Link cocomo with a SIP VOIP-server (Asterisk)

any ideas/suggestions about communicating between cocomo and
a sip server (asterisk based) ?

Hi Leonard,
I was interested in doing something similar, and used Ribbit Flex SDK to make calls directly from my Flash app to a phone. It worked OK (although connecting the call was rather slow), but if the Flash app user did not wear a headset then the person on the phone would have an echo (as the sound from my laptop speakers was being fed back into the mic). This is because the Flash Player does not have Advanced Echo Cancellation built in (Skype, Adobe Connect and others have AEC built in).
If you'd like to vote for AEC to be built into Flash Player, the Adobe Bug is written up here (currently has 161 votes, open over a year but no comment from Adobe). This is a shame, as I think with AEC lots of people could write some killer apps that used the Flash Player.
thanks
Mark

Similar Messages

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Any Idears on how to use my D-Link Router with Print Server on my mac ?

I just got recently a D-Link Router with Print Server.
The Model is a DI-704UP. does anyone know how i can access the printer to my G5 ?
talked to D-Link and Apple and they have no solution.
IMac G5 Mac OS X (10.4.6)

According to this page on the D-Link website about your product, the router includes a print server for Windows and that the software is for Windows only.
However, this page also on D-Link's website does offer you an unsupported solution.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.6)

Loosing contact with voip server

When the screensaver goes active on my phone it seemes to drop the contact with the sip server. When looking on the icons of the phone it seemes to have contact, all the icons that shuld be on the display are ther. I can make calls but don't recive them.
When I have made a call it works to recive calls untill the screensaver goes on again.
Anyone know if there are any solution to this?

According to System Status there have been problems with Connect during last week. Who can tell the effect of....
Incident #2013110601 Resolved
11:09 PM - 11/6/2013
We have resolved the incident affecting the following:
Performance
Adobe Connect - Meeting (NA3, NA4, NA5, NA7, NA10, NA11)
Incident #2013110601 Reported
6:22 AM - 10/26/2013
We are investigating a reported incident affecting the following:
Performance
Adobe Connect - Meeting (NA3, NA4, NA5, NA7, NA10, NA11)

Looking for a SIP VOIP with some free trial credit

Hi...
Looking for a SIP VOIP with some free trial credit
Can anyone suggest any ?
Harry

Hi...
Looking for a SIP VOIP with some free trial credit
Can anyone suggest any ?
Harry

Trying to link SharePoint 2010 Enterprise with SharePoint 2013 Search Server raises error

Hi,
I am currently working for a multinational who has SharePoint 2010 Enterprise Edition installed, 2 WFE SERVERS, 3 APP SERVERS, 1 DB SERVER. They also installed SharePoint 2013 Exterprise recently.
   Microsoft have recently come in and set up the SharePoint 2013 Search Server to crawl content in SharePoint 2010 as the replacement search to SharePoint 2010 Search. So they have gone through process of certificates and permissions
setups I guess. I was told it was working, but recently failed. When I type in the search box on a web site for SharePoint 2010 I get the message:
         The search request was unable to connect to the Search Service.
I checked the Event log and the Critical error (in Task Category:Timer) I get is the notorious:
The Execute method of job definition Microsoft.Office.Server.Search.Administration.CrawlReportJobDefinition (ID fa882704-80d9-415b-9b9d-eae5e9bdefd4) threw an exception. More information is included below.
        The search service is not able to connect to the machine that hosts the administration
        component. Verify that the administration component 'e9172a05-22ec-4904-9508-
        e5431a180c2b' in search application 'Search_Service_Application' is in a good state and
        try again.
I know administration component is the crawler. I am assuming this is permissions.
The SharePoint 2013 Search Server is picking up SharePoint 2010 site collections items fine i.e. The SharePoint 2013 search shows items from 2010 as expected.
On the SharePoint 2010 central admin box the search service enabled and running (checked with powershell). (SharePoint Server Search 14)
The Search Service id: e9172a05-22ec-4904-9508-e5432a180c2b
I also get the message in event log for gatherer on SharePoint 2010 CA and Search Server:
       Could not access the Search database. A generic error occurred while trying to access the database to obtain
       the schema version info.
       Context: Application 'e9172a05-22ec-4904-9508-e5431a180c2b'
Details:
            (0x80040e09)
Is this permissions to delete something from crawler??????
I would appreciate if someone could help on this. I have tried to be as concise as possible.
Thanks.
John.

It was a case that someone had fiddled with the Service App Associations. Hadn't ticked SharePoint 2013 search. Was still point at 2010. Thanks.
The SharePoint 2013 Search works correctly for SharePoint 2010.
Can someone confirm that the Search Service Application on SharePoint 2010 still needs to exist and hence SharePoint Server Search 14 Service still needs to be running? I am guessing it would as you search from 2010 interface not 2013. I am getting a critical
error in the Event Viewer:
CrawlReportJobDefinition (Id <SharePoint 2010 Crawler>)
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component <crawler id> in search application "Search Service Application" is in a good state and try
again.
I think this is related to the fact we have SharePoint 2013 doing the search instead of 2010.
Any ideas?
John.

