Link between HCM Processes Forms with portal

Hello Friend's,
Can anyone tell me how to link HCM processes application with portal. I created process in backend. tell me how to call that process in my portal.

Hi Ramesh,
i am not sure you got the process in Portal or not, but this steps helps you to get process in portal.
Go to SPRO --> Personal Management - HR Administrative Services - Configuration Process for HCm Processes and Forms - Process Configuration -- Setup Processes -- Validity for Processes -- Select Specify Valid Processes for start Application -- now it will prompt with Role of Initiator slect Manager/Employee/HR admin specfic start and end date
and still we have one more step to do...
hope it helps pls let me know if you face any problems in setting up HCM forms and processes i will try to help you out.
Regards
Vijai

Similar Messages

HCM Process & Forms with FPM forms

Hi,
Is it possible to hide the previous comment & new comment fields in FPM webdynpro used in HCM forms based on conditions e.g 'if they are empty' or based on scenario stage... etc.
Kindly help.
Thanks,
Anju

You are welcome Uvendu.
There are some notes related to pdf generation. Recheck if they are relevant and in place.
PA-AS
1901520
PDF generated multiple times
20.08.2013
5.
0.350
PA-AS
1968166
Errors during PDF generation for FPM forms
21.01.2014
6.
0.260
PA-PAO
1992122
Attachment Handling and Form Utilities missing when starting HCMPF Processes in
09.05.2014

Error while editing standard HCM Processes & Forms

Hi experts,
I would Iike to test the standard HCM processes & Forms & for which I have imported the standard forms from Client 000. I have also configured the ADS & have tested the credentials as well. Everything is fine & new custom ADOBE interactive forms (Not HCM Forms) are working fine through WDA. When I test any of the standard processes using HR Administrator role in Portal, I am able to select the relevant standard process (e.g. TERMINATION) for a given employee, but when I click on the Edi Process button, the system generates an error (short dump): "'WebDynpro Exception: ADS call failed ". I have checked OSS, but did not find any suitable note for it. I have the HR administrator role assigned in the back end & have confirmed that the ADS configuration as well as credential are working fine using the recommended reports. We are on EhP4 SP06.
Appreciate if anyone has already experienced these probelms & can suggest any solutions. Thanks in advance.
Best regards,
Sameer

Sameer,
To me it appears that ADS is conencted to only backend ECC not to the portal system.
Please try below:
1. Launch WDA for HCMPF in SE80 with appropriate parameters and see if this displays interactive adobe form when you click in edit button.
2. May be test the ADS connectivity to portal system.
regards
Sridhar Kandisetty

HCM Processes & Forms PD Backend Service

HCM Processes & Forms
SAP_PD service (OM New Position Object IT1000, New Org. Unit Object(IT1000) and Relations between Position & Org. Unit(IT1001-A003 and/or A012 )
--- OM Data Create Position Object and Create relation with already existing org. unit, process form shows u201CProcess Completedu201D. When I check transaction log t-code : slg1 " The number indicated is not in any valid external interval" and " S 30117940 not found"
This same case is working fine, if I removed the internal number range (just try), it is creating using SAP standard number range '5XXXXXXXX' , it has been created object 'S' and relation with 'S' - 'O'.
I have created the process form with the following cases with internal number range is working fine.
1) Create Position using SAP_PD standard OM service u2013only object
2) Create Org. Unit using SAP_PD Service -- only Object
3) Using exisiting Org. Unit and Exisiting Position create relation -- only relation.
I am working a requirement same as Process: HR_PD_CREATE_POSITION but no hope.
If anyone knows about the new object with relation, why internal number is not working or any configuration may I missed!!!
Thanks & Regards
SAMY
Edited by: Ranganathan Pazhanisamy on Feb 1, 2011 8:35 AM

Dear Sameer,
The note 1098009 - Limitations for Web Dynpro ABAP doesn't say anything that you can't do.
I made a brief analysis and didn't see any issue (regarding the note). Check it out in a more detailed manner to see if there isn't a limitation.
I hope this has been useful.
Kind Regards,
Maurício.

Unable to test a FPM form based process in HCM Process & Forms ?

