Linespeed gone back once again from 6.5mbps to 280...

Since around 1st March we have been receiving vo4 error. We have had an engineer out twice now and last time he replaced home hub and requested reset then all is well for about 2 days. Then once again the line speed falls from about 6.5 mbps to about 280kbps. Its getting really annoying. Can't use broadband very well at this speed either! Has anyone had this type of fault? Apparently the wiring to the exchane is all good according to engineer tests.

It might be worth posting this in the Broadband forum for people to be able to help with this.
You need the config pages from your hub posted on your new post, BT speedtest (http://www.speedtester.bt.com) and paste the results onto your new thread.
Have you been resetting your hub lots?
Thanks

Similar Messages

  • How to transfer the file once again from save folder to main directory .

    Hello friends ,
    By mistakenly i have executed wrong job and the file has been moved from Al11 directory to save folder.
    I wanted to have the same file once again in the main directory . can u plz tell me how to do this ?
    Regards

    You can use "infospoke" to save file in the Application server(AL11).
    Also give the T.code AL11 and click on the tab "Configure" to create file on the Application server.
    Edited by: Rohan Kumar on Jan 16, 2008 11:20 AM

  • My iTunes music has disappeared...and when I tried to import it once again from my CD's it would not accept my music...it seemed to remain stuck...and now when I click on the iTunes icon...it won't open up for me...

    Hello, I sure hope someone can help me. My itunes music has ALL disappeared....and when I tried to replace it {I guess it's known as import it from my CD} it seemed to remain forever on 0.02 and would not move on to the other song....I became frustrated....and ejected the CD....and got a pop up window telling me pretty much that this was a no-no....anyway...I clicked on my itune icon to open it up and start with another CD to import music....well now my icon won't open and everytime I click on it to open I get a pop up window from Apple...asking if it is ok to make changes....I click yes...and nothing happens....I also tried to see the compalibility and it is now telling me it is not combatiable......well it was yesterday and the day before...and even a few minutes ago...when I was able to open it once....What does this mean? I just had my computer cleaned out.....could it have been something they did? Do I have to uninstall it and reinstall it?? Also when I first opened itunes....I got a pop up window saying something to the effect...that I had 2 itunes and was only allowed 1....and did I wish to transfer my purchases....and I can't remember what else it said....I chose transfer....and those were the only songs I could find on my itunes before it wouldn't let me open it again.....Can someone help PLEASE.....newbie here

    You can't activate any GSM iPhone without a valid sim card installed in the phone.
    So, yes, you need to get a sim card.

  • TS5376 iTunes once again won't close. Past versions of iTunes had the most annoying behavior that when ever closed it would immediately reopen. Apple update just installed the latest version and the problem is back. Help.

    Past versions of iTunes for Windows had the annoying behavior that it couldn't be closed. If I tried to exit or close the window iTunes would just open back up again. It had gone away, but apple just installed version 11.1.5.5 and it's back! The only way to exit is to open task manager and kill the process. Nothing else seems to work. Guess what Apple, I really don't want to have iTunes open all the time. I think the only answer is to stop using iTunes, since I don't have any Apple devices anyway, and go with a different music player on my PC.

    Thanks.
    Just in case, we'd better check on another old potential culprit (don't see it reported much lately, though) ... do you have any Logitech gaming software installed on the PC?
    If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • My iphone 4s in unlocked and i am currently using it for tmobile prepaid service. i want to restore the 7.0 settings back to 6.1.3 .. will this lock my iphone 4s once again after i restore it back to 6.1.3?

    My iphone 4s in unlocked and i am currently using it for tmobile prepaid service. i want to restore the 7.0 settings back to 6.1.3 .. will this lock my iphone 4s once again after i restore it back to 6.1.3?

