Link attribute structure to the hierarchy of territory management
HI verybody
I'm working on territory management. I created the hierarchy and I defined the attributes. But now, how is possible to link this attributes to the hierarchy?
thank for your help
Stefano
found it, the structure name is WPLOG.
Similar Messages
-
Error while loading the Hierarchy to 0GLACCEXT
Dear all ,
I am trying to load a hierarchy ZEM 1 that is manually created in R/3. when I am executing the Infopackage its showing an Error that
1.Record 8 :Node characteristic 0GL_ACCOUNT is not entered as hierarchy characteristic for 0GLACCEXT
2.Too many error records - update terminated
and what is the the concept of 0BAL_DPEND to be added as attribute to OGLACCEXT.
ThanksHi Dash ,
I am providing the long test for the error ...Also can you tell me how I should use 0BAL_DPEND field as an attribute of Hieararchy of 0GLACCEXT. Coz i am supposed to do this
<u>Hierarchy for Characteristic 0GLACCEXT with Attribute 0BAL_DEPEND
The hierarchy for characteristic 0GLACCEXT is used as the financial statement version in BW queries. To technically enable the particular exception aggregation for contra items, the hierarchy table of characteristic 0GLACCEXT contains the attribute Balance-Dependency of a Hierarchy Node (technical name 0BAL_DEPEND).</u>
The Long Error Message
Diagnosis
The nodes NODEID = [00000194, 00001627 ] have the same node names
NODENAME = '10000000950090 '. This is not allowed because neither node
is a leaf and both nodes are assigned to the same characteristic
0GL_ACCOUNT .
Note that a maximum of 50 characters is available for message variables.
The node name NODENAME = '10000000950090 ' might not be displayed in its
full length.
System Response
Procedure
Try to localize the problem. If the hierarchy is loaded from an SAP
source system, you can check whether the extracted data is correct by
executing transaction RSA3 in the source system. If necessary, check if
the data is modified with a user exit. If the hierarchy is loaded from a
file, check the contents of this file. The problem might also be due to
an error in the transfer rules or in the transformation.
You can identify the two duplicate nodes from the values for the node ID
NODEID = [00000194, 00001627 ].
The problem can be caused by identical nodes delivered more than once
from the source. It is also possible that incorrect values for
parameters such as the node name NODENAME or validity period [DATEFROM,
DATETO] are the cause of the problem.
First check if the value for node name NODENAME = '10000000950090 ' is
correct. The node name consists of the characteristic value for the
hierarchy basic characteristic and the characteristic values of all the
characteristics compounded to this characteristic. Errors creating the
node name often result in duplicate nodes. This problem also occurs if
the node names of all nodes are initial.
If the structure of the hierarchy is defined as time-dependent, the time
validity of a node can be restricted with the fields DATEFROM and
DATETO. Duplicate nodes generally do not occur if the validity intervals
of two nodes do not overlap in time. In this case check if the fields
DATEFROM and DATETO are correctly filled.
In this case the duplicate nodes are not leaves. If you want to reuse an
existing subtree at another location in the hierarchy, you can refer to
this subtree with a link node. Possibly one of the two duplicate nodes
were incorrectly not marked as link nodes.
please Suggest What to do -
How to Link Organizational Structure to a report program
Hi All,
Can anyone pls help me out with my requirement. How can we link a organizational structure created in transaction PPOMW to a report program. Basically i want to send the report output as an XLS attachment to an external email id. For that i need to link Organizational Structure to the report program.
There are many ways of doing it but i want it to be done by linking Organization structure to the report program. Pls help me as soon as possible as its a bit urgent for me.Hi,
Please follow the below function modules and the paramters for reading archived data:
CALL FUNCTION 'ARCHIVE_OPEN_FOR_READ'
EXPORTING
OBJECT = archiving object name
IMPORTING
ARCHIVE_HANDLE = archive read handle
Then in the loop(DO-ENDDO), use this FM:
DO.
CALL FUNCTION 'ARCHIVE_GET_NEXT_OBJECT'
EXPORTING
archive_handle = archive read handle
Then records from the data objects using this FM:
CALL FUNCTION 'ARCHIVE_GET_TABLE'
EXPORTING
archive_handle = archive read handle
record_structure = 'TABLENAME'
all_records_of_object = 'X'
automatic_conversion = 'X'
TABLES
table = internal table for which you want to retrieve records.
ENDDO.
Then close the archive file using this FM:
CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
EXPORTING
archive_handle = archive read handle
This will help u in reading archived data from archive file.
may give some idea also on how to code the read prgram.
Thanks,
Shamim -
Show all the structure in the Query
Hi people,
I would like to know if there is some way to show all the structure I created by hierarchy to my query, enven if some nodes there isn´t any data.
I have configurated to show only the lines there is amount. It means it won´t show the lines that have zeros.
