Line tool shadow

When I use the line tool, I get a shadow line. I need as clean 1px line. How do I turn off the shadow.

How strange. I see it as well. And it's inconsistent - the following were five lines drawn one after the other starting from the top. This was after resetting the tool and deleting the preferences file.
As a workaround you could use the pencil tool - for lines it is easiest to click the start point, then Shift+Click the end point. On straight lines it's nice and clean.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Similar Messages

Line Tool in Adobe Acrobat 9.0

The line tool is permitting only horizontal and vertical rules, and it attempts to join these as 90-degree angles. Is there a way to adjust this so that I can make diagonal rules?

I can draw lines at any angle with the line tool. Just keep your finger off the shift key.

GUI Applications unable to use command line tools

Hi All-
I've searched, but I can't find a thread about this one, so...
On OS 10.4.5:
Whenever I use a GUI app that wants to use a command line tool (e.g. curl, df, java), the app fails giving an error message to the effect of "unable to find curl" or the like. It is as if the GUI cannot find my unix $PATH.
Examples:
-- Eclipse refuses to launch, because it appears to use "java xxxxxxx" to launch.
-- Automator fails to run certain Safari actions because they use curl to navigate web pages.
-- Carbon Copy Cloner fails to launch, because it can't find a tool (df, IIRC) to read drive/volume info
Possibly relevant details:
-- I can use the tool in question from the command line, so they are present, and in my $PATH, but the GUI can't find them.
-- I recently moved from an old G4 to a relatively new G5, and had issues migrating files, so I eventually just copied my entire home directory from the old machine to the new, replacing the freshly created one on the new machine. I feel like that missed something that tells the GUI where your $PATH is, or some other link between GUI and command line.
-- I created a new user, and that user does not experience the same troubles. This adds to my suspicion that it is account/PATH related.
Any help anyone can give it greatly appreciated.
-p
PM G5 dual 2.0 Mac OS X (10.4.5)

Did you by any chance create an evironment.plist file? It is located in ~/.MacOSX/ If you don't know about it or don't know to look (.MacOSX is normally invisible), try this:
In Finder.app, in the "Go" menu select "Go to Folder..." (shift-command-G), type ~/MacOSX in the text field and hit OK, the finder should then open a window or complain.
If it opens a window and you find in it a file named environment.plist move that file to the desktop and try your applications. Do they work as advertized? Try again after logging in/out if things don't work. Do they work now?
Whatever hapens, tell us more...

Running a command in a command line tool in fastest way

Before anything I want to clarify some terms :
apk
file (android application package file) : equivalent to executable (exe) files on windows
aapt.exe
: A command line tool which comes with android sdk in order to fetch information of an apk file (It obviously has other usages)
note : This question is not about an android feature. It's all about C# and functionality of .Net framework
An
apk file has a name just same as any other file, but it has a internal name (which will be shown when you install apk file on android os as name of application)
with
aapt.exe I can get internal name of an apk using following command :
aapt
d badging "<apk path>"
I
have copied aapt.exe where executable file of my c# application is and I want :
Enter
above command for each apk in selected directory (using GetAllFiles method)
I want to get internal names of apk files and
I've tried a lot of ways and I've searched a lot. finally this is what I've got :
Process proc = new Process();
proc.StartInfo.FileName = "cmd.exe";
proc.StartInfo.RedirectStandardInput = true;
proc.StartInfo.RedirectStandardOutput = true;
proc.StartInfo.UseShellExecute = false;
proc.StartInfo.StandardOutputEncoding = System.Text.Encoding.UTF8;
proc.Start();
using (StreamWriter sw = proc.StandardInput)
foreach (string path in Directories.GetAllFiles(@"E:\apk", "apk"))
sw.WriteLine("aapt d badging " + "\"" + path + "\"");
//following line doesn't work because sStandardInput is open
Debug.WriteLine(proc.StandardOutput.ReadToEnd());
// There will be a really huge amount of text (at least 20 line per sw.Writeline) and
//it impacts performance so following line is not really what I'm looking for
Debug.WriteLine(proc.StandardOutput.ReadToEnd());
GetAllFiles is
a function that I've created to fetch all apk file full path. It gets two argument. First argument is path and second one is extension of file you want its full path to be fetched.
This is not final code.
As I've commented it out first Debug.WriteLine doesn't
work and second one is not a good idea. how should I get output from proc?
I have tried running process by argument and its awful :)
As another approach :
Because apk files are basically zip files I can extract them get what I want from them.
There is an xml file named Androidmanifest.xml in every apk file.
Androidmanifest.xml is like an ID card for an apk file and apk internal name can be found in it but here are some problems with this approach :
1. Androidmanifest.xml is not a plain text file. It's coded and it requires a lot of complexity to decode it
2. application name (or apk internal name) is an attribute in this file and it's value is not a string value. It's a reference to a file where strings are stored and worst thing is it's not an easy to find out reference. It's just a number

