Lines from another table copy

Hallo,
I have to solve the following job:
Copy all lines with a column value from "f_hour> in 2000" from the table CAR in the table CABC.
The table CABC contains the columns "prod", "typ", "ser_nr" and *"rep_date"* with the same suitable data types like the table CAR.
Use for copying a subquery.
The clause to the insertion of a line in the table CABC should contain the column list "prod", "typ", "ser_nr".
The table CAR has the following columns:
"prod", "typ", "ser_nr", "f_hour", *"purch_date"*.
Thank you in advance.

Hi,
This example, using the scott.emp table, should show you how to do what you want.
Say you have a table that has some of the same types of data (not necessarily the same column names or other details):
CREATE TABLE     new_emp
(     emp_num          NUMBER (4)     PRIMARY KEY
,     ename          VARCHAR2 (15)
,     tax_id          NUMBER (9)
,     sal          NUMBER (7, 2)
,     date_entered     DATE
);Now say you want to copy the empno, ename and sal columns of scott.emp into this new table, but only for the rows where sal > 1000.
In all cases, date_enetered will be the time you run the INSERT statement, and the tax_id column is to be left NULL for now.
Here's how to do that:
INSERT INTO new_emp (emp_num, ename, sal, date_entered)
       SELECT           empno,     ename,     sal, SYSDATE
       FROM           scott.emp
       WHERE           sal     > 1000
;

Similar Messages

Link always the first 5 lines from another table, even after a reorder. How

Hello,
I'm creating my own expenses sheet based on the Numbers built-in model. I've about 15 categories and like to show only the top 5 and summarize the rest as other to plot a pie chart.
My idea was to create a new table called Top 5 Expenses with 6 rows, set the order of Expenses by Category table to greater expenses amount first, and on the Top 5 table I'd link the first row with the first row of Expenses by Category. This is pretty easy, just put = and click on the desired cell, but when I reorder the Expenses by Category table the link is updated to keep pointing to the old most expense category.
This is an example:
Expenses by Category
Home - $1000.00
Car - $500.00
Games - $130.00
Computer - $120.00
With this data a Top 3 table would be
Home - $1000.00 (= Expenses by Category :: A1)
Car - $500.00 (= Expenses by Category :: A2)
Games - $130.00 (= Expenses by Category :: A3)
But if I add a new transaction to Computer and it now gets the 3rd position, after a reorder the table is:
Expenses by Category
Home - $1000.00
Car - $500.00
Computer - $180.00
Games - $130.00
And the Top 3 became:
Home - $1000.00 (= Expenses by Category :: A1)
Car - $500.00 (= Expenses by Category :: A2)
Games - $130.00 *(= Expenses by Category :: A4)*
The Top 3 table isn't pointing to the 3rd line anymore. I've tried to set it to =Expenses by Category :: $A3, =Expenses by Category :: A$3 and =Expenses by Category :: $A$3. But it always is updated to A4.
Is there a way to the Top table point to the 5 first lines?

Felipe,
That's a very interesting problem statement. Here's how I would proceed.
Add a Table with the sole function of computing the rank of each category, using SUMIF to do the totals for each category and RANK to determine the position. If you are concerned about what happens in the case of a tie score, we can talk about that later - there's a pretty easy solution.
In a third table, from which you will plot, use VLOOKUP to grab categories in the proper order, as determined by the RANK expression in the second table. Your sixth row, Other, will have the value of the total expenses less the sum of the other five, easy enough to write an expression for.
I'd be happy to fill in any details you need.
Jerry

Create table from another table including constraints

Hi,
Is there a way to create a table from another table including constraints.
CREATE TABLE COPY_EMP
as
SELECT *
FROM EMP
WHERE 1 =2 ;
This creates the table, but the constraints are not copied over.
I was reading about DBMS_REDEFINITION - can that be used for this scenario ?
Thanks!
Anand

>
I tried that, but the constraint names are posing a problem. And unfortunately our constraints are not named in a standard, so am finding it difficult to replace them.
Was just wondering if there were any simpler approach to this.
>
No - there isn't.
You will have to use new names for the constraints. That usually means extracting the DDL and manually changing the constraint names.

