Line Resource Error when transfering IPPE Model to APO

Hi experts,
I'm using the CIF to transfer my IPPE model from ECC to APO.
Almost everything passes without a problem, but I get this message when it tries to create the Line Resource in APO.
Error when creating a line resource (proxy object)
Message no. PPEFLO123
As anyone ever encounter this problem ... I can't seem to find anything on the web, in OSS or in here.
Thanks.

Hi Senthil,
The first one gives me a short dump :
Short text of error message:
Transaction PPECIF01 is no longer valid
The second one says a bunch of items are only in the source system, but that's normal since the CIF dumps.
Edit : Well, the weird thing is the report seems to think nothing is created in APO, but I have almost everything created except lines and their relations.
Edited by: Marc Laberge on Jun 29, 2010 2:53 PM

Similar Messages

"Shared Resources error" when trying to install Photoshop Elements 11

I keep getting installation error "Shared Resources error" when trying to install Photoshop Elements 11 (Windows 7). Any advice will be appreciated..

Welcome to the forum, Ted,
Here's an older "Shared Technologies" thread: http://forums.adobe.com/message/3155897#3155897
But, I am not sure that we were ever able to help the OP, and they never reported back with the responses from Adobe. Still, might be a tip that is useful.
Good luck,
Hunt
[Edit] I mis-spoke. The OP and another user with the same error WERE helped. What I saw initially was yet another poster, who was going to contact Adobe, but never came back to the thread. In the case of the OP and another users, the issue was caused by having Adobe Bridge, included with other Adobe programs, like Photoshop and Premiere Pro, running. When they killed that, the installation went well.
Message was edited by: Bill Hunt

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

Getting Error when creating Data Model off OBIEE Analysis

Hi,
Our BI Publisher is integrated with OBIEE. I am developing BI Publisher report from existing obiee analysis. I am getting error when selecting existing analysis for data Set. Following error gets appear when pressing ok after selecting BI analysis
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xml.parser.v2.XMLParseException: '=' missing in attribute.
I have done some debugging and it seems error is appearing due to presence of dimensional hierarchy in the analysis. If I remove dimensional hierarchy column from the analysis, this error goes away and I am able to save data model and gather sample XML.
Any idea how to handle dimensional hierarchy column in BI Publisher data set?
Thanks & Regards

Hi,
I got this response from Oracle
“Sorry, this is not supported. If the BIEE Analysis has hierarchy columns then BIP cannot use it as a datasource.”

Java Error When opening ER Model in Jdev 11g release 2

Dear All,
I m getting below error when opening my ER model in jDev
java.lang.IllegalArgumentException: Ref is null
     at oracle.modeler.dif.ModelerGraphicBridge.findBridgeFromRef(ModelerGraphicBridge.java:343)
     at oracle.modeler.dif.ModelerGraphicBridge.createEdgeGraphic(ModelerGraphicBridge.java:267)
     at oracle.modeler.dif.ModelerGraphicBridge.createEdgeGraphic(ModelerGraphicBridge.java:86)
     at oracle.diagram.dif.GraphEdge.createGraphic(GraphEdge.java:152)
     at oracle.diagram.dif.GraphElement.createContainedGraphics(GraphElement.java:213)
     at oracle.modeler.shape.config.DefaultDiagramGraphicBridge.createDiagramGraphic(DefaultDiagramGraphicBridge.java:122)
     at oracle.modeler.dif.ModelerGraphicBridge.createDiagramGraphic(ModelerGraphicBridge.java:250)
     at oracle.modeler.dif.ModelerGraphicBridge.createDiagramGraphic(ModelerGraphicBridge.java:86)
     at oracle.diagram.dif.Diagram.createGraphic(Diagram.java:152)
     at oracle.diagram.dif.Diagram.createGraphic(Diagram.java:141)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:426)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:367)
     at oracle.modeler.addin.ModelerNode.findOrCreateManager(ModelerNode.java:252)
     at oracle.modeler.addin.ModelerDiagram.findOrCreateGraphSystemFromContext(ModelerDiagram.java:358)
     at oracle.diagram.framework.editor.CommonDiagram.open(CommonDiagram.java:231)
     at oracle.modeler.addin.ModelerDiagram.open(ModelerDiagram.java:111)
     at oracle.diagram.framework.editor.IdeDiagramEditor.openDiagram(IdeDiagramEditor.java:323)
     at oracle.diagram.framework.editor.IdeDiagramEditor.openImpl(IdeDiagramEditor.java:273)
     at oracle.modeler.addin.ModelerEditor.openImpl(ModelerEditor.java:79)
     at oracle.ide.editor.AsynchronousEditor.contextAvailable(AsynchronousEditor.java:427)
     at oracle.ide.editor.AsynchronousEditor.updateContextImpl(AsynchronousEditor.java:411)
     at oracle.ide.editor.AsynchronousEditor.setDelayedContext(AsynchronousEditor.java:395)
     at oracle.ide.editor.AsynchronousEditor$3$1.run(AsynchronousEditor.java:362)
     at oracle.bali.ewt.util.PaintUtils.invokeAfterRepaint(PaintUtils.java:53)
     at oracle.javatools.util.SwingUtils.invokeAfterRepaint(SwingUtils.java:607)
     at oracle.ide.editor.AsynchronousEditor$7.run(AsynchronousEditor.java:563)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
     at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
     at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks

User,
As you did not give any other information other then the stack trace it's heard to help. Does this error show a dialog box which asks you if want to save your work and exit or save and continue?
Where was the ER diagram created?
Timo
Edited by: Timo Hahn on 20.05.2012 17:10

Portal runtime error when execute a model deployed

Hy, i have this problem: when execute my model on the portal i receive this error:
Portal Error run-time
Error request processing for :
iView : N/A
Component : N/A
Component com.myComp.myProduct.29H.Analisi_agenti_2.AAD29H : JSP file name missing. Please check you profile..
Exception id: 10:54_29/01/08_0009_3388450
See the details for the exception ID in the log file
Thank's a lot.
Sincerely yours
Andrea Maraviglia

Hi Andrea,
Please check your portal runtime server is running or not. (Management Console)
I have experienced the same error , when our portal runtime server was stopped. I just restarted it. and problem solved.
Let me know if you have further problem.
Thanks,
Prashant
(Do reward points for helpful answer)

Error -8006: "Resource error" when connecting to DI

Hi all
Have anyone come accross this error before when trying to connect to the DI? The error message is not very descriptive as you can see: "Resource error"
Any help or suggestions would be appreciated
Regards
Marais

Hi Marais,
Is your problem solved as it is marked as solved. In any case here's a recent post I made regarding this. This is how I solved it:
This is an issue with the DI that will not be fixed if you only uninstall and reinstall the DI. It's other files that's involved too.
1) uninstall DI Server, Server tools, SDK.
2) delete the SM_OBS_DLL directory (in your temp directory c:\documents and settings\"user"\local settings\temp (check show folders and files on options))
3) reinstall DI Server, Server tools, SDK.
Hope it helps,
Adele
PS: I also see that there is a SM_OBS_DLL folder in your c:\windows\temp folder that you might also want to get rid of.

Parameter Error when Transferring Files from ipod to laptop

Hi,
I have posted this topic previously but didnt respond fast enough and I think the system locked it down as I had too long of a delay.
I have recently set up iTunes on a laptop and want to start using this as my default iTunes for syncing etc. Unfortunately I no longer have access to the desktop that housed my original iTunes so I have followed the instructions to use my ipod as an external disc and transfer the files this way.
These are the instructions I have followed http://lifehacker.com/105256/how-to-copy-songs-from-your-ipod-to-your-pc
There are two issues I see. (1) the ipod control folder is allowing me to see what is housed in the folder but it is slightly greyed out compared to the other folders in the same location.
(2) when I try and copy the music folder to my desktop etc I get a parameter error.
So for example the error I have when transferring to my desktop I get
"Cannot copy OUTO (the file): The parameter is incorrect.
Hopefully someone has seen this before.
thx

No idea on your specific question but if it is of any help here are some articles and links about moving files from the ipod to the computer...
Copying from iPod to Computer threads...
http://discussions.apple.com/thread.jspa?threadID=1300144
http://discussions.apple.com/thread.jspa?messageID=797432&#797432
http://discussions.apple.com/thread.jspa?threadID=809624&tstart=0
Also these somewhat dated but still useful internet articles...
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
http://www.engadget.com/2004/11/02/how-to-get-music-off-your-ipod/
http://playlistmag.com/help/2005/01/2waystreet/
Good luck!
Patrick

