Line Upgrade - do I now need a Version 2.00 Hub ?

We have the BT Employee package and have had it for some years.  We also still have the Version 1.0 Hub which is becoming a little flakey and we received an email the other day to say our line is to be upgraded this week.  I've seen some comments about the Version 1.0 hub not coping with upgraded lines so just wondered whether we need to upgrade the Hub too ?

Hi Sumdumgi,
Thanks for the post and welcome to the forum. 
Version 1.0 of the BT Home hub should work fine with an ADSL 2 connection.  If you are having problem with this router then please drop me an email to [email protected], include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Similar Messages

  • Win 8.1: Reset vs Install on partitioned drive (XP- upgrade 8- upgrade 8.1) now need clean install

    This is a little complicated.
    I have a Thinkpad T-60 (4GB) and a T-61p (8GB)
    Both machines have SATA drives partitioned in 3 (System, Images, Data)
    Originally, both had XP (the T-61p was RAM upgraded to 8 GB before upgrade (remember the $50 early-bird special?)
    I upgraded the T60 without problem (as I recall).
    I had to get the 64-bit physical upgrade as you could only download the version you already had (32-bit; remember that disaster?) for the T-61p.
    Figuring I had 4 GB on the T-60, I used 64 bit as well, ending up with only 3 GB active.  I take it this was a waste and should have just used the  32-bit, right?
    I clean installed (as I recall) 8.1 using a generic 8 key (right?) and then an 8.1 key (right?, or is that an 8 key that will still activate 8.1?)
    So here it is 3 years later +/- and both 8.1 installs are pretty trashed so...
    I downloaded both the 8.1 32-bit and 64-bit .iso's
    I have my serial #'s
    I tried a Reset on my Server last night (whole disk, no partitions) - it worked, and gave me an option to wipe all disks, or just the C: system disk (which I did, others intact). It is fine, all settings gone, no trash.
    Now the question is what will happen with my partitioned drives. I want a clean install on the C: partition, and D: and E: left alone.
    Will Reset trash all the partitions and load the entire disk? (NOT what I want) .. or ..
    Should I use the Install option? (which I assume will go through the partition manager) and allow me to clean install on C: only.
    Lastly, if I have read correctly, there is no point in putting 64-bit on the T-60 (4 GB) as all you end up is 3 GB active anyway, so I should go back to 32-bit and avoid the 64-bit headaches?
    Thanks!!!

    Hello qudrcps,
    About the ThinkPad T-60 can’t only recognize 3GB ram, please take a look the follow thread.
    http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60P-Windows-7-64-bit-only-using-3-GB-of-RAM/td-p/377623
    Intel Chipsets 945GM and 945PM do not support more than 3GB system memory (RAM), even when a 64-bit operating system is installed.
    Please contact the  manufacturer to confirm if the laptop support 4GB ram.
    Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please explain a bit about other requirements.
    What do you mean about the physical disks 0,1? Do you have several disks?
    About reset the Windows 8.1, please refer to the following article.
    How to refresh, reset, or restore your PC
    http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
    How to perform a clean installation of Windows
    http://windows.microsoft.com/en-HK/windows-8/clean-install
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Upgraded to Yosemite, now need to upgrade iPhoto.  Should I leave external hard drive plugged in during update so that software is "compatible"?

    I upgraded to Yosemite after having not updated my software since purchasing my iMac about 5 years ago.  (I know, bad...)  I have an external hard drive that has 20,000 pics on it and I need to know if I should leave it plugged in during the update.  I'm afraid if I do, something will happen to my pics.  But at the same time, I'm wondering if I unplug it, will the new iPhoto recognize the "old" software and be able to open up the pics on my external hard drive?  I know this can be a problem because I tried opening my EHD on my neighbors computer and our iPhoto versions were different and it wouldn't open on hers.  Thank you in advance for you help!