Create a new table from another table that exists ussing a stored procedure

Hi,
I want to know if is posibble to create a new table from another table that exists ussing a stored procedure. This new table is created from other table that exists in the DB.
(in the next code the table tbl1 exist into the schema of the DB, but temp_tbl1 does not exist, it must be created by the procedure)
create or replace procedute temp is
temp_tbl1 tbl1%TYPE; //the temp_tbl1 will have the same type of tbl1
begin
create table temp_tbl1 as (select * from tbl1);
end temp;
thanks very much

cat wrote:
Hello,
I think my problem is not about this grant, because if I execute this as an "anonymous procedure":
DECLARE
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE Abonus (id NUMBER, amt NUMBER)';
END;
It runs ok
But if I do:
CREATE OR REPLACE procedure temp as
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE Abonus (id NUMBER, amt NUMBER)';
END;
I have the error
ORA-01031: Insufficient privileges
ORA-06512: at "temp", line 3Anonymous blocks are treated as "Invoker's Rights" from a privilege perspective whereas stored programs by default are treated as "Definer's Rights". Therefore using anonymous blocks is not a valid test to check this.
The simplest form of checking this issue is by executing
SET ROLE NONE;and then to run your statement/code block in question interactively. Using this approach you get in your session the effective rights of a "Definer's Rights" stored program, i.e. only privileges that you got granted directly to your user.
You can revert to the default setting by issuing
SET ROLE ALL;For more information regarding this topic, read e.g. the documentation:
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/subprograms.htm#LNPLS00809
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Insert missing rows from another table

Hi
I need to insert rows from another table if there is gaps in my transaction table. For each ärendenr there should be 5 Id status rows (1-5). Except for the fact that the inserted rows never should have higher IdStatus number then the highest value from
the transaction for each Ärendenr. See my example below that illustrates my transaction table, Stages master and the desired result.
Is there some t sql code that could handle this problem?
Best regards
Arne
So far i have tried to solve this with the code below but it doesnt work.
I have copied the transaction file information to the TempLogTransTimes
and then insert into LogTransTimes
IF OBJECT_ID('dbo.TempLogTransTimes', 'U') IS NOT NULL --Här raderas den tillfälliga tabellen
DROP TABLE dbo.TempLogTransTimes;
SELECT *
INTO TempLogTransTimes
FROM LogTransTimes
DECLARE @TopÄrende INT
WHILE EXISTS(SELECT * FROM TempLogTransTimes)
BEGIN
SET @TopÄrende = (SELECT TOP(1) Ärendenr FROM TempLogTransTimes ORDER BY Ärendenr)
INSERT INTO LogTransTimes(Ärendenr, IdStatus, StatusNamn, SourceId)
SELECT @TopÄrende, SM.IdStatus, SM.StatusNamn, 'Beräkning'
FROM Statusmall SM
FULL JOIN TempLogTransTimes LT ON SM.IdStatus = LT.IdStatus
WHERE LT.IdStatus IS NULL
DELETE TempLogTransTimes WHERE Ärendenr = @TopÄrende
END
Arne Olsson

Hi Arne Olsson, try this..
DECLARE @Transactions TABLE
Id1 INT,
IdStatus INT,
StatusName VARCHAR(10)
DECLARE @Stages TABLE
IdStatus INT,
StatusName VARCHAR(10)
INSERT INTO @Transactions VALUES(1,1,'AA'), (1,3,'CC'), (1,5,'EE'), (2,1,'AA'), (2,3,'CC')
INSERT INTO @Stages VALUES (1,'AA'), (2,'BB'), (3,'CC'), (4,'DD'), (5,'EE')
;WITH CTE AS(SELECT DISTINCT Id1 FROM @Transactions)
SELECT Id1, IdStatus, StatusName FROM CTE, @Stages
EXCEPT
SELECT Id1, IdStatus, StatusName FROM @Transactions
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How To delete the Chosen line from the Table Control

Hi Friends,
i am new to Module Pool Programming , i developed a Table Control in input mode and i am getting data also into that table control. my requirement is that i want to delete the current chosen line from that table control. please help me out.

HI
GOOD
GO THROUGH THIS REPORT
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
      ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.
CHANGE THE CODE AS PER THIS LIGIC.
THANKS
MRUTYUN

How to populate a table based on a row selection from another table.

Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganesh

I understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps.