    Because GPS has nothing to do with WiFi, cellular signals, or data of any sort. GPS is implemented by signals sent by satellites that are received by GPS receivers. The receivers process the information from the GPS satellites and calculate your location. GPS never sends data anywhere; GPS functionality is receive only.
    If you have WiFi or cellular data turned on this can improve the accuracy of GPS, because the GPS receiver can then use the known location of cell towers and WiFi networks to refine the GPS location. GPS by itself has an accuracy of 10 meters, or about 34 feet. Using the additional information from WiFi and cellular data this can be brought down to 3 meters (10 feet). This mode is called Augmented GPS, or A-GPS.

  • Once again, my .mac aliases have disappeared from Mail.... Arghhh! help?

    Once again, with no warning, all my .mac aliases have disappeared from the dropdowns in my Mail app (OS 10.4.11). They still exist in .mac/mobile me webmail, and in Mail i'm still receiving emails addressed to them. But I can't reply to these emails with the alias, nor create new emails with aliases.
    I have tried Sync-ing with the site- i recollect that has worked in the past, but now no change. i have tried adding the aliases in with commas after the primary address in Preferences (as is suggested in KB below), but it does not work- and the next time Prefs is open, they are gone. In Mail preferences, the account is listed as ".mac", which is listed in the KB as one of the correct types (the other being imap).
    I use my .mac aliases a lot, and have for years. i do NOT like or want to go to .mac/me Webmail to be able to use them. i do NOT want to change them to .me addresses/aliases. I can't stand how they just randomly come and go as far as being available as dropdowns in Mail... what the heck is up with Apple? i'm paying $100 for these kinds of services (excuse me, $99) and they can't keep a few aliases available to their own app (Mail)? If they weren't so deeply embedded in my business uses, i'd ditch the whole thing.
    Anyway, enuf ranting; does anyone know the solution or work-around? Nothing in the below KB worked for me, even tho it is supposed to.
    the non-helpful KB: http://support.apple.com/kb/HT2296

    If your aliases are disappearing after you enter them, that would indicate that your Mail preferences file has become corrupted. The only solution for that is to delete the com.apple.mail.plist file in Home/Library/Preferences, then restart Mail and setup your account(s) again.
    However, before you do that, you must remove all your mail account folders that being with "IMAP-"; otherwise you'll create more problems for yourself. Those are located in Home/Library/Mail.

  • MDT 2012 deploy OS from USB external drive failed - need to unplug and plug it once again

    We are using MDT 2012 and deploying Windows 7 using media (USB external hard drive). We can successfully deploy Windows 7 32 bit using this method but there is a problem with deploying Windows 7 64bit. This problem appears only on HP EliteBook 840. We can
    boot into WinPE 64 bit and can start proper task sequence, all image is applied then after restart, before logon screen appears there is an error saying that cannot find litetouch.vbs script. After clicking ok, I can logon to Windows and there is no usb external
    drive recognized. But when I unplug and plug usb drive once again it is recognized by Windows and can be used. I can see that Windows install some drivers just after plug it again
    I checked BIOS looking for some USB power options - there is no such settings. And 32 bit deployment works ok. So this is not a case. Looks for me like a problem with proper usb drivers for 64 bit. I download all drivers from HP website (driver pack and
    drivers only for USB 3.0). We are using make and model matching in MDT - works ok for all the rest hardware models. Any idea how to troubleshoot it?

    Not sure what's going on here. Is this a USB "Flash" drive or a USB "Hard Drive". There *Is* a distinction.
    I *thought* that MDT would copy itself to the c:\minint\scripts folder to continue installation.
    Next time, when you see this error, Press Shift-F10 to get into a cmd.exe prompt. Can you find litetouch.vbs on any of the drives? Does the USB Drive appear?
    IF in fact, the USB Drive is not appearing after the 1st reboot, then you have a problem. Why did the USB 3.0 driver not install. Check the Driver Installation Logs to verify.
    Keith Garner - keithga.wordpress.com

  • When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

    I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

    Read the User's Guide... it covers how to backup and sync the device as designed.

