Link between Credit Memo and Dispute Case

Hi,
Please help me. How to Link between Credit Memo and Dispute Case
Thaks,
Vinod.

Linking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard

Similar Messages

Diff: Linkage of Credit memo and Dispute Case in EHP 4 and EHP5

Hi Experts
I am bit confused ...on the Linkage of Credit memo and Dispute Case in EHP 4 and EHP5.
Does the following statement is valid in EHP4 or EHP5.
"You can add a credit to a dispute to close it or reduce the amount disputed."
If it is possible in EHP 5 or EHP 4, please let me know what is the procedure to follow?
If i need to activate anything in SFW5, please provide what is the Business function i need to activate.
Thanks in Advance.
Regards,
Meenkashi.N

Linking a credit note has nothing to do with EHP4 or 5. You have to do a config sertting:
Dispute Management-Process Integration with Accounts Receivable Accounting-Assignment of Open Credits and Payments-Activate Assignment of Open Credits and Payments
And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note.
If this is the case then the credit will show up in the dispute case.
Rgds,
Richard

Re: Diff: Linkage of Credit memo and Dispute Case in EHP 4 and EHP5

Dear Richard,
I'm facing same issue in my system.
I've already made the customization in my system but still i'm facing issue.
I'm not able to get credit in my dispute case. Could you please help me out.
Also help me to understand your below statement.
"And make sure the business adapts the correct process: When you reverse a charge on a debit invoice you have to make sure the credit is properly linked to the debit note"
Best Regards,
Jain

Please note you have to perform the config - and then run the FOAP programs to attach and then match the credit to the dispute.
Please note the open item within the dispute will be cleared and a residual posted against the customer whilst clearing the credit note.

Difference between Credit memo and subsequent credit

All SAP Gurus,
In MIRO, what is the difference between Credit memo and subsequent credit?
Regards,

Difference between Credit memo and subsequent debits/credits
Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same. For eg.
PO 10 - $10
Gr 10 - $10
LIV 10 - $11 (Logistics Invoice Verification)
The vendor invoice is more than that in the Purchase Order. In order to correct, the Vendor may send in another invoice for
the Increased amount or a credit memo for the increased amount.
If you approve of the price increase, post the subsequent invoice received as a Subsequent Debit/Credit Invoice.
If it is a credit memo that has been received, then post the credit memo as Subsequent Debit/Credit.
This would retain the quantity but reduce the amount.
Subsequent Debit/Credit is for the case when the credit is not for the full amount eg. if the Vendor decided to credit
only the $1 overcharged.
Credit memo is for the credit of the full amount and value.

Technical difference between credit memo and invoice

Hi,
What is difference between transaction invoice and credit memo that are created in transaction FB60 and FB65.( is there any field that can exactly differentiate between these transaction types)
Regards
paveee.

Hi Praveen,
I think this is not related workflow question but i know the some difference fields in b/w these two.
Vendor Invoice (FB60)
Incoming Credit Memos (FB65)
Incoming Credit Memos:
As required fields:
· Transactn
· Bal.
· Vendor
· Document date
· Doc. type
· Posting date
· Reference
· Amount
· Currency
· Text
· Company code
Vendor Invoice
As required fields:
·         Transactn
·         Bal.
·         Vendor
·         Invoice date
·         Doc. type
·         Posting date
·         Reference
·         Amount
·         Currency
·         Text
·         Baseline date
·         Company Code
Thanks and Regards,
Prabhakar Dharmala

Link between credit management and pricing procedure

Hi,
I want to know the link between the pricing procedure and credit management,on basis of that system determine that credit value is exceeded at the time of sales order.
Regards
Prabudh

Hi,
In pricing procedure there is a field called Subtotal.
SUBTOTAL
A key is assigned from the drop down menu; this can be used
by the system in other area like Sis for reporting purpose
also
As Pricing comes under billing and In this there is close link with the SIS which is Sales Info System. Subtotal fieldand Net value notifies the SIS about the value and thus calculates the Credit Check.
Hope this will help.
Thanks,
Raja

