Line width on framemaker table

hi there... i've got an issue on generated the framemaker9 - pdf.
First, After generated to pdf, the table line width looks like not consistent. There are some thin and thick.. how must i do to get the table look nice with the all line is thin...
procedure that i use to build the table is ------> Custom ruling and shading - choose from table (apply ruling style)
Second - what is the difference between click or not at convert CMYK to RGB at settings in PDF Setup ? What exactly the function of convert CMYK to RGB ?

Sha,
If you have two separate questions, please create two posts. (Converting CMYK to RGB is the default behaviour of all previous versions of FrameMaker on Windows. Switching off this conversion is supposed to pass through the CMYK data when saving as PDF. Whether you need this or whether it works completely as you need it, you have to test.)
Regarding line widths: Have you printed the page?
Assuming your line with is set to be 0.5pt. With 72pt/inch and 25.4mm/inch you get a theoretical line width of 0.1764mm.
Your screen has a resolution of maybe 96ppi (pixel per inch) so each pixel has a width of 0.2645mm. You can see that with pixels so wide, you can not successfully show 0.1764mm in 100% zoom size. The software (e.g. Adobe Reader) tries its best, but sometimes fails. The human eye is very good at detecting patterns and recognizes even slight changes inside a pattern very easily.
Your printer may have a resolution of 600dpi (dot per inch) so each dot is as tiny as 0.0423mm. This time the printer may use about 4 dots to create the 0.5pt line, with a 1200dpi printer it could be 8 dots.
So in the end what you see is just a technological limitation. If the so-called "Retina" display makes its way into mass market with >300ppi resolution those effects will fade away...
- Michael

Similar Messages

Width of type of line "LINE" doesnu00B4t fit the width of the table - Smartform

Hi;
I´m working with the Z smartform of "YBAA_SDINV", my problem is the next:
a) The width of the "TABLEITEM" node had a 31.09cm,
b) then i reduced the size of the "TABLEITEM" window and activate the smartform, not warning about problem size was displayed
c) i go to tcode VF03 to preview the invoice but it does´nt display it
d) i return to the Z smartform a modify to original size and activate, go to VF03 to preview and it doesn´t display it
c) i change manually the size of the width of th table to 28cm, activate and get error size message
d) i close the smartform with out saving
e) i return the width of th table to 31.09cm an now when i see the DETAILS of the TABLEITEM all the sizes are gone for all the defined lines
IT_GEN3 => this is the line i´ve defined to display data in the invoice, and is the only one with numbers in the columns
HD_GEN
IT_GEN
IT_DESC
IT_GEN2
IT_CUSTMAT
How can i make to display again the content of the line...?
Thanlas on advance

If you use a baseline grid and space before/after your spaces must by necessity equal the leading (using the align to grid option will force them to the grid, regardless of the chosen size). The grid should match the leading of your body copy.
If you have headings that you want space before and after, don't align them to the grid, but make sure that the total of the space before, after, and leading for the style add up to a multiple of the body text leading. That will work smoothly everywhere except at the top of a column, where the space before is ignored, and will be added to the space below by virtue of the align to grid on the body copy.
If instead of having all the copy lign to the grid you just want the top and bottom lines flush, and you want the leading within the paragraphs constant, but a variable space between paragraphs, set the text frame to vertically justified, then set the maximum spacing between paragraphs to a ridiculously large number and all of the extra space required to fill the column will be split between the paragraphs.
Peter.

Can someone help me change the line width of my numbers table, its not set to thin or none and its stuck on .25. its a spreadsheet i imported from excel.

Can someone help me change the line width of my numbers table, its not set to thin or none and its stuck on pt25. its a spreadsheet i imported from excel.

MR,
Apparently the import wasn't a good one.
The best option at this point might be to start a new table. Insert a new Table, Copy the old table cell range, select the first cell in the new table and Edit > Paste and Match Style. This will throw out all the old formatting. A bit of work, but a nice clean start.
Jerry

How to decrease line width in table in smartforms

hi i want to decrease line widht in tabel in smartforms.
how can i do.
thanks.

Hi
The width of the Line Type in a table is decided by table width itself. For example 20cm is the width of the table,then you can divide the table width into number of columns you want. If you want only 2 columns then,
next to the line type..one column width would be 10 and the other would be 10...so If you want to decrease the width of a column in the line type..then you would have to adjust that in the other one.
For example, If 10 and 10 cm each is what you have in your line type, then in the first column you can reduce the width to 5 cm and then increase the other column width to 15cm, in that way the total width of the line type will be equal to that of the table width.
Also, it is not necessary that the line type width should be equal to table width. It can be less also.
You can adjust the width at details tab..here you will have the table line type details like this:
Line Type 1. 2.
LTYPE1% 10.00cm 10.00 cm "here you can reduce the table line width.
Hope I am clear.
Regards,
Vishwa.

