Line with red blob
What is the line with a red marker on its left-hand end, in iCal's weekly view????
Hey Andy,
That is a time-of-day marker, I believe.
Similar Messages
-
Red line with matching red dot imovie 11
Hi All,
I'm just getting to know iMovie 11 and am now only baffled by a few things.. One of which is this red vertical line with a red dot that I sometimes make appear on the timeline... I'm not sure what it's for but would love to know! I've tried searching online to figure it out but I assume because I don't know what it's called, it's very hard to find anything about it...
Does anyone know what I mean and can you point me in the right direction of where to find out what it is and how it's used?
Thanks!I found a work around... If you copy and paste the video files into the events folder it adds them when you create a new project. I'm not really happy about doing it this way, but at least I can finish editing my clips
-
Red line with number 11 beside it
At the top right of my screen of my 8520 I have a red line with the number 11 beside it any ideas what it is?
calspm wrote:
Well at first I got "Set Top box does not match the account settings" message, and then tried to reboot, but then got the "X". So maybe there is an account settings problem.
Click the ATT Uverse Care link in my signature, send the PM, explain your situation.
Include your account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply.
They can reset the error code that is causing your problems. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more -
Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar -
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
I am unable to drag any playlists to my ipod- the circle with red line through it shows up and precludes it from being accepted- what is up ?
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?
Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
Solo Button in Channel Strip with Red Line
Solo Button in Channel Strip with Red Line through it and it won't solo?
How'd it happen and how do you get rid of it?
Thanks!Try This----From the Manual
Logic Pro, Express: Solo Safe mode may not remain disabled for a particular channel strip
Symptoms
In certain projects, "Solo Safe" mode for a channel strip may enable each time you load the project, even after you disable it and save the project.
Resolution
When a channel strip in Logic is "Solo Safe", it remains audible, even when other channel strips are soloed. Solo Safe is indicated by a diagonal red line through the solo button on a channel strip.
You can manually toggle the solo safe status of a channel strip by Control-clicking its solo button. There are times when you may find that a particular audio channel strip in a project reverts to solo safe mode when you load the project, even after you manually disable solo safe. Here is why that may happen and steps you can take to prevent it from occurring.
A Logic project contains a special audio channel strip used for pre-listening to audio in the Sample Edit window, Audio Bin, and Loop Browser. When you create a Logic project from one of the factory templates, this channel strip is assigned to "Audio 256". This channel strip stays in solo safe mode so that you can always preview audio. The image below shows the channel strip for a new, empty project.
If there is no audio channel strip in a project assigned to "Audio 256", Logic will use the highest-numbered available audio channel for pre-listening. When the project is loaded, that channel strip will be put into solo safe mode. You may find this happens in older projects that you open in Logic 8, or in cases where you have deleted the "Audio 256" channel strip in a Logic 8 project. To prevent this from affecting channel strips you are using in a project's arrangement, follow these steps:
Choose Window > Environment.
From the Environment window menu, choose New > Channel Strip > Auxiliary. A channel strip will appear in the environment.
Select the channel strip. It will highlight.
In the Device parameter box in the upper left of the Environment window, click the arrows to the right of "Channel" and choose Audio > Audio 256 from the menu.
Select the text tool, click on the name below the channel strip and name it "Prelisten". -
BB 8100 nuked or battery with red slash line !!
HI my name is mustafa....Last year i was using my bb 8100 smartphone..i really liked it...its shape its model...Its a bb8100 maroon colour,..no 3g...orange company with oracle sku #:64768...
So what happened is that my bb was having a low battery & i turned it on..It was taking a long time to switch on,so i took out the battery..I charged it on my wall charger later i connected the battery to my bb 8100...It showed me a battery sign with red line on it...i thought the battery wasn't working so i was having an extra battery & used it but no luck it showed me the same sign....Then i searched & googled online & found out that my bb 8100 is nuked....My operating system is windows 7..I would like to know that is there any solution to bring my phone to live...really i liked it a lot....Any help would ve appreciated...Hi mustafa_jamesbond,
To resolve this issue with your BlackBerry® Pearl™ 8100 smartphone, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
For further instructions, please see the following KB article.
"How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
My screen just went haywire. The screen flickered with red strips vertically. I thought it was part of the game I was operating until the screen went black and a white strip illiminated at the top. I tried turning teh system off, but it would not allow me to turn it off. After about 5 minutes, I was able to turn it off. Anyone have this occur? The Ipad mini appears to be ok now.
I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3 -
6 lines of red error msgs when opening an InfoPackage
When I double click an infoPackage to open it, get to a window titled as "Execute Repeat Request"? with the following 6 lines of red msgs in the sequence as below (see in between two dashed lines):
Delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV is incorrect in the monitor
A repeat needs to be requested
Data target 0BBP_CON still includes delta request REQU_3ZHG7TK87O5T1A7W015I7HFBV
If the repeat is now loaded, then there could possibly be
duplicate data in the data targets
Request the repeat?