But the structure (all of the nodes) I would like to show, include that one there aren´t any datas.
Thanks in advance,
Rosana.Jaya,
You are 10. It worked!.
I only will leave opened this request yet because I would like a new suggestion.
For exemple, I have the hierarchy but on the side "colum" I already have a structure where is restricted by data because it is a report "Year to Date".
On this case, is it possible to do something to show all the structure of the hierarchy?
Ps.: If it is necessary close this request and open a new one, you can tell me ok?
Thanks a lot,
Rosana. -
Unable to view the document- related to territory management?
Hi
In our project, the users are assigned to the territories via org positions. In a typical instance, out of the two users assigned to the same territories, one is able to view a document and the other is not. I have checked the position/ territory validity as well and everything seems to be right. The transaction is Budget Posting ( a custom one used in TFM scenario) and it doesnt have the check for territory management (otherwise usual in transaction types). Can someone give some pointers to solve this issue? The system is 6.0.Verify that you installed correct version of System Center 2012 Visual studio authoring extensions successfully
http://www.microsoft.com/en-us/download/details.aspx?id=30169
Also you can refer below link
http://blogs.technet.com/b/manageabilityguys/archive/2013/10/20/visual-studio-authoring-extensions-for-visual-studio-2010-2012-2013-available-now.aspx
Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer). -
Extract Structure of the DataSource is invalid
Hi Experts,
We are trying to transport a Z datasource from Development to Production. This datasource is special in the snese that it has been created from Association Analysis model in SAP BW Data Mining Workbench. However, when we are transporting this Datasource to Production we are gatting an error saying
*Post-import method RSA2_DSOURCE_AFTER_IMPORT started for OSOA L, date and time: 20111104162458
Extract structure /BIC/0CADX000030 is not active
The extract structure /BIC/0CADX000030 of the DataSource Z_RSDME_AX_DS_0030 is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L*
Now i understand that it is not possible to transport Extract Structure from one system to another and i have to manually create the Datasource in Production and then retransport my request again. I will generate the Datasource by clicking on the "Maintain Datasource" button present in the Association Analysis model. Now my question is that when i am manually creating the Datasource in Production will it have the same name as that in Development? (ie Z_RSDME_AX_DS_0030 and also because the system manually assigns a name to these types of DataSources and i wont be able to edit the Technical Name). This is very important since i have transformations from that Datasource to an ODS and hence the name should be in sync in both Dev and Production.
So, will it have the same name in Production if i try to manually create it?
This is very urgent and so i am really looking forward to your suggestions.
Thanks in advance,
Appu.Hi,
I think this repeated post ,If not check the below link
Extract Structure of the DataSource is invalid
Regards,
Satya -
Hi
Could someone tell me abt the use territory management on
top of organizational structure?
In my company, we are starting the implementation of sap crm. We are considering the use of territory management. However all attributes we would use are already maintained in the organizational model existing in R/3. Are there advantages we should consider to justify that we would have to maintain the org model and the territories?
thankshi
territory assignment is always at the topmost level.it is standard practice being followed in CRM
see the advantage is that when you do segmentation you can use territory for the segmentation purpose
as you said you ahve your entire org structure maintained and all the attributes assigned to it
so now you have entire thing ready ,having territory gives you the upperhand in that when you just assign attributes to the territory ,it will be automatically assigned to the entire org structure
you tell yourself that what will be more easy assigning position 100 times or assigning just 1 time so that for single assignment 100 assignment takes place
so this way territory give you useful enhancement to do your segmentation under condtion that you have your org structure ready with the attributes.
else you wont be able to use this utility.
for more info please go through this link
http://help.sap.com/saphelp_crm60/helpdata/en/b6/030950eec841d889b8ba2a78a1fcd4/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/45/d9fc5b8eb35709e10000000a114a6b/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/de/d2fab855024f8d936fea84e9b9b551/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/5b33cff36126a9e10000000a1553f7/frameset.htm
after going through these you will get to know the advantage you can get having territory in your oprg structure at the top most level -
Unable to view documents - related to territory management?
Hi
In our project, the users are assigned to the territories via org positions. In a typical instance, out of the two users assigned to the same territories, one is able to view a document and the other is not. I have checked the position/ territory validity as well and everything seems to be right. The transaction is Budget Posting ( a custom one used in TFM scenario) and it doesnt have the check for territory management (otherwise usual in transaction types). Can someone give some pointers to solve this issue? The system is 6.0.I pressume that this is not authorization issue.
Try check this..
Does the parameter for you is same like your teammate? (Transaction SU3)
To access the IXOS is there any custom table maintained to enter authentic user ID. Likely to chek with ABAPer.
In order to reset your user buffer go to SU56 and from the menu you will have option to rest the buffer. Alternatively you can get Security guys to do it in SU01(depends on table entry)/PFCG/PFUD...
