Line Profile "low" - What does that mean?

Upgraded to HSI Enhanced 7-15 Mbps from HSI 3 Mbps last week. 
Using newly supplied Dlink 2750B that replaced my older ActiontechGT704WG.
Now speed is very very erratic, from 1 Mbps to 2 to 1 to 5 to 3 to 2,  It's all over the place and nowhere near 7-15 Mbps. 
Online agent ran test and said line profile was very low.   I have new outside line from pole to nid 3 years old, new nid, and homerun to modem/router. 
I live a half mile from CO.
What could cause low line profile? 
I can't locate transceiver stats on this modem.
Thanks!

I don't believe any of us have managed to get Transceiver statistics from the D-Link modems yet but I'm sure it will be figured out eventually. If I had one I'd take a look at it.
If you have your old ActionTec modem sitting around still, hook it back up and let it sync. You should be able to pull the Transceiver Statistics from it. Should be a simple matter of visiting http://192.168.1.1/ , logging in using one of the default passwords below or one you set, and then clicking on the Status Tab at the top of the page, and if need be DSL Status.
admin/password
admin/password1
admin/admin
admin/admin1
Verizon Username and Password
I don't know what the Verizon In-Home Agent means by low Line Profile. It could be possible it's mentioning the sync rate of the line is low for the package or the noise margin is low?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

  • Copper line fault? What does that mean?!

    My broadband is not working too well....my wifi even worse....essentially it drops every so often despite the router being new. I used the online BT chat help and they did a test where I had to plug the phone line into the test socket inside the main socket.
    The test showed that we have a copper line fault.  He could not be sure if this was inside or outside the house, and if inside would cost a considerable amount should we opt to get a BT engineer round.
    we are BT phone and broadband customers.
    What does the copper line fault mean?  How might I discover if it is an internal issue before I get an engineer in please?

    any repairs to your extensions are your responsibility as you have connected a phone to the test socket and the fault was still there there will be no charge the £100 you were warned of is if the fault was with your extensions then a charge is made but you have eliminated that by your tests they will only fix internal problems if you pay them for it
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How do I back up the music and apps etc. I restored my computer and I reinstalled iTunes, I was told something about a terminal command line, what does that mean? Please help

    How do I back up the music and apps etc. I restored my computer and I reinstalled iTunes, I was told something about a terminal command line, what does that mean? Please help

    - Transfer iTunes purchases to the computer by:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    - Transfer any other music by using a third-party program like one of those discussed here:
    Copy music
    - Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup. The restore will also update the iOS.
    Note that the backup that iTunes makes does not include synced media like apps and music
    Are you sure you have a 3G iPod? A 1G iPod can only go to iOS 3.1.3
    See:
    Identifying iPod models

  • What is the provisioning feature in the settings under, general profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3

    What is the provisioning feature in the settings under, general>profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3

    A profile is used on iOS device to add specific settings and similar things to an iOS device.  Tryically, they are added when the iOS devices is controlled by a company or school.
    However, some apps install a profile. If your iPod is not controlled by a company or school then it seems an app added the profile. You can good the title if the profile and see if that gives any info.

  • Iphone 4S showed a message "low on resources" wth! what does that mean, never did that until this lastest upgrade of ios?

    iphone 4S showed a message "low on resources" wth! what does that mean, never did that until this lastest upgrade of ios?

    Double tap home button and then at the bottom of the screen it shows what's apps you have open. Hold finger on one of those apps till they wiggle and then tap on the X for just those apps at the very bottom of the screen. This closes them but does not delete them. See if that helps

  • HT4060 My ipad has been charging most of the morning but its still saying low power...what does that mean?

    I've been charging my ipad most of the morning but its still saying low power...what does that mean?

    iPad Charging
    "The fastest way to charge your iPad is with the included USB Power Adapter.
    iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
    When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

  • Keychain password what does that mean?

    keychain password what does that mean?

