Link between an IMAC and a NMT HDX 1000 via Ethernet

Hello,
I have been trying to establish a link between my IMAC (OS X Lion 10.7.4) and a NMT HDX 1000 via a router Sagem Livebox / Ethernet cable.
I am able to see the HDX connected to the router with IP 192.168.1.12 but when I entrer the command : "afp://smb\\192.168.1.12\share" I always get the message : "The connection to the server smb failed".
Can anyone help. Thanks a lot.
Roger
Var / France

I have an iMac running Snow Leopard connected by Ethernet cable to the internet via a wireless-capable modem running at 5mbps.
What is the make & model of this wireless-capable modem? If it is not an Apple product, then extending it with an AirPort Express (at least not by wireless) will not work.
Assuming that it is not an Apple product, then the only other choice would be to connect the Apple TV by Ethernet. However, I can certainly understand if Ethernet is not desireable or practical ... so an alternative to that would be to use Powerline adapters. These adapters take advantage of your home's electrical circuit to create a pseudo Ethernet one. You would then need at least two of these adapters to be placed at the locations of the wireless modem and the Apple TV. Each adapter would be connected to an electrical wall outlet and a short Ethernet cable would run between the adapter and the device (modem & Apple TV) to complete the circuit.

Similar Messages

How do I transfer files between my iMac and my MacBook Pro using an ethernet cable (not with AirPort)?

Even though I connect my computers with an ethernet cable the files are still being transferred wirelessly. I can tell because the transfers (usually around 4GB) take a few minutes with AirPort off, but 30 minutes to an hour with AirPort on. I want to transer the files and still have AirPort on since I work on both computers at the same time and want to maintain the connection to the internet.

Be sure Ethernet is listed first in System Prefs > Network.
If it isn't, click the "gear" icon and select Set Service Order.

How can I sync my calendars (between my iMac and Apple devices (iPhone

How can I sync my calendars (between my iMac and Apple devices (iPhone and iPad)?
I have an Apple Mac Book Pro OSX 10.9.3 8 GB and I have the iPhone 5S and a recent iPad also.
Would like to link my calendars and has not been successful in doing so.
Can someone walk me through the steps? Thanks.

Use iCloud:
iPhone/iPad:
Switch on in Settings > iCloud > Calendars On
Mac:
 > Systems Preferences... > iCloud > Calendars checked
Read here:
iCloud: Troubleshooting iCloud Calendar

TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

How can i create link between ipad(xcode) and webserver?

Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thx

I think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database

Link between Schedule lines and delivery quantity

Hi all,
At the item level in a sales order, can anyone tell me the link between schedule line data and delivered quantity.
Schedule line data can be found in VBEP and delivery qty can be found in LIPS. But I want the link between the two. For which partcular date in the schedule line item the delivery qty is displayed.
Thanks in advance.

Hi Amol and Rahul,
Actually I dont want the link between sale order and delivery, I want the link between schedule line dates and delivery qty.
Hope I am clear.
Thanks in advance.
Edited by: Rajini R M on Sep 11, 2008 6:12 AM

Is there any link between movement types and documents

hi
is there any link between sales doc and movement types ?
is it the only source dependig on schedule line movement type will determined?
if with out order we are doing delivery how system will determine movement type
Thanks in advance

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

Link Between Service Notification and Sales Order

Hi All,
In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated without updating the VBFA Table or is there any other table gets updated for this flow.
Please guide me.
With Regards
Vinu.N

Hello Vinu
For one Sales Order # figures in Notification header table- VIQMEL-VBELN.
Similarly Notification # figures in Sales Order Header table- VBAK-QMNUM
That is a solid link right there.
I Also guess technical objects like Equipment, Serial number also form link between the Sales and Service Documents.
Also check out the logic in document flow program RIBELF20, may be it will give you the clues to the problem.
Hope this helps.