Looping delete statement where table name is coming from another table

Hi All,
We have to write code to delete records from active tables of WDSO.We have 5 DSO so inspite of writing delete statement for each table we want to put all table names into one table and then loop through it .but we are getting error when we are refering that table field which has active table name.error is :
"dictionary structure or table is either not active or does not exist "
As per my understanding in a delete /select /insert /update statement we need to put table name (whose field we are refering ) it can't be replaced by a variable .
ex: v_table = 'EMPLOYEE' .
DELETE FROMv_table WHERE EMP_NAME = 'ABDC' .
is wrong and it must be like
ex : DELETE FROM EMPLOYEE WHERE EMP_NAME = 'ABDC' .
but we want to make our code dynamic .
Can you please suggest a way so that we can read the table names from another table and delete data based on some selection fom those tables .
I tried variants ,perform etc and even searched FM for the same but not found a solution .Your help will be greatly appreciated .
Thanks in advance .
Regards,
Jaya

Hi,
You can change your statement as follows:
DELETE FROM (v_table) WHERE EMP_NAME = 'ABDC' .
However, I would not recommend this. There is a standard function module RSAN_ODS_DATA_DELETE which allows selective deletion - that should be a safer way to do this. You can

I can't create table from another table?

Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

xi`tin wrote:
Hi everyone!
I have a problem that I don't known the reason why?
I'm using Oracle version 8i and I want to create a table from another table, such as:You realize, of course, that 8i is completely out of support .... Is your OS and hardware just as old as your rdbms software, or is it only the rdbms that your company refuses to upgrade?
     CREATE TABLE a_backup as SELECT * FROM a => It's OK, table a_backup is created.
But there is only a table that I can't created like that, such as:
     CREATE TABLE b_backup AS SELECT * FROM b;
When I run over command, SQL Plus is not responding... and clients are can't access to DB or Executing forever
This is the first time I met this problem.
Can Anyone help me to resolved it?
Thanks in advance!

INSERTING INTO A TABLE FROM ANOTHER TABLE

Hi,
I am having a table called emp in which 5 columns are there, I want to insert some rows from another table called employees, only into three columns of emp table through a sub query.
Is this scenario is possible, I tried so many queries but it is not working out.
Can any body help me out.
The columns in emp table is
empno, ename, doj, designation, salary, deptno, mgrid
The columns in employees table is
empno, name, hiredate, post, salary, commission, deptno, mgr
I want to insert into empno, ename, doj, designation columns of emp table from the employees table empno, name, hiredate, post columns.
Ramesh.

It looks like your EMP table has 7 columns, not 5, and you want to insert into 4 columns, not 3.
insert into emp
(empno, ename, doj, designation)
select empno, name, hiredate, post
from employees;

FETCHING VALUES IN MULTI RECORD BLOCK FROM ANOTHER TABLE USING SELECT STATEMENT.

Hi,
I have one multi record block in which i want to fetch values
(more then one record) from another table using select statement
IN KEY NEXT ITEM.I am getting following error.
ORA-01422: exact fetch returns more than requested number of rows
Thanks in advance.

In your case I see no reason to use non-database block and to try to populate it from a trigger with a query, instead of using the default forms functionality where you can associate the block and the fields with table, create where clause using bind variables and simply use execute_query() build-in to populate the block. The power of the forms is to use their build-in functionality to interact with the database.
Also, you can base your block on a query, not on a table and you dynamically change this query using set_block_property() build-in. You can use any dynamic queries (based on different data sources) and you simply need to control the column's data type, the number of the columns and their aliases. Something like creating inline views as a block data source.
However, you can replace the explicit cursor with implicit one like
go_block('non_db_block_name');
first_record();
FOR v_tab IN (SELECT *
FROM tab
WHERE col_name = :variable)
LOOP
:non_db_block_name.field1 := v_tab.col1;
:non_db_block_name.field2 := v_tab.col2;
next_record();
END LOOP;

SQL select a concatination of entries from another table

I am trying to select a few columns from one table and then add another column that is a concatination or names from another table that referances it as below. Is this possible to do in one select statement?
table x1
ID NAME
1 Bob
1 Tom
2 Bill
table x2
ID NAMES
1 Bob, Tom
2 Bill
3

You mean string aggregation?
If yes, then it is possible like this, if you are on 10g.
SQL> create table x1 (id,name)
2 as
3 select 1, 'Bob' from dual union all
4 select 1, 'Tom' from dual union all
5 select 2, 'Bill' from dual
6 /
Tabel is aangemaakt.
SQL> select id
2       , rtrim(n,', ') names
3    from ( select id
4                , n
5                , rn
6             from x1
7            model
8                  partition by (id)
9                  dimension by (row_number() over (partition by id order by null) rn)
10                  measures (cast(name as varchar2(20)) n)
11                  rules
12                  ( n[any] order by rn desc = n[cv()] || ', ' || n[cv()+1]
13                  )
14         )
15   where rn = 1
16 /
        ID NAMES
         1 Bob, Tom
         2 Bill
2 rijen zijn geselecteerd.There are several other (slower) techniques possible as well. You can find them by using the search function on this forum.
Regards,
Rob.