Email with text attachment with line width 1250

Dear all,
             I want to send the email with text attachment whose line width in text file is 1250. Kindly let me know how to send email attachment with more than 255 line width.
Regards,
Manoj
Moderator Message: Frequently Asked Question. Please search for available information before posting.
Edited by: kishan P on Apr 29, 2011 2:48 PM

Hi,
What ever text you are sending in the email, create a standard text for it using tcode SO10. In the program use the FM READ_TEXT to get the data into internal table which will be of length 132 char. If you want line widht of 255 chars convert using FM SX_TABLE_LINE_WIDTH_CHANGE as below,
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
    EXPORTING
      line_width_dst              = '255'
    TABLES
      content_in                  = it_data
      content_out                 = it_mess_att
    EXCEPTIONS
      err_line_width_src_too_long = 1
      err_line_width_dst_too_long = 2
      err_conv_failed             = 3
      OTHERS                      = 4.
Use FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send email.
Hope this will help you.
regards,
Tulasi.

Scatter plot line width

First off, I'm using the trial version of iWork '09. So I want to eventually put a chart into keynote to present to my colleagues, however, putting the chart up on a projector requires me to have a thicker plot line. So if I use a scatter plot, my axis' turn out great, but I cannot adjust the line's width. I don't want symbols, I just want a line connecting the points. If I use the line chart instead of the scatter, the x-axis displays "Untitled 1, Untitled 2" as the labels. I can't change them to the corresponding numbers which is annoying. I can change everything else fine: axis line width, font size, etc. Its just eh connecting line I'm having trouble with

Actually, found a roundabout way to do this. Have to use line chart and in the x-axis label, you have to insert your formula for what cells you want such as Table 1 :: B212:B912 and just set the category counter to only include one label every so many counts. Kind of a pain, but works. However, can't have only the few tickmarks (should be 5 labels and corresponding 5 tickmarks in my case, but I have 5 labels and 700 tickmarks), all are shown instead. It tacks all of the labels individually, but you can choose which ones are shown, but cannot remove tickmarks... Any ideas?
Message was edited by: chemgoof

How to set initial column widths for a table

What I'd like to do is to control the initial column widths for a table.
I'm building the table by using a class which extends AbstractTableModel. This class takes care of setting the headers and reading the data for the table.
If I do the following:
VarTableModel vtm = new VarTableModel(vi);
JTable jt = new JTable(vtm);
JScrollPane jsp = new JScrollPane(jt);
frame.getContentPane().add(jsp);
frame.setVisible(true);
I will see a table in my window. The widths of the columns are equal and are a function of the horizontal dimension of the window.
I have tried to set the width of a column by doing the following:
TableColumn aColumn;
aColumn = jt.getColumn(vtm.getColumnName(0));
aColumn.setWidth(40);
But this has no effect on what gets displayed. I can force the widths that I want by using 'setMaxWidth' but this has the unfortunate side effect of not allowing the user to make the column wider if they want.
What I'd like is a way to specify the widths of the columns when initially displayed and then let the user adjust to their liking.
I'm sure that there is a way to do this, but I don't seem to understand where to intervene in the process to produce the effect that I want.
Any help or suggestions will be greatly appreciated!

Table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
add this line and try ur codeThanks for the suggestion! Unfortunately, it doesn't seem to do the trick. Here is an abbreviated segment of my code:
vtm = new VarTableModel(vi);
JTable jt = new JTable(vtm);
// we want a horizontal scrollbar, so turn resizing off
// and we want to control column widths
jt.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
aColumn = jt.getColumn(vtm.getColumnName(0));
aColumn.setWidth(40);
. // same kind of thing for each column
aColumn = jt.getColumn(vtm.getColumnName(4));
aColumn.setWidth(400);
JScrollPane jsp = new JScrollPane(jt);
frame.getContentPane().add(jsp);
frame.setVisible(true);
If I do the above, the table gets displayed with each of the five columns the exact same width. So, the sizing of the columns is happening somewhere else despite turning auto resizing off.
Where is that occurring and how can I intervene so that I can control the widths of the columns on initial display and still allow the user to adjust the widths if they so choose?