Link between process order and sales order for planning strategy 52

Hello,
I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
Is anybody there with similar customer requirements or project experiences?
Thanks in advance,
Joerg
Message was edited by:
Jörg Demtschuk

Hi Jorg,
To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
You need to take the help of ABAP expert for this,
Regards,
Prasobh
Reward points if this was useful

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad. I need help

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
Please help!

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
Please help!

I can't get a thunderbolt connection to work between my iMac and new macbook air

I would like to establish a connection between my iMac and new macbook air using a thunderbolt connector. Nothing seems to happen when I plug the cable in to each device. When I open Settings/Network it shows up the Thunderbolt bridge as 'Not Connected' on the MacBook and as 'Some Connected' on the iMac. I have no problems with connecting another device (iPad) to the iMac. Can anyone help please?

Nothing happens when I try to boot up using the command+R keys.
Did you hold down those keys before booting and continue till you get to a selections window? You should get this:
If you can't boot into the Recovery volume make an appointment with the nearest Apple Genius bar for a diagnosis. You're still under warranty.

How do i set a peer to peer network between my iMac and windows machines?

I want to set up a peer to peer network between my iMac and Windows based computers in my house. I also want it to a wireless set up. Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

I'm trying to connect my MacBook Pro to Wifi using internet sharing
Why?
Just connect the MacBook to the same internet as your iMac.
MacBook > Wi-Fi router > Internet.
You are connected to the internet with your iMac.
iMac > Wi-Fi router > Internet
Why do you want to go MacBook (via Wi-Fi) > iMac > Wi-Fi router > Internet?

How to share a HP Laserjet between a iMac and a PC Laptop

I have been sharing a HP Laserjet 1200 between my iMac and a Toshiba Satellite laptop for years by using the USB port for the iMac, and using the parallel port for the PC. This has worked great for years. I've just purchased a new laptop, and it no longer has a parallel port. Is there a way for me to still connect the printer to both computers? I also have a Color LaserJet 2600n, does the 'n' means wireless? The 2600n is only connected to the iMac, being I don't use it much. Most of my printing comes off the Laserjet 1200, for both computers and would really like to keep it like that. I've also just purchased Snow Leopard for the iMac, just haven't gotten a chance to install it yet. Upgrading one machine at a time. First I need to print from both machines. Any help would be appreciate it! Thank you.

Hi Barney,
Finally got a chance to download Bonjour for Windows to my laptop late last night, and after a few tries (to get the correct driver for that old HP1200...), it worked! The original driver disc wouldn't work, guess it was just too old. But was able to get one from HP web site. Anyway, thank you so very much. Though I have to make sure the Mac is on when I want to print from the laptop, as the printers are on sharing, they're right next to each other and I tend to work off both at the same time anyway, so it's not a big deal. Sometimes over the weekend, I will play with the wires some more to do what you and Bruce suggested, and make sure the mac and the 2600 is connected via Ethernet, not USB. Right now the 1200 is connected directly to the Netgear, but doesn't seem to work as a server. Oh well. Again, thank you for your suggestions. It was of great help!

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Is there Apple software that will work on the notebook allowing me to open Pages, Numbers or Keynote documents that I've placed in Dropbox?

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Anyone know if there is Apple software that will work on the Toshiba that will allow me to open Pages, Numbers or Keynote documents when I access them in Dropbox?
Maybe I should just always export from Pages into Word (and likewise for the other types) before I upload to Dropbox? I hope not!!

If you don't want to export files and consider the Microsoft formats to be your basic working format, then you need to consider either using MsOffice for Mac or LibreOffice instead of the iWork suite.
You could always run a virtualised OSX on the Toshiba, but I don't think Apple will appreciate me telling you how to do that.
Peter

Link between Credit Memo and Dispute Case

Hi,
Please help me. How to Link between Credit Memo and Dispute Case
Thaks,
Vinod.

Linking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard

Link between an IMAC and a NMT HDX 1000 via Ethernet

Similar Messages

Maybe you are looking for