E61 - SIP/VoIP

I've just bought a Nokia E61 - mainly for its SIP functionality.
I have entered all my SIP settings, and the phone just doesn't register with the SIP server. I can't even see the attempt to register in the server logs.
What makes me wonder is also that I don't get to choose the connection type for the SIP connection (e.g. my wireless LAN) etc.
I called Nokia support and they tell me that they don't support the SIP client. Great. That's what I bought the phone for ...
Has anyone managed to get the SIP client working? I'm using an asterisk server.
Kind Regards,
Christian

Although I have not verified this myself (I have an E60 not an E61) a poster over on my-symbian.com reports that the new firmware (version 3) for the E61 supports STUN. If this is true you should be able to register and use Vonage. Vonage will not let you use your regular VoIP service (the one that goes through their router). You need to get a "softphone" for an addition $10/month. Then your settings will be as follows:
Profile name: Vonage
Service profile: IETF
Default access point: your wireless router (NOTE: you need to specify an access point, it will not ask for one)
Public user name:sip:[email protected]
Use compression: no
Registration: When needed or Always
Use security: no
Proxy server:
Proxy server address: none (leave this blank)
Realm: 216.115.20.41
User name: your softphone number (including the 1)
Password: your softphone password
Allow loose routing: yes
Transport type: UDP
Port: 5060
Registrar server:
Registrar serv. addr.: sip:sphone.vopr.vonage.net
Realm: sphone.vopr.vonage.net (or 216.115.20.41)
User name: your softphone number (including the 1)
Password: your softphone password
Transport type: UDP
Port: 5061 (or 5060)
I was able to use this to register and make 30 second calls but without STUN, I could not maintain the connection.
MarkMessage Edited by mjlaris on 20-Dec-2006
01:56 AM

Ask the Experts: Single Sign-On with Cisco WebEx Meetings Server, Internet Reverse Proxy, and Enterprise License Manager Solutions

With Arun Kumar
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Single Sign-On (SSO) with Cisco WebEx Meetings Server (Cisco WMS), Internet Reverse Proxy (IRP), and Enterprise License Manager (ELM) solutions.
SSO standards such as Security Assertion Markup Language (SAML) 2.0 provide secure mechanisms for passing credentials and related information between different websites that have their own authorization and authentication systems. SSO enables simplified user authentication and management.
IRP provides public access, enabling users to host or attend meetings from the Internet and mobile devices. Although IRP is optional, Cisco encourages its use because it provides a better user experience for your mobile workforce.
Example question topics include:
SSO profiles and SAML 2.0 Identity providers (IdPs) supported in Cisco WMS
Basic configuration of IdPs
Interaction between IdPs and Cisco WMS
Difference between the cloud client implementation and Cisco WMS
Meeting access behavior in a split-horizon network topology with SSO
How to enable public access to Cisco WMS
Cisco WMS ELM operations
Cisco WMS ELM compared to other unified communications ELM or standalone ELM and compatibility/inoperability between them
Arun Kumar is a team lead in the San Jose Conferencing Technical Assistance Center. He has over eight years of experience in conferencing technology and specializes in Cisco Unified Meeting Place Express and Cisco WebEx Meeting Server. He joined Cisco in 2010 as an escalation engineer for the Cisco Telepresence group. Before joining Cisco he worked for the UK's third-largest internet service provider Supanet on VoIP technology and the *Nix domain. Kumar holds a master of science degree in computer science from Sikkim Manipal University in India, and he holds CCIE (Voice) and VMware Certified Professional certifications.
Remember to use the rating system to let Arun know if you have received an adequate response.
Arun might not be able to answer each question because of the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice, and Video community Other Subjects subcommunity shortly after the event. This event lasts through Monday May 17, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Mobile Service,
CWMS and Jabber integrations:
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_E4CC9599_00_environment-configuration-guide_chapter_01.html#JABW_TK_SF2ED5E1_00
In above link start from section: Set Up Cisco WebEx Meetings Server on Cisco Unified Presence
then move to section: Add Cisco WebEx Meetings Server to a Profile
Once done, move to section: Specify Conferencing Credentials in the Client side. You will see above server already listed there, just go ahead and enter your username and password (pleae make sure this user already exists on your CWMS) and accept any certificate/s if presented. Jabber Integration is done and you can start testing the same.
Attached CWMS - AFDS integration doc.
Please let me know if any furhter question.
Thanks, Arun

BlackBerry SIP VoIP Client / fgmicrotec

We are beta testing our BlackBerry SIP VoIP client und would like to invite everyone to join the trial phase. The registration is quick and simple and can be found here:
http://www.fgmicrotec.com/BlackBerry-VoIP.html
Here are a few facts:
- the client comes preconfigured with a test account on our system
- you can reconfigure the client to use any VoIP provider
- use it with your own SIP capable PBX (i.e Asterisk)
- dial from anywhere (call history, contacts, emails, SMS etc.)
- trial users with good bug reports get commercial license for free
- quick and reliable support via our forum http://www.fgmicrotec.com/forum/index.php

I had the similiar problem and finally I found solution:
www.sipVoipSdk.com

IOS router & SIP proxy server

I am trying to make VoIP call with sip between two IOS router running 12.2(15)T H.323 plus feature. When I try to make call through the SIP proxy server, it fail. The problem is how can I register the prefix my router user agent responsible for to the SIP proxy server. There seem no such command to do so in the IOS document.
When the sip voip call is between the two router directly, it work.