Undo.cpp line 3067 error when scrolling listbox

In my application, I initialize a LV multi-column listbox as empty (Item Names set as an empty string array). Then I start writing to this property (Item Names), and once in a while, when scrolling down in the listbox, LV crashes and I get an 'undo.cpp line 3067' error. Any ideas? I thought it may be an array initialization problem, so I init it now with a string array much larger than what I plan to write to it. I get the same crash.

vituning,
Are you scrolling around in the multi-column listbox, then deleting all or most of the contents. The error probably happens when you try to undo this action or when you try and scroll the listbox again? If so, before you delete the data, programmatically scroll the listbox to (0,0) or so that atleast valid data will be shown. This should avoid this error.
Randy Hoskin
Applications Engineer
Nationsl Instruments
http://www.ni.com/ask

Error when transfering specific songs from iTunes to iPod

Hi!
I am having this problem: When I am transferring new songs (manually)from my iTunes library to my iPod, I got a error message - my iTunes is in Spanish - which translated into English reads:
"Error when trying to copy in disk NAME OF IPOD. Unable to read nor write in the disk"
It happens with very specific songs, not all new songs but some of them. First I thought these songs were corrupted, however iTunes and WMA can plays them with no problem at all.
I have a 4G, 20Gb iPod, 1.79Gb free space, already installed latest iPod Updater 2005-10-12. Have no issues related to play songs on iPod.
Is there any other way to check if songs are not corrupted ?
Is this a problem related to my iPod ? Pls advise.
Thank you!

I'm still having the same problem. I tried everything, and unless there's a number to call Apple, I'm going to repurchase my music. I only buy it to play it on my iPod.

Line Cord Error when connect to Sky+ Box with BT65...

Bought a new Panasonic TV and had to re sort cables took photos and replaced exactly as before. Did connect the new TV to splitter that works fine.
BT 6500 shows Line Cord error as soon as Sky box connected on own, with micro filter, with splitter. No errors prior to today so wonder if doing something daft.
We have 3x 6500s in house is it REN related? But as worked previously a bit odd.
Extension socket behind TV to micro filter - to spliter as before. Plug in cable to SKY plus box and get a line chord error showing on handset. Disconect and fault goes but noticed this fault reported on many forums BT, Virgin ....ANY advice welcome.

make sure you have connected the cable to Sky box into correct port.... the sky box has 2... an ethernet port for a cat5 cable ( rj45 bigger port ) and an rj11 port for the phone cord.... the problem is this will fit in both!! but if connected to the ethernet port it will put a loop on line and cause fault on phone line...

Error when transferring table data to a CSV format file.

Hi
I am getting an error when I am passing the parameter value for the file name from the selection screen. If i hard code the path and name it works fine. can any one help me please. here is my code:
PARAMETERS: OUTFILE LIKE dxfile-filename
                       DEFAULT 'C:\Apositivepay.txt',
      RUNDATE LIKE PAYR-LAUFD,
      Bank LIKE T012K-HBKID.     "List of Possible Banks
type-pools:TRUXS.
DATA: BEGIN OF OUTPUT_REC OCCURS 0, "Output file for USBANK
      ACCT(12),           "bank account no
      Payee2(40) type c,         "payee 2
      END OF OUTPUT_REC.
data: itab1 type TRUXS_T_TEXT_DATA.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
    EXPORTING
         I_FIELD_SEPERATOR          = ','
     TABLES
         I_TAB_SAP_DATA             = OUTPUT_REC
     CHANGING
         I_TAB_CONVERTED_DATA       = itab1
     EXCEPTIONS
          CONVERSION_FAILED          = 1
          OTHERS                     = 2.
IF SY-SUBRC <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
        filename = OUTFILE "This doesn't work
        filename = 'C:\Apositivepay.txt' "This works
     TABLES
          DATA_TAB            = itab1
     EXCEPTIONS
          FILE_OPEN_ERROR     = 1
          FILE_WRITE_ERROR    = 2
          INVALID_FILESIZE    = 3
          INVALID_TABLE_WIDTH = 4
          INVALID_TYPE        = 5
          NO_BATCH            = 6
          UNKNOWN_ERROR       = 7
          OTHERS              = 8.
Message was edited by: Anwarul Kabir

