Link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH)

Hi!
Is it possible to find some link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH) without using batches, serial numbers and UDFs?
Any ideas?
Thanx!
Regards,
David

Hi David,
I only known of 1 link possibility.
If you created the purchase order from the sales order (and the invoices are based on the orders) you can find the purchase invoice through the Purchase order, Sales Order, Sales Invoice.
Regards
Ad

Similar Messages

Table containing link between SAP REFX Business Partner and Customer

Hi,
I am stuck up at a requirement wherein i need the name of the table in which i can pass REFX Business Partner number and get the corresponding Customer Code in the output.
Can anyone help me in this regard.
Thanks in advance
Pankaj Wadhwa

Hi Pankaj,
release 470: table BD001 contains link between partner and customer
SAP ERP: table CVI_CUST_LINK contains link between internal partner guid(!) and customer
Partner guid is field in table BUT000.
Hope that helps.
Regards, Franz

Link between documentation for chars value and chars

Hi,
we need to find out sap transaction or report for link between documentation of chars value and chars.
we know for specific chars through CT04 and going to VALUES sub-tab then selecting perticular chars value and clicking on the documentation for value.

Go to transaction CT10 and select display option 'Allowed values'. You will have the characteristics along with their values.

Link between SAP R/3 KPRO and SAP Portal

I'm looking for a link between the archive <b>KPRO</b> of SAP R/3 and the content of <b>SAP portal</b>. In particular I'm interested in a link for the documents loaded in the KPRO archive in SAP R/3 and the SAP portal.
Theank you for the interest.

Hello Luca,
here are some informations about KM Connector for DMS:
Software:
Service.sap.com/patches
-> Entry by application group
-> BP for DMS Connector KM 1.0
Or Software and Documentation:
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
     Browse Content Portfolio
     Choose: Every User Content & Document Mgmt
     Choose: BP for DMS Connector for KM
     Choose button: Documentation (on the upper right corner)
Regards
Thomas

Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE. Only if I alter the Video track does it then take the changes reflected. Any suggestions as to what is causing this?
Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
Neil

Is there a link between ASCP released planned order and purchase requisition?

Hi,
i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
thanks

Hi,
As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
Hope that helps.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Link between "Log of posting run" and GL document

Dear all my friends,
is there any table where "Log of posting run" stored ?
if yes, can we link between "Log of posting run" Ref document and GL document ?
i mean, link line item of "Log of posting run" Ref document with line item of GL document (Depreciation document, doctype = AF)
many thanks !
Edited by: Quoc Luc Nguyen on Oct 29, 2008 3:43 AM

Hi.
the link is as always the reference key information (AWKEY). This is partially described in note 890976:
The created accounting documents can also be found by means of Transaction FB03. To do this, you must call the "Document List" function on the initial screen of the document display. The Company Code and Fiscal Year fields should then be entered individually. You can also enter 'AMDP' as a Reference Transaction. To find all general ledger documents for a certain reference document number, enter the following selection criterion in the "Reference Key" field:
Reference key = Reference document number + company code + fiscal year
As the company code and fiscal year, you must enter the parameters with which the depreciation posting run was executed.
Example:
- Reference document number from the depreciation posting run 0000001291
- Company code 1000
- Fiscal year 2005
=> Reference key = 000000129110002005
Technically the reference document number is stored in table ANLP. The G/L document (header) is stored in table BKPF.
Regards,
Markus

Link between implementation project configuration (SOLAR02) and ChaRM?

Dears;
We want to benefit from listing all IMG Objects and developments in an implementation project (SOLAR02) to control our transports as we have ChaRM activated on the affected systems.
But there seems to be no link/control which has several consequences:
*Status of "changes" in ChaRM and related developments in the implementation project have to be tracked seperately
*There is no link between the development in the project (SOLAR02) and the created TR.
*There is no limitation/control in the content of the TR if it concerns items not listed in your project => how to check if the project is up-to-date?
Are my assumptions correct? Or am I forgetting something?
What is the experience in maintaining changes (transports) for implementation project? On what level? Linked with the structure in Solar02 or completely independant?
I have done quite some reading around the topics but documentation around project management via SolMan and ChaRM via SolMan seems never to be really connected? (only the overall status of the project and the activation of charm via SOLAR_PROJECT_ADMIN)

>
Jett Jiang wrote:
> 1. Active Change Request Management. the inter-connect is in SOLAR_PROJECT_ADMIN.
> 2. Use normal correction to control the TRs and updates the documents at the same time.
Thank you for the reply. Concerning these points:
1) This is done... No questions there
2) The "and" in your sentence means that I myself have to do both things? So there is no link?
So this does mean that (what my understanding was) I have to create a normal change via ChaRM but under the project for example a certain business scenario. That developers work on all topics related and should "remember" that if they put something under that transport they should verify if this is documented in the SOLAR02?
If then the change is put to testing they should manually update the status of everything related to this transport in the SOLAR02...

