Link broken Canadian ISBN - Any Canadian got same problem?

Hi,
Any Canadian trying to get ISBN number. I went to the following link in Library and Archives Canada:
http://www.nlc-bnc.ca/isn/041011-1020-e.html
Where I got the following link to apply for ISBN, but I get broken link:
http://publications.gc.ca/control/applyISBN?lang=English&s=new
Anybody got the same issue? Or is there another link?
Thanks,
Eric

This is far as I could get with the broken link: http://publications.gc.ca/site/eng/importantNotices.html
Good luck. I am not Canadian, but I am sure many on here are and will benefit from what you find. Keep us posted.
- Fabe

Similar Messages

Does any one have same problem that can't text on iPhone 4 but can ring ?

Hi there does any one have same problem just brought iPhone 4
And I put SIM card in and finally get service but I can ring people
But can't text as well been told to reboot phone through iTunes
To make it back to a new iPhone settings been told by Vodafone
To do it, but will it work?

RCC0040 wrote:
Hi,
Today I tried to send a normal text message to 2 non iPhones today having sent messages successfully to these 2 phones on nye but neither would send.
So far today I have tried:
1. Calling, receiving calls and receiving texts from these phones works fine, even today
2. Checking the send/ receive has my number in both sections. I have also tried a variety of setting combinations here of imessage on off etc
3. The same with the phone section and my number
4. Installed latest IOS update
5. Restored network settings
6. Turned off and on again
7. Taken sim card out and cleaned it
I would be very grateful of any further suggestions because I'm not sure at all why this isn't working today after not having knowingly changed anything since nye.
Thank you!
Ask your cell phone provider SMS is a carrier feature.

Since upgrade to ios7 music played thru my Bose has been to say the least hazy it's fine thru phone but the pad has the problem has anyone else got same problem ?

Since upgrade to iOS 7 playing my music from iPad via Bose has been to say the 'least' hazy,not got same problem with phone,has anyone out there come across same problem

The sound on my iPad was pretty bad for Siri after upgrading to iOS 7. I ended up restoring to factory settings which did the trick, but is a big step, especially if you've lots of content on your iPad.
However it may be worth trying a basic Reset where data remains as is. To do that hold down both the Sleep & Home buttons together until the Apple logo is displayed on screen.
Regards,
Steve

Got same problem | SPLIT

Hello all,
Got same problem here k8mm-v mobo .Wanted to test a card preformance on a faster sys so i swaped out a g force 6300 with a g force 5500 agp which came out of a working win 98 retro gaming tower id built for obvious reasons.Anyway the tower starts up normally with all fans, hdds,posting beeps with the exception of no display.I know when theres no signal to the moniter when the little light blinks orange and not solid green with experience from cooking g force cards in the past.Im gonnia try clearing the cmos as someone else has suggested and ill get back.

>>Posting Guide<<

Both iPhone 4s and Ipad not updating to 7.0 It keeps saying there is an error. Any others having same problem?

I have tried a hard reset on both of them but it will not let me download them. I have them plugged in and sometimes it starts to download but quits after about 30 seconds

Hence the problem with trying to download something the second it becomes available. You and millions of others are all trying to download it at exactly the same time. Just wait.

TS3988 Since downloading iOS,nothing I do lets me in iCloud,keeps saying not verified.tottaly getting on my nerves I'd never have put iOS on if I'd known it was a headache,anyone got same problem on ipad2

Help,I've downloaded ios6 onto my ipad2,iCloud won't let me in keeps saying password not verified,which is rubbish I'd never have updated it if I knew of the problems,oh and I've lost youtube.has anyone had the same trouble and is it resolved ?

If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
Occam's razor?

