Line profile does not match connection rate.
Hi,
We are 3 Km from our local exchange and our bt homehub router states that we are connected at 1.75mb:
Line state:
Connected
Connection time:
0 days, 00:17:41
Downstream:
1.75 Mbps
Upstream:
448 Kbps
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
6.4 dB / 16.0 dB
Line attenuation (Down/Up):
64.4 dB / 31.5 dB
Output power (Down/Up):
17.1 dBm / 12.4 dBm
FEC Events (Down/Up):
57 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
299 / 130
The bt speed test website gives the following results:
Download speedachieved during the test was - 1129 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1792 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1250 Kbps
Having done a bit of googling it looks as though our line profile should infact be 1500 Kbps given our connection rate of 1.75 Mb. Is it possible to get my line retrained so we can make the full use of our lines potential. That extra speed is crucial in been able to use Iplayer etc....
Thanks in advance.
Mark.
Thanks for your reply Jolly.
When I first activated the broadband I had the filter plugged into the front (centre) socket on the master socket and the line was connecting at approx 1.5 Mb. About two weeks ago I plugged the filter directly into the test socket and I got the increased connection rate as detailed above. I left the router on and everything connected for about 10 days but had no improvement in line profile. Could it be that my connection rate is so marginal on activating the 1.5 Mb line profile that the equipment at the exchange isn't detecting the increased (well kind of!) speed?
The reason I was only connected for 17 min before posting that message was because I decided to restart the router to confirm that I was still connecting at that rate.
I tried speaking to someone in Dehli about this but got absolutely nowhere........
Similar Messages
-
Line number does not match in opteron assembly
Hi,
I have made an assembly for one of my files on Opteron but the problem i face is the line numbers shown by it does not match my code.
I am getting a core in the same file and i am able to find the function name but the line numbers and offsets are not displayed in the assembly correctly.
So i am not able to find the line number where the problem is.
The following are the details:
bash > uname -a
SunOS sha-x86-view2 5.10 Generic_Patch i86pc i386 i86pc
and i have given -S -xs command line options while making assembly.
Can some one help me with that?Thanks for your reply Jolly.
When I first activated the broadband I had the filter plugged into the front (centre) socket on the master socket and the line was connecting at approx 1.5 Mb. About two weeks ago I plugged the filter directly into the test socket and I got the increased connection rate as detailed above. I left the router on and everything connected for about 10 days but had no improvement in line profile. Could it be that my connection rate is so marginal on activating the 1.5 Mb line profile that the equipment at the exchange isn't detecting the increased (well kind of!) speed?
The reason I was only connected for 17 min before posting that message was because I decided to restart the router to confirm that I was still connecting at that rate.
I tried speaking to someone in Dehli about this but got absolutely nowhere........ -
Audio sample rate does not match (HDcam to dvcam)
I'm trying to import clips and keep getting this message:
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
Footage was originally shot on HDCAM and transferred to DVCAM elsewhere. Using FCP 5, am importing via firewire from a Sony DSR-11 deck. Using DV NTSC 48kHz Anamorphic as capture settings (though I've tried everything that I thought might possibly work with no success). The audio does not seem to drift over the course of several 5 minute or so clips. Clip settings show audio at 48 kHz (don't know if that's from capture settings or from actual data). Seems to me all audio should be 48 kHz 16 bits, so can't figure out what's going on. I have to export an EDL for the project to be finished in HD. Read some similar threads that ended in December, seemingly without much resolution. My broader concern is why this is happening; my immediate concern is do I need to worry about this right now since the media files will need to be recaptured in HD anyway. Any thoughts?
ThanksA little more info. I'm having this problem on 4 tapes (from different cameras) that were transferred to DVCAM in a squished format to appear full screen on a 4x3 monitor. Video that was letterboxed and I can bring in with the standard DV NTSC capture settings does not have this problem. Still have the problem if I try to import the clips from the squished video with standard settings. Any thoughts?
-
Printer will not connect wireless WPA passphrase does not match.
My printer use to work wireless and now has stopped. The passphrase has not been changed, all other wireless computers, PS3 still work. I have re-entered the passphrase several times with same error. Diagnostics resulsts:
Attention The WPA security passphrase configured on your HP printer does not match your wireless router setting.
Solution 1 Run the wireless Setup Wizard to re-enter your wireless network WPA security passphrase.
