Lines in the file when I scan with the ADF in the Image Class MF4770

Hi.
I am the owner of a Mulifunction Printer Canon MF4770 Image class.
When I scan a document using the ADF, I get two lines along all the page digitalized.
Is there any way to clean the ADF scaner?
why do i get this line in the file ?
I attached an example in order to you can see what I'm trying to explain.
Regards

[topic moved to Reader Touch subforum]

Similar Messages

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

I get about 1 minute silence at the beginning of the file when I bounce it.

I get about 1 minute silence at the beginning of the file when I bounce it.

Does this overwrite the music you have recorded? Or does it just insert 1 minute of silence and then play everything starting at measure 1?
Before you go to bounce the file 1) make sure the cycle is turned off in the transport window and 2) make sure no regions are selected. When you go to bounce it, check what the start and end times are.
Make sure the start time is 1-1-1-1.
Hope this helps!

How to sent importet RAW files into the cloud? The files was importet from Canon EOS via camera adapter to the iPad. The Files was stored in the folder importet. But the files does not sync with photostream.

How to sent importet RAW files into the cloud? The files was importet from Canon EOS via camera adapter to the iPad. The Files was stored in the folder importet. But the files does not sync with photostream.

Welcome to the Apple community.
Only photos taken on the iOS device and after photo stream was enabled will be added to photo stream.

I can no longer print PDF files that were scanned with the very same MX479 on Windows XP, SP3

I can no longer print PDF files that were scanned with the very same MX479 All-in-One.
I have an (obsolete) Windows XP, SP3 computer. Obviously, no updates from Microsoft
have occurred that might have impacted my Canon Pixma MX479.
When I attempt to send 1 or more pages from a PDF file to the printer, I don't even get the
Canon PIXMA popup that would allow me to cancel the print job.
Yet the Print Queue icon appears in the lower right corner of my monitor.
If I view the Print Queue, the print queue shows "spooling" and does nothing more.
If I attempt to CANCEL the print job in the Print Queue, it simply changes to "deleting -
spooling".
I cannot cancel the print job that shows NOT RESPONDING via Task Manager, either.
In fact, the only way the Print Queue icon disappears is if I totally reboot my computer!
"Luckily", I can still print e-mails, Word documents, and even my downloaded PDF of my
bank statement.
So, I was thinking that it was *only* PIXMA'S OWN SCANNED PDFS that could not be
printed ON THE SAME PIXMA 479.
However, I have since realized that I also cannot print USPS Signature Proof of Delivery
PDFs that I received from USPS via e-mail.
So why can I print *some* PDF files, but not *all* PDF files, like I previously could do?
THESE SCANS ARE OF LEGAL DOCUMENTS, SO I WILL LIKELY HAVE TO E-MAIL
THE REQUISITE, PREVIOUSLY SCANNED PDFS TO FEDEX TO PAY FOR *THEM*
TO PRINT THEM.
NOTE: I *have* tried turning the PIXMA off, unplugging it, rebooting the computer, plugging
the PIXM in and restarting the PIXMA - still no ability to print PIXMA-scanned PDFs.
And, I find it very strange that e-mails, Word documents, and some other PDFs print with
no problem "around" "NOT RESPONDING" PIXMA print jobs.
I have owned Canon printers for years, including the MX420, and the MX340.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now.

My 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help.

my 3 year-old macbook pro is very slow. I have run disk utility and virus scan with no improvement. The "beach ball" will spin for minutes at a time when opening, closing or changing windows. Apple Store looked at it a few months ago with no help. What can I do?

Under CPU: 3.5% user; 5% system; 91% idle; 441 threads; 90 processes.
Under System: out of 2GB - 54.7MB free; 530MB wired; 603MB active; 862MB inactive; 1.95GB used.
Is too much of the system memory tied up? If so, what can I do to free some up?

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

How can I get iTunes to automatically find the file for songs marked with ! without manually doing each one?

Ok, we've had a problem with our external hard drive which holds all of our music files (our H drive). It's the 2nd time going down and we're just chalking it up as a failure. Fortunately, we had it all backed up onto another external hard drive (our G drive). We re-did iTunes back in February (bringing all the files in, sorting, playlists, etc) after fixing it the first time. So I have that exact files from then (on the G drive) minus a new CD or two, nothing major. But when I open that iTunes library, it doesn't find the music that is connected to it - even though all the music is in the folder connected to the library (all in G drive). I'm not sure if this file is still trying to look for my H drive folder.
I found a previous question asked on here about the ! songs. I brought in all the music from the iTunes/Music folder. So of course, I have double now. I would just go delete all the rest - except for this. What about my playlists?? I don't really want to recreate each one manually. I have also adjusted a ton of info in iTunes over the years to make things easier (fixed spelling when it brings it from a CD wrong, etc). That brings me back to wondering if I could have iTunes automatically search for its own file instead of me doing it for 7,500+ songs.
Any ideas?? Or am I just stuck doing a lot of work?
Thanks!

If what is on the G: drive is a mirror of what was on the H: drive, then get Windows to change the drive letter of G: to H:
If a simple fix isn't forthcoming then my FindTracks script should be able to reconnect the missing tracks to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations. For more details see this thread.
tt2

How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?

Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Could not complete your request the file is not compatible with this version of Photoshop.

User has been working on a photoshop document for a whole day, when they came to open it the next day the were presented with the error message could not complete your request the file is not compatible with this version of Photoshop.
The file has been saved locally and hard drive and RAM are working as they should. Does anybody else have any idea to the cause of this problem. the file is 582MB in size. Any help would be greatly appreciated.

Sounds like it's corrupt.
Have you any backups or other versions?
http://windows.microsoft.com/en-ie/windows/previous-versions-files-faq#1TC=windows-7
OS X Mountain Lion: View and restore past versions of documents
This might help
http://hardcorerikki.deviantart.com/journal/Saving-your-corrupt-PSD-files-and-job-21415717 1

Lines in the file when I scan with the ADF in the Image Class MF4770

Similar Messages

Maybe you are looking for