Line reported repaired, but still phone is unusabl...

I've waited (a few days to be honest) after my landline was diagnosed as being faulty. Now that it is reportedly back, the problem persists, viz. that people contacting me hear handset ring, but I don't. When I pick it up to make a call a number of rings start up but the process finishes early.
Would i be right to infer that I need a new 'phone. The present phone - BT Freestyle 7110 - is now perhaps obsolescent.
My issue is whether to risk buying a new phone that I did not need, because my problem has not really been resolved.

Even better than borrowing a phone, nip down to your local Argos and get a corded one for less than a fiver. Apart from being able to test your line, you'll be pleased to have it the next time you want to make a call, or someone calls you, during a power cut.
You can click the white star next to this message if you think it was helpful.

Similar Messages

Nokia Connectivity Cable Driver repaired but still...

Hey there, I had moved messages stored in the phone to PC via Nokia Suite before, however I got a nokia connectivity problem so nokia suite cannot detect my phone/search it via bluetooth now. I tried to fix it by using the method of repairing ‘Nokia Connectivity Cable Driver’ but it doesn't work. Everything went smoothly but still nokia suite cannot detect anything. So I may need to reinstall the whole nokia suite but the main concern is that if I reinstall my nokia suite, the SMSs stored in the Nokia suite will lose is it? So may i know what I can do?
Phone: Nokia 5800 XpressMusic
Version of Nokia Suite: 3.8.48 (should be the latest)
Computer: Windows 7
Thanks.

Thanks however, the problem is that Nokia Suite cannot detect my phone so how can it copy the text to the clipborad?

Sales order we have made schedule line category catCN but still reqt coming

Dear Sir,
Sub : For sales order 5000060 line 10 we have made schedule line category as CN but still system is giving requirement against this order (while running MRP T code MD50)
Details:
One user has made one FG material delivery with PGI without putting the picking quantity. He had put zero picking qty. When we click PGI button System does not allow to do PGI without putting the picking qty but how he could do it we do not know. Now there is no goods issue material document instead one confirmation of service document is there in doc flow .we can not open this document. if we click display by selecting this document in document flow system gives error - NO document created for confirm service/cancel transaction
All the delivery fields are gray out. Delivery qty is there in this delivery hence at sale order schedule line tab against the schedule line system is showing delivered qty -2.
Goods movements status is B- partially completed.
Also system is not allowing to reverse the delivery- it is saying-no data available for this selection criteria. Hence we are not able to do delivery against this item. Hence we have created sale order line item 20 & transferred this stock to line item 20 & did subsequent transactions.
Now system giving requirement for line item 10 .We have made schedule line category CN still system is giving requirement against delivery number in T code -MD 50 against sale order line item- there is customer order ,delivery, production order .delivery number never comes in MD50 .it is giving requirement against delivery.
Kindly let us know how to stop the requirement to generate from this sale order line item
Also kindly let us know how user could make this & how this might have happened & how to restrict this in future.
Regards

Dear Sir,
When we create a sale order default sch line category is CN after few days (there is a specific reason) we change it to CP & run MRP
In this case we made the product by doing this but while doing delivery .user did some mistake & did PGI without picking qty in delivery.Now this qty is in delivery but there is no material document that stock has not yet moved .Since there was a problem in the delivery we have trasfered this stock to sale order line item 20.& did further transactions.
Afte this we did schedule line cat from CP to CN
But in MD50 system is giving the requirment against sale order ,delivery
Regards

Customer line item cleared but still it shows open item in FBL5N

Hi,
We have cleared one customer open item.
Posting date of Invoice is 08/12/2010 and
Posting date of Incoming payment is 10/12/2010.
But in FBL5N system still it shows the same cleared line as open item even though it is showing cleared document in the same line item.
With Regards
Ravi

Hi,
1)Check the Key date
2)Check if it was a partial clearing or not
3)Check if there are another open items inside the customer invoice, (e.g. 1 payment for several invoices or 1 invoices with mutli line items and contains different payment)
Hope this help
BR,
Jacky

Files disappeared after running disk utility disk repair but still space still remains. how do i recover the files?

stupidly repaired my external hard disk without backing it up via mavericks's disk utility repair option.
After the repair, all my folders disappeared but at the same time I noticed that the disk space still remained the same. Is there anyway to get these files back? My thesis is on it.

