Hi all,
I am after some help from people in the know here if possible.  A basic overview of my issue is that spring/summer last year I had intermittent noise on my phoneline which was annoying because it made phone calls difficult, and kept on knocking out my broadband connections (also with BT).  3 engineers visited, but the **bleep** was that when they came out, there was no noise so did nothing (even though apparently they put on case notes that they each fixed the problem, but that is another issue).  The problem vanished from roughly September onwards, and things returned to normal.  Until about 6 weeks ago, when the same problem returned for about 5 weeks.  I was hoping it would sort itself out again as I couldn't bare another few days off work for engineers to say nothing is wrong.
Just when I had lost all hope and about to raise a concern, things got better, the very same day we had our first rain in Kent for approx a month and a half (which is why I remember).  Casting my mind back and looking at records I kept, the intermittent problem was during prolonged dry spells last year too.
So my question for you helpful board members in the know is.....does that resonate with any of you?  Could there be some kind of fault that screws up my line when it dries out??
As you can probably tell, I'm not especially technical, so apologies if this appears to be clutching at straws....
Thanks so much in advance.
Stacey
PS searching doesn't seem to bring up any related issues, however the keywords i use maybe the issue...

Also, i don't know what the **bleep** is for, i didn't swear!

Similar Messages

  • Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you

    Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you

    You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
    this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
    http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

  • Problem during installation of Solution Manager

    Hi All,
    I am facing problem during the installation of solution manager. it shows following error during installation
    ERROR 2010-05-21 14:39:24
    FJS-00003  TypeError: this._name has no properties (in script NW_Doublestack_SCS|ind|ind|ind|ind, line 5140: ???)
    ERROR 2010-05-21 14:39:25
    FCO-00011  The step collect with step key |NW_Doublestack_SCS|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
    Please also let me konw how much space do we require for installating the Solution manager as a central system on one drive?

    Hi Chandan,
    Well may be below SDN thread will help you... out ! try out with Curd Abstoss Response !!
    Inst. SAP NW 2004s Java SP9 - Error FJS-00003 this._name has no properties
    Hope it will work for you..as well !

  • Problem during recording of CJ01 transaction for BDC

    Hello All,
    I am facing a problem during the recording of CJ01(Creation of projects) for creation of BDC program.
    The problem is during recoding after entering the the first WBS element with level 1 and i press the '+' button to create one more WBS element with Level 2,the first WBS element with level 1 goes to the bottom of the line item table and now if try to create the WBS element with Level 2 in the first line it wont allow because of the fact that the first WBS element with level 1 is below it.
    But if i enter the first WBS elemnt with level 1 in the first line and come to the next line and enter the second WBS element with level 2 it will create since Level 2 WBS is below the Level 1.But this approach cannot be used for doing a recording for BDC.
    Can anyone help in this regard
    Thanks in Advance
    Ashish

    Hi Ashish,
    NW is right. It is not proper to use BDC for CJ01. You can get more control and better if you use the following function module,
    1. Use BAPI_PROJECT_MAINTAIN to create project definition and WBS Structure in one go. see the documentation in the BAPI on how to use this. Post the resut in this forum if you face any problem
    Ravi

  • Encounter a problem during upgrade sap r/3 4.7 to ecc6

    Hi expert:
    i encounter a problem during upgrade sap r/3 4.7 to ecc6
    in START_SHDI_FIRST step.
    here is the error msg~
    MSSCRESPDEFN.LOG
    Msg 2812, Level 16, State 62, Server Jack, Line 6
    Could not find stored procedure 'dbo.sap_upg_getrelease'.
    setuser
    i checked MS SQL DB and found out that i only got 'erp.sap_upg_getrelease' but not dbo owner.
    can any one tell me how to solve this problem?~
    thanks.
    Regards
    Jack Lee

    It's the kernel for the shadow the correct?.
    Regards,
    Alfredo.

