LInk Between Equipment & calss type

hi! All
is there any Link between Equipment no. and Class type of it. Bz i need to fetch the class type for a Equipment No. to fetch its class attributes details.
Thanks and Regards,
Kv

Hi Kv,
AUSP - Character values
KSML - Character of a class
KLAH - Class Header
KSSK - Object to class
CABN - Characteristics
KLAT - Class Header text
EQUI - Equipments
EQUI - Equipment time segments
EQKT - Equipment texts
try to relate these tables with OBJEK, CLINT, ATINN, EQUNR, HEQUI, IMERK
The link goes linke this,,,
EQUI-> KSSK->KLAH>CABN/KSML->AUSP.
here OBJEK = EQUNR
Hope this helps..
Thanks & regards,
Dileep .C

Similar Messages

Table Link between Equipment and Sub-equipment

Hi all
My requirement is this
I have one mobile set with a serial number. for that mobile set i have one battery with a serial number, now i want to link both the serial numbers, one as main and another as sub item
I tried by maintaining the battery serial number as sub-equipment in the main mobile set equipment number master,
Let me know the table link between equipment and sub-equipment
I want a report based on the input mobile set equipment number what are all the sub-equipment associated with the main equipment
Also suggest is there any other approach,
Regards
Amuthan M

Hi
EQUZ is the table,if u give the sub equipment in equipment field and execute.you can find the main equipment in superior equipment field

Link Between Sales Order Type and Customer/Material Exclusion

Hi,
Any one know the Link Between Sales Order Type and Customer/Material exclusion tables (Transaction: VB03 ) ?

Hello,
For Tcode VB03 you can check KOTG001 for Customer/Material.
Thanks &Regards,
Abhijit

Establish the link between equipment and its standby equipmnent

Dear experts
How to establish the link between equipment and its standby equipmnent in SAP?
For example, I have one pump in a plant and also i have a standby pump installed next to it...now i would like to establish a relation between these two inorder to track them.
I tried linking them as subequipments, but logically that is not sub equipment.
what is the best way to do it?
Regards

Praveen,
Equipment & Standby equipments are installed on same Function location.
There are below workarounds for solutions.
1. Use Position Number
2. Use A,B,C indicator with Running & Standby status
2. Use link if it is applicable.
3. Use classification system & provide characteristic as Running / Standby
Further u can assign the System condom which is equivalent to equipment running or stop condition during transactional data creation like order..
If it is running it indicates it is working.
If it is in stop condition then at that time it is in standby mode.
Thanks,
Ramesh

Need link between Equipment- class- characteristics- values...

Hi Guys,
As per the customers requirement I have to list down all the equipments along with the respective corresponding values. The equipments are linked to the Characteristics by class type and class and then characteristics and then the the values that are assigned.
I am aware that the characteristics and the values are saved in the CABN and CAWN table and the link between them us the internal number.
Can any one please suggest me if there is a way to find a table link for equipment which are assignd to a Class type and hence a class and then these characteristics in CABN and values in CAWN.
Thanks in advance.
Anoop

Plesae post your question in the appropriate forum -- this is for Asset Accounting.

Link between equipment and items in stock

Hi Expert
I work on maintenance, and I would like to create a link between the equipment and items in stock PDR
what is possible without going through the nomenclature article
Thanks

yahya el hammami,
Investigate maintenance [Bills of Materials|http://help.sap.com/erp2005_ehp_04/helpdata/EN/c4/e51386a2f211d19dae0000e8323350/frameset.htm] (BOMs)
PeteA

Link between Equipment

Hi All,
I have a scenario like this one logical equipment is connected to different equipments which are in different functional locations.
If I want to do the maintenance on logical equipment I need to know which equipments are connected to this equipment.
Please suggest me how to do it in SAP
Thanks in Advance
SSK

SSK,
To be frank I did not implement Object networking as I have not come across requirement. But I tried this in IDES for a Demo purpose for just half a day.
I guess your requirement can be easily met Object networking...
Please investigate this [Object networking |http://help.sap.com/saphelp_47x200/helpdata/en/b0/df293581dc1f79e10000009b38f889/frameset.htm] and try.
Let's wait for reponses from our peers ...
Would be great if you post the steps / Pros and Cons in this... May help others...
Babu

Link between output type and the email id in me22n ?

Hi,
Can anyone plz explain the link between the output type and the email id maintained in the address data in ME22n ?
The output type is configured fo rsending Email .Whenever i maintain the email id in the address data the outptu type gets triggered automatically but if I leave it as plank the output type does not get triggered.
Can any one explain this dependency?
thanks in advance
regards,
Ashwin

Hi,
It depends on the output record that you have used, what is the key?
It is no different that printed POs where the Printer Id is not specified in the communications tab of the output record. If the systen can't find where to send the output to it will not generate the record.
If it did generate the record without the email address, what would you expect to happen? Where could it send it?
It is far better to get the warning message "unable to determine ......" that to simply save the PO without the email addrerss.
So I would simply see the warning message as an indication that the email address is missing and fill it in before saving.
Steve B

Link between Basic Salary Wagetype and Bank Transfer Wagetype?

