Link Between two worksheets in Discoverer

Hi...
I'm trying to create a link between two worksheets without success.
What I have is a 'General Ledger' worksheet which lists the journal source for a particular account code that is selected by the user via a parameter. Say the journal source is Accounts Payable invoices, what I want to do is have another worksheet which is 'Accounts Payable' and on that worksheet I want to be able to list all the invoices that make up the journal total on the 'General Ledger' worksheet.
I have tried to create a link using a sub query condition but when I run the report, the first part 'General Ledger' works fine but when I click on the 'Accounts Payable', I get a "Invalid Number" error message.
I am going to need to create these type of links for various reports.
I would be very grateful if anyone can please advise on how to create the link.
Thanks

I think you're on the right track with the subquery. So, the wrong number error must be related to the format of the columsn you use for the subquery.
Alternatively, if the account number you've created the parameter for in sheet 1, you can use the same parameter again for sheet 2 (then check "only one value for all sheets" for that parameter). But this obviously only works if that account number is in the second sheet too...

Similar Messages

Change or delete the docflow link between two existing documents

Hi All,
Is there any FM or soulution to change the doc flow link between two documents .
For ex .. i have document A and document B , and created a doc flow link from A to B , Now i have to change the succeeding document to C
I have tried to modify the doc link ,but its not working using crm_order_maintain.I thought of deleting the link between A and B and then create a new link Between A and C , but deletion of link bewteen A and B is also not working.
I have checked with FMs CRM_DOC_FLOW_DELETE_CHECK_EC and CRM_DOC_FLOW_DELETE_EC, followed by CRM_ORDER_SAVE AND COMMIT . i could not find any exception from this FMs , but still the doc link is not deleted.
Pls share if you have any suggestions.
Regards,
Nithish

Hello
I wrote a report to delink items from document flow. I uploaded it [here|http://wiki.sdn.sap.com/wiki/display/CRM/Removelinksfromdocumentflow].
Please, use with caution and always perform careful tests before you run it in a production envinronment.
Hope it helps
Joaquin
Edited by: Joaquin Fornas on Nov 15, 2011 11:49 AM

View Link between two query views

Hi is it possible to create a view link between two views having the where clause bind variables.
How you set the bind variables at the run time for the View objects. It is giving hard time for me to use the Master view in the XmlData bean to generate the Xml document.
I am able to set the Master views bind variables, but for view link destination view
where clause bind variables are not able to set ( link object link condition bind variables are binded run time but the views where chause bind variables of destination view are unable to setand bind)
Thanks
null

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Linking between two workspaces

Good afternoon all,
I was wondering if there was anyway for me to link between two workspaces on the same schema.
What I currently have set up is two workspaces (1 and 2). I have done a lot of work on 1 and built a Single Sign On application to manage my applications. Workspace 2 was created for a separate team, but I would like some sort of authentication. I was wondering if there was anyway for me to leverage my existing app in Workspace 1 to authenticate for applications in Workspace 2.
My guess is that it's not possible, but I figured I might as well ask around to see if there is some weird hack around it.
Thanks in advance,
Ivan

Alright I'll post it on there. Figured that InDesign users would know more about the links and how to set them up. Thanks for the advice.

Create view link between two view objects (from programmatic data source)

Hi Experts,
Can we create a link between two view objects (they are created from programmatic datasource ; not from either entity or sql query). If yes how to create the link; ( i mean the like attributes?)
I would also like to drag and drop that in my page so that i can see as top master form and the below child table. Assume in my program i will be only have one master object and many child objects.
Any hits or idea pls.
-t

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Link between two or more reports

Hi All,
I want to make a link between two Hyperion Financial Reports. I'm working on HFR 9.3.1 version.
For example :-
There must be an option in report, like a hyperlink to open another report. After a click on the link it will open the linked report.
I tried one option "Add releated contents" but that works only on grid which are having cell values but what I'm looking is to give a link on text and from that text link user will able to navigate.
Regards,

Sorry I just thought of a workaround
You do have to use related content on a data value but you can use formatting to hide everything but the link. Use the REPLACE tab within the cell format to relace the data value with a text string (what you want your URL to display as). If you want it as a menu then you could do this in a seperate grid altogether to save you having to mess with your actual report grid too much.
Hope this helps
Stuart

Go URL linking between two reports with no relation

Hi Experts,
Sorry this question may have been asked numerous times, but I was not able to fetch the required response.
I have two reports Repor1 based on Table 1 having columns A and B, Report2 based on Table2 having columns C and D.
First is it possible to create a go URL moving between two reports based on tables having no replationship between them?
My requirement is to create a hyperlink on column B in Report1 so that when a user clicks on the hyperlink it takes you to report2 and filters report2 column C using values of Table1 coulmn A. Table1 and Table2 have no relationship between them.
Thanks in advance,
Anura

I had two columns in my report1 first being market and second being a measure value, i provided the following link in the formula for my measure value and made that as HTML data format, my Report2 contains the market column with one more additional coloumn and i want my second report to be filtered based on Market value in Report1.
I don't know why but the URL that is being displayed here is not the actual url, please click on the URL to knowthe complete url that I mentioned for the formula
'’||CAST(Sales Measures.Dollars AS CHAR)||’'
The value of Market.Region is not being passed correctly as my Report2 gives the following message in the results view when i move from Report1 to Report2 via the hyperlink
Region is equal to '||Markets.Region||'style="text-decoration:none;
Please suggest what is going wrong?
Thanks in advance,
Edited by: Anurag007 on Jul 29, 2010 2:46 AM

Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.

Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers

How to create Doc Link between two document numbers?

Hi Folks,
I have two document numbers with different transaction type.
I want to create a Document link between these two documents, i.e. each documents should come in Dock Flow of each other.
How to acheive this target.
I tried to do it by using FM CRM_DOC_FLOW_MAINTAIN_OW, but not able to achieve it.
So please tell me how to do this thing.
Regards
PG

Hi PG,
The FM CRM_DOC_FLOW_MAINTAIN_OW should work , I am not sure what parameters you are passing. Any way you can use the CRM_ORDER_MAINTAIN as well which will eventually call CRM_DOC_FLOW_MAINTAIN_OW . Have a look of the sample code, This will give you some idea
lw_input_field_names-fieldname = 'GUID'.
      INSERT lw_input_field_names INTO TABLE lt_input_field_names.
      CLEAR lw_input_fields.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_h.
      lw_input_fields-objectname = gc_object_name-orderadm_h.
      lw_input_fields-ref_guid    = lw_orderadm_h1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_h-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-header_header.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_h1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_h.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CLEAR lw_input_fields.
      REFRESH lt_doc_link1.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_i.
      lw_input_fields-objectname = gc_object_name-orderadm_i.
      lw_input_fields-ref_guid    = lw_orderadm_i1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_i-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-item_item.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_i1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_i.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        CHANGING
          ct_orderadm_h     = lt_orderadm_h1
          ct_input_fields   = lt_input_fields
          ct_doc_flow       = lt_doc_flow1
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RAISE error_occurred .
      ENDIF.
Hope this will help.
Thanks,
Vikash.

Link between two reports.

as per the requirement of my system, i have a report based on some table say which shows day end balance for a particular customer. in this report i want to give a link which shud open another report to show last ten transations .
how to do this ?
thank u in advance
but expecting solution
chaitali

You need to create a LINK object between the two reports.
When you build the link it will ask you for a target. Your target is your second report, which must accept a parameter.
Next you edit the second report under the Column Formatting tab (which is number 2 tab under the report editing options) in the link drop-down you will find your new link which you created. Edit the link and set parameter to the column you want to pass from report 1.
Hope this help.
Jason Pepper

Links between two separate PDF documents - one as reference for another.

Hello, everyone.
I have a special project that I believe would be best addressed with the creation of two independent but linked PDF files. Let me be more detailed.
My plan is to create a PDF file as a text document. In this text document there will be numerous references to documents and articles that I intend to place in a second PDF file. I would like the user to be able to open the text document PDF on the left side of his computer screen and also open the reference PDF with documents and articles on the right side of his computer screen. Every time the user comes across a section of the document that offers a link to an external reference the user would be able to click on it and the PDF on right would display the page corresponding to the reference on the PDF on the left. I hope this makes sense.
Is it possible to create PDFs with this type of relationship ? I am guessing that in order for these links to work both PDFs will have to reside in the same directory so that the links (relative links in this case) may work properly. Is this true ? How can I make this work and is there a good document I can read or tutorial I can watch that would describe this in detail ?
Thanks in advance for your help.

Hello, try67.
Considering what you share I don't think this solution is the right one for me. I am trying to find a simple solution that would allow me to accomplish this task. Considering it would require scripting or programming the solution has just become more complex than what I feel I can comfortably handle.
Thank you anyway for your help.

How to get the 'link' between two tables

hi pple
i need to find out HOW two tables are related.
sample tables:
SHIPS ( HULL_ID [PK] , VESSEL_NAME, GROSS_TONNAGE )
EQUIPMENT ( E_ID [PK] , HULL_ID [FK frm SHIPS], DESC )
PARTS ( PART_ID [PK] , E_ID [PK, FK frm EQUIPMENT], MANUFACTURER_ID)
--> SHIPS and PARTS are some how related thro' EQUIPMENT.
i need to get this relationship:
Ships --> Equipment (E_ID) --> PARTS
currently, i can get the direct parent and child tables of a given table using:
SELECT lpad ( ' ', 2 * ( LEVEL - 1 ) ) || table_name as Child_Tables
FROM ALL_CONSTRAINTS
START WITH R_CONSTRAINT_NAME in
select constraint_name
from all_constraints
where table_name = '%table_name%'
and constraint_type = 'P'
CONNECT BY PRIOR CONSTRAINT_NAME = R_CONSTRAINT_NAME ;
To get ALL parents:
SELECT lpad ( ' ', 2 * ( LEVEL - 1 ) ) || table_name as Parent_Tables
FROM ALL_CONSTRAINTS
where owner = 'CHARTUSER'
START WITH CONSTRAINT_NAME in
select constraint_name
from all_constraints
where table_name = '%table_name%'
and constraint_type = 'R'
CONNECT BY PRIOR R_CONSTRAINT_NAME = CONSTRAINT_NAME ;
what i need to do is:
1) get children & parents of SHIPS
2) for each element of (1), get children, parents till i get PARTS
3) so, i will get EQUIPMENT and then, PARTS.
this wud be very expensive. my appln is in Java and i will need to call these functions - that makes it more complex. is there any simpler way out?
and my main problem is to find out WHAT attributes line two tables. this wudnt be a big deal if it were just simple parent-child tables. but, how do i find out the attributes that link PARTS and SHIPS table?
any ideas? -please help.
thanks in advance
--$uDhA

