Lines in layoutset

Hi Gurus,
GM. will you please help me out for the following object which is related to 4" by 6" sap script lable printing by using Zebra printer.I need to draw the horizontal lines and vertical lines in the lay outset.I tried with the following commands, but nothing was displayed.
<b>/    ^XA
/    FO50,200GB200,200,2^FS
/    ^XZ</b>
Definitely points should be awarded. Please provide me your valuable suggestions. Looking forward for your co-operation.
Regards,
Ravi.

to avoid zig zag u can set the variable length by &wa_temp-field(8)&
by using : (length) u can restrict length of display to avoid zig zag & specify max length for that variable to avoid truncation & adjust all columns accordingly.
reward points if helpful

Similar Messages

Schedule line item data missing in Purchase order form in ECC6.0

Hi All,
We are doing ECC6.0 upgradation project . I am trying to print Purchase order in ECC6.0 , all data is coming fine in PO except schedule line item data is missing.
Same print program and form works fine in 4.7E but schedule line item data missing in ECC6.0.
Print program is a copy of standard SAP program SAPFM06P and layoutset is a copy of MEDRUCK.
If anyone knows if there is any OSS note for the standard print program or any solution please let me know.
Thanks,
Sonali.

Resolved on own.

Using SQVI to generate report of open and released delivery schedule lines

All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.

Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi.

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

IF Statement in Join Line

Is it possible to use a IF statement (i.e. CASE, DECODE) in the Join Line?
I need create a query that depending on the value of a column it will determine if I use a column A or column B in my join statement. I was thinking something like the following:
Select a.Value1, a.Value2, b.ColumnA, b.ColumnB
FROM Table1 a
INNER JOIN Table2 b ON a.Value2 = (if b.ColumnZ='Dept' then b.ColumnA else b.ColumnB END)
Oracle Version 10g
OS Windows XP
Thanks in advance!

Hi,
Remember what a CASE expression does: it returns a single value in one of the SQL data types (such as VARCHAR2, NUMBER or DATE).
Each THEN (or ELSE) clause of a CASE expression references something that the CASE expression might return, so after each THEN (or ELSE) keyword there must be a single value in one of the SQL data types.
So you can't say:
case tdsi.level_code
     when 'L' then tdsid.privilege_code = tdlm.location_code
     when 'R' then tdsid.privilege_code = tdlm.region_code
     when 'C' then tdsid.privilege_code = tdlm.country_code
endWhat is the data type being returned? "tdsid.privilege_code = tdlm.location_code" is not a single value in any of the SQL data types.
If location_code, region_code, country_code and privilege_code all have the same data type, then you can do something like this:
join      dirpipe.dirpipe_location_map      tdlm      on      case tdsi.level_code
                                        when 'L' then tdlm.location_code
                                        when 'R' then tdlm.region_code
                                        when 'C' then tdlm.country_code
                                   end     = tdsid.privilege_code

What is" LINE-COL2 = SY-INDEX ** 2."

can u explain what is '' ** "
FIELD-SYMBOLS <FS> LIKE LINE OF ITAB.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2. "what this will do
APPEND LINE TO ITAB.
ENDDO.

Hi sunil,
1 ** means "To the power of"
2. eg. 5 ** 2 = 25
(5 To the power of 2 = 25)
regards,
amit m.

Header information not getting displayed in the lines

Hello Everyone
I have a very basic question - its very simple but not working for me with so many attempts
My XML structure looks like this . In the RTF , I have header information and then a table for line information looping through G_LINES.
IN this lines table I need the SHIP_CUSTOMER_ID of the header to be displayed. I have tried all options like <?../SHIP_CUSTOMER_ID?> or <?../G_ORDERS/SHIP_CUSTOMER_ID?> , however nothing seems to be working and I am not getting the field to be displayed. Can someone please help?
XML structure is as follows:
<XXSTOL_29251_PICK_TKT>
<LIST_G_ORDERS>
<G_ORDERS>
<CUSTOMER_NUMBER>1411</CUSTOMER_NUMBER>
<SHIPPING_INSTRUCTIONS1></SHIPPING_INSTRUCTIONS1>
<SHIP_CUSTOMER_ID>256</SHIP_CUSTOMER_ID>
<G_LINES>
</G_LINES>
<G_LINES>
</G_LINES>
</G_ORDERS
</LIST_G_ORDERS>
</XXSTOL_29251_PICK_TKT>