How do you change setting in firefox inorder to use the swipe feature to scroll through opened tabs in a window.? I am using synaptics touch pad that supports swipe on windows. Try my procedure in the link pasted below if you have the same problem as me.

this is what i used but it didnt work
http://www.mactipper.com/2009/07/switch-tabs-in-firefox-with-three.html
I recently figured out that I can change setting on firefox so swipe (three finger movement) can be used to change tabs.
Here is the procedure I used > http://www.mactipper.com/2009/07/switch-tabs-in-firefox-with-three.html but it did not work. Go ahead and try it and see if it works for you. Then reply to me thanks

Your previous support postings are listed [https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=larsonite&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 here].
'''Please bookmark that page so that you don't have to ask about this repeatedly.'''

My droid razr m suddenly developed a high pitched buzz while ringing and when callers are speaking. It doesn't buzz while on speaker. Any one have same problem or a solution to it?

My droid razr m has developed a high pitched buzz while ringing and when callers are speaking. It does not buzz when on speaker. Anyone have this problem or a solution to it?

Teakman lets make sure your device is clear as a whistle! There is not a known audio issue with the Droid Razr M so it appears this may be an hardware defect with the device. To make certain that's not an internal issue, I would recommend completing a Hard Reset http://vz.to/1kEchad .
AshleyS_VZW
Follow us on Twitter @VZWSupport

Logic pro 9 keeps crashing. I get a "disc not ejected properly" message among other error messages. I can't even force quit. It makes me do the hard shutdown. Any ideas? Same problem with both external hard drives

Getting lots of crazy error messages pertaining to the external hard drives. This problem is bad. Usually can't run the software very long at all before it crashes. Logic version 9.1.8 running on OS 10.7.5 on a Macbook Pro

Such an error is being reported by OS X (nothing to do with Logic) and indicates that your Mac and your external drives are losing connection for some reason... There are some external drives that will incorrectly 'go to sleep' without reporting it to OS X which then thinks the drives have been unplugged without ejecting, hence the msg.
Also, you could have a flaky physical connection somewhere.. so check ports and cables....
So... to troubleshoot.. try the following...
Save and place a small text file on each of the drives.. Open both text files in textedit.. and keep them open (You can minimize textedit ) Now, see if you still get that problem.. when the files are kept open.
If you do not get this problem.. then the likelohood is it will be the HDs 'going to sleep' without proper reporting to OS X.. so check for a firmware update from the HD's manufacturer.. that will stop this from happening.
If they still disconnect, its more likely it is a physical ports and cable issue.

Ipad mini retina since update to ios8.2 cannont update or install any appscircle just keeps spinning round also updated today to ios8.1 still not sorted problem out done hard reset several times no joy any body else got same issue

ipad mini cant update any apps or install new ones since updated to ios8.02 and now today updated to ios8.1 still cant update apps the circle just keeps spinning round, i have done a hard reset etc no joy, anybody else got same problem.

VPN-User,
Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.
Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those. This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
Thanks for your patience
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I Got a Problem,

Ok i just built a new computer now i've installed XP went to install the Nvidia Nforce2 drivers for motherboard (K7N2 Delta-ILSR) they installed ok, Then i installed my video card drivers (MSI GeForce Fx5900SP-VTD256) upon reboot my computer failed to load it got passed the windows XP loading screen then just hung on a blank screen before it got to the winXP login screen, then restarted.
loaded up again said my windows failed to load up right before blah blah blah so i went into safe mode, where i was greeted with a message saying basic the MSI GeForce Fx5900SP-VTD256 display drivers was the reason behide my computers instability. so i uninstall them restarted my computer and my normal windows mode loaded up perfect, so i install the drivers again and believe it or not got the same problem. so i went into safe mode removed them and restarted, when i got back into normal mode i went to msi website and downloaded the driver for my videocard on there, install them and got same problem. so this time i went into safe mode and removed the Nvidia NForce drivers restarted my computer and believe it or not my computer loaded up in windows normal mode, but when i check my haardware section i also noticed it uninstalled my videocard, so i install my videocard drivers again restarted my computer, computer reloaded and went straight into windows normal mode with my video drivers installed, then i install the nvidia nforce drivers and restarted, guess what. yep my computer failed to load into normal windows mode so i went to safe mode again but this time there was no message waiting for me to say what the problem was so i uninstall my display drivers restarted and came here hope someone understands what i've wrote and can help me if you need anymore info on my system just ask

