Link between queries and roles

Hello,
Could someone tell me if there is a way to have an overview on the link between roles and queries?
For example a table which give us a role and the liste of queries which are linked to this role.
Thanks in advance.
Hicham

Hi,
I also had same query :
mapping between the query/report and the role with technical names - BI Sec
Its a bit tricky.
Actually there are no direct linkage between queries and roles. However, you can look up S_RS_COMP in the roles that will help you identify which all queries the role gives access to.
Regards,
Zaheer
Edited by: Zaheer on Aug 28, 2008 4:19 PM

Similar Messages

  • PS roles for making object links between cProjects and PS

    Hello to everybody!
    Does anybody could give me a favour and tell which role I should grant to the user in order to allow him make object links between cprojects and PS elements from cProjects. I have already granted authorization to CJ01, CJ02, CJ03 and CJ20N transactions, but JA 027 == No authorization for action Display === error message still occurs. SU53 shows that everything is OK. 
    Thank you.

    Hi,
    I´ve the same problem, I´m in tx CJ20N but I don´t know how to add my user in Access Control List (ACL) in CJ20N
    Could you explain me how I can do that?
    thnaks a lot and best regards, Sapera

  • Link between reports and universes and universe name change

    I want to change a universe name.
    What is the impact on my WebI reports and DeskI reports ?
    Is it risky ? Will the link between reports and universes be saved ?
    Does someone know how the link between reports and universes works for WebI reports and DeskI reports ?
    Thanks

    Hello Umberto,
    I recommend to post this query to the [WEBI|SAP BusinessObjects Web Intelligence; and [DESKI|SAP BusinessObjects Desktop Intelligence; forums.
    These forums are monitored by qualified technicians and you will get a faster response there.
    Also, all Webi and Deski queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • DB LINK between XE and 11g instances

    Hello ,
    I am facing the following problem.
    I have 3 databases instances on 3 servers on is Xe,the second is 10 R2 and
    the third instance is 11g.
    I have create db link between Xe and 10g and vice-versa (10g and Xe)
    the db links in the two senses are working fine.
    But i could not create db link between xe and 11g nor between 11g and Xe.
    I will give some detail
    On Xe dblink pointing to 11g , when accessed give the message :
    "ORA-01017 : Invalid username/password;logon denied ORA-02063 preceding db11g"
    i am sure that user name and password i give in db link creation are correct and tried it many times.
    From the other side
    On 11g dblink pointing to Xe instance when ,accessed give the folowing result :
    i could access some table (select * from t1@dbxe)
    but some times i got message : "Internal server Error" for the same select on the same table.
    When i try to access fonction f1 on dbxe from 11g instace , i got the message
    "ORA-04052 : Error when quering remote object f1@dbxe ORA-00604.."
    Does any body have some idea about the issue ?
    thanks in advance.

    Is your 11g database configured to use case-sensitive passwords? If so, are you specifying a case-sensitive (quoted) password in the creation of your database link?
    Joel

  • Table link between activity and order

    Hello,
    In Cic0, we create activities and complaints related to a customer order.
    I do not find the link/the table which enables me to make my report (number activity with the linked order).
    I seek the table which gives the link between the activity and the order.
    Do you know it?
    Many Thanks,
    Servane

    First, you need to get the guids of the activity and complaints. (it is enough to use the table CRMD_ORDERADM_H only)
    Second, In table SRRELROLES use the above guids in field objkey and get the RoleID. (Now you would get two Role id's)
    Finaly, in table CRMD_BINREL you would have the link between these two roles. (called Role A and B)

  • Difference between profile and role

    Can any explain me the difference between profile and role.
    I was given a user Id on ABAP stack of XI.
    My profile: SAP_ALL
    I was not assigned any roles.
    I am not sure if I need different roles or this profile
    would serve the purpose.
    -Naveen.

    Hi Naveen,
    Adding to Gus points a few more inputs.
    Profiles were the menas of assiging authorizations to users until 4.0 Versions.
    Later to the same it was upgraded to the concept of Roles. The crux always remains the same.
    Be it a profile or a role, it contains the Auth Object and the respective values.
    But in present scenario, you can get confused by the profiles that are assignable to Users.
    IN short the following points can be helpful.
    1. The profiles like SAP_ALL;SAP_NEW,S_SPO_ALL etc are standard Profiles delivered by SAP which when assigned to a user in his profile in SU01 would get all the related authorizations.
    ( You must be lucky to have SAP_ALL assigned to ur ID by ur basis guy)
    2. A role is created by assigning a few transactions to this role and when this role is generated, it generates a PROFILE. But this profile is a system generated one and cannot be ever assigned to any user. These profiles can be sorted out as they have the standard naming like T-XXXXXXXX where they are the numbers and it can never be assigned to any user.
    3. Note prior to 4.0 its all Profiles that are assigned to users and later to the same came the concept of Roles and hence this change.
    Hope the answer is helpful in making u undersand a few inputs form my side.
    FYI:
    Method to create a role can be checked out from the link below.
    http://help.sap.com/saphelp_bw21c/helpdata/en/52/6714b6439b11d1896f0000e8322d00/frameset.htm
    Br,
    Sri
    Award points if answer is helpful.