    Keychain is an Apple technology dating back to OS9 that saves commonly-used passwords for web sites, your email, etc. It matches the web site or applcaiotn to waht's stord and reloads the password to save re-entering it all the time.
    What are you doing when the computer asks for a keychain password? Usually you can access the Keychain Utility's stored info using your administrative password.
    It would help if we knew your Mac OS version. "iOS 6.1.2" in your profile is not a computer OS, but used only for iDevices. Doing "About this Mac" from your Apple menu wil show your actual Mac OS version. Once you have it, you should change your profile to match that--it will get you faster help for future questions.
    If you let us know the OS version, we can get you moved to the forum for that version, where you should get faster help with Keychain issues. This forum--although it's hard to tell from the unfortunate choice of labels--is for iMacs made before 2006 and doesn;t get as much traffice as forums for newer Mac models.

  • Error : 'no cached images'. What does that mean ?

    I try to import some images in Rapidweaver. But in the previewmode I get this errormessage :
    Error exporting image thumbnail for 'name photoalbum' (no cached image) What does that means ?

    Hi
    Error -50 paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    The "com.apple.iMovie.plist" file
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    Yours Bengt W

  • I get 3 beeps when I turn on my mini ipod what does that mean?

    I have a mini ipod and I am getting 3 beeps when I turn it on what does that mean as I cannot get any music?

    This is an iPod mini ("mini iPod"), or the iPod shuffle shown in your profile info?
    You may need to do a Restore on the iPod in iTunes.

  • Sorry but i'm lost. i have a JavaScript erorr - line number 1 what does this mean and how do i fix it?

    PLEASE HELP!!!!!  This site is not user friendly and I need help. I get a error message that read JavaScript error.... Line number 1, what does this mean and how do I fix it?

    This indicates that the web site and your web browser are not fully compatible. Is the machine a Mac or a PC? Which web browser (name/version) are you using? Have you tried another browser?
    Jan

  • HT3728 My tall time capsule light is flashing orange. What does that mean? and what do I do?

    HI, my tall time capsule is flashing orange. What does that mean? And how do i correct it to be green?

    Click the Finder icon on the dock at the lower left of your Mac's screen, then open Applications > Utilities > AirPort Utility
    Click directly on the Time Capsule picture
    If you see an Update button, click it
    Otherwise, click on the small amber icon and a message will appear to tell you why the amber light is flashing

  • HT2186 I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

    I just bought an iMac, while setting it up I was prompted to update the OS software. I tried to update it. It won't complete the update, and says "Error- requested timed out. (102) what does that mean? how do I fix it?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • The build code for my macbook is 10K549.  WHAT DOES THAT MEAN?

    The build code for my macbook is 10K549.  WHAT DOES THAT MEAN?

    Open System Profiler in the Utilities folder. Note the two digits for the Model Identifier displayed in the main panel. Compare with:
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

    Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

Maybe you are looking for

  • Idoc not received in receiver , sender shows successful in WE02

    Hello, I am sending Vendor from Production to Quality , sender system shows in WE02, idoc status as sucessful. I have checked all ALE settings and they are perfectly fine. But in receving system I am not able to receive it. In sender , transaction SM

  • Error while deploying composite - no partitions found

    Hi - I am trying to deploy a composite using the right click , deploy option. ( SOA Suite 11g R1 ) After selecting the application server, I am getting the error - no partitions found . Any clues how we can create the partitions or what is the workar

  • How to i authorize my computer to play music on itunes?

    I reinstalled itunes onto my new computer. It will not let me play any of my music because i have to "authorize" my computer. How in the world do i do that?

  • Data packets in abap proxy

    Hi I am sending a data from R/3 to XI using abap proxy. Here if the data packets are waiting in the queue for some time am getting an error " Time Limit Exceeded" and user is cancelling the job for processing in R/3 pls advice me how do i find the qu

  • How to upgrade hard drive without resinstalling Mac OS X

    Hello everyone. I have a MacBook Pro 17'' with the original 160GB HD but now I want to upgrade my hard drive to a Seagate 500GB. My question is, how can I upgrade the HD without reinstalling and setting up all my stuff again? Can this be done with Ti