Dear Srikanth,
This tables can be used once we come to know whether its a customer or vendor line item but in our case we using the GL account as reference have to knock off the entries.How we come to know that aginst the GL whether its a customer or vendor line item.. Then it should route to this table.
Suggest me if any options are there.
Regards,
Balaji.c

How to compare data between two worksheet in Excel for applescript

Hi All,
How to compare the data from two different worksheet in Excel and set the value into one worksheet according to the same name? Here is the example. Worksheet 1 & 2 current we have, the final worksheet is the result we want and the value can be input in worksheet 1. Much appreciate if you can help on it.
Worksheet 1:
Name          Number
Leo                 25
Jame               55
Leo                 30
Jame               60
Tim                 44
Tomas             77
Lyne                35
Tonny              66
Jame               22
Game              88
Worksheet 2:
Name          Number 2
Leo                60
Jame             150
Tim                66
Tomas            88
Lyne               55
Tonny            99
Game             111
Rusult in Worksheet 1
Name          Number        Total Number per name in Worksheet 1         Number 2 in Worksheet 2
Leo                 25                          55                                                        60
Jame               55                         137                                                       150
Leo                 30                           55                                                        60
Jame               60                         137                                                       150
Tim                 44                          44                                                         66
Tomas             77                          77                                                        88
Lyne                35                          35                                                        55
Tonny              66                          66                                                        99
Jame               22                         137                                                       150
Game              88                          88                                                        111

I'd probably use a database for this, if there's any quantity of data involved here. Import from Excel into {SQLite, MySQL, PostgreSQL, FileMaker, maybe Core Data}, or pick your preferred key-value store, keep your data in the database, then export or (via ODBC/JDBC) then access live database data from within the spreadsheets.
Alternatively and if you're looking at small quantities of data (say, less than 10,000 entries, or less than a thousand depending on the language), then just use whatever passes for a key-value store in your preferred scripting language {Python, bash, Lua, or maybe php, AppleScript or Java} and use that. Export Excel to CSV {gag} or XML, then load that into Python and process as needed, then write out CSV {gag} or XML.
AppleScript is a scripting language for GUI applications, and also useful for processing events. If you're not doing that sort of stuff, then there can be other choices, and other choices can often have extensive frameworks and libraries for common tasks.
Sooner or later, most everybody runs into a wall when using a spreadsheet... Various folks have encountered those limits and have migrated from spreadsheets to FileMaker databases, and now use a database as the central store for their operations — and that's the other issue that can arise with spreadsheets... Where's the canonical data?

Macro to remove duplicate rows between two worksheets

Hi
We have a master file which multiple users access through 'sharepoint'.
The 'sharepoint' service had an issue, and this master file (which two users spend a day each working on) has not updated.
We are left with two variations of the same master file, and need to merge them together - allowing adjustments made by both users to stand. The master has 45 columns, and the copies have between 20916 and 21034 rows inc header.
As I have basic capabilities with Macro's, would someone be able to advise?
Kind regards
Metakio

Re: Merging two files
One way...
In a new workbook, paste copies of the two sets of data onto a single sheet with one set of data directly below the other.
Use Excel's Remove Duplicates feature to remove the duplicate rows.
Jim Cone
Portland, Oregon USA
free & commercial excel programs
https://jumpshare.com/b/O5FC6LaBQ6U3UPXjOmX2

Can I create a wireless link between two 871W routers?

Hi all,
The subject says it all. Can I link two 871W routers (ADVIPSERVICES IOS) wirelessly, in either a bridged or routed configuration?
I'm running 12.4(11)T1, and the only station-role they seem to support is root:
r1(config-if)#station-role ?
root Root access point
Any help most gratefully received!
many thanks,
alec

No. With 871W routers you cannot create a Bridge link. 871W routers support the following roles.
a) Root access point
b) Universal client mode
c) Support of Workgroup bridge clients
For information on the roles supported on the ISRs read, http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_chapter09186a008067e8e9.html#wp1101651

Link Between two worksheets in Discoverer

Similar Messages

Maybe you are looking for