  • Link between Delivery and Sales Order Schedule Line

    Hi Gurus,
    I have a requirement in which i need to display quantity and amount at schedule line level and also the delivery and delivery item for each schedule line.
    For example, if there is a sales order O1 and item 10 for which we have 3 schedule lines and 3 deliveries as well say D1, D2 and D3.
    Report should be something like this
    Sales Order    Item   Schedule Line    Delivery    Del Item   Confirmed Order Qty
    O1                 10      1                       D1           10            5
    O1                 10       2                      D2            10            5
    O1                 10       3                      D3            10            4
    How can i determine that a particular delivery corresponds to which schedule line of that saler order-item?
    We have the link between delivery and sales order but is there any way that we can get the link of delivery at schedule line level?
    Please help.
    Regards,
    Gaurav

    Hi,
    I suppose you must check with SD functional consultant and the post should also be in the logistics SD forum and not BI. But I suppose there is know specific link between the schedule line of SO to the Delivery. It is more like a bucket flow for ex.
    Sale order   Item    Schedule line  qty
    SO1            Item1     Sch1            10
    SO2            Item1      Sch2           10
    Delivery Item QTy
    DO1       IT1   15
    DO2       IT1    5
    In this case qty 15 is distributed over both SO1 and SO2, and SO2 ITem1 Sch2 has link to both the DOs
    So I am not sure if you can establish a one to one link, please check with your SD consultants.
    Regards,
    Ashwin G

  • Link between sd and pp

    hi all,
      i have a problem regarding relation or link between sales and production order. i have to fetch production order number related to sales order number. i have checked in the table AFPO that is production order item table , there is field AFPO-KDAUF and AFPO-KDPOS ie, sales order and sales item. but when i see these two fields there is no data into the field so how can i get data into the table related to production order.can anyone help me on this issue.

    Please refer to the below links -
    https://forums.sdn.sap.com/post!reply.jspa?threadID=309885
    Integration points with MM/IM and PP are some of the following -
    When a Production order is created and released a reservation gets created for the materials in BOM
    When the reservation is created and materials are posted against the reservation with mvt type 311 these are transferred to the respective location.
    When a GR is posted with mvt type 101, the Finished or Semifinished goods are posted to the respective storage location and inventorized.
    When a consumption is posted with mvt type 261 then stock will get reduced in resepective storage location.
    When a batch determination is done in a production order basing on the batch search strategy and sort rule material, quantity and batch are selected.
    If WM is configured an associated internal movement for all the above movement types will be posted.
    During MRP, BOM which is a master data for PP is used to calculate the dependent requirements of materials.
    During availabilty check of a production order basing on the availability check configured materials will be selected and checked.
    Hope the above may help you.

  • 'Is there a link between OLM and iProcurement'

    I have been asked 'Is there a link between OLM and iProcurement'? The person posing the question is wanting to create trainers as suppliers and I know that the supplier information is shared between OLM and the A/P, A/R and G/L modules and I presume that the link to iProcurement will be via one of these modules however is there a more direct vanilla link between OLM and iprocurement?
    Any help would be great
    Thanks
    DM

    I am afraid there is no link between the iProc and OLM.
    The closest that apps can offer you is that your learner/delegates can be of type external i.e. being an Organization or a Customer. Hence there exists a link for your delegate to be a customer(hz_parties).
    However this might be a future integration i.e. Trainers being suppliers. I am saying so because in 11.5.10 there is a table named OTA_VENDOR_SUPPLIES that has reference to vendor_id. Currently this table is not being used by OLM.
    You may look into the code of packages OTA_VSP_API, OTA_TEA_BUS & OTA_PLE_BUS and see if Oracle's future functionality will converge towards your business requirement.
    Thanks,
    Anil Passi
    http://oracle.anilpassi.com

  • Link between Project and Sales Order

    Apart from sales order can we have a link between project and customer master ??
    I know that WBS element assignment can be made in sales order but i want to have link between
    customer master and project. I don't want any user field or text field in sales order.
    Any idea ?
    Regards
    Ashish

    Yes Mr Ashish!
    As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
    I'll let you know if i find any links.
    Regards,
    ANSAR

  • Link between Item and delivery

    Hi ,
    I want to know the link between item and deliveyr. Like for example, an sales order item ( no. 10) containing 10 quantities can be delviered 5 times( each containing 2 quantities) and line item ( no. 20) can contain one single delivery. I am working on a report where i have to link all the line item to its delivery number. I am trying to achieve this through GENIl but i am not able to indetify as to how to differentiate the different deliveyr numbers. In other words, can some one help me as to how to link the delivery number to its corresponding items?