  • RFC connection problem during SRM - R/3 integration

    Hi,
    Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
    Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
    Many thanks
    Details Page 2 Line 26 System Log: Local Analysis of sapsrmt                  1
    Time
    Type
    Nr
    Clt
    User
    TCode
    Grp
    N
    Text
    10:24:58
    DIA
    000
    013
    EMREK
    R4
    9
    Communication error, CPIC return code 020, SAP return code 223
    Communication error, CPIC return code 020, SAP return code 223
    Details
    Recording at local and central time........................ 07.12.2006 10:24:58
    Task......
    Process
    User......
    Terminal
    Session
    TCode
    Program
    Cl
    Problem cl
    Package
    91342
    Dialog work process No. 000
    EMREK
    XXXXXXXX
    2
    K
    SAP Web AS Problem
    STSK
    Further details for this message type
    Module nam
    Line
    Error text
    Caller....
    Reason/cal
    thxxhead
    7192
    020223
    ThRecei
    CPIC-Er
    Documentation for system log message R4 9 :
    A CPIC function has failed.  The conversation ID and CPIC function are
    specified in the system log entries.  Use the conversion ID to find more
    detailed information about the error in the system log for the SAP
    gateway.
    Meaning of the SAP return codes:
    1) Gateway errors:
    221,,Error in CPIC-SS
    222,,Storage bottleneck
    223,,Network read error
    224,,Network write error
    225,,Invalid request
    226,,No connection yet
    227,,Gateway process terminated
    228,,Shared-Memory problem(read)
    229,,Shared Memory problem(write)
    230,,No free LU
    231,,No free gateway process
    232,,Error when starting gateway proc.
    233,,Incorrect communication type
    234,,Connection setup failed
    235,,Error in comm. table
    236,,No connection to gateway
    237,,Connection to gateway closed
    238,,Error in GW command (write)
    239,,Error in GW comm.   (read)
    240,,Invalid length
    241,,Invalid environment
    242,,Timeout
    243,,Error setting up SAP connection
    244,,Partner has closed connection
    245,,Storage overflow
    246,,Incorrect APPC header version
    247,,APPC server not started
    248,,Error accessing TXCOM
    249,,Comm. table is full
    630,,Invalid mode no. received
    631,,Max.no. of gateways reached
    632,,No LU specified
    633,,Max.no. of clients reached
    634,,Invalid TP name
    635,,fork failed
    636,,Invalid NI handle
    637,,rexec failed
    638,,TP start failed
    639,,NiDgSend failed
    640,,Internal error
    664,,Gateway host is unknown
    665,,Gateway service unknown
    666,,NI error
    667,,exec failed
    668,,R/2 restarted
    669,,Symb. destination too long
    670,,No more side-info entries
    672 ,,Logon to NetWeaver failed
    673 ,,IMS Error Purging
    674 ,,Timeout for registered programs
    676 ,,TP not registered
    677 ,,Timeout for registered programs
    678 ,,TP is registered
    679 ,,TP is not registered
    720 ,,Security breach of registered programs
    721 ,,SNC deactivated
    722 ,,SNC required
    723 ,,SNC name not defined
    724 ,,Default SNC name not permitted
    725 ,,Protocol does not support SNC
    726 ,,No local SAP System
    727 ,,SNC required
    728 ,,Conversation ID not found
    729 ,,SNS must do the communication
    730 ,,Start of external programs deactivated
    731 ,,Gateway shut down
    732 ,,No external programs
    733 ,,Conversation ID does not match
    734 ,,Net conversation error
    735 ,,Monitor is not active
    736 ,,Conv-ID is not unique
    Errors in the CPIC Interface:
    450 ,,No storage
    451,,No side-info entry
    452,,TP-START failed
    453,,No initialization
    454,,"getlu" failed
    455,,"signal" failed
    456,,Timeout during conn. setup
    457,,CMALLC failed
    458,,CMSEND failed
    459,,Prepare-To-Receive failed
    460,,"mc_flush" failed
    461,,CMRCV failed
    462,,Argument missing
    463,,"get_allocate" failed
    464,,CMDEAL failed
    465,,TP-END failed
    466,,Max.no.of conv. reached
    467,,"snaopen" failed
    468,,"snactl" failed
    469,,No flush in IBM environment
    470,,"snaclse" failed
    471,,Status error
    472,,No side-info entry
    473,,No conversation
    474,,Connection closed manually
    475,,Connection closed automatically
    476,,No partner found
    477,,Confirm failed
    478,,Confirmed failed
    479,,GWHOST not in side-info entry
    480,,GWSERV not in side-info e.
    481,,PROTOCOL not in side-info entry
    482,,LU not in side-info e.
    483,,TP not in side-info entry
    484,,No conn.to gateway
    485,,gethostname failed
    486,,SAP_CMACCP not executed
    487,,Program not in argument list
    488,,Host not in argument list
    489,,Service not in argument list
    490,,Conv-ID not in argument list
    491,,Invalid parameter
    492,,LU62CVCT failed
    493,,LU62ATTCH failed
    494,,No CONV table
    495,,Incorrect conv.table
    496,,Invalid conv modification
    497,,NiHostToAddr failed
    498,,NiAddrToHost failed
    499,,Read operation tab.THOST failed
    500 ,,No side info file exists
    501 ,,CMRCV failed
    Technical details
    File
    Offset
    RecFm
    System log type
    Grp
    N
    variable message data
    6
    245700
    m
    Error (Function,Module,Row)
    R4
    9
    020223                                ThReceiCPIC-Erthxxhead7192

