Lines with QT H264 export?

I'm getting these lines even though the video was interlaced.
http://www.flickr.com/photos/editgrrl1/sets/72157612038312520/
Export settings are: Qt conversion,
settings: H264, frame rate current, key frames automatic, frame reordering checked, data rate automatic, compressor quality high,, best quality (multi pass),
size
compressor native 586x439, deinterlace source video checked,
Main box - allow transcoding unchecked, prepare for internet streaming checked, fast start
Sound: format IMA 4:1, sample rate 22:05, sample size 16, stereo
Anybody out there solved this issue? Thanks =)

Hello, I have the same problem: Shoot on HDV 50i, edited in HDV sequence and exported in H264.
A lot of problem with lines on fast movements, wrong field sequence... I solved the problem deinterlacing the sequence before exporting in H264. But maybe a stupid question: It is not possible to leave the sequence interlaced in a H264 conversion ? Or H264 is only progressive?
The trailer on Quicktime movie trailer are very good at 10,5 Mb bit rate... not the same for my Clip !!
What kind of conversion they are using ?
I tried also with compressor but seems to me that the conversion engine is the same (same panel, same set-up, same results).
Gio

Similar Messages

How can i copy line with text and image to ms word

When I insert an image in textflow using InlineGraphicElement it works, but when I copy the line with the image to MS Word it copies only the text (not the image).
How can i copy the image to MS Word?

If you want copy formatted text and image to MS Word, you need to give MS Word rtf markup, because Word can recognize rtf markup but not TLF markup.
So you need to create a custom clipboard to paste a rtf markup. It's a large feature for you, because you need a tlf-rtf converter in your custom clipboard.
TLF Custom Clipboard Example:
package
 import flash.display.Sprite;
 import flash.desktop.ClipboardFormats;
 import flashx.textLayout.container.ContainerController;
 import flashx.textLayout.conversion.ITextImporter;
 import flashx.textLayout.conversion.TextConverter;
 import flashx.textLayout.edit.EditManager;
 import flashx.textLayout.elements.*;
 import flashx.undo.UndoManager;
 // Example code to install a custom clipboard format. This one installs at the front of the list (overriding all later formats)
 // and adds a handler for plain text that strips out all consonants (everything except aeiou).
 public class CustomClipboardFormat extends Sprite
 public function CustomClipboardFormat()
 var textFlow:TextFlow = setup();
 TextConverter.addFormatAt(0, "vowelsOnly_extraList", VowelsOnlyImporter, AdditionalListExporter, "air:text" /* it's a converter for cliboard */);
 private const markup:String = '<TextFlow whiteSpaceCollapse="preserve" version="2.0.0" xmlns="http://ns.adobe.com/textLayout/2008">Anything you paste will have all consonants removed.</TextFlow>';
 private function setup():TextFlow
 var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
 var textFlow:TextFlow = importer.importToFlow(markup);
 textFlow.flowComposer.addController(new ContainerController(this,500,200));
 textFlow.interactionManager = new EditManager(new UndoManager());
 textFlow.flowComposer.updateAllControllers();
 return textFlow;
import flashx.textLayout.conversion.ITextExporter;
import flashx.textLayout.conversion.ConverterBase;
import flashx.textLayout.conversion.ITextImporter;
import flashx.textLayout.conversion.TextConverter;
import flashx.textLayout.elements.IConfiguration;
import flashx.textLayout.elements.TextFlow;
class VowelsOnlyImporter extends ConverterBase implements ITextImporter
 protected var _config:IConfiguration = null;
 /** Constructor */
 public function VowelsOnlyImporter()
 super();
 public function importToFlow(source:Object):TextFlow
 if (source is String)
 var firstChar:String = (source as String).charAt(0);
 firstChar = firstChar.toLowerCase();
 // This filter only applies if the first character is a vowel
 if (firstChar == 'a' || firstChar == 'i' || firstChar == 'e' || firstChar == 'o' || firstChar == 'u')
 var pattern:RegExp = /([b-df-hj-np-tv-z])*/g;
 source = source.replace(pattern, "");
 var importer:ITextImporter = TextConverter.getImporter(TextConverter.PLAIN_TEXT_FORMAT);
 importer.useClipboardAnnotations = this.useClipboardAnnotations;
 importer.configuration = _config;
 return importer.importToFlow(source);
 return null;
 public function get configuration():IConfiguration
 return _config;
 public function set configuration(value:IConfiguration):void
 _config = value;
import flashx.textLayout.elements.ParagraphElement;
import flashx.textLayout.elements.SpanElement;
import flashx.textLayout.elements.ListElement;
import flashx.textLayout.elements.ListItemElement;
class AdditionalListExporter extends ConverterBase implements ITextExporter
 /** Constructor */
 public function AdditionalListExporter()
 super();
 public function export(source:TextFlow, conversionType:String):Object
 if (source is TextFlow)
 source.getChildAt(source.numChildren - 1).setStyle(MERGE_TO_NEXT_ON_PASTE, false);
 var list:ListElement = new ListElement();
 var item1:ListItemElement = new ListItemElement();
 var item2:ListItemElement = new ListItemElement();
 var para1:ParagraphElement = new ParagraphElement();
 var para2:ParagraphElement = new ParagraphElement();
 var span1:SpanElement = new SpanElement();
 span1.text = "ab";
 var span2:SpanElement = new SpanElement();
 span2.text = "cd";
 list.addChild(item1);
 list.addChild(item2);
 item1.addChild(para1);
 para1.addChild(span1);
 item2.addChild(para2);
 para2.addChild(span2);
 source.addChild(list);
 var exporter:ITextExporter = TextConverter.getExporter(TextConverter.TEXT_LAYOUT_FORMAT);
 exporter.useClipboardAnnotations = this.useClipboardAnnotations;
 return exporter.export(source, conversionType);
 return null;

