Link between Aperture and iTunes doesn't work

Hi,
i have the problem that i can not load photos through iTunes on my iPhone or iPad because iTunes can not find my Aperture Library.
In Aperture itself i have the setting enabled, that other program can use thumbnails.
Some Tipps for me?

Hi leonie, thank you very much for replying.  I'm sorry for the vauge "error description"
iTunes complains = Aperture Library cannot be found (same error as before)
My library is contained on an external HFS+ formatted USB drive.  I know other programs can see the library because my screeensaver shows photos from it.
As for your soultion, that didn't fix it unfortunately
But I did end up figuring out a solution: I don't know why iTunes was so fixated on the original library aperture created on my OS drive in the "Photos" directory (which is now a very limited space SSD).  Even if I created a new library located on my OS drive, it "wouldn't find it" when I switched to it.  So for the solution, I moved (not copied, but moved) the original library to the exact same location as the one on the USB HDD.  Changed the library to the "original one" located now on my USB hdd.  Merged in the one that had all my photos.  iTunes now can see my library located on my HFS+ formatted USB hard drive. *WHEW* I hope that helps someone else out.

Similar Messages

  • Synchronisation between web and desktop doesn't work anymore (update)

    Before today, I could synchronize my files between Web and my Desktop. It doesn't work anymore.
    It tells me "Available soon"... It worked fine until today...
    >>> That's ok, it's working again since a few minutes...

    The problem is on the PC with Windows 7... where iTunes doesn't work anymore.

  • Install from scratch 3 times Mavericks but cannot used my restore it will just start for ever. After first install and restore mail and link between folder and files didn't work anymore. Now cant see my disk in finder. Help?

    First install through regular update : never finishing the start after automatic restart
    First install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only - Mail crashed each 5 inutes and asked constantly for password of my 2 accounts, links between folders and files not OK and attaching a doc was complicated. I downloaded the update same problems
    Second install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - Used Migration Assistant to restore applications and data only and settings : never finishing the start after automatic restart
    Third install from scratch: erase through disk utility, install OS X Mavericks (using Recover mode), restart ok - But no disk available in Finder
    So far no Mac since 3 days ...
    Any help is welcome

    Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
    Because there is a lot more going on under the hood than merely copying files.
    The only way to do what you want is to use cloning software like Carbon Copy Cloner.
    My  advice is to rescue your personal files to a regular non-TimeMachine  external drive, Zero erase the ENTIRE drive and install OS X fresh and  update, then your programs from original sources and files from backup.
    Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
    Most commonly used backup methods
    How to erase and install Snow Leopard 10.6

  • Update to iTunes 11.1.4 fails on Windows 7 and iTunes doesn't work anymore. How will we be able to receive future updates to correct this problem ?

    Now that iTunes doesn't work, how will we be able to receive future updates that corrects this problem ?

    The problem is on the PC with Windows 7... where iTunes doesn't work anymore.

  • Link between 2 SelectOnceChoice component doesn't work.