Getting description of product from another table

Hi,
I am getting the level from the user, and based on that creating an internal table. I am getting product code (PRODH) and level (STUFE) from one table (T179), and getting product description (VTEXT) from another table (T179T). I need to create a single internal table (PVS) with all three fields.
How do I do that? This may seem like a very simple question, but I have only been teaching myslef ABAP for about one week.
Once I can prepare this table, I will use a function to display it.
Regards,
Al Lal
Code:
REPORT YABHINAV16.
program to display products at chosen level *
Tables: T179, T179t.
types: begin of hierarchy,
        prodh type t179-prodh,
        vtext type t179t-vtext,
        stufe type t179-stufe,
        end of hierarchy.
data: pvs type standard table of hierarchy initial size 0.
select-options level for t179-stufe no intervals.
Select prodh stufe from T179 into corresponding fields of table pvs where stufe in level.
select vtext from t179t into corresponding fields of table pvs where prodh = pvs-prodh.
sort pvs by prodh.

Hi Just change the code accordingly...
Tables: T179, T179t.
types: begin of hierarchy,
prodh type t179-prodh,
vtext type t179t-vtext,
stufe type t179-stufe,
end of hierarchy.
types: begin of text,
         prodh type t179t-prodh,
         vtext type t179t-vtext,
         end fo text.
data: pvs type standard table of hierarchy initial size 0.
data: it_text type standard table of text,
        wa_text type text.
select-options level for t179-stufe no intervals.
start-of-selection.
Select prodh stufe from T179 into corresponding fields of table pvs where stufe in level.
select prodh vtext from t179t into corresponding fields of table text for all entries in pvs where prodh = pvs-prodh.
end-of-selection.
sort pvs by prodh.
sort it_text by prodh.
loop at pvs.
read table it_text into wa_text with key prodh = pvs-prodh.
if sy-subrc eq 0.
pvs-vtext = wa_text-text.
endif.
modify pvs.
endloop.
Award Points If useful

UPDATING A TABLE WITH SAME INFO FROM ANOTHER TABLE ON THE SAME DB

0down votefavorite
I am trying to update a table with info from another table on the same db with same table name. I just want the info to be the same , no primary key or constraint involve just a straight replacement of records and I keep getting errors WITH THE TABLE not
being recignize. below is my query:
UPDATE
VNDFIL
SET EOBTYP
= VNDFIL.EOBTYP,
EDI_X12_835_VERSION = VNDFIL.EDI_X12_835_VERSION
FROM
AGERECOVERY
WHERE
VNDFIL.EOBTYP
= VNDFIL.EOBTYP
AND
VNDFIL
.EDI_X12_835_VERSION
= VNDFIL.EDI_X12_835_VERSION

Hi rotary,
If those two same named tables are in the same database then they have to be in different schemas. If you mean they are in the same server instance, then they may be in different databases, besides the "table not being recognized" error,
anyway you should use the fully qualified table names, that is database.Schema.Table(If across instances, ServerName should be prefixed) to avoid the table unrecognized error.
Using Identifiers As Object Names
With the fully qualified names, your update statement can be like below.
UPDATE
db1.schema1.VNDFIL
SET EOBTYP = srcTbl.EOBTYP, EDI_X12_835_VERSION = srcTbl.EDI_X12_835_VERSION
FROM
db1.schema2.VNDFIL srcTbl
WHERE
db1.schema1.VNDFIL.EOBTYP = srcTbl.VNDFIL.EOBTYP AND
db1.schema1.VNDFIL.EDI_X12_835_VERSION = srcTbl.VNDFIL.EDI_X12_835_VERSION
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Default value from another table - sql query

I'm trying to make the default value of a text item as the result from an sql or pl/sql statement. I keep getting errors when I try to use a pl/sql statement to do this. Has anyone else done this?

OK, here is what I tried to put in. I have a form and I wanted to add a text field that is derived from another table, such as:
select question from qa_main where seq=:quest_num
So, what I want is to have a form where questions on tests are answered, and I want the text of the question to be brought over from the question table. I'm not sure if I'm using the correct syntax, but the ":quest_num" would be a reference to a question number in the answer table that is linked to the sequence number (primary key) in the questions table.
Of course if there are better ideas, please let me know. :)

Lines from another table copy

Similar Messages

Maybe you are looking for