    When I go to the EHD and try to open it that way, it says the iPhoto library must be updated.  Should I just let it update that as well?  People have told me to copy  my pics to the EHD and store in a safe place, but will I have to get it out and update it everytime I do an update so that the software will be compatible? 
    Before you let iPhoto update the iPhoto library make a backup copy of your iPhoto Library. Updating a large library can take a long time, and if something should interrupt this update, the library may be left in a inconsistent state. It is much safer to have a backup you can revert to, just in case.
    But at the same time, I'm wondering if I unplug it, will the new iPhoto recognize the "old" software and be able to open up the pics on my external hard drive?
    Are the "Pics" on your external drive your iPhoto Library? Or simply folders with image files?
    If your iPhoto library is on that drive, what is the filesystem of this external drive?

  • Upgrade to iOS4, now needs Restored but wont let me restore! (Err 21?)

    Hi there,
    I hope someone can help as the Apple line is closed and I am travelling with my 7 week old son to Ireland tomorrow and at present have no phone!
    I started to Sync my iPhone 3GS as usual and was asked to update to iOS4. No problem. Downloaded then iTunes started to do its thing with my iPhone. A few mins later an error message arrived that a duplicate file existed.
    Tried to sync again but this time it would only let me press Restore. In my summary page on iTunes all note of my serial number, phone number etc were coming up as N/A.
    On pressing restore, it tries extracting software, verifying with Apple, prepares ihone to restore then says:
    The iPhone "iPhone" could not be restored. An unknown error ocurred(21).
    From here it just takes me to a link saying update itunes if necessary, restart pc etc. baasically your usual options which have not helped.
    I travel in 10 hours, cannot get to an Apple store before this and will have to fly without a phone to another country. Can anyone help with this problem? Many thanks

    Maybe try this. Check this thread or search with keyword "duplicate file" under iphone.
    jhillestad
    Posts: 126
    Registered: Aug 12, 2006
    New! iphone cannot be synced a duplicate file name was specified....
    Posted: Jun 17, 2010 2:49 PM
    Click to reply to this topic Reply email Email
    After updating itunes to 9.2 I now get the message " The iPhone "iphone" cannot be synced. A duplicate file name was specified."
    WHY!!!!!?????!!!!?
    I am NOT running iToner so its not that! .
    I knew I should have not updated I get burned every time.
    Mac Pro Mac OS X (10.4.7)

  • Purchased upgrade of Lightroom but need full version

    I inadvertently purchased the upgrade instead of the full version. How do I bump it up to the full version?

    Please see Return, cancel, or exchange an Adobe order -
    http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • HT4623 iphone4 upgrade to ios7 now need to restore

    Help! I updated to ios7, my phone has itunes symbol and cable pic. Online I saw that I needed to connect to itunes but I never synced to my desktop. Stopped at Verizon and was told to install itunes, plug in and it will work. On itunes I get the error that it recognizes a phone in recovery mode and must restore befor using itunes. I have no idea how to restore a phone that is locked with the itunes logo and pic of cable.

    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

  • After installing a new upgrade my computer now says...

    After installing a new upgrade my computer now says QuickTime version 7.0d0 is installed, iTunes requires Quicktime version 7.0.3 or later.
    Please reinstall iTunes.
    So... won't that erase all of my music?and is it talkin bout the silver cd that says ipod on it?

    hi Donnie!
    first let's try a careful standalone QT 7.0.3 install:
    b noir, "QuickTime Installation FAILED!! "Error Code: -1"" #1, 10:31am Oct 22, 2005 CDT
    keep us posted.
    love, b

  • I would like to upgrade my OS to the latest version.  I now have 10.6.8 and my machine has 1Gb of memory.  Need 2Gb for the new OS.  Is is possible (and practical) to add memory to a machine that's five years old?

    I would like to upgrade my OS to the latest version.  I now have 10.6.8 and my machine has 1Gb of memory.  Need 2Gb for the new OS.  Is is possible (and practical) to add memory to a machine that's five years old?

    You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
    You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
    These are good online stores for Mac compatible RAM
    OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
    Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
    Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
    Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • I have a new OS X now my Iphoto version 8.2 needs upgrading I downloaded 9.3 but I cant use it as I need a minimum of 9.1 how do I do this ?