Are you grouping within G_LINES? If so, use ../../SHIP_CUSTOMER_ID
or send me the xml and RTF template to [email protected] so that I can get a better look at the data structure and try to help.
Thanks,
Bipuser

ArrayList e .RangeCheck(int)line 546

Hi guys I am working on this project
in few word
I have to draw different shape on a panel
moreover when two similar shapes collide ( 2 circles ) they make a bigger circle
when st change direction
almost everything works
import java.awt.Graphics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.Comparator;
import java.util.Iterator;
import javax.swing.JPanel;
class ShapePanel extends JPanel implements ActionListener {
     private static final long serialVersionUID = 1L;
     public static ArrayList <Shape>shapes;
     private javax.swing.Timer animationTmr;
     int speed;
     PlaySound audioClip = new PlaySound();
     private float heigth;
     private float width;
     private int shape1;
     private int shape2;
     public ShapePanel() {
          shapes = new ArrayList<Shape>();
          animationTmr = new javax.swing.Timer(80, this); //interval, ActionListener
          animationTmr.start();
     public ArrayList<Shape> getShapes()
          return shapes;
     public void addSquare(int x, int y,int w,int h, int shapeType) {
          shapes.add(new Square(this,x, y,width, heigth, shapeType));
          repaint();
          System.out.println(shapes.size());
     public void addCircle(int x, int y,int w,int h, int shapeType) {
          shapes.add(new Circle(this, x, y,width, heigth, shapeType));
          repaint();
          System.out.println(shapes.size());
     public void addRectangle(int x, int y,int w,int h, int shapeType) {
          shapes.add(new Rectangle(this, x, y,width, heigth, shapeType));
          repaint();
          System.out.println(shapes.size());
     public void addStar(int x, int y,int w,int h, int shapeType) {
          shapes.add(new Star(this, x, y,width, heigth, shapeType));
          repaint();
          System.out.println(shapes.size());
     public void paintComponent(Graphics g) { //called Whenever panel needs
          super.paintComponent(g); //re-displaying:
          Iterator<Shape> it = shapes.iterator(); //Iterate through Balls calling
          g.setColor(Menu.getColor());
          g.fillRect(0, 0, this.getWidth(), this.getHeight());
          while (it.hasNext()) { //each one's paint method
               it.next().paint(g);
     public void actionPerformed(ActionEvent ev) {
          //On timer tick,
          Iterator<Shape> it = shapes.iterator(); //Iterate through Balls calling
          while (it.hasNext()) { //each one's updatePos() method
               it.next().updatePos();
          checkTypeCollision();
          handleCollision();
          repaint();
    private void checkTypeCollision()
          //we iterate through all the balls, checking for collision
          for(int i=0;i<shapes.size();i++)
               for(int j=0;j<shapes.size();j++)
                         if(i!=j)
                              if(collide(shapes.get(i), shapes.get(j)))
                                        shape1=shapes.get(i).shapeType;
                                        shape2=shapes.get(j).shapeType;
                                         if(shape1==shape2)
                                         /*     int     newX = (int) ((shapes.get(i).getCenterX() + (shapes.get(j).getCenterX()/2))/2);
                                              int newY = (int) ((shapes.get(i).getCenterY() + (shapes.get(j).getCenterY() /2))/2);
                                             float newWidth =   shapes.get(i).getWidth()+(shapes.get(j).getWidth()/2);
                                             float newHeigth = shapes.get(i).getHeigth()+(shapes.get(j).getHeigth()/2);
                                             int newShapeType = shapes.get(i).shapeType;
                                                   if(shapes.get(i).getShapeType()==1)
                                                        shapes.remove(j); //remove shape element at j
                                                        shapes.remove(i); //remove shape element at j
                                                        System.out.println("SIZE IS==="+     shapes.size());
                                                        System.out.println("newx====="+newX);
                                                        System.out.println("newy====="+newY);
                                                        System.out.println("newWidth====="+newWidth);
                                                        System.out.println("newx====="+newHeigth);
                                         //               shapes.add(new Rectangle(this,newX,newY,530,530,newShapeType));
                                                        System.out.println("SIZE IS==="+     shapes.size());
                                                   //     repaint();
                                                   if(shapes.get(i).getShapeType()==2)
                                                        shapes.remove(j); //remove shape element at j
                                                        shapes.remove(i); //remove shape element at j
                                              //          shapes.add(new Circle(this,newX,newY,newWidth,newHeigth,newShapeType));
                                                   //     repaint();
                                                   if(shapes.get(i).getShapeType()==3)
                                                        shapes.remove(j); //remove shape element at j
                                                        shapes.remove(i); //remove shape element at j
                                                        shapes.add(new Square(this,newX,newY,newWidth,newHeigth,newShapeType));
                                                   if(shapes.get(i).getShapeType()==3)
                                                        shapes.remove(j); //remove shape element at j
                                                        shapes.remove(i); //remove shape element at j
                                                        //shapes.add(new Star(this,newX,newY,newWidth,newHeigth,newShapeType));
                                                   //     repaint();
     private void handleCollision()
          //we iterate through all the balls, checking for collision
          for(int i=0;i<shapes.size();i++)
               for(int j=0;j<shapes.size();j++)
                         if(i!=j)
                              if(collide(shapes.get(i), shapes.get(j)))
                                    shapes.get(i).hit(shapes.get(j));
                                   shapes.get(j).hit(shapes.get(i));
     boolean collide(Shape b1, Shape b2)
          double wx=b1.getCenterX()-b2.getCenterX();
          double wy=b1.getCenterY()-b2.getCenterY();
          //we calculate the distance between the centers two
          //colliding balls (theorem of Pythagoras)
          double distance=Math.sqrt(wx*wx+wy*wy);
          if(distance<b1.shapeSize)
               audioClip.playRectangle();
               return true;
               else return false;
     public static int vectorSize()
          return shapes.size();
}the drawing stops and
i have this error after a while
arrayList<e>.RangeCheck(int)line 546
moreover it doesn t draw a bigger shape as i want with the line
shapes.add(new Circle(this,newX,newY,newWidth,newHeigth,newShapeType));
                                                   help please the deadline is Tomorrow;