Credit Memo and A/R Invoice linking

Hi
Please help me, how to find relation field between Credit Memo and A/R Invoice.
I delete invoice using credit memo with copy from function.
But when I view last credit memo, i cant find the corelation with my deleted A/R invoice number.
I found remarks, but i think remarks is not the link for document.
I really confuse about this. can anyone help me?
ps: i cant found the relation return and A/R invoice too..
Thanks so muchh

Just thought of another trick or two that you might try...
1. Open ANY Credit Memo and use the "Find" Icon (the binoculars in the Icon Line) or use "Ctrl+F" to put the credit memo window in find mode. Put an asterisk in the field where the credit memo number usually is and hit enter...
It should pop up a list of all credit memos with Remarks - look to see if your credit memo is there. Or you can sort the whole screen by double clicking on the "Due Date" column of the display.
You can view an individual credit memo by highlighting the line (making it yellow) and pressing Enter Key to check that out also...
2. If that does not work for you, you can always use the SQL route where the OINV.DocEntry = RIN1.DocEntry and get a list that way where you can look through it.
OINV = Invoice Headers and RIN1 = Credit Memo Lines
Good Luck - Zal

Diff bet credit memo and credit memo request

Hi
Can any one tell the difference between Credit Memo and Credit Memo Request
Thanks in advance

Hi,
Below is the information on crdit memo request.
Definition: A credit memo request is a sales document used in complaints processing to request credit for a customer.
Use: If the price calculated for the customer was too high (for example, with the wrong scaled prices or because a discount was forgotten), you can create a credit memo request. The credit memo request can be automatically blocked for checking. Once it has been approved, you can remove the block.The system uses the credit memo request to create a credit memo.
Structure: A credit memo request is another type of sales document like a standard order. For more information on sales documents, see Working with Sales Documents.A credit memo request starts the billing process.
=============================================
Below mentioned is the information on Credit Memo.
Definition: The term credit memo always refers to a credit memo from the vendor. Therefore, posting a credit memo always leads to a debit posting on the vendor account.
Use: As in the case of invoices, credit memos refer to purchase orders or goods receipts. They are used to correct the purchase order history if the quantity invoiced was too high, for example, if an invoice was too high or if part of the quantity was returned.
When you post a credit memo, the total quantity in the purchase order history is reduced by the credit memo quantity.
If you do not want the total quantity invoiced to be reduced, you must post the credit memo as a subsequent credit.
Hope this helps. Please let me know if you need more information and please assign points.
Rgds
Manish

Differnece between credit note and credit memo

Hi Gurus,
Can you please explain differnece between credit note and credit memo clearly .. r they same?
Regards,
Subbu

HI,
ref the link, whihc will give the complete info
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a8/b99890452b11d189430000e829fbbd/frameset.htm
and blw explanation
Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same. For eg.
PO 10 - $10
Gr 10 - $10
LIV 10 - $11 (Logistics Invoice Verification)
The vendor invoice is more than that in the Purchase Order. In order to correct, the Vendor may send in another invoice for
the Increased amount or a credit memo for the increased amount.
If you approve of the price increase, post the subsequent invoice received as a Subsequent Debit/Credit Invoice.
If it is a credit memo that has been received, then post the credit memo as Subsequent Debit/Credit.
This would retain the quantity but reduce the amount.
Subsequent Debit/Credit is for the case when the credit is not for the full amount eg. if the Vendor decided to credit
only the $1 overcharged.
Credit memo is for the credit of the full amount and value.
Credit Memo u2013 A credit memo is received from a vendor if you were overcharged on a previous invoice. It is processed as a reversal of a previous invoice on a quantity and value basis referencing a Purchase Order. In the same way the system assumes a corresponding goods receipt was posted for the original invoice, the system assumes a credit memo is linked to the reversal of a goods receipt. You must change the transaction from Invoice to Credit memo.
Subsequent Credit u2013 You receive a credit memo from a vendor decreasing the total invoiced value on a previous invoice, not the total invoiced quantity. You must change the transaction from Invoice to Subsequent credit. It is a reduction of value but not quantity by the amount of the credit memo.
Subsequent Debit u2013 You receive an additional invoice from a vendor because you were undercharged, increasing the total invoiced value, not the total invoiced quantity. You must change the transaction from Invoice to Subsequent debit. It is processed as an increase in value but not the quantity by the amount of the additional invoice.