    Hi,
    It will be very difficult to solve without being on the customer site and having all information.
    Right now, the error code is network error...
    Kind regards,
    Yann

  • Problem During NWDS start up

    Hi all,
        I have installed Net weaver IDE in my system.Now i have started my IDE by clicking on the icon. It was shown me a Browse option to select workspace. I have selected default workspace. But it is giving me an error saying :
    Problem during startup and check the .log file in the .metadata directory of ur workspace.
    when i open the .log file it is showing the errors.....
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Aug 26, 2006 10:21:30.44
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: java.lang.reflect.InvocationTargetException
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Program Files\SAP\JDT\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1551)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1495)
         at java.lang.Runtime.loadLibrary0(Runtime.java:788)
         at java.lang.System.loadLibrary(System.java:834)
         at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
         at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
         at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
         at org.eclipse.swt.graphics.Device.init(Device.java:547)
         at org.eclipse.swt.widgets.Display.init(Display.java:1316)
         at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
         at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
         at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         ... 8 more
    !SESSION Aug 26, 2006 10:32:06.10 -
    java.version=1.4.2_12
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide C:\j2sdk1.4.2_12\bin\javaw.exe
    -Xmx512m
    -Xms128m
    -XX:PermSize=32m
    -XX:MaxPermSize=128m
    -DallUserDir='C:\Documents and Settings\All Users\Application Data'
    -cp C:\Program Files\SAP\JDT\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
    -os win32
    -ws win32
    -arch x86
    -feature com.sap.java.ide
    -showsplash C:\Program Files\SAP\JDT\eclipse\SapIde.exe -showsplash 600  -data C:\Documents and Settings\javadev0014\Documents\SAP\workspace -install file:C:/Program Files/SAP/JDT/eclipse/
    !ENTRY Startup 1 0 Aug 26, 2006 10:32:06.10
    !MESSAGE Sap NetWeaver Developer Studio - Build: 200503040130
    Sap Internal Installation
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Aug 26, 2006 10:32:10.885
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: java.lang.reflect.InvocationTargetException
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Program Files\SAP\JDT\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1551)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1495)
         at java.lang.Runtime.loadLibrary0(Runtime.java:788)
         at java.lang.System.loadLibrary(System.java:834)
         at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
         at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
         at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
         at org.eclipse.swt.graphics.Device.init(Device.java:547)
         at org.eclipse.swt.widgets.Display.init(Display.java:1316)
         at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
         at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
         at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         ... 8 more
    can anyone guide me in this issue.
    Thanks&Regards
        Kiran

    Hi
    Try to change the workspace and open it
    See this help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/55/434e782e2f294ba490eccbc0e5a6fc/frameset.htm
    Kind Regards
    Mukesh

  • Intermittent noisy line problem

    Hi.  Just about tearing my hair out over a line problem which has been giving trouble on & off for over 6 months.  The line becomes very noisy from time to time, depending on weather it seems.  We have had similar problems ever since moving here 13 years ago - the line runs overhead through woodland for about 4km to the exchange - and each time it is a corroded wire due to water penetration somewhere along the route.
    This time the engineer cannot locate the fault.  He agreed there was noise but the equipment he had could not locate where it was.  He advised calling another engineer when it was bad and hopefully he would be able to locate it.  However, I have just noticed that BT has charged me £127 for the visit, even though there was no suggestion that the fault lay with the internal wiring or equipment - heck, I even gave the guy a cuppa tea!
    Any advice on (a) getting the charge reversed and (b) getting the fault sorted.  Sometimes the line is so bad I have to resort to mobile, and the broadband speed can drop to a few hundred kbps.  Grrrrrr.
    Solved!
    Go to Solution.