And you don't get any output from it? Maybe you're passing the arguments incorrectly?
No. I don't get any result and I have checked arguments and it's correct.
But you are already running a separate process for every apk file. You start a single cmd.exe and then send it commands that will cause aapt to be run for every file. Unless aapt accepts multiple apk filenames on the command line there's no way
around using separate processes.
I didn't know that. anyway speed in this way is much more rather than creating a function. creating a Process object in it and calling function for each apk file.
I read somewhere that it's possible to run multiple commands in cmd by & operator but as you said I think every command runs aapt. I have tested this approach too and it's very very slow
fastest approach I have found is what I have wrote here and speed is about 0.6 per apk file which is still slow when there is thousands of apk files.
I tried an application that does same thing (fetching apk information) and in it's installation directory I found aapt.exe which means it uses this tool to get information but speed is significantly faster rather than my application.
So what's your suggestion about this?

Error while exporting webi reports using BIAR command line tool.

HI,
We are trying to export webi objects to a biar file using the biar command line tool, biarengine.jar in XI 3.0. We are using the query select * from ci_infoobjects where si_kind='webi'.
We are getting an error "unable to create plugin object".
Export of all other objects is going through fine.
Any ideas?
Thanks,
Ashok

Try this
importBiarLocation=C:/test.biar
action=importXML
userName=UserName
password=Password
CMS=cmsname:6400
authentication=secEnterprise
exportQuery=select * from ci_appobjects where si_kind='universe'

Command Line Tools installs the latest version of clang (and others) in /Library/Developer/CommandLineTools/... but not in /usr/bin/

I've upgraded Xcode to the latest 5.1 Installed Command Line Tools via xcode-select --install Homebrew tells me "A newer Command Line Tools release is available"
brew --config:
Xcode: 5.1 CLT: 5.1.0.0.1.1393561416 LLVM-GCC: build 2336 Clang: 3.1 build 318
Checking my clang executable:
$ /usr/bin/clang --version Apple clang version 3.1 (tags/Apple/clang-318.0.58) (based on LLVM 3.1svn)
$ /Library/Developer/CommandLineTools/usr/bin/clang --version Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
So it appears Command Line Tools didn't install clang (and perhaps other executables) into /usr/bin? I checked my other laptop (w/ Mavericks), and /usr/bin/clang is version 5.1.
So I'm guessing this is the problem? I've tried to reinstall Command Line Tools as sudo, but now it won't let me install again (says software isn't currently available).
Can anyone help me with this? I've spent hours on it now, but can't find a solution.
Thanks

BTW, I installed Xcode 5.1 from the Store, but have never run xcode-select --install. Here is the verbose output from a clang.
xew ~/$:clang -v -o hello main.c
Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn)
Target: x86_64-apple-darwin13.1.0
Thread model: posix
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/clang" -cc1 -triple x86_64-apple-macosx10.9.0 -emit-obj -mrelax-all -disable-free -disable-llvm-verifier -main-file-name main.c -mrelocation-model pic -pic-level 2 -mdisable-fp-elim -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 236.3 -v -resource-dir /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -fdebug-compilation-dir /Users/xew -ferror-limit 19 -fmessage-length 100 -stack-protector 1 -mstackrealign -fblocks -fobjc-runtime=macosx-10.9.0 -fencode-extended-block-signature -fdiagnostics-show-option -fcolor-diagnostics -vectorize-slp -o /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -x c main.c
clang -cc1 version 5.1 based upon LLVM 3.4svn default target x86_64-apple-darwin13.1.0
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/usr/local/include"
ignoring nonexistent directory "/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.9.sdk/Library/Frameworks"
#include "..." search starts here:
#include <...> search starts here:
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/include
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/usr/include
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk/System/Library/Frameworks (framework directory)
End of search list.
"/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain /usr/bin/ld" -demangle -dynamic -arch x86_64 -macosx_version_min 10.9.0 -syslibroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/ SDKs/MacOSX10.9.sdk -o hello /var/folders/zf/d5vqmmtn5mq7h6766jtlkrvr0000gn/T/main-353995.o -lSystem /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/../lib/clang/5.1/lib/darwin/libclang_rt.osx.a
xew ~/$:

