Line target SNR gone from 6 to 9 to 12 and now 15d...

Having connected reliably and almost constantly at 7616 (target SNR 6db) and stayed good for the best part of a year my line is playing up again.
Its gradually stepped from 6db through to 15db over the last two weeks and of course the speed and IP profile are going down the pan too.
I've checked all the usual stuff in the house and tried a substitute router all to no avail.
Now the last time we had this problem it took nearly 2 years to convince BT that it was actually a fault on the line and not the line length! They did eventually fix it (old corroded connectors in a green box) when a mod here forwarded my posts to the 'twitter team'
Is there any chance you could do that again please?
Thanks

Thanks
OK here they are:
You will see that the IP profile hasn't dropped to 4000 yet as the target SNR only went to 15db and the connection speed to 4864 this morning, but when it does the throughput will of course be even slower at about 3700.
Checking my router stats light log I see that it all started to deteriorate on the 30th of May.
Wed 30 May 2012  09:36:07,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:36:22,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:36:37,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:36:52,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:37:07,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:37:22,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:37:37,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:37:52,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:38:07,    Noise Margin= 6.0, Sync Speed= 7520
Wed 30 May 2012  09:38:22,    Noise Margin= --, Sync Speed=
Wed 30 May 2012  09:38:37,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:38:52,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:39:07,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:39:22,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:39:37,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:39:52,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:40:07,    Noise Margin= 9.0, Sync Speed= 6496
Wed 30 May 2012  09:40:22,    Noise Margin= 9.0, Sync Speed= 6496
FAQ
1. Best Effort Test: -provides background information.
Download  Speed
3.91 Mbps
0 Mbps
7.15 Mbps
Max Achievable Speed
 Download speedachieved during the test was - 3.91 Mbps
 For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
 Additional Information:
 Your DSL Connection Rate :4.86 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
 IP Profile for your line is - 5 Mbps
Broadband Link – Detailed DSL Statistics
Collected for 19 days 23:36:54
ATM
Since Reset
Current 24-Hour Interval
Current 15-Minute Interval
Time Since
Last Event
Cell Header Errors:
98854
90
0
1:21:51
Loss of Cell Delineation:
2861
84
0
1:21:51
DSL
Link Retrains:
2
1
0
1:21:51
DSL Training Errors:
0
0
0
0:00:00
Training Timeouts:
0
0
0
0:00:00
Loss of Framing Failures:
4
2
0
1:21:51
Loss of Signal Failures:
4
2
0
1:21:51
Loss of Power Failures:
0
0
0
0:00:00
Loss of Margin Failures:
4
2
0
1:21:51
Cumulative Seconds w/Errors:
95063
7
0
1:21:51
Cumulative Sec. w/Severe Errors:
10
2
0
1:21:51
Corrected Blocks:
2559607
89616
256
0:00:00
Uncorrectable Blocks:
113393
89
0
1:21:51
DSL Unavailable Seconds:
95
27
0
1:21:26
Broadband Link – Statistics
ATM Statistics
IP Statistics
DSL
Down
Up
Current Rate:
4864 kbs
448 kbs
Max Rate:
4864 kbs
1004 kbs
Current Connection:
Current Noise Margin:
15.0 dB
23.0 dB
Current Attenuation:
38.1 dB
22.0 dB
Current Output Power:
19.7 dBm
11.9 dBm
ATM
Cells
Errors
Transmit:
29992982
0
0
Receive:
353265243
0
0
IP
Bytes
Packets
Errors
Transmit:
994136148
9647731
0
0
Receive:
3580357745
14033487
0
0

Similar Messages

  • I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

    I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

    Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
    Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
    Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
    Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
    P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

  • I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

    You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
    Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

  • I rented a movie from itunes on my ipad and now want to play it on my appletv, but cannot get it to show up.  What do I need to do?

    I rented a movie from itunes on my ipad and now want to play it on my appletv, but cannot get it to show up.  What do I need to do?

    If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer."
    http://support.apple.com/kb/ht1657

  • My ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new

    my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I tried to update my ipad from ios 4 to 5 and now it won't connect to my computer - it is fully restored and can't connect - getting an error message. Help!

    I just recently tried to update my ipad from ios 4 to 5 and now I am getting an error message when I try to connect it to the computer so that I can download all of my apps, etc. please help! Error message says iTunes could not connect to this iPad. An unknown error occurred (oxE8000000A).
    Help!

    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.apple.com/nz/itunes/download)

  • Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?

    Hey yall.. I lost everything from my mac from a data encrypted error and now it won't let me download Lightroom off of the disk again onto my new mac. What should I do?

    Hi Brennacoyle,
    Can you please share the error message that you are getting while trying to download on the new MAC ?
    Cheers,
    Kartikay Sharma

  • I accidentally deleted documents from Pages on my iphone - and now they won't show up on my mac anymore either.  I must have saved them just on icloud and not on my mac, too.  is there anyway to recover these documents?

    I accidentally deleted documents from Pages on my iphone - and now they won't show up on my mac anymore either.  I must have saved them just on icloud and not on my mac, too.  is there anyway to recover these documents?

    On a mac, when you save docs to icloud, a local copy is also saved.  It's saved at:
    ~/Library/Mobile Documents
    Note that Library in the user's home folder is now hidden, so you'll have to set Finder to view hidden files.
    The Mobile Documents folder has subfolder where copies of the doc/data files are stored.
    If the file(s) are no longer there, then use your Time Machine backups to get copies back to the mac.