    Hello all,
    I am using ADF BC, with Jdev version 10.1.3.3.
    Right now I have the requirement to put 2 SelectOneChoice and 1 table component on a new page.
    User select the value in the 1st list box and the value in 2nd list box should change according to the 1st one dynamiclly. After user select the value for the 2nd SelectOneChoice, the table records in the readonly table should also change dyamiclly.
    I have find way to link a SelectOnceChoice to a readonly table, that is create a nested query with view-links and drag the master item and nested view to the page. And set the auto-submit and PartialTriggers properies for them.
    Right now my question is how to make the dynamic change between the 2 SelectOneChoice? I have search the forum for many threads and it seems the #62 example in Steve Muench's blog should be the similiar solution. The link is http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#62
    I have test the example, it works well. And I also make a new page with the table in hr schema, and make link successful, although a little different from the example:
    Create Region EO and RegionView VO(use it to creat regionlist LOV) based on Region table, create Country EO, CountryView VO(use it as base query for the 2 SelectOnceChoice component) and CountriesForRegion VO(use it to creat Country LOV, contains a parameter) based on country table. Then drag region_id and country_id from Data Control Palette to the page and link them to regionlist LOV and Country LOV. Set the 1st SelectOneChoice componnet's ID and autosubmit property and set 2nd SelectOneChoice componnet's PartialTriggers property. Then set the action and revoke action in the page def: use base view's region id as parameter, to create a ExecuteWith Parameters action and create invoke action with renderModel and condition is #{empty requestScope.CountryChanged}
    So far it works well and I don't need to add code in the example coz the link has been created.
    But when I turn to my table, all the thing changed. I have 2 tables contain process infomation and emp name information.
    the process table: processID(PK) and Process name
    the emp name list table : processID, UserID(PK) and Name
    I create the page as I did in above example, use ProcessID as parameter. But nothing happen when I change the value of 1st SelectOnceChoice.
    the where clause in the NameListForProc is: where namelist.PROCESS_ID = :TheProcessID
    and it seems not work. when I change to nvl(:TheProcessID,26) nothing happen.
    when I change to hardcode decode(:TheProcessID,0,0,26) it can retrive valule in the 2nd SelectOnceChoice. I don't know what happen in this place.
    I had suspect the datetype of processID and change number(20,0) to number as in hr tables. nothing happen.
    I also change the parameter to use process name, still no value. the returned :TheProcessID is not null, but I don't why it can't retrieve value as I did in the hr example.
    So I wonder what will impact this process? some setting of VO or some setting in action and revokeaction or some properties or I misssing something in the steps?
    can any one give me some hint? many thanks.
    Scott

    The SelectOneChoice section is:
    <af:selectOneChoice value="#{bindings.ProcessId1.inputValue}"
    label="#{bindings.ProcessId1.label}"
    autoSubmit="true" id="ProcList"
    showRequired="true">
    <f:selectItems value="#{bindings.ProcessId1.items}"/>
    </af:selectOneChoice>
    and the binding list:
    <list StaticList="false" ListOperMode="0" IterBinding="NameViewIterator"
    ListIter="ProcessListIterator" id="ProcessId1" NullValueFlag="1"
    NullValueId="ProcessId1_null">
    <AttrNames>
    <Item Value="ProcessId"/>
    </AttrNames>
    <ListAttrNames>
    <Item Value="ProcessId"/>
    </ListAttrNames>
    <ListDisplayAttrNames>
    <Item Value="ProcessName"/>
    </ListDisplayAttrNames>
    </list>
    Do I need to change the format of SelectOneChoice to add "for each"?
    Message was edited by:
    [email protected]

  • Syncing between Mac and iPhone doesn't work

    I recently upgraded to Mavericks and after that syncing my Mac with my iPhone 5S doesn't work.
    I would like to report syncing bookmarks, contacts, calendars and notes not syncing as a bug, because i find the decision to force me into the cloud to sync these so stupid that I could as well have been using Windows.
    However, nothing else syncs properly. There seems to be a random function deciding which podcasts, iTunes U content etc. that syncs. If I press the sync button several times I get different results every time.
    Does anyone else experience the same thing? Is there a workaround or is it just bad programming from Apples side?

    Hi. Is the iPhone still connected to the WiFi when you separate them? The iPhone must be connected to WiFi for FaceTime to work.

  • Lost Link Between Library and iTunes

    Hi,
    I have moved my itunes files (iTunes Library, with about 50GB of music) onto a external drive connected to my PC via USB.
    When I open iTunes, it opens as usual and shows the list of all files.
    However, iTunes cannot find the music files in their original location because they are now on the external drive.
    Please let me know how to point iTunes to the location on the external drive where the library file can be found.
    I need iTunes to map all songs automatically. I do not want to locate each and every song.
    Regards,

    I just found the answer. Quite simple.
    Press ALT to display menu.
    Go to EDIT  then PREFERENCES
    Click tab that says ADVANCED (far right hand side) of the pop up window.
    Click CHANGE button where it says: ITunes Media Folder Location
    and browse to location where the iTunes Libary & files are stored
    Click OK - it took a couple of minutes to link the songs.

