Link between Charm & BC sets

1. I have CHARM activated for my Solman implementation project
2. I have completed my BPR structure & in Solar02 I would like to
Configure in the IMG & save the customising to BC set
3. I get a message that I should use CHARM for customising
I would like to use BC sets to store all my customising, but I cannot
find the link between Change document, BC set & BPR step.

I agree on this one.
However, a naming convention for OSS notes and FRICE is implemented over here.
That's why it would be useful to have an additional column.
The link is somewhere in SAP, because when you go to the tab Project Structure in TA /TMWFLOW/PROJ for the selected Maintenance Cycle, you see which Transport Requests are assigned to which ChaRM msg.
Roel

Similar Messages

ChaRM: link between ChaRM message and Transport Request

We use the action 'Release Transport Requests' in the task list of the
Maintenance Cycle to release all assigned Transport Requests. In the
pop-up window that appears we see all Transport Request numbers and the
transport description.
Is there a possibility to add an extra column in this pop-up screen, to
see the link between the Correction number and the Transport Request?

I agree on this one.
However, a naming convention for OSS notes and FRICE is implemented over here.
That's why it would be useful to have an additional column.
The link is somewhere in SAP, because when you go to the tab Project Structure in TA /TMWFLOW/PROJ for the selected Maintenance Cycle, you see which Transport Requests are assigned to which ChaRM msg.
Roel

Link between implementation project configuration (SOLAR02) and ChaRM?

Dears;
We want to benefit from listing all IMG Objects and developments in an implementation project (SOLAR02) to control our transports as we have ChaRM activated on the affected systems.
But there seems to be no link/control which has several consequences:
*Status of "changes" in ChaRM and related developments in the implementation project have to be tracked seperately
*There is no link between the development in the project (SOLAR02) and the created TR.
*There is no limitation/control in the content of the TR if it concerns items not listed in your project => how to check if the project is up-to-date?
Are my assumptions correct? Or am I forgetting something?
What is the experience in maintaining changes (transports) for implementation project? On what level? Linked with the structure in Solar02 or completely independant?
I have done quite some reading around the topics but documentation around project management via SolMan and ChaRM via SolMan seems never to be really connected? (only the overall status of the project and the activation of charm via SOLAR_PROJECT_ADMIN)

>
Jett Jiang wrote:
> 1. Active Change Request Management. the inter-connect is in SOLAR_PROJECT_ADMIN.
> 2. Use normal correction to control the TRs and updates the documents at the same time.
Thank you for the reply. Concerning these points:
1) This is done... No questions there
2) The "and" in your sentence means that I myself have to do both things? So there is no link?
So this does mean that (what my understanding was) I have to create a normal change via ChaRM but under the project for example a certain business scenario. That developers work on all topics related and should "remember" that if they put something under that transport they should verify if this is documented in the SOLAR02?
If then the change is put to testing they should manually update the status of everything related to this transport in the SOLAR02...

View Link between two query views

Hi is it possible to create a view link between two views having the where clause bind variables.
How you set the bind variables at the run time for the View objects. It is giving hard time for me to use the Master view in the XmlData bean to generate the Xml document.
I am able to set the Master views bind variables, but for view link destination view
where clause bind variables are not able to set ( link object link condition bind variables are binded run time but the views where chause bind variables of destination view are unable to setand bind)
Thanks
null

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

ADF BC: both ID and view link object as getter/setter in row impl

I notice something when generating the row implementation of VO that have links to other VO. I can't seem to find the logic behind it...
Following model:
users( id, address_id,name,firstname,...)
address(id, street,number,...)
their is an assosiation between the UsersEO and the addressEO. Their is also a view link between the UsersVO and the AddressVO based upon the assosiation of the EO's.
When we create the row implementation of the UsersVO we find a getter and setter for both the address_id as well as the address row object.
Why is this?
We have this issue because i added the UsersVO and the addressVO to the app module but i haven't added the link to the appModule but when i create the SDO from the appModule, the Users has both the address_id as the address row object.
THis does not seem to make sense. How do you use it correctly? Do you just need to set the address_id and can leave the row object null or do they both need to have the same? What if you set the address_id to 1 but the id in the address row object is set to 5...
How do the databindings handle these things?
To me it seems more logical that the VO only has a getter and setter for the address object and handles the address_id in the background according to the values in the address object.
Can someone explain me why this is implemented this way and how to handle it correctly?
Edited by: Yannick Ongena on Sep 27, 2010 5:29 PM

Yannick Ongena wrote:
When we create the row implementation of the UsersVO we find a getter and setter for both the address_id as well as the address row object.
Why is this? The definition of the VL allows you to optionally generate accessors for the underliying VOs, i.e. getAddressVO() in the UsersVO and getUsersVO() in the addressVO.
We have this issue because i added the UsersVO and the addressVO to the app module but i haven't added the link to the appModule but when i create the SDO from the appModule, the Users has both the address_id as the address row object. You should add the addressVO to the AM using the VL instead and not by itself.
THis does not seem to make sense. How do you use it correctly? Do you just need to set the address_id and can leave the row object null or do they both need to have the same? What if you set the address_id to 1 but the id in the address row object is set to 5...
As mentioned above, once you add the addressVO to AM using the VL, the framework will take care setting the value of the row objects accordingly.