Hi Experts
In my SAP System BASIC, HRA,C.A and E A wage types are assigned only for Expensive A/c's not for Balance sheet account but when am simulating the total figure was going to bank transfer balance sheet account.it is correct.but Where we can find the the link between HRA Wage type and Bank Transfer wage type Account?
thanks
venu

All the wagetypes Basic,hra etc are expenses to the company and salary payable is liability to the company ......So your Bank Transfer WT total consists of all the Wts ....so Basic,hra etc WTs goes to the Expenses a/c and Bank Transfer goes to the Balance sheet a/c . Balance sheet tallied with all expences equal to liabilities .
Mohan

Is there any link between movement types and documents

hi
is there any link between sales doc and movement types ?
is it the only source dependig on schedule line movement type will determined?
if with out order we are doing delivery how system will determine movement type
Thanks in advance

Hi,
Deliveries that are created without reference to order , contained movement type because to process a delivery you need to have some of the control criteria that are copied from sales document header to delivery document header, as system processes delivery in that way ,that is why you will find default order type is assigned to the delivery document type ie DL. .which helps the delivery document to process without reference to sales document.
In Addition to above information,
In VOV4,
DL+ NORM + + -DLN
In VOV5,
For Itemcatagory DLN+ --CN
From this schedule line category CN,movement type 601 is taken during without reference to order delivery creation.
MCM

We57 link between logmessage and idoc type does not exist

in we57
i have fm idoc_input_pordcr
basic type pordcr101
message type pordcr
when i try to save
gives message link between log message pordcr and idoc type does not exist.
will not let me save
where do i go to link these up

Hi,
Transaction WE82, assign Idoc type to message type.
Regards
Vijaya

Link between code and code groups and inspection type

Hi All,
I want to know the link between code and Code Group for UD and inspection type?
There is an option of choosing Usage selected set in SPRO "Seeting for inspection type".If i dont enter anything there,will it show all the code groups in the system while taking UD?
Pls guide

Hi Shreya,
Yes, the link between code and Code Group for UD and inspection type is specific selection of UD related to specific inspection type. Ex. there are separate UD codes individually for Goods receipt against PO, Gr against Production or for In-process inspection ets. so If you assign the selected sets at SPRO Inspection type, then while doing UD system will show UD codes related to only that inspection type.
If you don't enter anything there at SPRO, you will see all the code groups in the system while taking UD and one can get confused in selecting the relevant code.
so assigning of UD selected sets, plant wise (tick) at " Inspection types" is best practice.
Best Regards,
Shekhar

Link between output type to Idoc type

Hi Gurus,
One basic question....How do we link sales document output type(eg BA00) to Idoc type/Message type.
I know from WE20 we do the partner profile setup and link the message type to idoc type and then we do the output determination,so now how does the system know for a particular output a specific idoc type has to trigger,is the link established when configuring thru we20 or is there any direct link to output type to Idoc type. I also checked WE82 but that dint help me either.
Thanks,
Vivek

Hi friend,
apart from the configuration of output type to idoc... etc.. the thing which triggers idoc is the message control along with partner profile.
the explanation can be more lengthy - but I just wanted to mention about message control.
Regards
sadhu kishore

How link between the two tables

Hi All
In fact, I am new in Oracle and also, in this forum, and I hope that I find useful and benefited also reportedly.
My oracle is Oracle Database 10g Express Edition.
I have now two tables and one for staff and the second of the equipment used by staff.
Well now how link between tables in the agenda third.
Thanks

You could read one of the many books on the subject, or you could just try something real simple like
SQL> desc a
Name                    Null?    Type
USERNAME                NOT NULL VARCHAR2(30)
PROFILE                 NOT NULL VARCHAR2(30)
SQL> desc b
Name                    Null?    Type
USERNAME                         VARCHAR2(30)
ROLENAME                NOT NULL VARCHAR2(30)
SQL> select * from a natural join b;
USERNAME         PROFILE      ROLENAME
USER_ONE         DEFAULT      CRISYS_SYSADMIN
USER_TWO         END_USER     USER_CONNECT
USER_TWO         END_USER     CARS_APP_USER
USER_THREE       BATCH_USER   BATCH_CONNECT
USER_THREE       BATCH_USER   APPLICATION_OWNER
etc.

Is there a DIRECT link between SD schedule lines and delivery lines?

Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)?
Is there a function module to retrieve the data?
Example-
One order line with 3 schedule lines.
Each schedule line is for 2 units (total of 6 units).
Three deliveries made. 1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line. The schedule line already references the order line.
I am using math to decrement the schedule lines used and make the link between VBEP and LIPS. It works fine. I need four records back....
1st schedule line for 2 units uses delivery 123
2nd schedule line for 1 unit (partial) uses delivery 124
2nd schedule line for 1 unit (partial) uses delivery 125
3rd schedule line for 2 units uses delivery 125
Like I said, it works. Just wondering if I missed a more direct link.

As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks

LInk Between Equipment & calss type

Similar Messages

Maybe you are looking for