Regards,
Arpan Paik -
I want one JSP which can handle the Hierarchy of links
Current System
EZStore page has a feature that allows static page content distribution to the store users. Currently this hierarchy information is stored in a database table and the content is stored in a directory on the web server. When changes are need to the site the developer is currently hand writing the SQL and routing GWI tickets to the DBA�s.
Modifications
Need to modify the process by providing a way to manage the content. Develop a JSP page that contains the necessary fields and should be able to add and modify the links. The page should store the hierarchy information in the database and the documents on the web server. The documents are stored on the web server in docs folder. The table structure is as follows and is located on server: ezdev, database: ezreports.Welcome to the Apple community Yao.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock. -
Change the attribute structure of a dynamic query object
Hi,
As seen below, the attribute structure is a Z structure..
I want to revert/change it to the std structure CRMT_BUPA_IL_HEADER_SEARCH
I don't find any display/change buttons there...how do I achieve it?
Thanks
MadhukarHI Deepika,
Thanks For your reply...
My component - BT116S_SRVO.
I have added Customer appointment date and customer appointment time and prodcut delivery statud date and prodcut delivery time in service order reslut screen.By using AET i have created all the feilds and ihave added same fields in result screen...
Now in component - BT116S_SRVO , ihave implemented the logic of getter method of CUSTOMER appointment date is as follows.,Now date and time is coming..but it is perfromance problem na..so for avoid this issue we need to do in BADI implementation rite?could you please tell me the steps and how to implement the logic..please help
GETTER METHOD
DATA: current TYPE REF TO if_bol_bo_property_access.
DATA: dref TYPE REF TO data,
lv_guid TYPE crmt_genil_object_guid.
value = ' '. "#EC NOTEXT
IF iterator IS BOUND.
current = iterator->get_current( ).
ELSE.
current = collection_wrapper->get_current( ).
ENDIF.
lv_guid = current->get_property_as_string( iv_attr_name = 'GUID' ).
DATA : lr_current TYPE REF TO cl_crm_bol_entity,
lr_parent TYPE REF TO cl_crm_bol_entity.
* lv_guid TYPE crmt_genil_object_guid.
DATA : lv_appt_type TYPE string.
DATA : lv_time_from TYPE string.
DATA:
lt_header_guid TYPE crmt_object_guid_tab,
lt_orderadm_h TYPE crmt_orderadm_h_wrkt,
lt_orderadm_i TYPE crmt_orderadm_i_wrkt,
ls_requested TYPE crmt_object_name,
lt_requested TYPE crmt_object_name_tab,
lt_appointment_wrk TYPE crmt_appointment_wrkt,
ls_appointment_wrk TYPE crmt_appointment_wrk.
INSERT lv_guid INTO TABLE lt_header_guid.
ls_requested = 'APPOINTMENT'.
INSERT ls_requested INTO TABLE lt_requested.
* append ls_requested to lt_requested.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
it_header_guid = lt_header_guid
it_requested_objects = lt_requested
IMPORTING
* et_orderadm_h = lt_orderadm_h
et_appointment = lt_appointment_wrk
* CHANGING
* CV_LOG_HANDLE =
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
no_change_allowed = 6
OTHERS = 7.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
READ TABLE lt_appointment_wrk INTO ls_appointment_wrk WITH KEY appt_type = 'ZCST_APT'.
IF sy-subrc EQ 0.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = ls_appointment_wrk-date_from
IMPORTING
date_external = value
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
ENDIF.
Thanks
Kalpana -
How to create Formulas in the hierarchy structure
Hi,
Is it possible to create formula with in the hierarchy structure, so that the both hierarchy drill down and the created formulas can be displayed at the query output. Please give the valued suggestions.
Thanks
VEERU.Hello
You have in this case to create a structure and select the node concerned in your hierarchy.
Then create a new formula based on your previous selection for example.
Rgds -
How to restore the "Linked" attribute of a picture to "false"?
Just after importing a picture, the "linked" attribute of the
picture member is "false". When distributed, the data of picture is
packed in the DCR file.
If some lingo code changed the "filename" of the member,
like follow:
member("MyPicMember").filename = ".\NewPicture.jpg"
The content of the picture would be changed. And as a
result, the "linked" attribute of the member would be changed to
"true" at the same time. A triangle appears on top right conner of
the icon of the picture member. If distributed again at this time,
the data of picture is not packed in DCR file. Picture file must
exist beside the DCR.
Now I want to restore the "linked" to "false" (because I
want to write new projects based on the old, I want to let the
picture data in the DCR again). I found it is difficult to restore
it. The "linked" attribute can not be modified, whether in Property
Inspector or in code. I found the only method is delete the member
and import again, manually, one by one. But there are many pictures
in my program, so it makes me tired.