Issue while creating BPEL artifacts using BPEL command line tool

All
I am trying to create BPEL artificats for SQL server stored procedure for SQO Server 2005 using BPEL Command line tool.
My demo.properties is
ProductName=Microsoft SQL Server
DriverClassName=com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionString=jdbc:sqlserver://10.10.20.2:1433;databaseName=dAP
Username:apcdb
Password:password1
SchemaName:dev
ProcedureName:spiSOATesting
ServiceName:SQLServerSPService
DatabaseConnection:MSSQLServer
Destination:c:/temp/sqlprocedure
and I have create a batch file called as generate.bat and it contains following information
java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\jlib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %1
and when I try to run the command at BPEL PM Developer Prompt, I am getting Procedure not found, Can one please tell, what is the cause of this error. and how does this command line tool exactly work.
Following is the output from command prompt.
D:\product\10.1.3.1\OracleAS_1\bpel\samples>D:\temp\sqlprocedure\generate.bat D:\temp\sqlprocedure\demo.properties
D:\product\10.1.3.1\OracleAS_1\bpel\samples>java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar
;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\j
lib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts D:\temp\sqlprocedure\demo.properties
Procedure not found: dAP.spiSOATesting
Thank you

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Acrobat pro: how set default properties for arrow and line tool seperately?

I have a problem with the 'comment and markup' tools in Adobe Acrobat Pro.
I would like to change the defaults of some of the tools, eg the arrow and the line tool.
This can be achieved by right-clicking on something drawn using the tool in question and then selecting 'properties' - or by selecting the tool and then press ctrl+E, wich opens a 'Callout Tool Properties', and then change what you want there. The latter option keeps the changes as defaults - the former offers a box to tick in the 'properties' dialogue that opens - or, you can right-click on the object again after having changed the properties, and then select 'Make Current Properties Default'.
My Problem is now, that, apparently, you cannot choose and save default properties freely and for each tool. I woul like to have the default properties for the line tool set as the following:
-line color: yellow
-line thickness: 8pt
-opacity: 60%
and fot the arrow tool as this:
-line color: red
-line thickness: 1pt
-opacity: 100%
This all works fine as long as the program is open. As soon as I exit and start it again opening another document /the same one again, the arrow tool changes to
-line color: yellow
-opacity: 60%
only the line thickness remains at 1pt.
If I change the properties of the line to the ones I want for the arrow, the arrow properties remain unaltered if I close Acrobat Pro.
Why do these properties interfere? Why is it "line color/thickness" in both? Why, then, do only the opacity and the color interfere, but not the thickness - even if it's the latter two properties that are bot called "line xxx"? Why does Acrobat not save all properties for these two shapes seperately - even IF the two shapes are both of a line-like kind?
Is there a way to get around this?

Trobbel - This indeed is puzzling behavior. Clicking 'Make Current Properties Default' should preserve the default appearance for each. I don't have a solution, but merely a couple of suggestions:
1) Make sure you have installed any available upgrade for your version of Acrobat Professional.
2) Consider using the line tool exclusively - you can add an arrowhead and make one tool perform both tasks.
Hope this helps. /rmbrown

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

Line Tool Question

Hi, I'm new to this forum. I'm using freehand for my job and today when I select the line tool
to draw a line across a box, a small circle is appearing in the cross hatch.
Does anyone know what this is and how to stop it? It's never done it before.
Below is a picture to show what I mean.
thanks, Allison

