Lines on screen, can't reset w home and sleep button at same time

Lines on screen, can't reset w home and sleep button at same time. Any advise.  4th gen. 32g touch

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar

Similar Messages

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • My ipod has a blank white screen. I have tried pressing home and power button at same time and a restore and its still the same. Can anyone help please

    Can anyone help me please? My ipod has a white screen that i cant get rid off. I have tried pressing home and power button at same time. I have tried a restore from itunes and its still the same. I cant even turn it off. Please someone help me.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iphone 5s won't turn on after i try the step with pressing the home button and sleep button at same time. Please, help me!

    Guys, i have a problem!
    My iphone 5s was at charging and when i checked him, he had a black screen... I saw some answer about this problem but doesn't work. That step with pressing home button and sleep button at the same time doesn't work and i don't know what else to do. Please, i need your help! Thank You!

    You don't just press the buttons at the same time, you have to hold them down together until you see the Apple logo. This can take 15-30 seconds. If it does not work the first time, connect the device to the charger and try again.

  • My iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off

    my iphone6 screen is off since last few days i have tried all the options like pressing the home and sleep button together but still its not switching it on before it was getting hanged quite often it had full battery charged but still it is off can anyone please help ......

    hi i m currently in pakistan and there is no apple store here . i will b back to australia after 2 weeks i was wondering if thei can b any fix as i have all my contacts and everything else in my mobile

  • I have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g

    i have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g. What should I do now?

    Just let the battery drain until the screen shuts off. When you charge it back up it should boot up normally.

  • My ipad won't turn on even i press home and sleep button together

    My Ipad Won't Turn On Even Press Home And Sleep Button Together..Its Happen When Charging Yesterday Night..Its That My Ipad Need To Repair The Sleep Button?Because Cannot Connect To Itunes..Help...

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
    http://support.apple.com/kb/ts1827
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My phone goes off in any time of the day and the only way to get it back is through pressing and holding of Home and Sleep button together

    Like I said in the subject line:
    My brand new iPhone 4S/32Gb goes off in any time of the day and the only way to get it back to live is through pressing and holding of the Home and Sleep button together for 5-10 seconds.
    Does anybody have that kind of problem as well?
    Thank you.

    I restored it on I tunes as well did something on the phone. The lastest seems to have helped it but I haven't used it much yet!  Thanks for the help & I'll let you know!

  • Dropped my iphone 4 from about 1 1/2 feet and now it won't turn on. I have tried holding the home and sleep button for 20 seconds but still nothing happened. Please Help!

    I have tried holding the home and sleep button for 20 seconds but still nothing happened.I have had this phone for 1 year and 10 months and I have never had any problems like this. Please Help!

    it likely need repair
    first you can try to connect it to AC though and try the home + powerbutton again

  • My iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

    my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

    Hi everyone,
    We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
    We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
    We activate both, but the SC is not returned in SoCo.
    Thanks,
    Ivá

    Hi Ivan
    You can use both badi to change srm standard behavior.
    but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
    i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
    for example
    shopping cart item has follow on document created  as a contract But you need to create a another shopping cart to create a Purchase order  w.r.t that contract .
    Once follow on documents are created sourcing flag will be removed .- rule
    BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
    BBP_DETERMINE_LOGSYS - Determine your logical system.
    Muthuraman

  • My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them.  I tried pressing the home and sleep buttons in as suggested, but problem not fixed

    My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them.  I tried pressing the home and sleep buttons in as suggested, but problem not fixed

    Keep to one discussion only. Go back to this one,
    https://discussions.apple.com/message/21087117#21087117

  • Can I use both cs and cc at the same time?

    Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

  • How can I use the "home" and "end" buttons

    I have an external apple keyboard (full style, with number pad and all) plugged into my macbook.  However, the "home" and "end" buttons don't function the way I'd like (i.e. they don't go to the beginning or end of a line).
    Can I ever get this to work or does it just not function with a laptop that doesn't have that function in the first place.  I'd like to not have to use multiple keystrokes just to get a similar home/end result.
    Thanks!

    "on your hub dont use the phone it will cost you more.when i change over to bt they never told me that i would be charged for useing this phone so i dont now.crafty bt again.when my contract is up i will be leaveing bt for ever,georgesaa."
    Not sure why you are charged for calls on this, as standard you would get free evening and weekends and there are packages for unlimited anytime.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • HT201412 ipod touch will not turn on even after ive held down the home and sleep buttons

    I have an ipod touch that just recently started to be unresponsive!  It had a good amount of battery left and then all of a sudden it turned off and now will not turn back on even after 30mins of charging.  no charging screen has appeared either.  ive held down both the home n sleep buttons for 10secs or more and still nothing has happened.  then i held down just the home button. still nothing and then i tried holding down the sleep/wake button for a couple seconds and still nothing has happened    are there any other ways of turning my ipod back on or did it **** the bed and i should get a new one?  thanks

    Try the remaining items here:
    iOS: Not responding or does not turn on

Maybe you are looking for

  • How do you see iTunes library size

    need to find out how many GB my iTunes music file is on iTunes.

  • V 3.6.13 causes problems with closing "home" tab, and crashing.

    I installed v3.6.13 recently, and noted a problem in closing tabs. * The "home" or default 1st tab of the browser opens correctly and will correctly browse to other sites. * I can open and close other tabs, however I can not close that 1st or default

  • Aperture RAW conversion and noise

    I've been using Aperture for many years and have recently learned something useful about how to tweak the RAW conversion settings.  Until recently I just left them at the default settings for my camera, a Panasonic GH2. Anyhow I've not been entirely

  • Timing violation on NI 9149 but not on cRIO

    I get the Timing Violations error when compiling an acquisition using the NI 9205 module on my NI 9149. I have tried compiling on the 40, 80 and 120MHz clocks with same results. I am not performing any complex tasks as yet so why am I getting this is

  • Why do u use JAVA ? :-)

    Hello All, Please tell me your reasons of using Java if you know in advance that your application will run under specific OS. Thanks