Exception in thread "AWT-EventQueue-0" java.lang.IndexOutOfBoundsException: Index: 4, Size: 4
     at java.util.ArrayList.RangeCheck(ArrayList.java:546)
     at java.util.ArrayList.get(ArrayList.java:321)
     at ShapePanel.checkTypeCollision(ShapePanel.java:156)
     at ShapePanel.actionPerformed(ShapePanel.java:77)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
it doesn t compile because is part of a bigger project

F4IF_INT_TABLE_VALUE_REQUEST - how can I return all values from the line?

Hi,
I'm using FM F4IF_INT_TABLE_VALUE_REQUEST to show a pop-up with my internal table values. The internal table has 3 fields, ATINN, ATZHL and a description field ATWTB. ATINN and ATZHL are needed to complete the unique table key, however this FM will only return the value of one field in any line I select.
How can I see all the values in the line I select in the return table?
My code is as follows:
DATA: tbl_cawnt LIKE cawnt OCCURS 0,
        wa_cawnt LIKE cawnt,
        BEGIN OF tbl_list OCCURS 0,
          atinn LIKE cawnt-atinn,
          atzhl LIKE cawnt-atzhl,
          atwtb LIKE cawnt-atwtb,
        END OF tbl_list,
        wa_list LIKE tbl_list,
        tbl_return LIKE ddshretval OCCURS 0,
        wa_return LIKE ddshretval,
        tbl_fields LIKE dfies OCCURS 0,
        tbl_dynp LIKE dselc OCCURS 0.
REFRESH: tbl_list, tbl_cawnt.
SELECT atinn atzhl atwtb
    FROM cawnt
    INTO CORRESPONDING FIELDS OF TABLE tbl_cawnt
    WHERE spras EQ sy-langu.
LOOP AT tbl_cawnt INTO wa_cawnt.
    CLEAR wa_list.
    MOVE: wa_cawnt-atwtb TO wa_list-atwtb,
          wa_cawnt-atinn TO wa_list-atinn,
          wa_cawnt-atzhl TO wa_list-atzhl.
    APPEND wa_list TO tbl_list.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ATWTB'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      value_org       = 'S'
    TABLES
      value_tab       = tbl_list
      return_tab      = tbl_return
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks!

