Link a Tx to a Report Painter
Is there a way to asign a transaction to a report painter?
When creating a t.code via SE93, select transaction with parameter (parameter transaction). In the "Default values transaction" field, enter in "START_REPORT", check "Skip initial screen"
For "Name of screen field" and "Value" table enter in the following:
"D_SREPOVARI-REPORTTYPE" "rw"
"D_SREPOVARI-REPORT" "ENTER IN YOUR REPORT NAME"
"D_SREPOVARI-EXTDREPORT"
The quotes are for documentation purposes and do not need to be entered into SAP.
I hope this helps.
Mike V.
Similar Messages
-
Re : Report Painter / Creating a link among 2 variations in Report Painter
Hi everyone,
In my report painter, there are 2 variations which are 2 seperate fields of a table. I have a request which demands to link those variations to one to display as a hierarchy.
For example :
The variation 1 stands for the field of 'Company Code' (GLPCT-RBUKRS)
The variation 1 stands for the field of 'Business Area' (GLPCT-GSBER)
The new display of the variaton would be :
Company Code 1
|-- Business Area 1.1
|-- Business Area 1.2
|-- Business Area 1.3
|-- ...
I tried to create a variable for a multiple dimention set, and several settings concerning variation. But they didn't work at all.
Do you have any ideas to link those 2 different fields??
Reward points for your helpful suggestions for sure.
Many thanks,
Best regards,
HuongHi
Try using Sets. Create set using T.code GS01 and click on Hierarchy Maintenance and create Hierarchy.
In report painter, select edit - general selection data - select set or Hierarchy, enter the set you have created.
Next Go to Variation, select business area and select the button explode.
It is show you Hierarchy of business area in the output of report painter.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M -
Regarding Sap Report Painter Tutorials
Hi All,
I donot know whether it is right Forum
to Post message. Sorry if I am wrong.
Can anyone tell me some Link for good tutorial of Report Painter,
As I have to work on that.
Also I am beginner in Report painter
Regards,
Rishi BhatiaHi All,
I am very much thankful to all for helping me.
Yes the report painter notes are really good.
But now only I knew that I have to work in Report Writer also more but less in Report painter.
So please any of you can guide me for tutorials of report Painter,
I will be more than happy for that.
Regards,
Rishi Bhatia -
Can you create report using report painter with Tcodes:FAGLL03,FCHN
Hi Experts,
1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
2.i never used report painter can anyone provide report painter pdf for ecc6.0
3.can any oneguide me how to develop report in report painter by using this tcodes.
4.If not possible can i do with report writer?
Regards,
naresh.
Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!cross posted
Edited by: nareshvarma on Jul 19, 2010 9:11 AM -
Report Painter and Report Writer (URGENT)
Hi All,
Please can you send me Step by Step screen shots Configuration document for Report Painter and Report Writer,
If any body send relavent data i will give reword points,
Regards,
TMLHi,
see the below link cfor complete documentaion of report painter.
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Thanks. -
How to link report painter to tcode FS10N
hi guys,
we have report painter with table GLT0 , which displays the total amount per GL account, is it possible when user double click on the amount , it will go to tcode FS10N to display the details ?HI ,
Go to bellow link
http://www.sap.com/india/about/events/worldtour11_mumbai/pdf/presentation/T3S3_xBRL_DM_Ravi.pdf
Thanks,
Raviteja -
Can you please send me a link/ document about SAP Report Painter? It is very urgent.
Regards,
Subhohi
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-9876
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-other/accessing-tables-using-report-painterwriter-98766
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
regards
navjot
reward if helpfull
check the following links
Report Painter
report painter
Report painter
Report Painter
Report Painter -
Logical Formulae in Report Painter
Hi,
How do we insert a logical formula in a report painter.
For instance, "IF-THEN-ELSE".
Your early replies would be appreciated..You would create a formula column in reports or formula variables to use in columns.
More details on link's below:
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22c6243c611d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ea043c611d182b30000e829fbfe/frameset.htm
Best Regards,
Daniel Scoz. -
Creation of report with the help of report painter
Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread lockedHello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish -
Accounts Descriptions in Report Painter
If I have a set with a range of accounts and no description, for example:
SET [345,899]
I link this set to be output in a report using report painter...