How to make the diagonal line in the swing table cell?

Hi all,
How to make the diagonal line in the swing table cell just like the link below?
http://61.132.17.188/webber/table.gif

One improvement.. To get a line that is neat, use a bit of Graphics2D
    public void paintComponent(java.awt.Graphics g)
        int w = getSize().width;
        int h = getSize().height;
        // draw a line between (0,0) and (w,h)
        g.setColor(getForeground());
        if (strTop == null)
            strTop = " ";
        if (strBottom == null)
            strBottom = " ";
            java.awt.Graphics2D g2 = (java.awt.Graphics2D)g;
          g2.setRenderingHint(java.awt.RenderingHints.KEY_ANTIALIASING,java.awt.RenderingHints.VALUE_ANTIALIAS_ON);
          //g2.setStroke(new java.awt.BasicStroke(14.0f));
        g.drawLine(0, 0, w, h);
        //the following lines will draw the two strings,
        //one above the top of the line and the above below it.
        g2.drawString(strTop, (w/2)+2, (h/2)-2);
        g2.drawString(strBottom, 2, (h / 2) + 2);
        //the x,y for drawString are only based on assumption.   //do necessary changes to suit ur needs.
    }Then create a TableCellRenderer and set it to the Table Header for ur table's 1st row.....
Cheers

In "LOOP ... WHERE ..." the line type of the table must be statically defin

Hi All,
        I have written the code, for greater than (GJAHR) 2007 and restricted company codes ( table name = ZGLCCODE).
     Here I have written the following the code which is giving an error
In "LOOP ... WHERE ..." the line type of the table must be statically defin
ZGLCCODE Contains only restricted company codes.
Code is as follows
TABLES : ZGLCCODE.
DATA : LT_DATAPACKAGE TYPE TABLE OF DTFIGL_4.
DATA : LS_PACKAGE TYPE DTFIGL_4.
TYPES: BEGIN OF LS_TZGLCCODE,
       ZBUKRS type BUKRS,
        END OF LS_TZGLCCODE.
DATA : LT_ITZGLCCODE TYPE LS_TZGLCCODE OCCURS 0 WITH HEADER LINE.
DATA : LI_NUM TYPE I,
       LC_ZGJAHR TYPE BSEG-GJAHR VALUE '2007'.
SELECT ZBUKRS INTO TABLE LT_ITZGLCCODE FROM ZGLCCODE.
Note: "C_T_DATA" dynamic structure = "DTFIGL_4" structure
*- Remove from the DataSource Company Code -
LOOP AT C_T_DATA INTO LS_PACKAGE WHERE GJAHR GE '2007'.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = LS_PACKAGE-BUKRS.
IF SY-SUBRC <> 0.
   APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
CLEAR LS_PACKAGE.
ENDLOOP.
IF LT_DATAPACKAGE[] IS NOT INITIAL.
DESCRIBE TABLE LT_DATAPACKAGE LINES LI_NUM.
IF LI_NUM GT 0.
   REFRESH C_T_DATA.
   APPEND LINES OF LT_DATAPACKAGE TO C_T_DATA.
   REFRESH LT_DATAPACKAGE.
   FREE LT_DATAPACKAGE.
endif.
ELSE.
   REFRESH C_T_DATA.
ENDIF.
Please give me your valuable suggestions.
Thanks
Ganesh Reddy.

Hi Ganesh,
whatever you do, you can try like this:
1 - any code posted should be wrapped in \
then try something like this:
field-symbols:
<tabrec> type any,
<field>   type any.
sort ITZGLCCODE by bukrs.
LOOP AT C_T_DATA ASSIGNING <tabrec>.
ASSIGN component 'GJAHR' of structure <tabrec> to <field>.
check <field> <= 2007.
ASSIGN component 'BUKRS' of structure <tabrec> to <field>.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = <field>
    BINARY SEARCH TRANSPORTING NO FIELDS. "speed up the volume.
IF SY-SUBRC 0.
    MOVE-CORRESPONDING <tabrec> to LS_PACKAGE.
    APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
ENDLOOP.
Regards,
Clemens

How to increas the width of the Table in OBIEE Report

Hi ,
I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
Thanks
Govindan P

- you can increase the width of a column -> column format values -> Additional Formatting Options
increase the width:
- Report level:
result tab -> Click on Format container of Table -> Additional Formatting Options
u can assign value width : 500 height:.....
- dashboard level:
Edit options -> section -> Format section -> Additional Formatting Options
here also u can change the width
u can assign value width : 500 height:.....
pls mark it helps....
Edited by: 979481 on Feb 6, 2013 1:25 AM

