Link between the mode of transport and storage location in IS-OIL Dn Stream

Hi
I am working on IS-OIL Downstream, and while testing the scenario of Purchasing from the other plant (through Purchasing Contract) through Data Collation I am facing a typical problem, and I hope I will get the solution on this.
I am doing the SR Report first and executing the same. After this I run the HR Report and I am putting the difference qty in EUB Item type. When I am verifying this the system is adjusting the qty and proposing the storage location, as per the mode of transport. Means if I maintain the mode of transport in Purchase Contract, for ex if it is 02 -- Train, the storage location will be train. But, I would like to know where is the link between the Storage Location and Mode of Transport, so that I can tell the system to pick up the particular storage location (currently it is picking up wrong storage location).
I will be grateful if any one helps me...
Thanks and Regards,
PKM

Hi pkm,
if you are working with the OGSD component Data Collation then there is no direct relation to the transport mode. The Data collation is only supporting a vehicle.
Best regards,
Fouad

Similar Messages

Do you know the link between the sales order item and functional location ?

How know the functional location if I know de sales order number and item ?
Wich table or bapi ?
Tks.

Hi,
I think there's all details in my question.
You answer is right only if I need to know the functional location at AUFNR level.
Is not my case, I need this information at sales order level.
Regards,
Roberto.

In which table the link between the R/3 vendor and SRM vendor no are found?

Hi experts,
Can anay one tell me in which table exactly where we can find the relation between the R/3 vendors who are replicated to SRM and material groups which are replicated to SRM.
I just want to know th backend number and the frontend Number of the above two
please help me.
Regards,
Sairam.

Hi Sai,
All the replicated material groups from back end R/3 can be seen using COMM_HIERARCHY transaction as categories.
You can choose category as the search criteria and then click start tab to view all the replicated material groups.
In the VENMAP table you can see all the replicated vendors from back end along with their logical systems from which they were replciated.
Using PPOSV_BBP transaction you can see all the replicated vendors in your Vendor Group along with the vendor code and Business partner number.
Hope this resolves your query. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

How to make the link between the technical version and the packaging vers.

Hello,
Does anyone know how to make the link between the technical version number and the packaging version number ?
For exemple, I can download on the SAP Market Place the version B1iSN 8.8 PL7 but if I look into the B1iSN the version information, it returns B1iP_3.0_SP04_HF03.
This is quite confusing.
Thank you.

Hi Gordon,
In fact this information is usefull for me. I was looking for a customer installation but he did not remember which version was installed. They are facing some problems. So I don't know if I have to update B1iSN or not to solve it.
B1iSN returns only the technical version number, but I would like to know which version was downloaded from the Market Place.

Link between the Ibase & Ship to Party

Hi,
I need to find out who is the Ship to party of the Ibase. I have the Ibase as the input. No other details.
IB53->GOTO->Partner->Ship-To Party
Can I know any table or FM through which I can find this.
Thanks
Kris.

Hi Krishna
Table CDBD_IBPART will give you the link between the IBase, Partner function and Partner number.
From the table CDBD_IBIB, you will get the IBIB_GUID for a particular IBase. Put this IBIB_GUID in the REFGUID field in table CDBD_IBPART. So, from the field Partner_Fct you get the Partner function(Sold-to party, Ship-to party, etc) and the field Partner_No gives you the GUID of the partner assigned to the IBase.
Hope it helps.
Plz reward points if helpful.
Thanks and Regards
Debolina

Link between the Schedule Lines and the GR document

Hi
I would like to find the link between the Schedule Lines (of Scheduling Agreement) and the GR document. i.e. which GR has been made against which Schedule Line. I have checked the tables EKET, EKBE, MSEG but there is no link with the Schedule Line, I found the link only with the item number there.
Thanks
Prashanth

Hi
At the time of posting the GR for a SA you will be not posting this with reference to the Schedule line of the SA item. So system will always update the GR document against the SA item and update qty on the schedule line.
May be this is the reason we donot have any direct relation ship to material document and Scheclue line
Thanks & Regards
Kishore