How do I do to see the accounts descriptions about this range in ReportPainter.
I mean:
Something like this......
345 description 345
346 description 346
347 description 347
368 description 368
390 description 390
etc etcHi
To create a Transaction Code for a Report Painter/report writer report
Tcode for Report Painter
To create a TCode, follow the steps below.
1) Go to Transaction code SE93, Enter TCode Name and Press Create.
2) Give short Description and select Parameter Transaction, Press Enter
3) Select Transation Radio Button and write START_REPORT in the next text
box Also Check the box Skip Initial Screen.
4) On the bottom of Screen (default Values), Enter Parameters
i) Name = D_SREPOVARI-REPORTTYPE. Value = RW
ii) Name = D_SREPOVARI-REPORT Value = Your Report Group Name (Say 1SIP)
5) Save and Execute.
<b>Reward points for useful Answers</b>
Regards
Anji -
Selection Screen in Report Painter
Dear Experts,
I have an issue in the report painter. While executing the report from GRR2, selection screen is not displayed but report is coming as I expected.
I want to create the selection screen for this report. I have created this report without copying from the standard report.
Thanks in Advance.
Regards,
AswimnHi,
Please refer following links.
<Link farm removed by moderator>
Regards,
Renuka S.
Edited by: Vinod Kumar on May 25, 2011 10:12 AM -
Order analysis in report painter
Hello,
I'm working in report painter in order to analyze internal orders and particularly purchase orders flows linked to these orders.
My issue is when I analyze actual line items =>
- In those lines there are postings which are posted directly in FI and others that are posted from the incoming invoices MM.
- The business transaction used as a characteristic the identify those postings is the same. It is COIN (CO through posting from FI.
- I would like to distinguish these two types of postings.
- I noticed that there are the original business transaction or the reference transaction that would help me to make the distinction.
- For direct FI postings I would use RFBU (FI postings) original business transaction and for MM posting I would use RMRP (MM incoming invoice).
- But I did not find any way to isolate these information in report painter.
Could you advise me to know how I can solve this issue?
Thank you very much.
R.Hi Eli,
The idea is to have in the same report a mix of KOB1 and KOB2 and to compare the data with the inital budget.
For each order or order group you have:
the intial budget | The purchase requisition commitments| The purchase order commitments| The FI posting via MM incoming invoices| The FI direct postings wich correspond to provisions purchase orders invoices that we did not received yet.
Thank you
Best Regards
R. -
Can anybody help me in Report Painter? I need a link.
Regards,
SubhasishPlease go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I have a standard report and it uses a structure to pull the data for the report. I need to create a custom report which uses the same structure, selection screen but a different layout. Could any of u plz advice, if its doable in report painter or just plain abap program?? Also I am interested to know how the report painter stores the actual report?? as ABAP program?? Please help..urgent..
check the SAP help ..
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
I had made couple of SD reports in report painter 4 year ago .. as far as process is concern you have create library , but it deals with information structure which start with s0* , after defining information structure in library it take to select the fields and display them on your out put . information structure have the statistical data most of the time . As i worked on information structure , so31,32,33 .....
I t creates ABAP program like ABAP query creates in background . if you execute Customer Over due analysis or in Co02 cost analysis report or MC* ( MM stock reports ) those are in report painter .
Hope this'll give you some guide line ...
As far as I know about report painter, It create a report in background..Like when you make ABAP query (SQ01, 02, 03 ) .. It will create a report. You cant modify the report . You have to get OSS id in order to do that. if you're ready do it then you can pass it to Memory and can achieve your goal ...
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
The variation objects are coming from the sets.
For example, when you read the report 'Cost Centers: Actual/Plan/Variance'(T-code : S_ALR_87013611), you can find the characteristic 'Cost Center' is set as a 'set variable'. So the cost center in the report left side are coming from the cost center group that you input.
Does any know if we could use Report Painter across two controlling areas? Any documentation available will be great. Yes. When setting up a report in CCA you can have multiple controlling areas. In the General data selection you will have the option for the CA as a selection.