Link Between Change Master Table (AENR) and ChangeDocTable (CDHDR/CDPOS)

Dears,
I am using change documents to get the detailed list of changes applied to
BOM.
This works fine, but I need to know additionnaly whether a given change has
been done using Change Master ( can display change master in cc02), in reference with a change number.
This seems feasible, however I don't find any obvious link between AENR
table and change documents, does anybody have clues about it?

Hi Ji,
I am also having similar issue, if u have found the solution please reply. it will be very kind and appriciated.
Requirement:(Business need)
It has to be ensured that requested changes to a material, BOM or document carried out in the right order. Therefore, an automaticcheck for open change requests for a specific object record is required.
Desired Functionality:
- the user wants to maintain a material, bill of material or a document.
- on the initial screen of the respective transaction (eg: MM02, CS02). She enters a change request number.
- the system change whether the object record that the user wants to maintain is already assigned to other change request numbers.
- if this is the case, the system displays a warning, stating that there are other open change requests for this master data record.
- in addition, the system lists the relevant change request numbers.
- the user can continue the maintenance or leave the transaction and first check the mentioned change requests.
Thanks in advance
sham.

Link between Support Desk Ticket no and Ext. Reference No.

Hi all,
Please guide me on how do I link between the Ticket no or the Transaction no of Support Desk no. with the External Reference No.
thanks & regards,
shaurabh

Hi Freek,
I just had to do this and found the answer... the table SCL4 when linked to OSCL (service calls) creates the correct link to output a listing of documents related to a service call by service call.
SELECT T0.[DocAbs] FROM [dbo].[SCL4] T0 INNER JOIN OSCL T1 ON T0.[SrcvCallID] = T1.[callID] WHERE T1.[internalSN] = [%1]
In the above case I needed to find all documents related to a specific SERIAL NUMBER but you can filter by service call ID as follows:
SELECT T0.[DocAbs] FROM SCL4 T0 WHERE T0.[SrcvCallID] = [%1]
I just selected the document numbers, but you can do a lot more with this table.
I got to thinking... if SAP does it on the service call then why do we need some workaround to achieve the same results...
Hopefully this helps!
Mike Taylor

Link between the mode of transport and storage location in IS-OIL Dn Stream

Hi
I am working on IS-OIL Downstream, and while testing the scenario of Purchasing from the other plant (through Purchasing Contract) through Data Collation I am facing a typical problem, and I hope I will get the solution on this.
I am doing the SR Report first and executing the same. After this I run the HR Report and I am putting the difference qty in EUB Item type. When I am verifying this the system is adjusting the qty and proposing the storage location, as per the mode of transport. Means if I maintain the mode of transport in Purchase Contract, for ex if it is 02 -- Train, the storage location will be train. But, I would like to know where is the link between the Storage Location and Mode of Transport, so that I can tell the system to pick up the particular storage location (currently it is picking up wrong storage location).
I will be grateful if any one helps me...
Thanks and Regards,
PKM

Hi pkm,
if you are working with the OGSD component Data Collation then there is no direct relation to the transport mode. The Data collation is only supporting a vehicle.
Best regards,
Fouad

Link between Cost element GL Account and WBS element.

Hi,
I want to get the List of all dollars sitting on the GL account attached to the selected WBS element.
For this, Any one please suggest me the table where i can get the link between the WBS element and GL account.
or
Table for link between the Cost element and GL account
and Table for link between the Cost element and WBS element.
Thanks,
Suresh.

Hi,
1. There is no link between cost element and WBS
2. Link between cost element and G/L account is one-to-one. This means, that if it's a primary cost element it has the same code as the G/L account. If it's a secondary element, no link exists.
3. The table where you can see the postings on your WBS is COEP. There you will find the cost element, WBS, amounts, etc.
Regards,
Eli

Convert data link between one query's group and another querys group to SQL

Hi
I have a report where there are 2 query Groups. These 2 query groups r linked by data link. How do i combine these queries to One query so i can use it as a SQL query.
Thanks

Hi,
Assume that we have two queries Q1 and Q2 and the common column between the two queries is "comn".
Now we can convert the datalink into SQL as follows:-
SELECT *
FROM
(Query for Q1)a,
(Query for Q2)b
WHERE a.comn=b.comn(+)
Note: "a" and "b" are alias names for Q1 and Q2.

How to ensure the link between iTunes Library itl file and Music Folder residing on a different drive?