Link between GTM and FSCM (sales or purchase order hedging)

Hi all,
I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchase or sales order, or two-sided . The flow I want is the following :
-     I buy or sell a product, in GTM, through a trading contract which generates a purchase or sales order.
-     Automatically a currency hedge is generated to cover the risk, in FSCM, I guess in exposure management.
-     And then the financial products (derivatives) are generated as well.
No problem to create the trading contract, no problem to generate the sales or purchase order. But in spite of the (very little) customizing I found in u201CSAP GTM => currency hedgesu201D, and some in FSCM, in u201Ctreasury and risk managementu201D, no way to have this link between GTM and FSCM, no additional document is generated like a Forward Exchange Transaction (I guess I should have this, and then a risk exposure in FSCM).
Would you have an idea ? Is this customizing, or an additional Business Functions or Extension Set not activated ? SAP says : u201Cit worksu201D, but canu2019t find the way.
Thank you very much for your help, I am quite looking for this link for a few days now u2026
Best regards
Patrick

Yes Mr Ashish!
As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
I'll let you know if i find any links.
Regards,
ANSAR

How do i remove the link between my apple ID and my mobile number?

i decided to move away from iPhone a couple of days ago as a result of renewing my contract. When I got my new phone, I factory re-set it and handed it in to my network provider as part of a recycling scheme. Since getting my new phone, when people send me texts they are still sending as iMessages. I have logged onto my iTunes and removed my iPhone from the account but still nothing. How do I completely remove the link between my mobile nuber and iMessenger?

Contact Apple support to deactivated iMessage: https://www.apple.com/support/appleid/contact/

Lost link between iPhoto library and iPhoto.app

While learning how to use Photoshop Elements 4.0 and Bridge, I made the choice to "browse" in Bridge. When I next started iPhoto 6.06, my link to the Library was lost. I have worked with AppleCare support, done every exercise short of creating a new library and losing my organization. With 20,000 + photos I would like to avoid that exercise. I do have backups but am trying to figure out if I can solve this any other way. All my files are still in iPhoto Library, and I can see the organization of my albums in Bridge. With some exercises, I get the message: "Unreadable files: 1. The following file could not be imported: '/Users/john/Pictures/iPhoto Library/Library.iPhoto.'"
If I delete Adobe Photoshop Elements and Bridge from the hard drive, will this help? I promise I did not do anything within iPhoto Library in Finder!
Thanks so much!
iMac Mac OS X (10.4.9) iPhoto 6.06
iMac Mac OS X (10.4.9) iPhoto 6.06
iMac Mac OS X (10.4.9) iPhoto 6.06

cdkayak
Welcome to the Apple Discussions.
There's absolutely no harm in using PSE with iPhoto, it's Bridge that's a killer. So that's what you chuck from your machine. Set up PSE as an external editor in the iPhoto Preferences. That way you can double click a pic in iPhoto and it will open automatically in PSE, save it PSE and have it come back into iPhoto seamlessly.
What's likely happened here is that you have (or Bridge has) made changes in the iPhoto Library Folder which has broken the link between iPhoto and the library files.
Some things to try:
Hold down the option (or alt) key and launch iPhoto. Choose Locate, and point iPhoto at the iPhoto Library Folder.
What Back Ups do you have? If there's an up-to-date one, then try copying the library6.iphoto file from it to the iPhoto Library Folder allowing it to overwrite the confused one.
That said, if these don't work, your options will only be to create and populate a new library: To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Finally, the message
"Unreadable files: 1. The following file could not be imported: '/Users/john/Pictures/iPhoto Library/Library.iPhoto.'"
is because iPhoto will not import a picture that's in the active iPhoto Library Folder - a sensible precaution against duplication.
Regards
TD

Linking between two workspaces

Good afternoon all,
I was wondering if there was anyway for me to link between two workspaces on the same schema.
What I currently have set up is two workspaces (1 and 2). I have done a lot of work on 1 and built a Single Sign On application to manage my applications. Workspace 2 was created for a separate team, but I would like some sort of authentication. I was wondering if there was anyway for me to leverage my existing app in Workspace 1 to authenticate for applications in Workspace 2.
My guess is that it's not possible, but I figured I might as well ask around to see if there is some weird hack around it.
Thanks in advance,
Ivan

Alright I'll post it on there. Figured that InDesign users would know more about the links and how to set them up. Thanks for the advice.

Linking between books for PDF export

Does anyone have any suggestions as to how to go about setting up links between books in such a way that they'll export to PDF? Here's my scenario: I have two books (indb files with many indd files each). One of the books needs to link to text anchors I've set up in the other. However, linking between the files doesn't work because each book is exported as a single PDF. I had planned to merge the files of the book that is being linked to prior to creating the links, but no matter what I try, Move Pages causes reflow (and given the length and intricacy of the documents I'm sure it's not worth the time to try to fix the reflow; I'd be better off linking the PDF by hand).
Is this just not a possible workflow? I considered linking to a 'dummy' file that was named like my second book is named, but from what I can tell ID doesn't really export the text anchors in any usable fashion; you either get the links when you export or you can't massage them into being. Any advice would be appreciated.