    Document flow is stored in the table VBFA in ECC.
    VBELV fied is the sales order number and in POSNV specify the line item number and speicfy VBTYP_N = J (Delivery).
    Regards,
    Bhanu

  • Link between GTM and FSCM (sales or purchase order hedging)

    Hi all,
    I am trying for a few days to have SAP GTM working (I am in an IDES ECC6 system, and as far as I know in EhP4 version). The main goal in fact is to test the currency hedging, and therefore to the link GTM and FSCM, either single-sided purchase or sales order, or two-sided . The flow I want is the following :
    -     I buy or sell a product, in GTM, through a trading contract which generates a purchase or sales order.
    -     Automatically a currency hedge is generated to cover the risk, in FSCM, I guess in exposure management.
    -     And then the financial products (derivatives) are generated as well.
    No problem to create the trading contract, no problem to generate the sales or purchase order. But in spite of the (very little) customizing I found in u201CSAP GTM => currency hedgesu201D, and some in FSCM, in u201Ctreasury and risk managementu201D, no way to have this link between GTM and FSCM, no additional document is generated like a Forward Exchange Transaction (I guess I should have this, and then a risk exposure in FSCM).
    Would you have an idea ? Is this customizing, or an additional Business Functions or Extension Set not activated ? SAP says : u201Cit worksu201D, but canu2019t find the way.
    Thank you very much for your help, I am quite looking for this link for a few days now u2026
    Best regards
    Patrick

    Yes Mr Ashish!
    As far as iam concern there is no link between Project & Customer Master, you have to link it with SALES order, I had check in XD03,XD01, the complete customer master, i didnt find any field in customer master which links with Project.
    I'll let you know if i find any links.
    Regards,
    ANSAR

  • What is the link between PO and Requisition in database side

    hello friends,
    please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
    want to know that what is the link between both in database side.
    Thanks in advance
    krish.

    Hi,
    The link is at distribution level, between:
    PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
    and
    PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
    Hope it helps.

  • Link Between AP_INVOICE_PAYMENTS_ALL and AP_PAYMENT_SCHEDULES_ALL

    Guys,
    I am new to Oracle Financials, can you please let me know if my understanding of link between AP_INVOICE_PAYMENTS_ALL and AP_PAYMENT_SCHEDULES_ALL is correct or not?
    SELECT ai.invoice_id
    , ai.invoice_num
    , aps.due_date
    , aip.accounting_date
    , aip.amount, aip.payment_num
    FROM ap_invoices_all ai
    , ap_invoice_payments_all aip
    , ap_payment_schedules_all aps
    WHERE aps.invoice_id = ai.invoice_id
    AND aip.invoice_id = aps.invoice_id
    AND aip.payment_num = aps.payment_num

    plz look at seeded view AP_DOCUMENTS_PAYABLE
    FROM
    ap_invoices_all ai,
            ap_invoice_payments_all aip,
            ap_payment_schedules_all aps,
    WHERE
    AND aip.invoice_id = ai.invoice_id
    AND ai.invoice_id = aps.invoice_id
          AND aps.payment_num = aip.payment_num
    ...your code a bit different by
    AND aip.invoice_id = aps.invoice_idbut it's ok
    >
    AND aip.payment_num = aps.payment_num
    Is this correct?
    >
    yes

  • Link between PR and RFQ

    Hi all,
    I looking for a table where I got a link between e PR and the RFQ which refeer to that PR. We can see in ME53N in the Status tab the RFQ number. I want to fine a table where is that link between PR and RFQ.
    We can see the link in EKPO with the PO number  only if a PO is done from the RFQ (field BANFN).
    If I look in EKPO with the RFQ number, the field BANFN (PR number) is empty.
    I don't find a table with a link between the PR and the RFQ if the PO is not done (nothing interesting in EBAN)
    May someone help me ?
    Thanks all
    Regards
    Mathieu PAINEAU

    Hi all,
    I found by myself ! This link is done in the Table EKET.
    Regards
    Mathieu PAINEAU

Maybe you are looking for