What is the difference between credit memo in invoice year and in next year

Hi!
I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
Thanks and best regards!
Edited by: dinhtuan on Jun 28, 2010 3:10 PM

Hi,
Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor' or 'Posting a Credit Memo Offset Against a Clearing Account'
Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
I hope this helps.
Kind regards,
Brigitte

AP Credit Memo and Good return, creates differences between TB and Stock Audit Report

Hello Experts,
Did any one has ever faced an issue, whereby AP Credit Memo and Good Return creates discrepancy between journal entry and the stock audit report?
Here is the scenario:
AP Credit Memo
Description
Quantity
Unit Price
Total
Item A
                30
            3,400
   102,000
Journal Entry :
Debit
Business Partner
     105,000
        Credit
                      Stock
     105,000
Inventory Audit Report
Description
Quantity
Cost
Transaction Amount
Item A
                        30
                     3,500
                                                105,000
Journal Entry :
Debit
Business Partner
     105,000
        Credit
                      Stock
        105,000
The difference is actually due to the moving average, but the strange part is why the difference is not posted in the journal entry, in the Price different account?
This makes the stock account amount to be different from the Trial Balance and the Stock Audit Report.
And this is applied also on the Good Return transaction.
Any help is highly appreciated.
Best Regards
Cedric Kayitare

Hi Cedric,
Price & Item cost are different.
while making goods return , Direct AP Credit Note, Sales Delivery, Direct AR Invoice, stock is going outside.
In these transactions Journal entry will happen for Item cost and not Item sales or Purchase price.
Please enable item cost field in line level and check whether above formulae is matching with Item, cost field.
Then what is the importance of price in these documents??
Price is the agreed selling or purchase price for trading with Customer and supplier.
In your example
You are returning back material worth 105000(as per moving average price), but supplier is supposed to give only you 102,000.
Hope you understand
Thanks
Unnikrishnan

Link between Credit Risk Category and Terms of Payment

Hi,
Is there a link between the Credit risk category and the terms of payment. Where can we maintain this.
For instance, if risk category is x, the top is a, risk category is y, top is b.
Please suggest.

There is no link between credit risk category and Terms of Payment. The Risk Category is assigned to credit limit of the customer which determines if it will be blocked at certain level for sales transactions or just a warning message that the customer is over the limit. For the terms of payment, it just determines when it's due or whether it's overdue or not.

Link between Sales order and Credit master sheet

Hi,
Plz explain the link between sales order and credit master sheet.
Thanks and regards
CSR

Hi,
Credit master is related to Customer.
Credit limit will be assigned to a customer by using the T.Code FD32.
Credit control area will be assigned to a customer.
You can the credit control area for a customer in the table "KNVV".
Goto the T.Code "FD32".Enter your customer number and credit control area.Select the status tab.
Here you can maintain the credit limit.If you leave blank means the limit is 0.00.
Next thing is goto the T.Code "OVAK".
Select your sales order.Maintain the "Credit limit check" for your order type.
Goto the T.Code "OVA8".Select your valid combination.Here,you can activate either the static or dynamic credit limit checks.
If you create the sales order by using the customer,initially the system will check for the credit limit.If it is 0.00 and credit check functionality is activatd in the above specified T.Codes,then creditcheck will happen and order will be blocked for releasing of credit by using the T.Code "VKM3".Authorised persons have to release this credit block.Suppose,you have maintained this credit limit as "1000Rs/-" and you are creating the order of value "550Rs/-",then your order will not be blocked even though the credit check functionality is activated for your order type.
In this way,sales order is in turn related to credit master.
Regards,
Krishna.

Issue related to the Credit memo and S.O.

