Link between ABC Indicator and Priority
Hi friends,
My client requires the Link between ABC Indicator and Priority. i.e., While creation of notification, based on the ABC indicator assigned in the Equipment, Priority should be selected.
Is it possible, if possible please help me out to resolve this issue.
With Best Regards,
Dev
Hello,
Yes you can acheive this by Development use the Below User Exit or Fubctional Module to get it done
User Exit-->QQMA0014 QM/PM/SM: Checks before saving a notification
BADI-->NOTIF_EVENT_SAVE Change When Saving Notification
When Notification create against the Equipment which Having ABC Indicator it will stop Notification while Saving the Notification By checking The ABC Indicator on Equipment and Proposes Priority which You already defined in Configuration with Proposed New Dates for Notification Completion Dates.Notification save allowed once you fill Exact value of Priority.
Regards,
Rakesh
Similar Messages
-
Link between structure indicator and labellig system (PM-FL)
Hello,
I'm facing a problem to associate one of my alternative label with a precise structure indicator.
In our system (R/3 4.6c), we have activated the alternative system in order to use a 40-char-long label for our functional locations. We also created a structure indicator to represent these 40 characters.
When changing this alternatice label, the system shows the structure indicator of the main label. On my opinion, it is normal because I've found no customizing point that allows me to link the alternative labelling and the structure indicator. Am I wrong?
If you ever encountered this problem, could you please help me find a way to solve it?
Best regards,
AnnabelleHello,
sorry I couldn't answer your question sooner.
The situation is this one :
- functional locations have assigned primary labels. These labels are created according 43 (out of 44) structure-indicators which help in representing a structure of technical objects. Thanks to the object type, we created a link between object type and structure indicator through a specific table.
- Two functional locations can have the same ID with distinct localisations.
- a secondary label has been created in order to generate a 40-character-long ID that is necessary to have a unique ID for each functional location.
- We have a specific structure indicator (the 44th) that represents a 40-character-long text.
As both labels are mandatory in the solution, is there a customizing point where we can link a non-primary label with a defined structure-indicator?
Thanks for your help.
Annabelle -
Hi
I have posted advance payment in f-48
and Invoice verification also over in MIRO
Then how we can give link between f-48 and MIROHi,
You have posted down payment, so this amount remains in separate recon. a/c with special GL indicator.
First of all you have to transfer/clear this amount to normal GL account through transaction F-54.
If you have received full inv. amount as advance, you can clear both Inv & Payment line items.(F-44)
Otherwise you have to clear these line items when you receive remaining bal. amount of the invoice.
Rgds
Murali. N -
HI,
what is the link between 2lis_03_bf,2lis_03_bx and 2lis_03_uM.is these datasources to be loaded in the order.can anybody explain meHi
These three datasources are related to inventory. BF is for opening stock, BX is for material movements and UM is valuations. Before loading this data into BW you need to maintain some settings in R/3 side.
According to SAP NOTE:315880.T-code BF11.Activate the flag NDI will reflect in table "TBE11" For the entry "NDI".
2. set the application indicator 'BW' to active using Transaction 'BF11' . which will make tick mark(x) for the field AKTIV for the APPLK ='BW' in table TBE11.
3. Activate the PROCESSKEY under "Maintain Industry Sector"
4. Generated "STOCK INITIALIZATION" for 2LIS_03_BX.
5. Filled setup tables for "INVENTORY CONTROLLING"
6. Scheduled the InfoPackage for 2LIS_03_BX with update mode "GENERATE INITIAL STATUS.
then load BF and UM
There is a PDF available how to load inventory..just search for it in SDN.
REgards
Ram -
How can i create link between ipad(xcode) and webserver?
Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thxI think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database -
Link between Schedule lines and delivery quantity
Hi all,
At the item level in a sales order, can anyone tell me the link between schedule line data and delivered quantity.
Schedule line data can be found in VBEP and delivery qty can be found in LIPS. But I want the link between the two. For which partcular date in the schedule line item the delivery qty is displayed.
Thanks in advance.Hi Amol and Rahul,
Actually I dont want the link between sale order and delivery, I want the link between schedule line dates and delivery qty.
Hope I am clear.
Thanks in advance.
Edited by: Rajini R M on Sep 11, 2008 6:12 AM -
Is there any link between movement types and documents
hi
is there any link between sales doc and movement types ?
is it the only source dependig on schedule line movement type will determined?
if with out order we are doing delivery how system will determine movement type
Thanks in advanceHi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM -
Link Between Service Notification and Sales Order
Hi All,
In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated without updating the VBFA Table or is there any other table gets updated for this flow.
Please guide me.
With Regards
Vinu.NHello Vinu
For one Sales Order # figures in Notification header table- VIQMEL-VBELN.
Similarly Notification # figures in Sales Order Header table- VBAK-QMNUM
That is a solid link right there.
I Also guess technical objects like Equipment, Serial number also form link between the Sales and Service Documents.