Hi,
Use the structure DYNPFLD_MAPPING
With this internal table you can easily define that you want to return
other columns of the hit list in addition to field RETFIELD to the
screen.
In this IT you can MAP the screen fields to the serch help screen fields this has three fields
FLDNAME this is the field anme from the search help
FLDINH This has to be blank which would be field with the field value that you want to map
DYFLDNAME THis is the screen field name.
So here you can get the values for the other fields that you want which are on the search help just populate the name of the fields in FLDNAME.
Regards,
Himanshu

IMac 10.4.11 Because permanent vertical lines have appeared on my screen, I need to get a new monitor. The adapter apple sells goes from female VGA to mini-DVI. What kind of cable should I get as well:female to male?

If I use an adapter (female VGA to mini-DVI) for my iMac 10.4.11 OSX, I also need a cable. Should that cable be female VGA to male VGA?
Permanent vertical lines have appeared on my display, and connecting to another display (monitor) requires a cable and adapter. I want to be sure I am purchasing the correct cable for the Apple adapter.

What made me think I need to format if I upgrade the OS?
I just presumed so really.
What made me think I need to constantly format computer with my problem?
Well, after many attempts to repair the drive, which fails, cannot even reach the log in screen, I am left with no other choice?
And also, I have to note now, System Preferences keeps crashing without reason, it either takes ages to load, just by clicking it to open, or clicking something within it, or it just crashes.
And temporarily, it freezes the computer totally, with no response.
Seriously, am I missing a system file or something? Anyone experienced this problem before?
My computer is literally a blank computer right now, installed VLC and Shades, updated Adobe Flash Player, installed Skype and Adium. I would say Growl from Adium caused it, but it has happened prior to Skype and Adium. Any ideas anyone?
Thanks,
From Lelouch

Vendor Line Item not cleared after F110

Hi Gurus,
We encountered an issue. The payment run was processed last April 18 and the vendor invoices were captured during the payment run and in the aging report, these invoices didn't appear as Open Item.
In between April 19 until August 19, these invoices are not part of the proposal list until the when they run payment on August 20. The value is zero and in the proposal list, there is a value in the Reason to Print Advice "A".
What is the reason for this?
Thank you.

Hi Dianne Obviar,
For that invoice payment delete uncompleted payment
proposal.
U go through this path select F4 in run date field
There check it any un completed proposal is there and delete
that invoice line item will come for payable
Regards
Surya

Open Item and Line Items are not matching

Hi Gurus,
I ran the EFT for vendor #1600109 for payment on 10/18/07. If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403).
When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403).
User wants the open item report should tally the line item display.
I will assign good points.
Thanks for your help
Prashanth

Hi Gurus,
EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
Clearning date is 18th
Posting Date is 15th.
Thanks
Prashanth

Urgent - "Vendor balances carried forward and line items report."

Hello,
Is there any report which will give me the vendor balance carried forward and the line items during that period.
==============================================
Format-
eg: statement taken from 1.8.2006 to 30.9.2006 is required as
Bal b/f 25000 cr.
3.8.2006 Purchase Inv XXX 3000 cr.
5.9.2006 Payment Chq XX 26000 dr.
Bal c/f 2000 cr.
==============================================
Please advise on this.....
Regards,
J

thanks for the response, but i have already tried those transactions.
FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to be in the format given above..
like say, account statement.
Please advise............
Regards,
J

Report for bom wise target and actual cost as well as qty at line item

Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RK

Dear experts,
I am still looking for a revert.
regards
RK

Standard report for Open Orders & JIT lines

Hi,
I need a standard report that will list out all open Purchase Orders and All Open JIT lines for a Supplier for Perticular plant.
Is there any standard report that can pull this data.
Regards
Sandeep

Use ME2M / ME2N and ME2L reports with selection parameters WE101 and scope of list EINT

Lines in layoutset

Similar Messages

Maybe you are looking for