How to delete the line for 300SAP* in table USR02 in SQL Management studio

Hello
I used to delete the line for 300SAP* in table USR02 in SQL Enterprise Manager. After I could log on with pass.
I wander how to delete it in SQL Management studio. When I expand tdatabase it takes so long time and it is uncontrollable

Hello,
you have to delete the row by a sql statement.
Open a new query and run a script like this:
use <Your SID DB> -- e.g. use PRD
setuser 'your sid in lowercase' --- e.g. setuser 'prd'
delete from USR02 where MANDT = '300' and BNAME = 'sap*'
go
Run a complete backup before deleting data manually.
Regards
Clas

How to select LAST line from a SAP table?

Hi developers,
I need to select the last line from a SAP table, NOT from an internal table.
Something like
SELECT SINGLE LAST FROM pa00169..
any help is more than welcome.

Javier,
Based on this statement from you:
"i created a Z table, its a config table that stores some bussines rules, and an id counter, so in order to update that counter i need the last line of the ztable."
I have one additional solution which is the "text box" approach IF the 'id counter' mentioned above is a numeric data type.
If so, use an SQL function to get the highest value of ID_COUNTER.
Then simply add one to it to produce a new, unique, higher-order primary key.
See below:
data: l_id_counter like ztable-id_counter.
data: new_id_counter like ztable-id_counter.
select max( ID_COUNTER ) from ztable into l_id_counter.
new_id_counter = l_i_counter + 1.
Now new_id_counter will be the unique, primary key IF this is the only field in ZTABLE's primary key.
This will also GUARANTEE that your new record is built correctly.

Mapping Line type Data to table data

Hi,
I am trying to refer to a data element present in the line type of a table type which belongs to an import parameter of a smartform. How will i access the data element to use in the where clause of a select statement.
For Eg:
Import Parameter name: PARTNER_H
TYPE: CRMT_OUTPUT_PARTNER_H_COMT (table type)
The line type attached to this table type is CRMT_OUTPUT_PARTNER_H_COM.
This line type is the structure that contains the data element that i need to use. the details are as below:
Component: RELATION_PARTNER
Component type: BU_PARTNER_GUID
I have written a select statement as below:
SELECT SINGLE * from BUT000 into I_FS_BUT000 where
PARTNER_GUID = PARTNER_H-RELATION_H.
I have given the input parameter as PARTNER_H.
It throws me an error that "PARTNER_H" is a table without a header line and therefore has no component called "RELATION_H".
Is this the correct way to access the data element?Please help.

Hi Neena,
Since PARTNER_H is an internal table it may have multiple values. If you want only a single entry from BUT000, you ll have to determine which entry from PARTNER_H you need in select query.
If it is always going to have only a single value then , this will work :
data: wa_partner_h type line of CRMT_OUTPUT_PARTNER_H_COMT.
Read table partner_h into wa_partner_h index 1.
if sy-subrc is initial.
SELECT SINGLE * from BUT000 into I_FS_BUT000 where
PARTNER_GUID = WA_PARTNER_H-RELATION_H.
endif.
Regards,
Arun

How to get the line type of a table type

Hi,
i want to indetify the line type of a table type dynamically in my program. how to do?
For example:
data: lv_ttype type type ROLLNAME value 'PRXCTRLTAB'.
how to identify line type of lv_ttype in the program.
Thanks,
johnney.

Hello Johnney,
try like this...
types: begin of ty_itab,
            matnr like mara-matnr,
            werks like marc-werks,
            maktx like makt-maktx,
          end of g_t_itab.
data: g_t_itab type table of ty_itab.
data: <b>wa_itab like line of g_t_itab.</b> " This is line type... so called work area.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.

After a PAI, I am not able to slect line items in the table control.

Dear All,
In GR55 Report;after a PAI triggered (by Enter button or vertical scroll bar), I am not able to select any line-items in the table control. If no PAI triggered, the I am able to select as much as line item..
Can anybody help me..
-Ullas U

before display, while debugging , after pai, it will go in pbo modules,
so there u need to check the structure screen for the variable select. u might have declare one variable like sel(1) type c,
these variable u have written in table control attributes in select variable as itab-sel.
so check in debugging first.

Line width on framemaker table

Similar Messages

Maybe you are looking for