Hi,
I have one issue related to the Credit memo and S.O.
We have a network of Dealers and Dealer inventory is linked with our system. When user creates S.O for Dealer1.If the item is not avail in our inventory and it is avail in any other Dealer inventory (Dealer2), then the system creates S.O wrt the Dealer2.
In this case as the material is directly delivered from Dealer1 to Dealer2, there is no any GI in our system.
So, the transaction with Dealer1 will be the normal as usual. But, we have to return the goods amount to the Dealer2 with any suitable way. We are considering it as a Credit memo.
My question is, as we have created S.O wrt the partner function- Dealer1 and we are creating CR memo for Delaer2, is there any way through which we can link the se two transactions with customizing so that we need not to make any ABAP programming.
I mean can we create Cr memo wrt S.O when the partner functions are different?
Pl. guide me.
Thanks,
Roopan.

You have an interesting Scenario.
You can handle this scenario in multiple ways
1. Third party Scenario (Here Dealer 1 becomes Vendor &Dealer 2 remains Customer)
2. Order related sales & credit memo.
3. Intercompany sales, where you represent dealers place as a plant in your system. (Not an ideal way to handle the scenario, but possible option)
Regards,
Rajesh Banka
Reward points if helpful.

Credit memo and debit memo

Can some one kindly explain the img config step by step and how to check this setting in easy access.
Thankyou in advance
Rewards are assured
Best regards,
R.Srinivasan

REFER BELOW REWARD IF HELPS
Debit note and Credit note? What is the purpose? How we create?
1. A transaction that reduces Amounts Receivable from a customer is a credit memo. For eg. The customer could return damaged goods. A debit memo is a transaction that reduces Amounts Payable to a vendor because, you send damaged goods back to your vendor.
2. Credit memo request is a sales document used in complaints processing to request a credit memo for a customer. If the price calculated for the customer is too high, for example, because the wrong scale prices were used or a discount was forgotten, you can create a credit memo request. The credit memo request is blocked for further processing so that it can be checked. If the request is approved, you can remove the block. The system uses the credit memo request to create a credit memo.
You can use credit memos in Sales and Distribution (SD) for assigning credit memo requests to the open invoices and in Financial Accounting (FI) for assigning credit memos and payments to the open invoices and carry out clearing with them. If you use both Financial Accounting (FI) and Sales and Distribution (SD), there is a 1:1 relationship between the credit memo request and the credit memo item posted in Financial Accounting (FI). As soon as you bill the credit memo request together with other sales orders, or distribute the items of one credit memo request to several billing documents, the assignment is no longer valid and the system will not process it.
For credit memos, credit memo requests, and payments, you have the following assignment options:
- Assignment to a single invoice
- Assignment of a partial amount to an invoice
- Assignment to several invoices
When you post credit memos, the payment programme processes them automatically. If the credit memo is specifically related to a particular open invoice item, the payment program automatically attempts to offset the credit memo against the open item. If it is not possible to completely offset the credit memo against an invoice, you can post a debit memo to the vendor, who is to reimburse the amount. Then you can apply a multilevel dunning program.
3. Debit memo request is a sales document used in complaints processing to request a debit memo for a customer. If the prices calculated for the customer were too low, for example, calculated with the wrong scaled prices, you can create a debit memo request. The debit memo request can be blocked so that it can be checked. When it has been approved, you can remove the block. It is like a standard order. The system uses the debit memo request to create a debit memo.
4. As mentioned above, creating a credit or debit memo request enables you to create credit or debit memos based on a complaint. For this first create a sales document with the order type for a credit or debit memo request. You can create the debit or credit memo requests in the following ways:
Without reference to an order
With reference to an existing order
Here you enter which order the complaint refers to.
With reference to an invoice
Here you enter which invoice the complaint refers to.
In all cases, you specify the value or quantity that should be in the credit or debit memo
5. You can block the credit or debit memo request from being billed in Customizing. Go to Sales -> Sales Documents -> Sales document header -> Define sales document type and select the billing block field in the billing section. This request can later be reviewed along with similar ones, - if necessary, by another department. The request for a credit or debit memo can then be approved or rejected.

Link between Credit Memo and Dispute Case

Similar Messages

Maybe you are looking for