The relationships and links between the various SAP database tables

Hi Gurus,
I am trying to learn the relationships and links between the various SAP database tables (SAP FI-AA, SAP SD, SAP MM, SAP HR and so on) for correctly extracting data from them. Especially I am expressing an interest in the SAP database tables on SAP FI-AA, SAP SD, SAP MM, SAP HR. Could somebody provide me with documentations about the relationships and links between them. I will be very grateful if somebody can provide me with links.
Thanks and regards
Sergey

hi Sergey,
try
http://www.erpgenie.com/abap/tables.htm
http://www.erpgenie.com/abap/tables_fi.htm
http://abap4.tripod.com/SAP_Tables.html
http://abap4.tripod.com/Finance_Tables.html
http://www.auditware.co.uk/SAP/Extras/SAPTables.pdf
hope this helps.

How to find link between the field (kzbew) mvt.ind. and the (ebeln) ?

Hi all,
while finding the link between the kzbew and the ebeln the only table i found is MSEG.
But i want to populate the data in this table only?
So please give me the solution how i can fetch the movement indicator for a particular purchase order?
As i am using the idoc segment MBGMCR02((for creating goods receipt)...i have to pass the movt. indicator with the movement type also.......?

the field - description in MSEG says:
Movement Indicator
Specifies the type of document (such as purchase order or delivery note) that constitutes the basis for the Movement.
Use
This indicator is necessary, for example, to enable a distinction to be made between a goods receipt for a purchase order and a goods receipt for a production order. These two goods movements result in different data
and account updates in the system.
Dependencies
The movement indicator is derived from the transaction code.
what transaction do you want to use for your idoc?

Delete the link between the BEx Query and workbook

Hi Experts,
I have a workbook it contains 6 querirs, now i want to delete both.
insteated of delete the first queries in workbook, i deleted directly workbook.
now its not allowing me to delete queries.
i think internally it will maintain a link in some table and there was a programme to delete that link between the queries and workbooks.
Please let me know the programme name which we can delete the links between the queries and workbooks.
Thanks,
Babu

Before even going for changing the table entries.
You can go to query and do "Where used" list if it refers only to the same workbook(which you deleted) then it may be inconsistency.
But the chances are the query is used in workbook or WAD etc and is present in someone else's favorites so that would make the workbook void.

Link between implementation project configuration (SOLAR02) and ChaRM?

Dears;
We want to benefit from listing all IMG Objects and developments in an implementation project (SOLAR02) to control our transports as we have ChaRM activated on the affected systems.
But there seems to be no link/control which has several consequences:
*Status of "changes" in ChaRM and related developments in the implementation project have to be tracked seperately
*There is no link between the development in the project (SOLAR02) and the created TR.
*There is no limitation/control in the content of the TR if it concerns items not listed in your project => how to check if the project is up-to-date?
Are my assumptions correct? Or am I forgetting something?
What is the experience in maintaining changes (transports) for implementation project? On what level? Linked with the structure in Solar02 or completely independant?
I have done quite some reading around the topics but documentation around project management via SolMan and ChaRM via SolMan seems never to be really connected? (only the overall status of the project and the activation of charm via SOLAR_PROJECT_ADMIN)

>
Jett Jiang wrote:
> 1. Active Change Request Management. the inter-connect is in SOLAR_PROJECT_ADMIN.
> 2. Use normal correction to control the TRs and updates the documents at the same time.
Thank you for the reply. Concerning these points:
1) This is done... No questions there
2) The "and" in your sentence means that I myself have to do both things? So there is no link?
So this does mean that (what my understanding was) I have to create a normal change via ChaRM but under the project for example a certain business scenario. That developers work on all topics related and should "remember" that if they put something under that transport they should verify if this is documented in the SOLAR02?
If then the change is put to testing they should manually update the status of everything related to this transport in the SOLAR02...