DIAGNOSTICS RESULTS
>Wireless
- Wireless On PASS
- Wireless Working PASS
> Connectivity
- Connected Not run
- Disconnected count total 455
- Disconnected count (last Hour) 0
- Disconnected count ( last 24 hours) 0
> Network
- Network Name SSID found PASS
- other networks detected matching your networks name SSID NO
- Wireless networks detected 4
>Settings
- Printer Settings consistent with wireless router settings NOT RUN
- No filtering NOT RUN
- Channel NOT RUN
- Security FAIL
Current configuration
- Network Name (SSID) xxxxxxxx " the name given is correct"
- Hardware Address (MAC) xxxxxxxx
- ip address NOT APPLICABLE
- Configuration Source NOT APPLICABLE
-Communitcation Mode INFRASTRUCTURE
- Authentication Type WPA-PSK
- Encryption Automatic (AES or TKIP)
_ Internet Not applicable
I have tried several times to input the passphrase, i have reset defults on the modem, i have unpluged the modem. Nothing seems to work. Any ideas on how to fix this problem. Note: I am able to connect my computer straight to the printer wireless but unable to connect throught the modem. please help.....
the modem is a UBEE DDW366Temporarily remove and disable all security on the router. Now try to connect to your unsecured SSID. Are you successful? If yes, go back and add WPA2-AES with your password and try to connect again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Item does not match schdule line ( program error ) message no . V1427
*Item does not match schdule line ( program error ) message no . V1427 .* This is the message I am getting when I am trying to display a quotation through VA23 . From here system exits the transaction .
As per my observation , when I compared VBAP and VBEP tables, there are 2 items in VBEP table with schedule lines but the same items are not present in VBAP table. User says he tried to delete these items because there is no quanity , Inspite of that these items appear in VBEP table .
The document is a reservation document where in schedule line category does TOR and availability check.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 5.0 .
What is the best way as this doc has nearly 30 items and nearly all of them have quanity confirmed .
Please provide your valuble inputs ...
Regards
Raghav..Nitin,
Below are the steps to check
Transaction SE18
Definition name: BADI_SD_SALES
Menu: Implementation -> Overview
double-click on implementation: IM_CORE_CHECK
Now you will get an overview on the methods.
check whether implementation IM_CORE_CHECK is active or not.
If not Press the change button and activate
looking at the your system pack level this should be active. If it is active then the inconsistency must be modified directly at database level through Z report.
Ramesh -
Item does not match schedule line (program error)
Dear Experts,
I Transaction VA02/VA03 when i put Sales order number and try to get in to the system system through error and terminate the transaction
ERROR is "Item does not match schedule line (program error)" with Message no. V1427
when i check Table level and analyse thr Debuging i found that
Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
Question
Why and How it happen and how to fix this issue???
Best Regards
hanumantCheck Note 442831 - V1427: Item does not match schedule line (program error)
thanks
G. Lakshmipathi -
Item does not match schedule line (program error) in sap
Dear Expert.
Greetings!
We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
The error is occurring due inconsistency on the database tables, some Item is in table VBEP, but it is missing from table VBAP. This is what is causing the error message.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 6.0 .
Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
Bapi BAPI_SD_SALES is also active.
Please let me know if anybody has any idea on the same.
regards
PraveenHi,
Refer the KBA: 1464620 - Error V1427: Item does not match schedule line which explains the reason and the solution for the issue.
Regards,
AKPT -
How to avoid output file and error lines when condition does not match
Hi Experts
A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
Result Message in SAP B1 Control Center when CardCode does not match:
I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
Or - can lines in SAP B1 Control Center be automatic deleted?
Regards
SteenHi Steen,
using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
Following extract form the B1i help describes the usage to skip the outbound processing:
1.1 Skipping Outbound Processing
If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
Add the following to the final transformation atom (atom0):
<b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
info
To display an individual message, define it using the info attribute.
msglog
If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
msgout
To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
<xsl:template name="transform">
<xsl:attribute name="pltype">xml</xsl:attribute>
<xsl:choose>
<xsl:when test="$msg/BOM/BO/Documents/row/CardCode='C20000'">
<xsl:call-template name="transform2"/>
</xsl:when>
<xsl:otherwise>
<b1im_skip info="skipped" msglog="false"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Best regards
Bastian -
HRMS APP-PER-52803:Your business group does not match your security profile
I see this as a common problem, please guide me as to what should be done to rectify it.
While opening \Payroll\Description, it gives message as under:
HRMS APP-PER-52803:Your business group does not match your security profile
Regards
NemoHi,
I feel that "HR: Security Profile" option is not set properly, BZ of that screen is errors out.
Please check the following Profile Options
HR: Security Profile -- Enter the sec profile name which is business Group name
HR: Business Group -- Your Business Group Name
Note: If you set the HR: Security Profile optional first, then system will sets the HR: Business Group profile option too automatically.