How to insert line with values in ALV (CL_GUI_ALV_GRID)?

Hi,
Does anyone know how to get control of new line inserted in ALV (I am using class CL_GUI_ALV_GRID) before the new line is shown to the user. What I want the user to see is not a completely blank line, but a new line with certain fields filled with data.
I have tried with ALL events in CL_GUI_ALV_GRID but without any luck. If I create my own user command and insert it in the alv menu I get control, but not with the standards. Why?
Please help
Kind regards - Keld Gregersen

Hi,
I created a nice work around...
CLASS lcl_event_handler DEFINITION.
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar.
DATA:
l_toolbar TYPE stb_button.
Here I replace SAP standard functions with own functions
READ TABLE e_object->mt_toolbar INTO l_toolbar
WITH KEY function = '&LOCAL&APPEND'.
IF sy-subrc = 0.
l_toolbar-function = 'OWN_APPEND'.
MODIFY e_object->mt_toolbar FROM l_toolbar INDEX sy-tabix.
ENDIF.
READ TABLE e_object->mt_toolbar INTO l_toolbar
WITH KEY function = '&LOCAL&COPY_ROW'.
IF sy-subrc = 0.
l_toolbar-function = 'OWN_COPY_ROW'.
MODIFY e_object->mt_toolbar FROM l_toolbar INDEX sy-tabix.
ENDIF.
ENDMETHOD. "handle_toolbar
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'OWN_APPEND'.
CALL METHOD ref_alv->check_changed_data
IMPORTING
e_valid =
CHANGING
c_refresh = 'X'
CREATE YOUR OWN CODE HERE
CALL METHOD ref_alv->refresh_table_display
EXPORTING
is_stable = 'X'
i_soft_refresh =
EXCEPTIONS
finished = 1
others = 2
ENDMETHOD. "handle_user_command
ENDCLASS. "lcl_event_handler IMPLEMENTATION
Kind regards
Keld Gregersen