I'm planning to move my Music Library from a PC to Mac. Both running iTunes 10.
On the PC (Win XP) the iTues folder did not move from My Music folder when music (and videos, books, etc) were moved to a different drive on the PC. iTunes runs ok, but the itl, xml and itdb files remain in the My Music Folder.
When I transfer the music (folder and all other contents) to the Mac, and then the itl, xml, itdb files into the new Music>iTunes folder will they still be "linked" or will I need to rebuild the itl from scratch?
Is there a way to ensure that the itl and music files themselves transfer to the Mac and remain linked once iTunes is launched?
thanks

Making a split library portable
Here are typical layouts for the iTunes folders:
If the iTunes folder contains the iTunes Media folder as above then the iTunes folder can be moved to a new location/drive/computer without breaking the file references. Although it is possible to migrate a split library from one system to another, the media folder must end up at precisely the same drive letter & path on the target system. This is feasible when moving between Windows systems, possibly feasible moving between Macs, but definitely impossible when moving PC to Mac or vice versa.
Assume the media folder on the external drive is called ..\<Parent>\<Media> and the library files are in the usual place of <Profile's Music>\iTunes.
You need to copy the library files and Album Artwork folder into the <Parent> folder, then use the hold-down-shift-when-starting-iTunes method (hold down option for Macs) to open the copy of the database that you've made in the <Parent> folder.
Once this library has been opened and tested there are a few changes you can make so that it conforms to the standard layout. When iTunes opens it uses the folder name where the database is located as the window name so if the <Parent> folder isn't called iTunes then neither will be the main iTunes window. Close iTunes, rename <Parent> as iTunes and use the hold-down-shift-when-starting-iTunes method to open iTunes again. If <Parent> is the root of the drive, make a new folder called iTunes and move the library files, Album Artwork & <Media> folders into the new iTunes folder instead. Start iTunes, then check under Edit > Preferences > Advanced that the media folder location has been correctly updated and edit if necessary.
You may also want to correct the media folder name. Having applied the fix above, if it was necessary, close iTunes then rename the <Media> folder as iTunes Media. Start iTunes and again check under Edit > Preferences > Advanced that the media folder location has been correctly updated and edit if necessary.
Congratulations, your library is now fully portable and you can connect your external drive to any computer running the same build of iTunes, Mac or PC, in order to work with it. Don't forget to deauthorise the old computer if you won't need to access protected content on it again.
tt2

Erroneous link between R/3 Schedule Lines and CRM Schedule Line

Hi everybody,
I am analyzing the best approach to fix a duplicate schedule line issue in CRM. The documents are modified from R/3 by means of an IDOC (ORDERS05).
First of all, let me explain the process.
1.- Document is first created in CRM
2.- Document is updated from CRM in R/3 (Using middleware)
3.- In R/3, a customer program (Z), does a lot of calculations to the order (rejection, item splitting, Qty changes, creation of new Items, etc) and once its done, it populates the IDOC and sends the information to CRM (ORDERS05).
4.- CRM receives the IDOC, modifies the order.
5.- Document is update from CRM in R/3 9Using middleware)
The Z program, DOES NOT modify the database in R/3, it lets the process to be executed and also lets CRM to do this job.
I had to make several modifications to the XIF module, in order to allow many of those changes to be valid in CRM (i.e., A rejected ITEM is changed to be valid and it's Qty changed. CRM does not allow this to be done in one step, since the qty is "greyed" for no changes).
Edited by: Rob Burbank on Feb 17, 2010 5:34 PM

My issue is this.
The worst thing that happened, is the fact there is key fields in R/3 -> CRM, to link the schedule lines, since R/3 Uses the regular key fields in the T. table, CRM uses the GUID for the sched. lines.
After a OSS msg and many goes and comes, I had the suggestion from SAP to change from ORDERS05 Idoc into CRMXIF_ORDER_SAVE_M01 idoc, since ORDERS05 is not supported by CRM (however the Idoc is in the system).
I am not sure that is the best solution, in fact I do not believe that is a solution at all. CRMXIF_ORDER_SAVE_M01 does not exist in R/3 and even if somehow I do all the effort to create it in R/3, R/3 still does not have the schedule line GUID to properly point to the right record.
What I did to override this error, was to include inside the XIF module the CRM_APO_SALES_SELECT_GUIDS, CRM_ORDER_READ and CRM_ORDER_CONVERT_DOCNUMBER Functions to get all the sched lines for the specific orders in the guid form. However this solution does not work OK, since sometimes the CRM system is not able to properly return the correct GUID values and this leads to the duplicate schedule lines error.
If somebody has ever deal with a situation like this, I will appreciate if could share its point of view or even better, share the solution used.
As an extra comment, modifying the Z program to update the database and let middleware to do the job for us, is ou of the qustion at this momento.
Thank you for your time and help.
Sincerely
Meuli
Moderator message - Welcome to SCN.
There is a 2,500 character posting limit, but in this case I split it in two.

Link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH)

Similar Messages

Maybe you are looking for