What is the difference between the 2011 airport extreme and the old version

As per title if any one can help. What is the difference between the 2011 airport extreme and the old version

According to the FCC reports, there is a significant difference in the power output of the g/n radios at both 2.4 and 5ghz.
Follow the following links, then select the "Report" for each.
Previous Version...
http://goo.gl/B8PIu
Current Verison Version...
http://goo.gl/3yKRl
Previous model...
freqency range      mode                  output power dbm      output power watts
2412-2462            802.11b               24.57                        286.42
2412-2462            802.11g               21.56                        143.22
2412-2462            802.11n(ht20)       21.17                        130.92
5745-5825            802.11a               23.07                         202.77
5745-5805            802.11n(ht20)       22.17                         164.82
5755-5795            802.11n(ht40)       21.44                         139.32
New Version...
2412-2462            802.11b               24.10                         257.04
2412-2462            802.11g               24.88                         307.61
2412-2462            802.11n(ht20)       24.11                         257.63
5745-5825            802.11a               25.14                          326.59
5745-5805            802.11n(ht20)       25.28                          337.29
5755-5795            802.11n(ht40)       25.94                          392.64
This should mean a fairly significant increase in range with the new model. I would imagine these changes would be consistent with the Time Capsule as well.

Link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH)

Hi!
Is it possible to find some link between Ivnoice A/R (OINV) and Ivnoice A/P (OPCH) without using batches, serial numbers and UDFs?
Any ideas?
Thanx!
Regards,
David

Hi David,
I only known of 1 link possibility.
If you created the purchase order from the sales order (and the invoices are based on the orders) you can find the purchase invoice through the Purchase order, Sales Order, Sales Invoice.
Regards
Ad

Link between SAP R/3 KPRO and SAP Portal

I'm looking for a link between the archive <b>KPRO</b> of SAP R/3 and the content of <b>SAP portal</b>. In particular I'm interested in a link for the documents loaded in the KPRO archive in SAP R/3 and the SAP portal.
Theank you for the interest.

Hello Luca,
here are some informations about KM Connector for DMS:
Software:
Service.sap.com/patches
-> Entry by application group
-> BP for DMS Connector KM 1.0
Or Software and Documentation:
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
     Browse Content Portfolio
     Choose: Every User Content & Document Mgmt
     Choose: BP for DMS Connector for KM
     Choose button: Documentation (on the upper right corner)
Regards
Thomas

Is there a link between ASCP released planned order and purchase requisition?

Hi,
i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
thanks

Hi,
As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
Hope that helps.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Differences Between The Asus P67 EVO And Pro?

Anyone know of the differences between the Asus P67 EVO and the Pro?
I want to buy an Asus P67 Pro Motherboard today, but there are only 2 left at Fry's and they are both open-box returns and the other Fry's has only 6 left and ALL are open-box returns. So I'm thinking there may be an issue with the Pro's?
Is the EVO just as good?
On the Asus site specs, it seems the only differences are:
(and I'm not sure what any of the following means)
-On the Pro, the PCIe x16-3 slot shares bandwidth with the ESATA12
-On the EVO, the PCIe x16-3 slot shares bandwidth with the ESATA3G and the PESATA3G
-The EVO has dual LAN's
-The EVO has a CMOS Switch
-The Pro has the "System Panel" Q-Connector
Adobe seems to be heading towards allowing 2 video cards.
Would the EVO limit me if this happens?
I notice there's only one EVO on the PPBM5 site in the upper realms (Novak).
There seems to be more Pro's.
I don't plan on doing huge overclocking, maybe minor.
Components to be used:
-i7 2600K
-Corsair Vengeance 16GB
-Corsair AX 850 Watt Gold
-EVGA GTX 460 1GB Superclocked
-OCZ Agility 3 SSD 120GB
-Seagate Barracuda 3GB Storage
-Seagate Barracuda 1GB for Exports, Page File, Previews, Media Cache
-Seagate Barracuda 3GB Storage in Acomdata Samba External Enclosure for Backup
-WD My Book 3GB External for Another Backup
Any help would be appreciated.
Thanks Guys.

addiZ wrote:
I'm going to use my MacBook mainly for gaming and editing videos
Don't get the 13". It only has an integrated video card. Both the 15" and 17" models have an integrated as well as a dedicated video card.

Link between the mode of transport and storage location in IS-OIL Dn Stream

Similar Messages

Maybe you are looking for