General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

MacBook "repaired" but still having overheating issues? Help needed

I just got my 13" MacBook Pro back from being repaired (apple replaced the display and the logic board), and now it is running at 83 degrees C (according to iStat Pro) and the fans are only at 2000rpm. Is that normal? My computer never used to be this hot. I can't even hear the fans running.
Thanks
PS Can I still call apple free of charge for technical support questions after the 90 day period if I don't have Apple Care (I am within the one year warranty)?

I am only web browsing, and I am holding it on my lap, though my knees are supporting the edges and there is nothign but air underneath of the machine, so the fan air exit is not being blocked.

Told laptop has been repaired but still not arrived back

I sent my g505s laptop off to germay on 4/2/15, as it was not powering on either through battery or mains.
DPD collected on 4th feb and after a couple of weeks i rang customer service to be advised that it was dispatched from germanys repair centre on 16th feb and they would send an email to dpd germay and if they could not find it i would get a new laptop.
I left it a week and rang again this time to be told that they would need to regenerate a dispatch code.
Left it again a week and still not recieved laptop back, so rang back to be told that they was unable to deliver even do i have not recieved a card through the door to notify me of failed delivery, and they would regenerate another delivery code and send it me via email so i could track it (not recieved).
its now been over 40 days since i sent it off for repair and dont seem to be getting anywhere with customer service has any one got any advice.

Hi crimsonsoul, welcome to the forums,
even when its not under the happiest of circumstances. If you would like to send me your details; name, phone, system s/n and email address by private message, see the envelope at the top of the boards, I'll see if I can find out some more about this situation.
Thanks in advance
Andy
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество

The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk. Have tried disk utility to repair but still not working.

My time machine backup has failed for the last couple of days. Im getting the message saying," error. this may be temporary, if the problem persists, go to disc utility to repair the problem."
I have done the first aid in the disc utility and still not repaired. Do I erase the disc, as it says????

1. Reboot the TC alone.. Just pull out the power cord.. count to 10 and plug it back in.
If TM still cannot find the disk..
2. Do a full network reboot.. everything off.. restart in correct order.. modem.. wait 2min.. TC wait 2min.. then all the clients..
If TM still cannot find the disk..
3. Factory reset the TC and do a fresh configuration. The TC is known to occasionally throw a wobbly and spontaneously forget its name.. part of old age.. (2years is starting towards old age for a TC).
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
If TM still cannot find the disk..
4. Wipe the old backup.. and start afresh.. this sometimes also happens.
You can try a verify of the disk. See A5 here.
http://pondini.org/TM/Troubleshooting.html
Sometimes a clean fresh TM backup is the only way.
Good luck.

I have crash reporting disabled but still get the popup every time - how can I suppress crash reporting altogether?

Win7/FF31
Thanks,
CC

The crash report does two things.
1) tells you Firefox crashed
2) files a crash report with the '''Mozilla.org''' system so that
someone can look over the report to find a reason and cure.
'''No Personal Information Is Included.'''
We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

I downloaded the new Safari 5.05 along with latest Snow Leopard and now my hotmail account causes my Safari and Firefox to crash suddenly. I tried repairing but still getting the same results. Please help...

Problem report for Safari reads: Safari quit unexpectedly while using the coreclr plugin.

Go to /Library/Internet Plug-Ins. If you see the Silverlight.plugin, move it to the Trash.
Now click your Apple icon (top left in your screen) then click Software Update to make sure all your software is up to date.
Restart your Mac if any updates were installed.
Try Safari / Hotmail.
If Safari crashes again, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

I am missing masters in aperture , getting an yellow exclamation mark , but still getting a preview of those pics .how to create a master .i have done rebuilding , repair , but still same?..please help

missing masters in aperture , getting an yellow exclamation mark ,

Q: Is there a way to place an image at 100% without having to do that extra resizing step?
I think here you want your images to fit in the full page size frame automatically. For this you can try the follwoing steps:
1. Create a new doc
2. Goto Object menu and choose Frame fitting options
3. Select Autofit and from Fitting drowdown, select "Fit content to frame". Refer the screenshot below:
After this you images should automatically fit in the entire page placeholder frames. Please let me know if this does not work or if the problem you are facing is different and I did not understand your problem correctly.
Regards,
Pooja

U400, repaired but still keeps crashing

I just got back my U400 from the service depot after it had started shutting down all of a sudden and it just did it again a couple of minutes ago.....now what do i do.....who do I talk to, clearly the people at the service centre did not fix it and I am fed of this, this laptop has spent more time in transit and at the service centre than I have used it. How do I return it, I dont want it anymore.