I hope this will solves your problem.
thanks
Krishna Prasad Rapolu
Oracle HRMS Consultant. -
ORA-01861 literal does not match format string, ORA-02063preceding line fro
We have upgraded a client from 8.0.5 to 9.2.03. The following query is called from a report that was built using Cold Fusion5. It worked in 8.0.5, but not 9.2.03. When you run the report you get the errors
[Oracle][ODBC][Ora]ORA-01861: literal does not match format string ORA-02063: preceding line from FRPE
Here's the query:
SELECT x.acct, x.obj, x.offn, x.status, x.asofdate, max( decode( x.func_id, 1, t, null ) ) UOB, max( decode( x.func_id, 12, t, null ) ) COB, max( decode( x.func_id, 24, t, null ) ) Rate_Warning, max( decode( x.func_id, 2, t, null ) ) Sector_Change, max( decode( x.func_id, 2006, t, null) ) FRRFRD , max( decode( x.func_id, 2003, t, null ) ) No_Tcode , max( decode( x.func_id, 2004, t, null) ) No_Sector FROM ( SELECT a.acct, a.func_id, count(*) cnt, 'Fail' t, b.obj, b.offn, b.status,a.asofdate FROM frpfaud@FRPE a, frpair@FRPE b WHERE a.acct=b.acct AND a.asofdate='2008-02-29 00:00:00' AND b.bnk not like 'B%' and b.obj not in ('KL') and b.obj in ('GAF') GROUP BY a.acct, a.func_id,b.obj,b.offn,b.status,a.asofdate) x GROUP BY x.acct, x.obj,x.offn,x.status,x.asofdate
Now, this query will not work by running straight through SQL worksheet in either the 8.0.5 or 9.2.03 regions. So I guess it has something to do with Cold Fusion- which I know nothing about. Has anyone had any experience using Cold Fusion to issue a query? What would be the cause of the difference between the Oracle versions? That is the only thing that changed.
Thanks for any input.I actually want the date format of DD-MON-YY. Which, from what I understand, is the default format for both Oracle 8.0.5 and 9.2.03. I'm trying to figure out why it is now displaying as 'yyyy-mm-dd hh24:mi:ss'. I could convince the client that the code needs changing if I had evidence that this version of Oracle (9.2.03) used a different default date format. Or if Cold Fusion pulls the date differently. Ughh.
Here are the database parameters:
SQL> show parameter nls_date_format
NAME TYPE VALUE
nls_date_format string
select sysdate from dual;
SYSDATE
26-FEB-08
1 row selected.
select * from nls_session_parameters
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
17 rows selected.
select * from v$nls_parameters
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_CHARACTERSET WE8MSWIN1252
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
19 rows selected. -
Items does not match schedule line
Item does not match schedule line (program error) - message V1427 getting while accessing the Sales Order via VA02/VA03.
While we see in table VBAP we can see all the line items except the Item number 10 for the order. However, in the table VBEP, we see 5 line items for the Sales Order.
It is not allowing us to enter the Sales Order. Kindly help.
Thanks in advance.
Message was edited by:
Praveen KumarHello,
we've got the same problem.
Because of some changes in an SD-Userexit the problems have been generated.
In our case the SAP-notes can't help to solve the problem with VBAP/VBEP.
I wrote an report which check and delete the excessive positions of both tables.
Hope it helps. -
I am working with Final Cut Pro 10.1.4. I created a 30 second spot with a music bed. Comcast is rejecting the spot because the audio sampling rate does not match the actual audio values in the spot. They expected 48000 and my spot is 44100. This may be caused because I was forced to change the speed of the audio to work properly in the spot. The audio was sped up to 101%. First, is this what caused Comcast to reject and second, is there a way to restore the rate without slowing down the music bed?
Thanks!FFirst check your project properties. The default is 48K.
-
I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments -
[Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.
fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking. I've tried a few reinstalls and different xorg options so far, but had no luck.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Xorg.0.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mx518"
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4088
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xfde00000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
(II) fglrx(0): Year: 2006 Week: 33
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
(II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: F-419
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000523509449010000
(II) fglrx(0): 2110010380251e78e8e595a5584c9726
(II) fglrx(0): 1e5054bfef808180818a818c01010101
(II) fglrx(0): 010101010101bc34009851002a403070
(II) fglrx(0): 1300782d1100001ed60980a0205e6310
(II) fglrx(0): 10605208782d1100001a000000fd0032
(II) fglrx(0): 4b1e500e000a202020202020000000fc
(II) fglrx(0): 00462d3431390a2020202020202000ba
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 37 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (370, 300) mm
(--) fglrx(0): DPI set to (87, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
[1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
(II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
(II) fglrx(0): [drm] framebuffer handle = 0xb5000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
icon[0].start=0x505000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
icon[1].start=0x508000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) mx518: Device: "/dev/input/mice"
(**) mx518: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) mx518: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(==) mx518: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) mx518: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7"
(**) mx518: Buttons: 14
(**) Option "Resolution" "800"
(**) mx518: Resolution: 800
(II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) mx518: ps2EnableDataReporting: succeeded
xorg.conf:
Section "ServerLayout"
Identifier "Xorg"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "mx518" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "off" # Disable AIGLX
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
# Fonts
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "fglrx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Options
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
# Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mx518"
Driver "mouse"
# Options
Option "CorePointer"
Option "Resolution" "800"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "10"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AG Neovo"
ModelName "F-419"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
# Options
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
VendorName "All"
BoardName "All"
Driver "fglrx"
# Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "AGPMode" "8"
# Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "XEVIE" "Enable"
# Option "Composite" "Enable"
#Endsection
Would it be possible to explain the other warnings in Xorg.0.log? Rather curious about those apart from the obvious one, too.
Thanks.
Last edited by Newnux (2007-07-11 16:04:15)Indeed, that seems the end-all error of it all.
I'll summarise my warnings, some for curious reasons:
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Anyway, I wondered about versions and noticed this:
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
(II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
(II) fglrx(0): [drm] framebuffer handle = 0xbd000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
All versions previous to that show 8.38.6:
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
Now, quoting something I'd come across a few times and taking it from thinkwiki:
If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
Check out /var/log/Xorg.0.log for a message like:
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
Hint:
Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
How does this apply to Arch? I only found one instance of fglrx by using that method.
Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything. Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me. Surely others have updated their drivers too.
Last edited by Newnux (2007-07-11 13:28:55) -
I've completed an upgrade from Exchange 2003 to Exchange 2013 and I have one last SSL message that I can't get rid of. I've installed a 3rd party cert that is working great for webmail and cell phone access but for some reason the Outlook 2010/2013
clients get prompted for a security warning. I just implemented the SSL cert yesterday and I've noticed that new installs of Outlook seem to work just fine. My Outlook 2013 client doesn't prompt me with the message but I have other users who are
still getting the "The name of the security certificate is invalid or does not match the name of the site" error. The domain on the cert error show up as server.mydomain.local. I've gone through all the virtual directories and pointed
all of my internal and external URL's to https://mail.mydomain.com. This made one of the two warnings go away but not the second. I've dug around on google and gone through everything I could find here and as far as I can tell my internal
and external url's are configured properly and I can't figure out where this error is originating from. Any ideas on where I should look outside of the virtual directories?
I'm including a good link I found that contains all of the virtual directories I updated. I've checked them through both CLI and GUI and everything looks good.
http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
http://jaworskiblog.com/2013/04/13/setting-internal-and-external-urls-in-exchange-2013/Hi,
When the Outlook connect to Exchange 2013/Exchange 2010, the client would connect to Autodiscover service to retrieve Exchange service automatically from server side. This feature is not available in Exchange 2003 Outlook profile.
Generally, when mailbox is moved to Exchange 2013, the Outlook would connect to server to automatically update these information. It needs time to detect and update the changes in server side. I suggest we can do the following setting For autodiscover service:
Get-ClientAccessServer | Set-ClientAccessServer –AutodiscoverServiceInternalUri https://mail.mydomain.com/autodiscover/autodiscover.xml
Please restart IIS service by running IISReset in a Command Prompt window after all configuraions.
Regards,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Video playing issue - Green Band on top of the screen
I am getting this type of green band repeatedly on YouTube video's in IE 9 on Windows 7 64 bit if Nvidia is engaged. Not with the Intel graphics. I have removed Flash but it won't play or display therefore it using Flash 64bit is installed. I was not
-
Itunes showing unknown error (-208)
itunes showing unknown error (-208) whenever I try to play anything. Any ideas? Self Designed Mix Windows XP Pro Amd cpu Self Designed Mix Windows XP Pro Amd cpu
-
Does iPhoto 6 support RAW files?
Seems that some of my RAW images are not importing into iPhoto 6. They are taken with the Panasonic Lumix L1 SLR. So question is whether or not iPhoto supports RAW files, and is it specific to the camera model which might have its own proprietary RAW
-
String Substitutions with PL/SQL Function
Hello, i user APEX 4.2.1.00.08 in Database 11g I new in apex and a try to use String Substitutions. When I define a String like CONST with static value like '999' in Edit Applications Definition it's work fine. But I need to define the same String 'C
-
Why is the latest ISO7 not holding new notes?
I have update my iPad and the new operating system is not saving the notes I now wish to add as new, I can update existing notes and they save?