    Try contacting the board mods
    At [email protected] with a link to this post and your bt account no and phone no they will reply within a few days and are great at sorting these sort of problems
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • CO-PA problem during Go-Live

    Hi experts,
    I have a problem during go-live related to posting to co-pa
    I have scheduling agreement. I don't want to post it in co-pa.
    I excluded my code for this order type (E), but when the user goes to create the scheduled lines, SAP posts to co-pa the document.
    I already implemented UE ZXKKEU11 and ZXKKEU03... I don't know if others must be implemented...
    Help me if possible urgently.
    Thanks.

    Thanks Sridhar for your reply.
    Only first note you mentioned could be help me. The others aren't related to my release. (ECC 6.03).
    According to you, why clearing co-pa structure (when data must not be posted) SAP posts however the scheduling agreement record?

  • Problems during NWDS startup

    I have installed Netweaver developer studio. When i tried to launch it , it gave me an error "Problem during start up". The log file show the following
    !SESSION Oct 22, 2004 18:26:15.579 -
    java.version=1.4.2_04
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments: -os win32 -ws win32 -arch x86 -install file:C:/Program Files/SAP/JDT/eclipse/
    !ENTRY org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Problems encountered loading the plug-in registry.
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.dtr.client.vfs" was disabled due to missing or disabled prerequisite plug-in "com.sap.ide.eclipse.ext.libs.iaik".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.dtr.client.eclipse" was disabled due to missing or disabled prerequisite plug-in "com.tssap.dtr.client.vfs".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.dii" was disabled due to missing or disabled prerequisite plug-in "com.tssap.dtr.client.eclipse".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.j2ee.model" was disabled due to missing or disabled prerequisite plug-in "com.tssap.dii".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.j2ee.viewmaps.java" was disabled due to missing or disabled prerequisite plug-in "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.library" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.tc.col" was disabled due to missing or disabled prerequisite plug-in "com.sap.mw.jco".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.external" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.sap.sld.client" to "com.tssap.dtr.client.vfs".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.sld.namealloc" was disabled due to missing or disabled prerequisite plug-in "com.sap.sld.client".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.sap.tc.build" to "com.tssap.dtr.client.vfs".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.tc.webdynpro.runtime" was disabled due to missing or disabled prerequisite plug-in "com.sap.ide.jcb.core".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.core.providers.dtr" to "com.tssap.dii".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.opensql" was disabled due to missing or disabled prerequisite plug-in "com.sap.exception".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.sqlj" was disabled due to missing or disabled prerequisite plug-in "com.sap.opensql".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.j2ee.ui.perspective" was disabled due to missing or disabled prerequisite plug-in "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.ejb" to "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.tc.security.https" was disabled due to missing or disabled prerequisite plug-in "com.sap.ide.eclipse.ext.libs.iaik".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.model.ext" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Plug-in "com.sap.tc.cmi" was disabled due to missing or disabled prerequisite plug-in "com.sap.dictionary.runtime".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.ejbjar" to "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.web" to "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.ear" to "com.tssap.j2ee.ui".
    !SESSION Oct 22, 2004 18:26:26.985 -
    java.version=1.4.2_04
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments: -os win32 -ws win32 -arch x86 -install file:C:/Program Files/SAP/JDT/eclipse/
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:26.996
    !MESSAGE Unable to find Action Set: com.sap.ide.help.actionSet
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:27.16
    !MESSAGE Unable to find Action Set: com.sap.ide.eclipse.component.provider.BuildActionSet
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:27.16
    !MESSAGE Unable to find Action Set: com.sap.ide.login.LoginActionSet
    !ENTRY org.eclipse.core.runtime 4 2 Oct 22, 2004 18:26:29.459
    !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.core.runtime".
    !STACK 0
    java.lang.NullPointerException
         at com.tssap.util.InstallationInfo.checkInstType(InstallationInfo.java:83)
         at com.tssap.util.InstallationInfo.getInstallationType(InstallationInfo.java:66)
         at com.tssap.util.UtilPlugin.startup(UtilPlugin.java:343)
         at org.eclipse.core.internal.plugins.PluginDescriptor$1.run(PluginDescriptor.java:736)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:748)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