Hi Experts,
Am new to HCM Process & Forms, I created my first form on FPM and am trying to test it but am not able to do so.. can you all please help me figure out where I am going wrong.
Here is what I am doing ...
I have a build a FPM Form Scenario and Process. Now when I clicking on the Execute button in HRASR_DT and go the test screen I dont get the option for selecting the Web Dynpro Screen as Application Start Option.
I also tried testing it through
http://OURSERVER/sap/bc/webdynpro/sap/asr_process_execute_fpm?sap-language=EN&sap-wd-configId=ASR_EXECUTE_5_STEP_PA
and
http://OURSERVER/sap/bc/webdynpro/sap/asr_process_execute
when I do this then I am getting an error message "No Internal Service Request scenario was specified".
Please Advice.
Thanks

Hi Sahir,
Yes, I had to Activate the business function HCM_ASR_CI_5 to get the "Option for Application Start" section in HRASR_DT.
Thanks for the launchpad configuration link.
The one think that I am still having issues is that if I goto se80 and selected the WD Application ASR_PROCESS_EXECUTE_OVP and using the Application configuration ASR_PROCESS_EXECUTE_OVP_CFG I execute it by clicking on Test....I get an error message saying
"Process does not exist"
Does this mean I can't test my process through se80 I will always have to go through portal and configure the launchpad to test my process ?
Or am I missing some config or doing something wrong ?
Regards
Chayan

HCM Processes & Forms - Infotype 0008

Hello,
I am working on a scenario where a salary change is being done through HCM Processes & Forms. The salary that changes is in a wagetype (0001). There are other wage types that are also in infotype 8. How can I make sure that I can add more than 1 wage type in this scenario? Right now, if I only add one wagetype, it doesn't copy the wage types that are in the previous record (which is what I thought it would do).
So, as an example:
On date - 1 we have : 0001 - 4,000, 0100 - Indexed to full time salary, 0200 - indexed 12.50 %
On date we have: 0001 - 4,200
We want to have: 0001 - 4,200, 0100 and 0200 - 12.50%
TIA
Jaron Frenk

Hi Chris,
We have a similar requirement to update infotype 0041 records.
I think you simply use the same field to pass to your service to different fields but you change the index for each time you use it. You can see this in the sample processes SAP provides.
Could you explain a bit on the above ' index' ? What index are you referring to?
Also, if possible could you reply with the sample processes in SAP which you were referring to?
Thanks in advance,
Deepa

HCM Processes & Forms Cost Assignments Defaults

Hello Everyone,
I have a question about making Cost Assignments for Infotyps like "Additional Payment" (0015) or "Employee Remuneration Info" (2010) within a Processes and Forms Scenario. This is really a huge requirement for us because the hole Company is split in several subsidiaries so we need to book the costs to different cost objects.
In the Backend World (PA30/PA61) when creating a record for either one of the Infotypes I can choose the Option "Maintain cost assignment" so I can define a different cost object where the costs of the created record should be booked.
I know the data of the cost assignment get's stored in the tables ASSHR & ASSOB. But as I'm using the SAP Backend Services SAP_PA and SAP_PT I can't make any DB update/insert statments after the records are created.
Did anyone implemented a Scenario like this before?
Would be awesome if someone could give me an advise.
Best regards,
Tobias

If the infotypes in question are standard PD infotypes you could use SAP_PD service to update them.
For any other tables you will have to go with a advanced generic service or do the update in a background workflow task.
Refer here to the post by Christopher Solomon's Profile | SCN: http://scn.sap.com/community/erp/hcm/blog/2012/08/20/hcm-processes-forms-when-all-else-failsadvanced-generic-services
Hope this helps.
Regards.

HCM & Process forms

Hi Experts,
I am new to HCM & Process forms could you please provide the information about HCM & Process forms, and how they are useful.
In which requirements we have to use these HCM & Process forms.(Send me some important links regarding the HCM & Process forms).
Thank you,
B. Raghu Prasad.
Moderator Message: Please search before posting.
Edited by: Suhas Saha on Oct 5, 2011 3:52 PM

Hi Aakash,
Yes, in my case it was an authorization issue. Try assigning the role SAP_ASR_MANAGER to the manager in the ECC.
Regards,
Manish

HCM processes & form- a line is displayed in portal instead of Adobe forms

Dear FRIENDS,
In HCM PROCESSES And FORMS , when we run a process, adobe form is not displayed. In place of that a single line is displayed.
When I implemented the SAP note 1334453 it gave dump in portal saying ASSERTION CONDITION WAS VIOLATED.
Then I reset the SAP note. Still facing the same problem.
Please help ASAP.
Thanks in advance
Rahul Zalte

Dear Chris,
We are really stuck in middle of the project. Please provide your expert inputs in resolving the issue.
When we execute 3rd step, a straight blank line comes. When we press Previous button, a popup window appears giving message ' Data will be lost', It suggets that form is there but it is hided.
Thanks and Regards,
Rahul Zalte