You can also use standard references objects to construct your own reports: libraries, standard layouts, default columns, and row and column models, all in the standard R/3 System, are available for custom reports.
Report Painter report definition requires several Preparatory Steps, depending on the complexity of the report to be generated.
1) Create a library and pick your reporting tables.
2) Create your report
3) define your set up within the report
a)General data selections
b)Colimns
c) rows
d) formulas
Standard layouts are maintained in the IMG "Financial Accounting" under "Special Ledger -> Information System -> Maintain standard layout.
Create libraries, which means assigning the
characteristics
key figures
Predefined columns
For each of these categories you need to select the objects to be used in reports of the specific library. You define the sequence of the objects in the selection lists of the Report Painter in field "Position". Frequently used objects should be at the top of the list.
go to
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ba743c611d182b30000e829fbfe/frameset.htm
I have created a report through report writer/Painter(GR51). My query here is to link this report to a transaction code. Could you please suggest me how can I acheive this?
Go to SE93 and select the Transaction with Parameters ( Parameter Transaction)
Then in the Transaction field give: START_REPORT
Skip initial screen
Screen 0
In the default value for the parameters give
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ( Give your Report Group )
If you have any doubt pick any report painter tcode and check in SE93
Follow below steps
1) Execute report through report painter
2) From system status get the program name
3 ) go to se93 and select report transaction and assign
program name .
Is it possible to make bigger the text a I have on a text field?, Im using the screen painter and I need to put the title bigger (as a requirment).
You can define your text as any length.If you are talking about the font,i am afraid you cannot do that.
No, you can not change the size(font) of the text on the dynpro, you can hightlight it, which changes the color to "blue" to make it stand out. You can change this on the attributes tab when double-clicking on the element in screen painter.
what is the sentence that open a screen painter file
Don´t really understand what you mean with "open a screen painter file".
If you are speaking about showing a form generated with the screen painter,
Dim oXMLDoc As New MSXML2.DOMDocument
oXMLDoc.load("Form.xml")
SBO_Application.LoadBatchActions(oXMLDoc.xml)
Dim oForm As SAPbouiCOM.Form
oForm = SBO_Application.Forms.Item("YourFormID")
oForm.Visible = True
regards
vinod -
Data of the Report Painter report
Dear ALL,
I have the Report Painter report. When I'm executing this report I can save the data into the extract.
Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
Best regards,
IgorPlease go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
regards
vinod -
Report Painter / Writer Help
Hello experts,
Could you please help me with some documentation on report painter and report writer ...
I didn't found detailed wiki to follow for my first report painter sample.
As mentioned in some other threads there's documentation on http://help.sap.com/ but I'm searching for beginners docs to follow step by step.
Thank you in advance for your help.
Regards,
Moez.Hi Moezz,
Please check below link.
[http://www.virtuosollc.com/PDF/Get_Reporter.pdf]
This document is with Screen shots & step by step one.
This could be of great help for you.
Kindly set to resolved if it helps you.
Regards
Abhii.....
Maybe you are looking for
-
What to do when trying to log into my iCloud and it says "this apple iD is valid, but it's not an iCloud account"?
-
How can I generate printer spreads when using an Indesign Book?
Our design team utilizes the Indesign Book feature to tackle magazine design. This convenient feature has become part of our workflow for both print and dps versions of the content since we do not work in the same locations yet share design responsib
-
Using a variable outside of the block it has been incremented
Hello everyone, I came across a scenario where in I am having to use a variable (for summing up), outside of the block within which it has been incremented. Its something like below: -------------- Header section of MS Word RTF (repeats for every pag
-
Yesterday, my ability to receive gmail,facebook,safari,etc. ceased to perform The wifi connections shows that it is connected but I cannot get through the internet . I use a Cisco router and it is working fine with another computer and also a prin
-
I had configured everything for certificate authentication EAP-TLS in Windows 2003 AD with enterprise CA. After logging a machine to domain I receive a certificate for computer, then setup XP SP3 to reauthenticate perion 120 sec (by Microsoft KB). I