hi,
use this code and save that file in CSV format it will work
OPEN DATASET P_IFILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC NE 0.
    MESSAGE E000 WITH 'Problem in opening Application Server file'.
ELSE.
    DO.
      READ DATASET P_IFILE INTO IT_UPLOAD.
      IF SY-SUBRC NE 0.
        EXIT.
      ELSE.
        APPEND IT_UPLOAD.
        CLEAR IT_UPLOAD.
      ENDIF.
    ENDDO.
    CLOSE DATASET P_IFILE.
ENDIF.
IF IT_UPLOAD[] IS INITIAL.
    MESSAGE E000 WITH 'NO data in the file/upload problem'.
ENDIF.
LOOP AT IT_UPLOAD.
    SPLIT IT_UPLOAD AT ','
                     INTO
                     IT_FDATA-MATNR
                     IT_FDATA-WERKS.
                    IT_FDATA-SLGORT.
    APPEND IT_FDATA.
    CLEAR IT_FDATA.
ENDLOOP.
   IT_TOTAL1[] = IT_FDATA[].

Anyone ever seen an eventoracle.cpp line 370 error when dealing with an ActiveX control?

I'm dealing with an ActiveX control in LabView 7.0 that allows me to input video / audio from a USB webcamera. The ActiveX control also allows for the playback of the AVI files that are recorded from the webcam. During playback, I occasionally get a eventoracle.cpp @ line 370 error that is hard to diagnose and hard to reproduce. Any ideas? I do have the ability to move to LabView 7.1.1 if needed, but I have not tried that yet.
Chris Davis

hi there
you can adjust the user event data type to your needs. for example you can add a string "source" to the events data. additionally you can pass the "user parameter" to the callback vi to specify its location. see attachment below.....
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
MSCOMCTL_Toolbar_EventSource_LV7.1.llb ‏102 KB

Error when creating data model - Internal Server Error

When trying to create a new Data Model in BI Publisher (11.1.1), we are getting a “Internal Server Error” message and the page to create data models wont display. We are able to login to BIP with any user, but we cant do anything else… (seems due to a null pointer exception, as shown in this message):
+[ServletContext@605092857[app:bipublisher module:xmlpserver path:/xmlpserver spec-version:2.5 version:11.1.1]] Servlet failed with Exception+
java.lang.NullPointerException
We’ve examined bipublisher.log and we get several warnings:
Component: AdminServer
Module: oracle.xdo
Message: SawUtil.setUserHome - Unable to lookup user home: weblogic
Component: AdminServer
Module: oracle.xdo
Message: java.rmi.RemoteException: access denied for user to path /users/weblogic.; nested exception
Then, we get this errors in sawlog0.log:
Component: OBIPS
Module: saw.soap.catalogservice
+Message: Invalid path () --+
File:webcatalogsoaphandler.cpp
Line:877
Location:
saw.soap.catalogservice
saw.SOAP
saw.httpserver.request.soaprequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
AuthProps: AuthSchema=Impersonate-soap|IMPERSONATE=weblogic|NQ_SESSION.AUTHINITBLOCKSONLY=******|PWD=******|UID=BISystemUser|User=weblogic
ecid: e7cc62fc411b9afe:30699382:1389a0e0d36:-8000-000000000000257b,0:4
ThreadID: 4180
This same error repeats for files webcatalogsoaphandler.cpp and localwebcatalog.cpp.
Access to SOAP is explicity granted to BISystemUser (via Manage Privileges ) and we haven’t changed any security policies…
Any ideas why this is happening and how to solve it?
Thanks in advance.
Regards
Edited by: user8021127 on 19-jul-2012 1:12

Did you find a solution to this?

Error when opening/importing model

I am getting the error
Failed to instantiate core.svg:ZDrawing aspect for Transition OG (Source pin C not found)
when I open or import a particual model. I have no idea what it means, and the model appears to work. Are there any ideas as to its cause?

Hi Emily,
The error message means that during the last time the model was edited one of the transition lines was corrupted and the model was saved that way. My opinion is that your model is missing a transition line, try to see if all transition lines are present in the model. I would appreciate if you could attach the model (you can export it) and try to remember or find out what was the last action done on the model that is related to transition lines (for example: deleting an element that was connected with a transition line to another element).
Thanks in advance,
Udi

Line Resource Error when transfering IPPE Model to APO

Similar Messages

Maybe you are looking for