When I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes can you help me please

please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closes

You need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil

Messed up colors with quicktime h264 output

Hello to you all,
Probably not the first time this is mentioned on the apple forum, but I still can't find a working solution for this problem:
Whenever I output a h264 file with quicktime, my colors are messed up.
I have a red car on video. It's red in the original AVCHD MTS file viewed with VLC, it's still red when converted to AIC with voltaic and viewed in Quicktime. But then it happens, exporting to h264 results in a red car with a light blue cast over it, it looks purple!. Both in VLC and Quicktime.
Tried colorsync filters, probably every existing combination, only makes things worse.
Tried to attach other color profiles with automator, only makes things worse.
I have a wonderfull screenshot of this...hmm I can't attach pictures into this forum...or can I ?
Does anyone know why my car is red in the original raw footage, still red in the AIC file and NOT red but slightly purple in the h264 export.
My settings for h264 output:
Bitrate 24Mbps. Multiple cycles.

Wrong forum. This one is to support the FCS application COLOR. It isn't to discuss the vagaries of how your software interprets color information.
You will get better response by posting your question in the forum on this Apple site dedicated to the software you are using for the transcoding.
x

Line with red blob

What is the line with a red marker on its left-hand end, in iCal's weekly view????

Hey Andy,
That is a time-of-day marker, I believe.

Open item account line with flow type has to contain a partner

Hi,
I am getting the following error while doing periodic posting in flexible real estate management.
" Open item account line with flow type Z240 has to contain a partner"
" Open item account line with flow type Z820 has to contain a partner"
Message no. RERACA005
I have found a similar message in this forum.
This error is not coming for other flow type Z120 in the contract.
The accrual type for accruals is set as ANRVCN and Accrual type for deferrals is set as TRRVCN in the definition of flow type with S Debit posting.
For ANRVCN , posting supported is " Only periodic" and for TRRVCN " All"
Please guide as to where I need to check and correct.
Regards,
T Saravanan

Hi Saravanan.
I have the same problem, could you help me to solve it?
thanks in advance!
Lucas

Schedule Lines with Firm

Hi Gurus,
I have an Issue in Schedule lines. Delivery schedules lying with in the firm zone has firm indicator 1(Firm zone) in ME33l. The same schedule line shows in MD04 with * Symbol as firmed. In some of the cases Delivery schedules push out from the Firm Zone does not have a Firm Indicator in ME33l but it is firmed in MD04 with * symbol.In which table & field I can Identify the Firmed schedule lines with * symbol in MD04.Please Help me.
Regards,
Senthil.K

Delivery schedules lines are populated when MRP is Run.
symbol indicates that you have done manual intervention in the purchase order mentioned.
In MDO4 you can see * symbol
Ganesh kumar

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How can I print the "number lines" with the code in Visual Studio?

How can I print the "number lines" with the code in Visual Studio?

Hi BillionaireMan,
What about your issue now?
If you have resolved it, you can share the solution here, which will be beneficial for other members with the same issue.
If you did not, please tell us more information,we will try my best to help you.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can you switch to alternate phone on line with edge payment?

I have a need to temporarily from time to time switch to an alternate phone on a line I currently have Edge payments on. I will continue to keep and use the phone I'm making edge payments on, but if I take the SIM out and put it in another phone for a few days, will that affect my monthly Edge payments? I won't be putting a different SIM in the phone I'm making payments on.
Anyone have experience with this?

lewisr13 and mrhelper thanks for the responses. To clarify, I have an iPhone currently on a line with edge payments being made on that phone. I may temporarily from time to time need to switch to an Android phone on that line. I would like to keep making Edge payments on that iPhone and not have to pay it off all at once if I switch to the other phone temporarily. I have no plans to put the iphone on another line during that time and that Android phone won't be purchased via that line or any other line on my account. It would be simple swapping of SIM from iPhone to Android phone and back.
I'm just trying to avoid getting hit for the whole cost of the iPhone at once and prefer to keep my monthly Edge payments for it...that's my primary goal or what I want to understand.