HCM Processes & Forms : Migrating from JSPs to Web Dynpro for ABAP

We are pretty well invested in HCM Processes and Forms. We currently use JSP based forms as the UI for our notifications. We do not, use Adobe Forms.
For a number of reasons, we want to transition to forms based in Web Dynpro for ABAP.
We want to bring a new scenario online using WD4A. Down the road, weu2019ll very likely transition our old JSPs over to the new methodology as well.
I would expect that this is pretty well doable. As part of a proof of concept, we did launch notifications from the web dynpro environment, had them initiate workflow, etc . Weu2019ve also pulled up our web dynpro app from the UWL and portal.
Has anyone gone through this specific exercise u2013 moving from JSPs to WD4A? We are particularly interested in where the integration points will be, working with ISR_PROCESS_EVENT, etc.
Your comments, suggestions, references, etc. are welcomed, as well as any discussion you may offer.
Thanksu2026
...Mike

And along the same lines, any thoughts around which of the following QISRDPROCESS_TYPEs might be a better choice?
Entry Using ITS Service
Entry Using Adobe PDF
We currently use the ITS Service type. I think this may be our first direction, replacing url links with links to our webdynpro application which woulds need to integrate calls through ISR_PROCESS_EVENT
The Adobe Type seems interesting - Again, we do not, nor will, have Adobe Forms in place for this development. But, I've read some discussion that folks have enhanced out of actual Adobe Form rendering.
Again, the thoughts of the community are welcomed here.
Thanks...
...Mike

HCM Processes & Forms without Employee Selection

We would like to develop a Job Requisition Process using HCMPF. A Job Requisition does not require an employee selection. The Start Process in the portal begins with the selection of an employee. I know that the ability to skip employee selection in the Start Process is delivered with EHP4 but we are going to be doing this development with EHP3. I read in an SDN blog that via configuration you can set a process to "skip selection". In this way, the process actually jumps right to the form screen as if it was in an "edit" task. Would this be a solution for us? Is the configuration done somewhere in the process definition in the ECC System? Does the process still require an employee selection at the end of the process to complete it? We have heard that an HCM process does not have to do updates, but can just be a fill-in of a form and routing for approvals. I need help understanding how to initiate this type of process when no employee selection is needed.

Hi Joyce,
Did you manage to resolve this? We have a similar requirement and are on EnP 3 as well. Is this something that you were able to achieve?
Thanks.
Regards,
Akshay

HCM Processes & Forms : Generate PDF

Hello All,
We are developing , an application based on HCM Process and Forms - with ( FPM forms ).
One of the requirements in the application is to get the form in - PDF format and to achieve this we have followed the steps below.
- Created the configuartion steps as mentioned in SAP Help Link - Print Form ( FPM Form Type Only ).
- Created a PDF form layout and provided in the other attribute of Form Scenario - Print Form ( FPM Form type Only) - Activated the same
- The form interface is also mapped and active
With the above configuration done , while executing the form we can get the - 'Generate PDF' button enabled in form utilities , but the button does not respond.The 'Generate PDF' button does not work.
We could achive to get the PDF OUTPUT programatically using 'cl_hrasr00_pdf_generation=>generate_pdf' , but the same is not appearing when the button 'Generate PDF' is clicked.
Request you inputs , on how to get the 'Generate PDF' button working , is there any additional configuration required? Or are we missing any thing in this?
Awaiting you response.
Thanks and Regards,
Uvendu

You are welcome Uvendu.
There are some notes related to pdf generation. Recheck if they are relevant and in place.
PA-AS
1901520
PDF generated multiple times
20.08.2013
5.
0.350
PA-AS
1968166
Errors during PDF generation for FPM forms
21.01.2014
6.
0.260
PA-PAO
1992122
Attachment Handling and Form Utilities missing when starting HCMPF Processes in
09.05.2014