         at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.access$0(DelegatingURLClassLoader.java:876)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegateLoader.loadClass(DelegatingURLClassLoader.java:90)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassPrerequisites(DelegatingURLClassLoader.java:554)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:890)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.tssap.config.ConfigPlugin.<clinit>(ConfigPlugin.java:17)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:722)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginDescriptor.getPlugin(PluginDescriptor.java:306)
         at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1325)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.ui.internal.Workbench$14.run(Workbench.java:1334)
         at java.lang.Thread.run(Unknown Source)
    !ENTRY org.eclipse.ui.workbench 4 2 Oct 22, 2004 18:26:29.479
    !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.ui.workbench".
    !STACK 0
    java.lang.ExceptionInInitializerError
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:722)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginDescriptor.getPlugin(PluginDescriptor.java:306)
         at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1325)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.ui.internal.Workbench$14.run(Workbench.java:1334)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegatingLoaderException: "Plug-in "com.tssap.util" activation failed while loading class "com.tssap.util.trace.TracingManager".
         at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:116)
         at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.access$0(DelegatingURLClassLoader.java:876)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegateLoader.loadClass(DelegatingURLClassLoader.java:90)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassPrerequisites(DelegatingURLClassLoader.java:554)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:890)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.tssap.config.ConfigPlugin.<clinit>(ConfigPlugin.java:17)
         ... 12 more
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:29.479
    !MESSAGE Unhandled Exception
    !ENTRY org.eclipse.ui 4 0 Oct 22, 2004 18:26:29.479
    !MESSAGE Unhandled Exception
    !STACK 0
    java.lang.ExceptionInInitializerError
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:722)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginDescriptor.getPlugin(PluginDescriptor.java:306)
         at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1325)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.ui.internal.Workbench$14.run(Workbench.java:1334)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegatingLoaderException: "Plug-in "com.tssap.util" activation failed while loading class "com.tssap.util.trace.TracingManager".
         at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:116)
         at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.access$0(DelegatingURLClassLoader.java:876)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegateLoader.loadClass(DelegatingURLClassLoader.java:90)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassPrerequisites(DelegatingURLClassLoader.java:554)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:890)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.tssap.config.ConfigPlugin.<clinit>(ConfigPlugin.java:17)
         ... 12 more
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Oct 22, 2004 18:47:19.256
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.core.launcher.Main.basicRun(Main.java:291)
         at org.eclipse.core.launcher.Main.run(Main.java:747)
         at org.eclipse.core.launcher.Main.main(Main.java:583)
    Caused by: java.lang.RuntimeException: Fatal Error: Unable to locate matching org.eclipse.core.runtime plug-in.
         at org.eclipse.core.internal.boot.PlatformConfiguration.locateDefaultPlugins(PlatformConfiguration.java:2264)
         at org.eclipse.core.internal.boot.PlatformConfiguration.<init>(PlatformConfiguration.java:903)
         at org.eclipse.core.internal.boot.PlatformConfiguration.startup(PlatformConfiguration.java:1368)
         at org.eclipse.core.internal.boot.InternalBootLoader.initialize(InternalBootLoader.java:582)
         at org.eclipse.core.internal.boot.InternalBootLoader.startup(InternalBootLoader.java:1035)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:838)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Oct 22, 2004 18:47:25.415
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.core.launcher.Main.basicRun(Main.java:291)
         at org.eclipse.core.launcher.Main.run(Main.java:747)
         at org.eclipse.core.launcher.Main.main(Main.java:583)
    Caused by: java.lang.RuntimeException: Fatal Error: Unable to locate matching org.eclipse.core.runtime plug-in.
         at org.eclipse.core.internal.boot.PlatformConfiguration.locateDefaultPlugins(PlatformConfiguration.java:2264)
         at org.eclipse.core.internal.boot.PlatformConfiguration.<init>(PlatformConfiguration.java:903)
         at org.eclipse.core.internal.boot.PlatformConfiguration.startup(PlatformConfiguration.java:1368)
         at org.eclipse.core.internal.boot.InternalBootLoader.initialize(InternalBootLoader.java:582)
         at org.eclipse.core.internal.boot.InternalBootLoader.startup(InternalBootLoader.java:1035)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:838)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    Any Idea? HOw to get rid of this problem?.

    I have figured out the problem. Some of the plugins were missing from the installation source. I copied the missing plugins from other installation and it worked.