What could cause the problems and how to resolve them?
Thanks for everyone's input!hey Paolo,
I checked the short dump, but it seems not helpful. See below in between two dashed lines for the short dump msg:
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Occurred on 31.10.2005 at 00:02:12
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure "INSERT_ODS"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
How to correct the error
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "DbSlExeModifyDB6( SQLExecute ): [IBM][CLI
Driver][DB2/AIX64] SQL0289N Unable to allocate new pages in table space
"QDW#ODSD". SQLSTATE=57011 row=261"
Internal call code.........: "[RSQL/INSR//BIC/B0000432000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP3ZBWN7YYJYC54GT20I6UDDJ2Z " or "GP3ZBWN7YYJYC54GT20I6UDDJ2Z "
"INSERT_ODS"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
Details regarding the conditions under which the error occurred
or which actions and input led to the error.
What could be the reason?
Thanks -
Hi,
I am trying to implement drawing on canvas with two colors, red and blue.
For example, to draw with the mouse "with two colors".
I do not need a filled rectangle.
I am looking into gradient but without any success.
Is there a better way to draw a line with two colors?
I also tried to use BasicStroke, but the line had an inner/outer strokes.
Please help with suggestions.devboris wrote:
..For example, to draw with the mouse "with two colors".
import java.awt.*;
import javax.swing.*;
class GradientLine {
public static void main(String[] args) {
GradientPanel gp = new GradientPanel();
gp.setPreferredSize( new Dimension(600,400) );
JOptionPane.showMessageDialog(null, gp);
class GradientPanel extends JPanel {
public void paintComponent(Graphics g) {
// cast the Graphics objkect to a Graphics2D object
// (G2D includes setPaint() method)
Graphics2D g2 = (Graphics2D)g;
GradientPaint bgPaint = new GradientPaint(
0,
0,
Color.black,
getWidth(),
getHeight(),
Color.white );
g2.setPaint(bgPaint);
g2.fillRect( 0, 0, getWidth(), getHeight() );
GradientPaint fgPaint = new GradientPaint(
0,
0,
Color.yellow,
getWidth(),
getHeight(),
Color.red );
// set the paint to a gradient.
g2.setPaint(fgPaint);
for (int ii=0; ii<getWidth()/10; ii++) {
g2.drawLine( ii*10, 0, ii*10, getHeight() );
for (int ii=0; ii<getHeight()/10; ii++) {
g2.drawLine( 0, ii*15, getWidth(), ii*15 );
} -
my i-pod nano 3rd generation dislpay has lines and black blobs what do i do?, my i-pod nano 3rd generation dislpay has lines and black blobs what do i do?
Work through the usual 5 R's of troubleshooting to rule out the possibilty of a software glitch/issue or data corruption.
http://www.apple.com/support/ipod/five_rs/
If none of them take care of it, it's more than likely a hardware problem with the Nano's LCD display in which case you'll need to either take or send your iPod in for repair either through Apple or a third party service.
B-rock -
Problem with displaying BLOB images on JSP page using a servlet
hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
BLOB blob=null;
rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
while (rset.next())
blob=((OracleResultSet)rset).getBLOB(2);
response.reset();
response.setContentType("image/jpeg");
response.addHeader("Content-Disposition","filename=42.jpeg");
ServletOutputStream ostr=response.getOutputStream();
InputStream istr=blob.getBinaryStream(1L);
int size=blob.getBufferSize();
int len=-1;
byte[] buff = new byte[size];
while ((len=istr.read( buff ))!=-1 ) {
ostr.write(buff,0,len);
response.flushBuffer();
ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : )
Maybe you are looking for
-
Hi all, I need the last run date of each Discoverer report with the user name of who created the report. The following SQL does this, but the Last_Run date shows the same for each report which is wrong. If I run the SQL that shows me the last run dat
-
I need sherlock and Front Row 1.3.1 Back! New Front Row is USELESS!
I need sherlock back, I used it all the time, now its missing! , also the old Front Row 1.3.1 was AMAZING, the new one looks really bad and the fonts are too small to use from far away (as what it was intended for) I used it before now its just to ha
-
Trouble Downloading Movies Help?!?!?
I got a macbook in June for a Grad gift and whenever i try to download any movies is opens up just as like a rich text format or something. How do i solve this problem?
-
Having made the transition from Word to ID CS4, one of the things I miss most is the ability to select multiple text instances (by holding down Ctrl as you select them with the mouse). Or is this possible in ID CS4 via an alternative route?
-
hii friends, i have written this bdc program to upload the address data from flat file to the sap system but whenever i process the session i get the result like W_MAT-NAME,W_MAT-STREET etc instead of the data in the flat file. i have pasted my progr