    I have a new downloaded OS X now my Iphoto version 8.2 needs upgrading I downloaded 9.3 but I cant use it as I need a minimum of 9.1 how do I do this ?

    You can purchase the newest version of iPhoto on the Mac app store. Cost (in US dollars) is $14.99.
    It sounds like you downloaded an iPhoto update to take version 9.1 up to 9.3. You can't use it with version 8.x.
    Best of luck.

  • I upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back?

    i upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back? I tried using the shortcut for it and nothing happens. When I try to do it from the view menu, it shows up as something I can't click on. The new library format is driving me crazy and I just want to get back to the old library view.

    We need to sort out some facts here first:
    •  You cannot be running Mt. Lion on your iMac G5.  What Mac is it?  What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
    •  What is the model of your Epson Scanner?
    •  Have you attempted to scan using Image Capture, located in your Applications folder?
    •  Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
    1)  partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
    2)  install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
                                  [click on image to enlarge]

  • After upgrading to Yosemite I had to upgrade iPhoto and now it says I need to update my photo library or it will be lost...HELP

    After upgrading to Yosemite, I had to upgrade iPhoto.  Now when I try to open iPhoto I get the following message:
    The photo library needs to be upgraded to work with this version iPhoto.
    Your photo library will not be readable by previous versions of iPhoto after the upgrade.  The upgrade process for very large libraries may take an hour or more to complete .
    Question is...how do i upgrade the photo library?

    You can't back up an open iPhoto...
    Most Simple Back Up:
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • I need to upgrade but don't know which version I have to get.  Do I have to go through each lower version or can I go straight to 10.8 then get free MAverick upgrade?  I live FAR from Apple store, so download upgrade is preferred.  :)

    Need a newer version of Os to run printer and software.  Confused if I need to get which version to be able to upgrade to MAverick for free.  Also, need something I can download since Apple store is far away. 

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    (NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X. For detailed information see this user tip:  https://discussions.apple.com/docs/DOC-6271 )
    The OS 10.6 Snow Leopard install DVD is still available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Before installation you should back up all your data.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Final Cut Studio 5.0.4 Upgrade to Final Cut Studio 2 HD Crash now needing to install on laptop

    I had Final Cut Studio 5.0.4 on my laptop which I upgraded to Final Cut Studio 2 during the 12 month period when it was offered at a reduced price.  My old G5 Hard Drive has bit the dust and I am trying to install on my laptop.  I have successfully re-installed upto 5.0.4 including the troublesome compressor 2.0.1 and Qmaster 2.0.1.  There are no further updates apparently when my laptop scans for any.  I am running OSX 10.5.8.  Now when I put the disks in for the Studio 2 all FCP, Motion, Soundtrack Pro, Compressor, DVD Studio Pro, Apple Qmaster, Live Type and Cinema tools are all grayed out, saying they need to be upgraded first.  I am guessing it is because this 12 month deal is no longer available.  Does anyone know a work around for this?  I paid $499 for this upgrade and I cant re-install it?
    My laptop is 2.4 GHz Intel Core Duo, 2 GB 667 MHz DDR2 SD RAM, small for FCP but I don't keep files on there.
    Any help would be appreciated.
    jennymanning

    why did you install FCP 5 when you are going to install FCS 2?   FCS 2 upgrade installer does not need  FCP 5 installed and therefore you dont need updates as you will be installing a newer version of FCP.
    During the installation process of FCS 2 it should ask for the serial number of FCP 5 then ask for the upgrade serial number for FCS 2. You must have both of these or it wont install.
    Check this spec for FCS 2 with your laptop to see if it is compatible, if the machine is not compatible, it wont install.
    Final Cut Studio 2 Spec

  • I have upgraded to Mavericks, iphoto is now saying my version is out dated, everything else is fine this is the only problem.

    I have upgraded to Mavericks, iphoto is now saying my version is out dated, everything else is fine this is the only problem. Tried looking for updates etc, to no avail.....any ideas???

    Check your version of iPhoto. If it is iPhoto 08 7.1.5 from OSX days it is old and if you want a current version you will need to purchase it on the Apple App store.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

Maybe you are looking for