HCM Processes & Forms - Some questions about the PD Processes

Hi Experts,
At my Organisation we use HCM Processes and Forms and Organisation Management and MSS to manage Position Based Security (PBS).
The MSS Managers have requested a form be developed which they can use to extend an existing Position to Employee temporary assignment (IT1001 S-P with A081 relationship) which is due to expire within the next 30 days. We recently upgraded to ECC EHP6 and I thought I would now have a go at developing this Form.
While researching in SCN and SAP Press books on the ‘HCM Processes and Forms’ topic, I have discovered a lot of information that has assisted me so far in progressing this solution.
There are a few givens that I have confirmed so far, which are as follows;
Since we are using Positions (Organisation Management), the only option available here is to use the PD Process, which implies using the SAP_PD Back_End Service. Therefore this become the baseline to build upon.
While researching in SCN and SAP Press books on this subject I could not find relevant information about what is possible using the SAP_PD Service to achieve my solution design for the above requirements and thus my post to the HCM P&F Community for assistance.
My questions are as follows;
In the solution design, I was considering to use the “Process without Start Object” or “Mass Start” to skip Step 1 - “Selection Object” and use a Generic Service to get all the positions for the Manager (along the lines of the SAP Standard Generic Service - find Positions in Manager’s area of Responsibility) and only retain the Positions where the End Date for the IT1001 A081 relationship in between the Effective Date and Effective Date plus 30 days. This should provide me with all the positions under the Manager that have the A081 relationship with the assigned employee that are about to expire within the next 30 days.
I want the result presented on the Form in a Table format so that the Manager has to enter the Extension Start Date and End Date for the new assignment period.
Is this possible using Standard Design Time functionality?
2.      Or Instead of Question 1, could I use OADP to achieve the same result using a custom search class to return a list of multiple objects (Positions)which is used to populate the form?
3.       I get the impression that the ‘Mass Start’ process is mainly for multiple employees. Can it also be used for multiple PD objects?
4.       I get the impression that if I used the ‘Mass Start’ option I could only use this if I was CREATING a new object or assignment? (I take it that you cannot use the Mass Start option to CHANGE multiple existing objects. Only because I have not seen any SAP Standard examples of this yet!)   Please confirm if this is possible?
5.       Has anyone used the “Query for Mass Start” option on a Process? How does that work? (Could I write a ‘SAP Query’ to get the positions I am interested in under the Manager?) Is there a sample SAP Standard process that uses a query?
Your assistance would be greatly appreciated.
Thanks in Advance.
Regards,
Steve

no limit
no limit
limitations of what?
you can use forms on mac, pc, and other systems

HCM Processes & Forms in EccEhp7/EP7.4

Hi all,
We are on SAP ECC EHP7, and SAP EP 7.4.
On EP, we installed business packages: ESS WDABAP and MSS Add-on 1.0. The ESS/MSS are based on new WDA content, so there was no need to create JCO connections.
We are started developing and using HCM processes and forms, using adobe interactive forms.
to test the HCM P&F, is it the only way that testing can be done using SAP EP only?
I checked in EP, but the role HR Administrator is not available. do we need to install a special content into EP.
although we are in ecc ehp7/ep7.4, is HR Administrator role is based on Webdynporo Java iview or WDA iview, is it mandatory to use jCos,
For AIF based P&F, is it mandatory that approver accesses UWL in portal only.
instead of AIF, if we start using FPM based P&F, how can we test directly without Portal.
actually, we are just in development phase, we are the checking the options of handy way of testing end to end, the AIF based and FPM based P&F.
thanks in advance.
Madhu_1980

Since you are on the latest EhP it is better to go with the newly delivered start process application which documented @ Assignment of a Process to PFCG Roles - HCM Processes and Forms - SAP Library as mentioned by Deepak. The advantage being this application is capable of launching both AIF and FPM based forms and is based on WDA which SAP's preferred UI development technology for Business suite applications.
Most of the testing can be done directly using HRASR_TEST_PROCESS in DEV.
If the customer is ok with using NWBC in place of portal there is no need to use UWL. But NWBC HR Admin role uses POWL based workflow inbox in place portal UWL. However workflow scenarios should be tested from the portal UWL/POWL inbox - so as to ensure the complete process flow works seamlessly.
As long as you use WDA based applications I think JCos will not be needed.
Moreover with the note 1685257 - Upload of SAP delivered NWBC Roles to SAP Netweaver Portal you can port NWBC PFCG SAP_ASR_HRADMIN_SR_HCM_CI_4 role to portal role.
Hope this helps.

HCM Process running from Portal

Hi,
We implement HCM process Transfer scenario.
we are able to view the adobe form from portal, initated by HR. But while clicking Check and send, the process is in continuous loop.
The same process successfully we are able to test from SAP R3.
While executing from portal we end up with an continuous process loop and no error messages thrown.
All help is greatly appreciated.
Thanks

Hi,
Which version are you on?
ISR_FORM_SPTR might be active in transaction SFP, but is not available for use in ERP2004. For further clarification, please check note number 863308.
Regards,
Aditi

Link between HCM Processes Forms with portal

Similar Messages

Maybe you are looking for