Also check out the logic in document flow program RIBELF20, may be it will give you the clues to the problem.
Hope this helps. -
Link between process order and sales order for planning strategy 52
Hello,
I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
Is anybody there with similar customer requirements or project experiences?
Thanks in advance,
Joerg
Message was edited by:
Jörg DemtschukHi Jorg,
To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
You need to take the help of ABAP expert for this,
Regards,
Prasobh
Reward points if this was useful -
Link between Credit Memo and Dispute Case
Hi,
Please help me. How to Link between Credit Memo and Dispute Case
Thaks,
Vinod.Linking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard -
Link between Purchase order and Attachment list
Hi All,
I got a requirement like Purchase orders are from moved from one system to another system.There was a bug in BDC program
so some Attachment list of the purchase orders are not moved properly to the another system.
Now my client want a report to generate the Purchase orders which is having attachment list.
I did not find any table link between Purcahase order and Attachment list.
So Plz provide me the link between purchase order and attachment list.
Thanks,
RamYou mean service for object services?
if yes then u have to create one custom report for Generic Object Services ( like notes , attachment , url ) -
Link between EKKO, EKPO and KONP
Hi,
can someone help me out to trace the link between EKKO, EKPO and KONP tables?
regards,
ravi.Hi Ravi
KONP is conditions table.
If we need the conditions(prices) of a purchase order, we can get it from EKKO, EKPO & KONV.
1. Extract KNUMV from EKKO.
2. Using EKKO-KNUMV - Extract conditions from KONV where KONV-KNUMV = EKKO-KNUMV.
3. We can find item prices where KONV-KPOSN = EKPO-EBELP.
Hope this helps you.
Kind Regards
Eswar -
DB link between Oracle 9i and MS SQL server2000
Hi,
Is it possible to create a DB link between Oracle 9i and MS SQL server 2000.
If it is possible what are the different ways of creating it.
Is it possible without purchasing any propietery drivers.
Thanks,
RohitI've never seen any documents stating that the enterprise edition is a requirement for the heterogeneous connectivity ....
There are 2 ways to set up the connection with MS SQL - using generic connectivity driver (OLE DB or ODBC) or using the Oracle Transparent Gateway.
The generic connectivity is free and comes with Oracle DB - it has several limitations - for example you can't call MS SQL stored procedures from Oracle.
The Oracle Transparent Gateways are packaged , the MS SQL gateway is part of the Open System Gateways package ($15,000.00 per CPU license cost) and i has less restrictions.
Overview:
http://www.oracle.com/technology/products/oracle9i/datasheets/gateways/gateway_rel2_ds.html
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96544/toc.htm
Chapter 4 - the Oracle Transparent Gateway
Chapter 7 - the free Generic connectivity.
Mike -
Table link between contract document and billing document
Hi,
Please let me know the table link between contract data and its billing plan nnumber.
Regards,
bhaarathi.VBKD is the Table name
if Ordertype "G" <--- that means It is a contract
From VBAK and VBAP you can get the Contract Details for the Order Type "G"
Go to Table VBKD, with the contract and get the billing plan .
FPLNR <--- is the Billing plan
Here you get the relation Between Contract and Billing Plan -
Link between outbound delivery and matriel documents of good receip
HI,
in which table we can find the link between outbound delivery and matriel documents of good receipt.
thanksHi!,
If you have posted a goods receipt for an outbound delivery, you should find in the header table MKPF for the material document the field MKPF-XBLNR completed with the outbound delivery number.
Then, if the document flow for the delivery has been updated correctly, in the table VBFA for the delivery (VBFA-VBELV), you should find the material document under VBFA-VBELN.
I hope this helps you!
Best regards,
Esther.
Maybe you are looking for
-
Hi After i upgraded to 10.8.2 i am seeing my MAc got slow. And my memory is 4gb , if i increase the memory will the system become faster. Can we get it done this in Apple store .OR without upgrading hte memory cna we make this ystem to run faster ?
-
Urgent! Cancel or delete an WI in other Fork's leg
Friends, Now, I need to find a better way to do a Cancel/Reexecute process. I'm developing in 46C and I've got some Sub-wf's in sequence... Receive's Protocol -> MIGO -> MIRO, that are called in this sequence in the Super-WF. This flow has to be prep
-
Having trouble saving txt files
everythin's workin fine. but only a part of the txt file i have saved can be seen on my ipod nano......like the first 10 pages or somethin, the it wont scroll down....any help would be greatly appreciated guys
-
Hi Experts , I need some tablesrelated to Workflow to avoid the use of standard WAPI as it is having performance issue . 1. Table which can give all the dependant workitems of a parent workitem ID - (Workflow workitem id ) 2. Table for Getting t
-
My Log and Transfer window is not displaying properly in Final Cut Pro 7.0.3
I installed an add-in to import files from a Canon FX-100 camera. When I tried to work with some files that had been recorded on this camera, the left panel of the Log and Transfer screen disappeared. Nothing that I have tried - stretching or expa