Well restarts on machines are commonly caused by two things...so again they must be checked first:
PSU has to be powerful enuff to supply the amps/power that the system requires...get something more beefy to power this rig.
Power Supply Guide
Second check your memory to see if it's failing using memtest. If you get any failures after say 10 to 15 passes then you've got a problem. Run it overnight and see what it does...
After that I would look at compatibility of components in the system such as video card or sound card...
Driver combinations are important and certain versions don't play well together...
Good luck on your troubleshooting!
Bonz

Has anyone else had the same problem with SYSMAN password resetting?

I am a Oracle Support Administrator and have posted a SR with Metalink and just wanted to ask the community if they have had any of the same problems.
I am remotely accessing a customers Grid Control via VMWare software and over the past couple of weeks I have been trying to access GC with the Sysman user. The password seems to be either resetting itself or there is a bug in the system. I have checked to see if there is a expiration script running or something similar with no result. It is definitely being altered somehow at the Grid Con end of things. I checked to see if it was resetting in the emon.properties file in the oracle home, this was not the case. So am really stuck.
I have to change the password via SQL+ for it to come back online.
Any ideas or suggestions would be grateful .
Thanks all.

just follow this....
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/repository.htm#sthref807
9.2 Changing the SYSMAN Password
The SYSMAN account is the default super user account used to set up and administer Enterprise Manager. It is also the database account that owns the objects stored in the Oracle Management Repository. From this account, you can set up additional administrator accounts and set up Enterprise Manager for use in your organization.
The SYSMAN account is created automatically in the Management Repository database during the Enterprise Manager installation. You also provide a password for the SYSMAN account during the installation.
See Also:
Oracle Enterprise Manager Grid Control Installation and Basic Configuration for information about installing Enterprise Manager
If you later need to change the SYSMAN database account password, use the following procedure:
Shut down all the Oracle Management Service instances that are associated with the Management Repository.
See Also:
"Controlling the Oracle Management Service"
Change the password of the SYSMAN database account using the following SQL*Plus commands:
SQL>connect sysman/oldpassword;
SQL>alter user sysman identified by newpassword;
For each Management Service associated with the Management Repository, locate the emoms.properties configuration file.
The emoms.properties file can be found in the following directory of the Oracle Application Server Home where the Oracle Management Service is installed and deployed:
IAS_HOME/sysman/config/
Locate the following entries in the emoms.properties file:
oracle.sysman.eml.mntr.emdRepPwd=ece067ffc15edc4f
oracle.sysman.eml.mntr.emdRepPwdEncrypted=TRUE
Enter your new password in the first entry and enter FALSE in the second entry.
For example:
oracle.sysman.eml.mntr.emdRepPwd=new_password
oracle.sysman.eml.mntr.emdRepPwdEncrypted=FALSE
Save and exit the emoms.properties file and restart each Management Service associated with the Management Repository.
In the Grid Control console, click the Targets tab and then click All Targets on the sub tab.
Select the Management Services and Repository target and click Configure. Enterprise Manager displays the Monitoring Configurations page.
Enter the new password in the Repository password field and click OK.
See Also:
"Specifying New Target Monitoring Credentials"
After the Management Service has started, you can check the contents of the emoms.properties file to be sure the password you entered has been encrypted.
For example, the entries should appear as follows:
oracle.sysman.eml.mntr.emdRepPwd=ece067ffc15edc4f
oracle.sysman.eml.mntr.emdRepPwdEncrypted=TRUE

HT1689 Dexter wrap-up podcasts for Season 8 fail to download to my iPad or iPhone. Works on my Mac. Anyone else with same problem?

Any others with same problem?

http://support.apple.com/kb/HT5394
This states that you need to do an smc reset for full powernap functionality. It could be effecting it if it was an older macbook air that you updated to mountain lion?
Ryan

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

Link broken Canadian ISBN - Any Canadian got same problem?

Similar Messages

Maybe you are looking for