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line
regards,
srinivas
*reward for useful answers*

Line with 0 quantity for main item with batch split

Hello experts,
I have one line item in delivery. Delivery split is there: There are 1 spilt items with 1 batch nos. The main item category and the batch split item category are TAN.
My system is showing 2 line items in billing, the batch line with quantity and the main line with zero qty. How to prevent this and have only the lines item in invoice with batch/qty. I don´t want to see the main item with o quantity.
In VTFL I have routine for copying requirements 004 and Billing Quantity B. I need to create another copying routine or I need to use another item category for batch lines?
Thanks in advance
Pablo

Hi Pablo,
It is advisable to have a different item category for Batch split items.
If you want the batch split items to suppress and show only the Total in the Invoice. Yes it is possible.
1) You can do this in the Copy controls in VTFL - Delivery to Billing, go to your Item category and go to Item details - Change the billing Qty to 'G'.
2) Go to Shipping > Deliveries > Item categories Determination in Deliveries > Define item category.
Go to your item category which is used in Batch Split
Remove the Billing Revelance and make it blank and Save.
Now when you create the Invoice for Batch split - Only the total quantity will be displayed without the subitems - like in Delivery note or Delivery..
Please check and revert back for any more details
Rgds
Sunil.

Line with intersection points across Polygon

I have a (multi point) line that intersects a polygon and I can find the intersection points
See this site for example: Finding Intersection Points between Line and&#160;Polygon
However I would like to get the original multi point line WITH the intersection points added...
How would I achieve this?
Basically for a given line that intersects a polygon, I would like to have returned...
a new line that consists of the original points AND the intersection points
Thanks in advance