  • "Program files" directory problem during Microsoft Office Customization Installer in non-English versions of Windows

    We have a document-level customization solution for Word and are experiencing problems during deployment in an environment running on terminal services. The OS (Windows 2012) is English and Word (2013) is non-English (German). 
    Installation is done into the "Program Files" folder correctly. But when trying to start a word document linked to the specific template. The "Microsoft Office Customization Installer" pops up with the error.
    "There was an error during installation"
    From: file:///C:/Programme/[CompanyName]/[Productname]/[Productname].vsto
    Downloading file:///c:/Programme/[CompanyName]/[Productname]/[Productname].vsto did not succeed.
    Exception: ....
    System.Deployment.Application.DeploymentDonwloadException: Download file:///C:/Programme/[Companyname]/Productname]/[Productname].vsto did not suceed. ---> System.Net.WebException: Could not find a part of the path 'C:\Programme\[Companyname]\[Productname]\[Productname].vsto'.
    ---> System.Net.WebException: ...... ---> System.IO.DirectoyNotFoundException......
    The problem seems to be that the installer is looking for C:\PROGRAMME instead of C:\PROGRAM FILES. C:\PROGAMME is the German localized name of PROGRAM FILES (http://en.wikipedia.org/wiki/Program_Files).
    The installer installs the solution correctly deployed into c:\program files, but when the later a user tries to start it and the Microsoft Office Customization Installer is called, it tries to access the non-existing "c:\programme" folder. This
    doesn't exist, because Windows is English.
    Is there any thing related to deploying solutions on a platform which has different languages (mixing/matching of OS language and Office language?)
    Thank you for your help

    Hello,
    1. First, I would confirm with you whether you dealt with the localization for your document-level add-in?
    2. Did you use this way to define the Create a class that defines the post-deployment action part of Put the document of a solution
    onto the end user's computer (document-level customizations only) and did you get the path with Environment.SpecialFolder enum?
    To handle this, I would recommend you consider using Environment.SpecialFolder to set that property.
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Problem During Installation of ECC 6 on Windows 2003

    <b><b>Here I am facing problem during Import ABAP Phase.
    It is throwing Error like that::
    CJS-30022 Program 'Migration Moitor' exists with return code 103.
    After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
    My Server is like that:
    OS: Windows Server 2003
    Hardware: HP Itanium IA64
    Database: Oracle 10.2g
    SAP Release : 2004s ECC 6
    I have configured Java with j2sdk 1.4.2_12:
    JRE 1.5 is not available for IA64 .
    I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
    Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
    What to do now.
    Please send me feed backs.
    Regards,
    Sumanta Chatterjee
    </b></b> <b></b>

    run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are).  You should see something like sap<something>.tsk and sap<something>.log.  Look at the most recently updated sap<something>.log file for the specific error.  One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space.  Also, make sure your SYSTEM tablespace has at least 500M.
    Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
    Rich

  • How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1

    How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1
    Thanks

    Icapper wrote:
    I will end up getting something other than Logitech speakers, since I'm just weird like that.
    Your not weird, your a audiophile.
    https://en.wikipedia.org/wiki/Audiophile
    Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
    The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
    Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
    $200 and it has a iPod dock and also takes like 8 batteries so it's portable.
    http://www.amazon.com/dp/B002GHBTNC
    There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
    http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
    The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

  • Line invoiced during a given period

    Hello Experts,
    Is there a different way than queries to know how many lines has been invoiced during a given period ? I tried with th drag and relate tool but icant select a period.
    Thanks for your help
    Sébastien TABORE

    Hi,
    There is no report as such to check for all the Lines Invoiced during a specific period.
    You can get best details which are required using the tables and preparing a query.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • EXIT to change / add line items during STO PO creation in T.Code ME21N

    Hi
    Can somebody suggest me a EXIT or a BADI  to change / add line items during STO PO creation in T.Code ME21N.
    The requirement is as below.
    When the user enters a material no ( which has a BOM created in CS01), and presses enter or saves the PO, i need to get the sub components of the BOM and populate them as the next line items.
    This is because the user needs to create the delivery with reference to the PO. In the delivery, the BOM material needs to be populated with all the sub components of the BOM.
    I tried to do it using EXIT_SAPMM06E_013 in which i am able to change / add the line items in the XEKPO and YEKPO internal tables. The entries are available in the internal table when the EXIT is executed.
    But when the PO is posted internally, the item is not changed/added.
    Thanks in advance.
    Guna.

    Hi,
    Try BADI "ME_PROCESS_PO_CUST".
    cheers,

Maybe you are looking for