  • Communication between SAP and subsystem doesn't work (SM58)

    Hi,
    we have problems to send IDoc's on a sub-system. In SM59 we have tested the connection -> it's ok. In SM58 there are many records which not processed (status: transaction recorded). The system doesn't send the IDoc's not any longer.
    Any Idea?
    Thanks
    Michael

    are the idocs created if yes then wht is the status of the idocs....
    i think u have to set the partner setting in WE20 and set transfer idocs immediately for the partners

  • ITunes sharing between Mac and PC is not working

    iTunes sharing between Mac and PC is not working. No shared music appears.
    PC = Win XP SP3; 192.168.1.101
    iTunes for Windows 6.0.4.2
    Sharing enabled / Look for shared music enabled / Share entire library
    Open and running on PC
    Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
    MAC = OS X 10.4.6; 192.168.1.100
    iTunes for OS X 6.0.4(3)
    Sharing enabled / Look for shared music enabled / Share entire library
    Open and running on Mac
    System Preferences | Sharing | Services
    Personal file sharing - ON
    Windows file sharing - ON
    Printer sharing - ON
    System Preferences | Sharing | Firewall
    Personal file sharing - ON
    Windows file sharing - ON
    Printer sharing - ON
    iTunes Music Sharing - ON (i.e., TCP 3689 open)
    iPhoto Bonjour Sharing - ON
    Network Time - ON
    ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
    Functioning as DHCP server
    File sharing between Mac & PC works OK
    BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
    Shared music is not visible
    Tried turning both firewalls OFF -- still nothing
    Tried installing Bonjour for Windows -- still nothing
    ANY suggestions? Please help. Thanks.
    1.8 GHz PowerPC G5   Mac OS X (10.4.6)  

    Hi cbafiero,
    It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

  • My iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    my iphone 6 wont turn on after i updated it and it doesn't work to restore it in itunes. what should i do?

    Hello ole-gunnar,
    Thanks for using Apple Support Communities.
    If your iPhone is unresponsive after updating your iOS version, then I'd like you to please follow the troubleshooting below.
    If you see a black screen
    You might need to charge your device before it can turn on. Plug in your device and let it charge for at least 10 minutes (20 minutes for iPad), then try turning it on. 
    You should see a battery icon while your device is charging. If you continue to see a black screen, reset your device. If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Cheers,
    Alex H.

  • I get an error message when I start up itunes.  It says the registry settings for burning are missing and to reinstall itunes.  Well I have done that and it doesn't work! Help

    When I run diagnostics I get error 43 telling me to repair install itunes and that doesn't work either.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

    My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
    The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

    Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
    Thank you. Nick

    Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
    Re: How do I turn off the compatibility mode for ITunes.
    Does that clear up the compatibility message?

  • After setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What;'s going on?

    after setting up iCloud for my iPhone and iPad, syncing the calendars to my desktop PC, via USB and iTunes, doesn't seem to work. What's going on?

    Regarding the USB, see if zapping the PRAM helps.
    Regarding your storage space check out the following: 
    HD Space Checkers:
    Disk Inventory X (FREE)
    WhatSize (SHAREWARE)
    OmniDiskSweeper (FREE)
    GrandPerspective (FREE - donation)
    Mac Performance Guide
    Slimming your hard drive
    ===============
    Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
    http://www.youtube.com/watch?v=fO-mlLApEuk

  • My ipod touch is not syncing, itunes store won't load, and icloud doesn't work!!!!!

    My ipod touch is not syncing, itunes store won't load, and icloud doesn't work!!!!!

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod

Maybe you are looking for