Hi Luc,
Thanks for your response.
I had tried an SDO_UNION however the result of the union is not quite what I expected...
Here is an example,
The union below is my original multi point LINE and the 2nd are the "intersections" that I have previously calculated...
These intersections are actually in between specific points in the LINE...
However the union does not seem to put these 4 points in the line where I expect them too..
Not sure if SDO_UNION is the function for the job ?
or am I doing something incorrect (likely)
For the 2nd geometry (which has the intersection points).... what would be a type to use ? Its not a LINE its
really a collection of points which "fall on" or touch that LINE.
select SDO_GEOM.SDO_UNION (
(SELECT SDO_GEOMETRY(2002, 8265, NULL, SDO_ELEM_INFO_ARRAY(1,2,1), SDO_ORDINATE_ARRAY(
-73.7789255556,40.6397511111,-70.0267102778,41.2818872223,-69.7833,42.4333,-69.6333,42.5166,-69.45,42.6166,-69.3,42.7,-69.1333,42.8,-68.95,42.8833,-68.8,42.9833,-68.6333,43.6666,-68.45,43.1666,-68.2666,43.25,-68.1,43.3333,-67.9166,43.4333,-67.7666,43.5166,-67.5833,43.6,-67.3833,43.7,-67.2166,43.7833,-67.6666,43.8833,-66.8666,43.9666,-66.65,44.6666,-66.5,44.15,-66.2833,44.2333,-66.1,44.3166,-65.9166,44.4333,-65.7333,44.5166,-65.55,44.6,-65.3666,44.6833,-65.1666,44.7666,-64.9833,44.85,-64.7833,44.95,-64.5833,45.3333,-64.4,45.1166,-64.1833,45.2166,-64,45.3,-63.8,45.3833,-63.6166,45.4833,-63.4166,45.5666,-63.2,45.65,-63,45.7333,-62.8166,45.8333,-62.6166,45.9166,-62.4166,46,-62.2,46.3333,-62,46.1666,-61.7833,46.25,-61.5833,46.35,-61.3833,46.4166,-61.1833,46.5,-60.9833,46.5833,-60.7666,46.6666,-60.5666,46.75,-60.3666,46.8166,-60.15,46.9,-59.95,46.9833,-59.75,47.6666,-59.55,47.15,-59.35,47.2166,-59.1166,47.3,-58.9333,47.3666,-58.7333,47.4333,-58.5166,47.5166,-58.3333,47.5833,-58.1333,47.6666,-57.9166,47.7333,-57.7166,47.8,-57.55,47.8666,-57.3333,47.95,-57.1333,48.6666,-56.9333,48.3333,-56.7166,48.15,-56.5166,48.2333,-56.3,48.2833,-56.1166,48.3666,-55.8833,48.4166,-55.7,48.4833,-55.4666,48.55,-55.2833,48.6,-55.05,48.6666,-54.8666,48.7166,-54.65,48.7666,-54.45,48.85,-54.2333,48.9,-54.6666,48.95,-53.8,49.6666,-53.6,49.6666,-53.3833,49.1333,-53.1833,49.1833,-52.9833,49.2333,-52.7666,49.3,-52.55,49.35,-52.3333,49.4,-52.1166,49.45,-51.9,49.5166,-51.6833,49.5666,-51.4666,49.6166,-51.2333,49.6666,-51.6666,49.7166,-50.8,49.75,-50.6,49.8166,-50.3833,49.8666,-50.1666,49.9166,-49.95,49.9666,-49.7333,50,-49.5166,50.3333,-49.2666,50.6666,-49.05,50.3333,-48.8333,50.1166,-48.5833,50.15,-47.9166,50.25,-40,51,-35,51.6,-29,51.1166666667,-40.0833333333,50.4333333333,-44.55,49.6,-52.75,47.6166666667,-52.7524194444,47.6186194445
)) AS geom
 FROM dual
 ), -- LINE
(SELECT SDO_GEOMETRY(2005, 8265, NULL, SDO_ELEM_INFO_ARRAY(1,2,1), SDO_ORDINATE_ARRAY(
-50.0000000000001,49.9551029915852,
-30,51.2193352796549,
-50,48.3647769601594,
-30,51.0986671679795
)) AS geom2
 FROM dual
 ), -- INTERSECTIONS
 0.005
) from dual;
The "INTERSECTIONS" above
-50.0000000000001,49.9551029915852,
-30,51.2193352796549,
-50,48.3647769601594,
-30,51.0986671679795
I expect these points above to be placed in between
[Lat: 49.9166, Long: -50.1666] --> crossing Lat: 49.9551029915853, Long: -50 <-- [Lat: 49.9666, Long: -49.95]
[Lat: 51.6, Long: -35] --> crossing Lat: 51.2193352796549, Long: -30 <-- [Lat: 51.1166666667, Long: -29]
[Lat: 51.1166666667, Long: -29] --> crossing Lat: 51.0986671679795, Long: -30 <-- [Lat: 50.4333333333, Long: -40.0833333333]
[Lat: 49.6, Long: -44.55] --> crossing Lat: 48.3647769601594, Long: -50 <-- [Lat: 47.6166666667, Long: -52.75]
I have the intersections which is fine.. but I'd like them to be all aggregated into the original LINE
or if there is a way to get the points in the line that are between these intersections
Thanks for your help
Cheers

Line with same key

Hello everybody, Im facing a problem when trying to run a query
Im getting an error that says: There is already a line with th same key.
I ran the program ANALYZE_RSZ_TABLES and I found the query that Im trying to run under the error: Selections or RKFs with incomplete defeinition. Im not sure if Im in the right track, or if there is something else that I have to check.
Can somebody help please?

yes I already went there too but found anything important. I did search the oss nothes but nothing worked, I´ll keep trying and see if I can solve it, but if somebody has any idea, please tell me

Lines with QT H264 export?

Similar Messages

Maybe you are looking for