Anyone tell me a good method to restore them? I hope it can
use code to do it.put the following handler in a movie script:
on mUnlinkBitmaps
cl = the activecastlib
sel = the selection of castlib cl
anz = sel.count
repeat with n = 1 to anz
repeat with m = sel[n][1] to sel[n][2]
memref = member(m, cl)
if memref.type = #bitmap then
fname = memref.filename
if fname.length then
memref.importfileinto(fname, [#trimwhitespace:0])
put "imported:"&&memref
end if
end if
end repeat
end repeat
end
select the members you want to import (or "select all" to
import all linked bitmaps) and type
mUnlinkBitmaps
into the message window and press return.
you can also take a look at my handlermenu tool:
http://www.farbflash.de/cgi-bin/blosxom.cgi/Dokumente/Director/Tools/handlermenu.html
which has this among other authoring utilities in the
utilities menu. -
Error in the hierarchy structure - Data Load Failure
Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies -
How to create the Hierarchy Structure in BeX
Hi,
We have a cost center IOBJ MD, and our source system does not have the feasibility to create hierarchy to load it. But the business gave a hiearchy structure in flat file, and want to get the cost center hierarchy in bex.
How do we do that ? Please suggest.
Thanks
RKHi,
A hierarchy can be created in the system by two ways:
By hand:
I would recomend to create by hand if the hierarchy has a few nodes or if the hierarchy will stay without changes for long.
RSA1 --> Look for your infoobject and "create hierarchy". Then, you can create the folders and nodes that you need and dont forget activate it
This option is the quickest and easier, if you could go for it.
Loaded by flat file.
If the hierarchy has many many nodes or if it will change its values quite often, it will be a good idea to develop stractors, infopackage and so on for loading the information from file file.
There are plenty of information of the Internet about how to do it.
From my own experience, it would be easier to build the extractor in the old version (rsa1old).
I hope that it helps! -
Link / MAP an Lov selection list to the Hierarchy Viewer.
Hi,
I have created both a hierarchy viewer and an LOV af:selectOneChoice; both are appearing correctly on screen. I simple (hopefully) just want to link the selection made on the LOV / combo box to the Hierarchy viewer, such that when a user selects a value from the Lov/ComboBox the hierarchy viewer is updated. I am new to ADF, in Javascript with EXTJS or Jquery this is simple, but I cant figure out how to implement this feature in the Hierarchy viewer.
any help much appreciated.
Darragh.thanks Ankit for replying; I change the SOC to an inputListOfValues instead, but the same idea applies
I have two underlying View Objects. For the ViewObject on the HV I also have a View Criteria and once the user selects from the LOV I need to remove the default View Criteria and apply another. I know I can implement the following code
ViewCriteria vc = getViewCriteria("setEmployee");
vc.resetCriteria(); //removes any existing View Criteria.
setemployeeidbind(x); //this is the employee number
applyViewCriteria(vc);
executeQuery();
I want to execute the above code once the user has selected a new user. I decided to change SOC to a inputListOfValues and I created a managed Bean to caputure the returnPopupListener, I now have the employee number selected by the user. I was hoping to now refresh the HV, remove the current ViewCriteria and apply a new vew Criteria. So basically I want to implement the above code when the user closes the pop up search. I am using the following code to get the handle to the ApplicationModule and the ViewObject
BindingContext bcc = BindingContext.getCurrent();
DCDataControl dc = bcc.findDataControl("AppModuleDataControl");
ApplicationModule am = dc.getApplicationModule();
ViewObject VO = am.findViewObject("EmpDetails1");
Now, I simply want to remove the existing view criteria and set the bind variable. As I say I am very new to ADF I really feel stupid asking these Questions as in PL/SQL / JavaScript etc this is very easy to do
Maybe you are looking for
-
What sort of input should be given to the FP-DO-410 module to generate discrete output
We are using a FP-DO-410 module for creating discrete output.Can we use it to generate swept square wave pulses
-
I'm having trouble finding out if I have the necessary components and updates to perform the Windows 8.1 Update installation. I am running Windows 8 x64 OS on a Satellite c855-s5118. I've tried 2-3 times to run the update from windows store and it d
-
Layout adjustment in Forms 9i?
I have developed an ERP using Forms 9i. I have kept my development workstation on 1024x768 screen resolution. This works fine on all the clients, which have the same resolution. But, if I change resolution on my development machine to 640x480 or 600x
-
Maintenance Dialog is missing or not maintaned
Hey...I am new in ABAP. I created a function group in dev environment and this function group consists of a database table with maintenance view and it has a transaction code. After I transport into quality environment, when i execute the the transac
-
Can't edit narrator field for audiobooks in iTunes
I noticed a new "narrator" field in iTunes for the Audiobook media kind, but I can't edit it. Also, I can't seem to edit the "Remember playback position" and "Skip when shuffling" options. I can fix the second issue by changing it to Music media kind