Hi Allison,
If you have any of the snap-to functions enabled (snap to guide, object or grid) then FH draws a small circle when the cursor hovers over a snap target. I shows you the exact location where the snap will occur. I don’t see it before starting to drag a line, though.
You should see it on other tool cursors as well, such as pen, rectangle, ellipse, etc.
Do you have any snap-to functions enabled?
Judy Arndt

"add_mp_to_mpa" is not recognized by OEM 12C Command line tool

Hi,
As per Oracle® Enterprise Manager Command Line Interface 12c Release 1 (12.1) document ( http://docs.oracle.com/cd/E24628_01/em.121/e17786/cli.htm ), after the EM CLI Client is installed basic operational verbs like 'add_mp_to_mpa " can be used to create managenment plug-in archive. But when i am using this command with OEM 12C EM CLI command line tool it throws following error
+Error: The command name "add_mp_to_mpa" is not a recognized command.+
+Run the "help" command for a list of recognized commands.+
+You may also need to run the "sync" command to synchronize with the current OMS+.
I also used sync command to sync with my OMS server. The sync command ran successfully with output "Synchronized successfully" .
When i use help command("emcli help") to see the list of command it supports, it doesn't list this ('add_mp_to_mpa ') verb.
Please tell me how can i use this particular verb to create my own management plug-in archive(.jar file) in 12 C.
-Tripati

"add_mp_to_mpa" verb is no longer an emcli verb in EM 12c. The plug-in framework has changed EM 12c. If necessary, please see the following doc for information on packaging and deploying a plug-in.
http://docs.oracle.com/cd/E24628_01/doc.121/e25161/package.htm#CACDJJDA
Regards,
- Loc

How are Windows Server Backup and Command Line Tools used in vCSHB installation?

How are Windows Server Backup and Command Line Tools used during the installation of vCSHB? Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment? Are these tools not used in some deployments?

You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

What are the commands for compiling c++ using the command line tools for xcode?

Hi, I am taking a class in school for c++ and i would like ot be able to practice at home i found the command line tools for xcode and went ahead and installed it on my computer. now i need to know the commands and procedure to be able to compile and run c++.

c++ testfile.cc

How can I create a NetBoot image using command line tools?

Is it possible to create a NetBoot image entirely using command line tools?
(That is, without using the SystemImageUtility)
If so, are there reasonable instructions posted somewhere?
I don't believe I can use SystemImageUtility with my current setup,
but I would be happy to hear how I could:
I have a set of Xserve clusternodes but without optical drives or video cards.
One node acts as the head, running DHCP, DNS, OpenDirectory, Xgrid.
They are wired to a gigabit switch.
I have a PowerBook connected on the subnet which has ServerAdmin Tools installed.
I don't think when I run SystemImageUtility on my PowerBook that I can successfully image one of the clusternodes disks over the network.
I have tried to start one node in target(Firewire) mode, connect it via Firewire
to the head node, and run hdiutil from the head node to make a complete disk image of the clusternode's drive.
But a NetBoot image requires the whole nbi file, right?
Could I then use copy this disk image to my PowerBook and use SystemImageUtility on my PowerBook to create a NetBoot image from it?
I really have tried to read the PDFs, but I found the section on System Imaging in the Command Line Reference rather unhelpful.
Thanks for anyones help.
dmaus
Mac OS X (10.4.4)

To create a NetBoot image, you could just put the cluster node in target mode and attach it to your PowerBook. Then use SIU to create the NetBoot image.
If you're trying to create a backup image of the disk, use hdiutil, or put in in target mode and create the image with Disk Utility.

CohQL command line Tool select query output in file (unix)

Ho to insert Coherence CohQL command line Tool select query result in file in unix platform. I have tried below query but failed
query.cmd -s -c -l "select * from 'dist-example'" >myOutput.txt
I also tried below query, result is displayed in command line but no file is created in folder.
select * from dist-example >myOutput.txt
I also tried one more query, result is displayed in command line but no file is created in folder.
select * from dist-example >/opt/bin/myOutput.txt

Hi,
In Unix you should use query.sh instead of query.cmd
In your case then the command would be smething like:
query.sh -s -c -l "select * from 'dist-example'" >myOutput.txt
You can also try using '>>' instead of '>' in order to redirect to a text file.
Hope this helps.
-Cris

Line tool shadow

Similar Messages

Maybe you are looking for