  • I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management.  Can I resolve this?

    I changed my Adobe user ID when we changed from Windows PC to Mac and now I am unable to read previously downloaded ebooks on my Sony Reader device due to Digital Rights Management.  Any ideas how I can get access to these now?

    Hi Blotontheland,
    Thanks for the prompt reply. The interesting thing is that my Macbook Pro was upgraded today to Yosemite and I still have the spinning wheel on the start up screen before the login page comes up.

  • Flash accidentally got uninstalled from my pc laptop (Chrome), and now won't even load websites so I can't download it.  Can I copy it from my desktop?  Or how do I get it back onto my laptop?

    Flash accidentally got uninstalled from my pc laptop (Chrome), and now it won't even load websites so I can't download it.  Can I copy it from my desktop?  Or how do I get it back onto my laptop?

    Hi micha164,
    I am curious to know how did Flash Player get uninstalled from Chrome? If you can please share steps to reproduce how your Flash Plugin got Removed?
    Also, Can you open chrome application Goto Chrome://plugins and See if Adobe Flash Player Plugin is Disabled? If yes, kindly enable Flash Player Plugin by clicking the [blue colored]enable link and restart the browser to see if the changes have reflected.
    Because Flash Player cannot be uninstalled from Chrome using any uninstaller, as it is embedded part of the app installer/update and can only be removed if you remove the plugin reference from the location on disk. Possibility is that your plugin got disabled and did not get enabled after that.
    Please see if it helps. If the above does not work then the only resolve is to update Chrome app. Please let us know if your query got resolved or not.
    Piyush

  • I swtiched from LabView7 to LabView8.2, and now my parallel port on LPT1 is not more recognised (I am not able to use VISA to write on it). Why?

    I switched from LabView7 to LabView8.2, and now my parallel port on LPT1 is not more recognised (I am not able to use VISA to write on it). Why?

    Hi,
    Sorry for the delay,
    I need to know more informations about your problem. Have you check the configuration of LPT in MAX? Can you open a VISA session? Do you receive a timeout error when you try to write on that port?
    You can find same importants informations about parallel port configuration for different versions of LabVIEW at this link: 
    http://digital.ni.com/public.nsf/websearch/E6415E8A8376F63D86256C46007592E8?OpenDocument
    Let's me know.
    Riccardo

  • I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords).  What can I do?

    I restored a Macbook Pro from a Time Machine backup and now none of my passwords are working (and I know they are the correct passwords).  What can I do?

    First, make sure caps lock is not on.
    Another reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. You can select one of the available layouts by choosing from the flag menu in the upper right corner, if it's showing, or cycle through them by pressing the key combination command-space or command-option-space. See also this support article.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
    Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
    Start up in Recovery mode. When the OS X Utilities window appears, select
              Utilities ▹ Terminal
    from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
    In the window that opens, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
               ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.

  • I just reinstalled from my time machine backup and now it is asking me for a user id.  I never had one before

    As part of the hard drive recall for imacs i had my drive replaced.
    i just reinstalled from my time machine backup and now it set up a user id, I never had one before. Of course I don't know the password and cannot get in.
    Why?  How do I get around it?

  • How to get a iphone 5s from iphone 5, i bought mine from walmart 4 months ago and now want the new one is there a plan that they have like you only pay a little if yoou take your iphone 5 ??

    i bought mine from walmart 4 months ago and now want the new one is there a plan that they have like you only pay a little if yoou take your iphone 5 ??

    Why do you believe you are entitled to an upgrade?
    Do you get to upgrade to a new car when the manufcaturer releases a new model?
    What about tv's? Computers? Appliances?
    This is no different.  If you want the newest model, buy it.

  • I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

    I just update my Mac operating system from Snow Leopard to Yosemite and now have to upgrade my Epson Printer WF3540 so that it will be able to scan. Will Adobe be compatible with these softwares?

    Hi spiritentrep,
    What Adobe software are you referring to? Are you using Acrobat? You should have no problems running Acrobat XI on Yosemite, and as along as you have compatible scanner drivers for your Epson, you should be fine there as well.
    Best,
    Sara

Maybe you are looking for

  • How to setup database user for windows NT SSO

    Hi, We have a scenario where we have to setup a database user so that SSO can be worked in windows environment. We have oracle 10g installed on UNIX server. Now we want to setup a autosys user which will also be a winows user for eg by the name kumar

  • Add color to mail tool bar icons?

    Howdy I just updated to Lion. Is there a way to add color to the icons used in Mail? It looks pretty blah as it is. Thanks rlmslo

  • Re: Transaction for OBYC

    Hello Experts, In obyc i created a new Trasaction CCC for Commission purpose but if i see in OBYC for CCC i can see only Valuation modif & GL Account, i cannot see the Valuation class because i need to assign GL Account base on Valuation class not on

  • License CallMgr 5.1 7825 Appliance, 1,000 seats

    Hi, I am Mohammed Afzal Siddiqui working as a Network Engineer in "STESA" Co. We are going to implement a project which is having 2811& 2821 voice enable routers with VIC2-2FXO,VIC-2FXS,VIC2-2E/M Cisco 2800 IOS SP Services router and 3750 24 10/100 P

  • Need a tip for a Fieldpoint program

    Hi, I have a main program which includes several subprograms. The used hardware is Fieldpoint. (several AI) All subprograms uses different channels of those AI. What is the better way to deal with this AI: - reading all AI's (with "fp read") in a arr