This is an interesting suggestion, but I'm not sure how it would work. I've tried outputting one PDF from this combo-indb file and then extracting the pages out into separate PDFs, but the links are lost. I've also tried selecting just the files from each of the actual books within the combo-indb and exporting PDFs for each one, but in that case it assumes it's looking for an anchor within the same PDF. Did you have another approach in mind?

View link between VO from two application modules

Is it possible to create view link between VOs from 2 different Application modules?

Here is what it says:
SymptomsYou have an ADF BC (BC4J) project and you are getting the following error:
oracle.jbo.domain.Number; local class incompatibleA more detailed error looks similar to:
oracle.jbo.domain.Number; local class incompatible: stream classdesc
serialVersionUID = -7171468674200794918, local class serialVersionUID =
-6507359405709672486
CauseThis problem is caused by either that:
You have inadvertently mixed two mutually exclusive domain libraries like "BC4J Generic Domains" (bc4jdomgnrc.jar) and "BC4J Oracle Domains" (bc4jdomorcl.jar).
or
You have added the "BC4J Datum" library (bc4jdatum.jar) to your middle-tier class path, and are trying to use a JDBC driver different from the one that ships with JDeveloper 10g in the box.
The BC4J Generic Domains and the BC4J Oracle Domains are never meant to be used in the same application classpath. They contain different implementations of the same set of classes, one destined for use in Oracle JDBC driver environments, and the other for use with other non-Oracle JDBC drivers.
The BC4J Datum library is designed for use in a thin-client Classpath that is remotely accessing an ADF Business Components middle tier deployed as an EJB Session bean. It contains only the domain classes (typically jar'ed up as part of the whole Oracle JDBC Driver JAR) without having to have the rest of the JDBC Driver JAR on the thin client. SolutionPlease check if any of the above suggested scenarios is applicable to your application.
If you have the BC4J Generic Domains and the BC4J Oracle Domains in the same project despite that they are never meant to be used in the same application classpath you will get this error. They contain different implementations of the same set of classes, one destined for use in Oracle JDBC driver environments, and the other for use with other non-Oracle JDBC drivers.
Goto the Project Properties for you project.
Select Profiles -> <Profile Name> -> Libraries
Check in the Selected list (to the right) if you have both BC4J Generic Domains and the BC4J Oracle Domains there. If so, remove the one not appropriate for your project.

Link between invoice no and payment clearing document no

Hi sap gurus,
in a reoprt i have to show the payment receive date against the invoice no. i can have the invoice no by customer no (KUNNR) and date range. now i am facing problem how to link invoice document no with payment clearing document no. Because while receiving payment from customer (t code F-28) we are receiving against a invoice. But i checked in BSEG,BSID BSAD but nowhere i was able to track the linkage. Please help.
regards,
BKR

In billing document at header level, you can see two fields, viz.
a) XBLNR Reference Document Number and
b) ZUONR Assignment number
These two fields you can see in FBL5N. Whatever copy control you set in VTFL at header level for these two fields, based on that values will be populated in billing document which will then be passed on to FI just for information.
But these two fields are not stored in any table but in structure. However, you can check in BKPF with field XBLNR which will have link between VBRK (billing document ) and BKPF (Accounting document)
thanks
G. Lakshmipathi

DB link between Oracle 9i and MS SQL server2000

Hi,
Is it possible to create a DB link between Oracle 9i and MS SQL server 2000.
If it is possible what are the different ways of creating it.
Is it possible without purchasing any propietery drivers.
Thanks,
Rohit

I've never seen any documents stating that the enterprise edition is a requirement for the heterogeneous connectivity ....
There are 2 ways to set up the connection with MS SQL - using generic connectivity driver (OLE DB or ODBC) or using the Oracle Transparent Gateway.
The generic connectivity is free and comes with Oracle DB - it has several limitations - for example you can't call MS SQL stored procedures from Oracle.
The Oracle Transparent Gateways are packaged , the MS SQL gateway is part of the Open System Gateways package ($15,000.00 per CPU license cost) and i has less restrictions.
Overview:
http://www.oracle.com/technology/products/oracle9i/datasheets/gateways/gateway_rel2_ds.html
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96544/toc.htm
Chapter 4 - the Oracle Transparent Gateway
Chapter 7 - the free Generic connectivity.
Mike

Table Link between Equipment and Sub-equipment

Hi all
My requirement is this
I have one mobile set with a serial number. for that mobile set i have one battery with a serial number, now i want to link both the serial numbers, one as main and another as sub item
I tried by maintaining the battery serial number as sub-equipment in the main mobile set equipment number master,
Let me know the table link between equipment and sub-equipment
I want a report based on the input mobile set equipment number what are all the sub-equipment associated with the main equipment
Also suggest is there any other approach,
Regards
Amuthan M

Hi
EQUZ is the table,if u give the sub equipment in equipment field and execute.you can find the main equipment in superior equipment field

Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.

Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers

Link between Charm & BC sets

Similar Messages

Maybe you are looking for