  • My iPhone 4S keeps losing connection and turning off, and i am unable to turn it back on again without the charger, but it turns on when i press the button and regains signal fine once i return home?

    Hi
    I have recently bought a white iPhone 4S on Tuesday, and it has been repeatedly loosing all connection and just suddenly switching off.
    When this happens I am unable to turn the phone back on again without a power source plugged into it. When I try to remove the phone from the power source it goes completely dead again.
    However, the most recent time this has happened (today), as soon as I returned home the phone had no problem starting up as normal when I pressed the power button.
    The signal was working fine even though it says 'searching' in the left hand top corner of the screen. I am wondering if my WIFI at home is influencing the phone to work inside the household?
    This is a problem that needs to be sorted out ASAP because the phone is not working the majority of the time when I need it to.
    Please if you have any suggestions or know the cause of this problem inform me straight away.
    Would be much appreciated.
    Thank you.

    Try connecting it to your iTunes library in Recovery Mode and restoring it.  See this article for help on getting your iPod into Recovery Mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim ?

    I recently inherited a restored iPhone 5 from my uncle and its needs a sim to be activated, could i use my friends sim just to activate my iPhone and then give the sim back once its activated without affecting his contract and later on get a sim for myself and a contract for me and it all be normal??? Thanks

    The phone MUST have a SIM present in order for activation to complete. The process will not finish otherwise.
    For the OP:
    If the iPhone 5 is locked to a carrier, you must use a SIM from that same carrier. Otherwise I think you would be OK borrowing the SIM to activate the phone.
    ~Lyssa

  • My iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

    my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!

    If your contacts are synced to your computer then they are in the supported app you are syncing with.
    When you set up syncing of contacts on your device, which application did you select? 

  • HT201269 I restored my iphone and now it has gone back to factory settings. How do I transfer all the purachsed items from my itunes back onto the phone?

    I restored my iphone and now it has gone back to factory settings. How do I transfer all the purachsed items from my itunes back onto the phone?

    Hello whytea4
    Check out the articles below and choose the one for your computer to sync media and apps to your iPhone.
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • When using Time Machine, if I delete items from my computer, will they still be backed up to access later on my external hard drive? In other words, when time machine backs up again, will it delete the files from the back up?

    When using Time Machine, if I delete items from my computer, will they still be backed up to access later on my external hard drive? 
    In other words, when time machine backs up again, will it delete the files from the back up that I have deleted from my computer?

    No, I do not believe so. Time Machine would keep all those now-deleted files in previous backups, and as time goes by those backups might be deleted if you needed room, but it would still keep one backup from each day in last month, as well as one from each week forever, as long as you don't start running out of room, then just the oldest would be deleted to make room if needed.
    I use a backup drive about double the size of my drive to be backed up, so I would guess it will never get to the point where deleted files being replaced by new ones being backed fill up that drive to the point where backups actually have to get deleted.

  • Once bootcamp is installed on my Mac, how easy is it to go back and forth from windows to Mac? Just a press of button or do I have to completely log off of one to go to the other?

    Once bootcamp is installed on my Mac, how easy is it to go back and forth from windows to Mac? Just a press of button or do I have to completely log off of one to go to the other?

    Using vitual machine programs (VirtualBox, Parallels, VMWare Fusion) you can run both at the same time.
    Load Windows under BootCamp.  Then load the VM software and select the existing BootCamp partition as the "virtualized space".
    But ... BootCamp first, following Csound1's advice about backups.  And you will wantto boost RAM most likely because you need to allocate certain amount of system RAM to each "virtual machine", as well as leaving some for OSX.
    But ... BootCamp first.

  • I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer the info has gone back to before i edited it.. Help!?

    I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer (following apple's instructions- using an external hard drive) the info has gone back to how it was before i edited it.. Help!?

    Hello,
    I would recommend taking a look at the article below for more information about migrating your iTunes library.
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1364
    -Griff W.

Maybe you are looking for