Hi All
you may like to use this tutorial
to determine what causes the BSoD'S
that will make it easier to deal with the problem
http://www.howtogeek.com/howto/6292/how-to-troubleshoot-the-blue-screen-of-death/

SALES ORDER LINE IS CANCELLED BUT DELIVERY DETAIL IS SHOING AS BACKORDERED

SALES ORDER LINE IS CANCELLED BUT still the DELIVERY DETAIL IS showing as BACKORDERED it should be in cancelled
status.The Sales order (only one ex:3904854) is cancelled , however order in shipping transactions screen indicates order is on backorder.
at that time of order cancellation the line level workflow error out due to the Workflow package is inactive .
I tried to resubmit the error out workflow using retry option from the responsibility “Workflow Administrator” the workflow is completed with forcible option but still the delivery detail is in back order status not changing it to cancel status.
Error Name :-4068 [Error Process Error: WF Error Message: ORA-04068: existing state of packages has been discarded
          ORA-04061: existing state of package body "APPS.XRX_SUPPLIES_NEW_WF_PKG" has been invalidated
          ORA-04065: not executed, altered or dropped package body "APPS.XRX_SUPPLIES_NEW_WF_PKG"
          ORA-06508: PL/SQL: could not find program unit being called: "APPS.XRX_SUPPLIES_NEW_WF_PKG" [Error Process           Error: 3114: Activity 'WFERROR/R_ERROR_RETRY' is not a process.]
Error Stack: Wf_Engine_Util.Function_Call(XRX_SUPPLIES_NEW_WF_PKG.XRX_CLOSE_LINE_DETAILS, OEOL, 55098479, 195982, RUN)
[Error Process Error:   Wf_Engine.CreateProcess(WFERROR, WF5147218, R_ERROR_RETRY) ]

Mohan
You need a simple script to get the status corrected. Log an SR or search metalink for the script. I am sure there is one out there (if you search with the orphan reservations). This script supported, but not exactly targeted at your problem But it will solve it. You can log an SR and confirm.
Thanks
Nagamohan

Restrict Form & Reports Pages but allow users to Save their Records

Hi
I have a database with Forms & editable Reports pages.
I have also created a table with certain 'Admin Levels' of access so that users with the 'ADMIN_LEVEL' = 1 cannot access the editable reports pages.
I find that applying the below restriction stops those users from accessing the reports but also won't allow those users to save any records.
select USER_ID
from USERS
where USER_ID=:APP_USER
and ADMIN_LEVEL > 1
I then thought I could create a new page of the report but make it uneditable & use the 'Create' button to save the record to the table, but this doesn't work.
My question is, how can I restrict access to a reports page but still allow records from restricted users to be saved?
Thanks

Hi,
Firstly, you should look into Authorization Schemes: [http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/sec.htm#BABCAGAB]
I would suggest you create a scheme to identify admin users called, say, ADMIN_USER. This could be an EXISTS SQL query scheme of something like:
SELECT 1
FROM USERS
WHERE UPPER(USER_ID) = UPPER(v('APP_USER'))
AND ADMIN_LEVEL = 1Then, on any item within your application, you have an Authorization Scheme setting. You can then set this to either "ADMIN_USER" or "{not}ADMIN_USER" to determine which user can have access to that item. "{not}ADMIN_USER" is any user where the above query would return no records.
Using this, you could grant access to a page, but stop access to a button and/or process. You don't, for example, have to set a scheme for the page itself (you can leave the setting as "- No Authorization Required -", so everyone can get to the page), but you can then set a Scheme for a button on that page. If the user is an ADMIN_USER and you have set a button for {not}ADMIN_USER, that user won't get the button on the page (you should also make the same setting on any process that this button triggers).
But, if you set the page's Scheme to {not}ADMIN_USER, any ADMIN_USER will not even be able to get to the page.
Andy

Why firefox always crash lately...so boring...already used latest update.. but still crash...

what problems with firefox latetly?
always being crash out...
so boring ...
always sent the crash report..
but still no action..
damn... for so long time used this web browser...
at the end.. so hatefull to tell if its always being crash all the time..
will not using it anymore or ask ppl to used it.
yesterday 4 time crash out

all those '''report''' sent to '''Mozilla'''..but still get '''crashes'''! its really '''annoying'''...
even i used latest updated from '''Mozilla''' and '''flash''', also follows all '''instruction'''.. still getting that '''annoying crash''' !

Line reported repaired, but still phone is unusabl...

Similar Messages

Maybe you are looking for