Here is a helpful url with an overview of VoIP and SIPs:
http://www.cisco.com/univercd/cc/td/doc/product/voice/sipsols/biggulp/bgsipsol.htm

AQM Network Recording with off-board recording server

Hello Champs,
Facing issue with network recording with AQM license
I am having an environment with AQM license designed to perform network recording. I have done the following :-
The sync between UCCX and AQM is successfull. Agents are imported to Quality Administrator.Though this was not documented ibm odbc created only in base server and this was after this that the test connection was successful...
The VOIP devices are shown in Quality administrator and are enabled for recording ( network )
Work flow created for both quality management and Archive recording.
The recording location set as a folder in recording server.
On the Call Manager end :-
Cretaed recording profile.
cretated SIP trunk with destination address QM server ( first i tried with Base server IP and then with recording server IP , both not working )
created route pattern 4567 and pointed to SIP trunk.
enabled bib in device page, gave recording profile and automatic recording enabled on line page .
DNA ws showing route this pattern, so there is no issues with CSS partition.
i can login with agent, manager and supervisor accounts to calabrio web page.. BUT THERE ARE NO RECORDINGS HAPPENING..
Kindly help me as this has been eating my head for many days now and have very limited documentation regarding AQM from cisco.

Sorry Saeed.. i didnt get you .. it would be very kind of you if you can elaborate your point please...

CME with Microsoft Lync/Mediation server Integration

Hello
please, we want to integrate our Cisco CME with microsoft Lyn/Mediation Server.
Please, what do i need to configure on the Cisco CME?
Thanks

I have config on cme side. But not Lync side(
sip-ua
no remote-party-id
voice service voip
allow-connections sip to sip
no supplementary-service sip handle-replaces
sip
bind control source-interface gi0/0 (this should be your sip interface, creating loopback and binding to SIP is best practice)
bind media source-interface gi0/0 (this should be your sip interface, creating loopback and binding to SIP is best practice)
voice class codec 20
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
dial-peer voice 11 voip (Incoming dial-peer from Lync)
b2bua
session protocol sipv2
session target ipv4:LyncIP
session transport tcp
incoming called-number .%
voice-class codec 20
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 21 voip (outgoing dial-peer to Lync)
destination-pattern 1... (this is Lync patterns dial-peer)
notify redirect ip2pots
session protocol sipv2
session target ipv4:LyncIP
session transport tcp
voice-class codec 20
dtmf-relay rtp-nte
fax rate disable
fax protocol pass-through g711ulaw
no vad

E70 - conecting with WLAN for voip/internet calls

Hello,
I have nokia e70 and i'm trying to connect to sip proxy server but i can't
The reason is that i cannot connect to WLAN by making voip/internet call.
I can connect to WLAN when I run browser or getting emails.
Is there way to connect my phone to WLAN without running browser or email client, and make e70 used this connection for voip calls ?
maybe this is a bug, my software version is :
1.0610.05.07
30-05-06
RM-10
Did someone successfully get voip calls with WLAN on this software version ?
Please HELP !
Best Regards
Slawomir Swider

First make sure your 'Default access point' is configured under your SIP profile. Second, make sure your Intenet Tel. Profile is assigned to using your SIP profile.
You can manually register your SIP service by going to 'Menu -> Connectivity -> Internet Tel. -> Registration Status' and change its status. It will connect to your WLAN automatically and register. It can take a whole minute depending on your connection, so be patient.
You don't need to manually register when just making calls; punch in the desired number then 'Option -> Call -> Internet Call.' It'll prompt you to 'Register now' if you haven't.

Create a site collection with dedicated content db with the help of server object model

Hi,
I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will create a content db and then create the sitecollection with contentdb
parameter with the created contentdb name.
Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
1) create a web template and include sp doclibs, splists , site columns in this.
2) i am thinking of a ui design to create the below:
These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects" aka
"site collections" and uploads the documents into these projects and collaborate.
so my question is : On click of a button can I create a site collection with a dedicated content db based on the web template created with the hel of server object model?
The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in server obj.model ?
passing a paramter from code behind- visual web part ui to power shell ?
and it should create the site collec based on the web template and create the content db.
my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

Try below:
http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
# Enable the remote site collection creation for on-prem in web application level
# If this is not done, unknon object exception is raised by the CSOM code
$WebApplicationUrl = http://dev.contoso.com
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null)
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
$webapp=Get-SPWebApplication $WebApplicationUrl
$newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
$newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
$newProxyLibrary.SupportAppAuthentication = $true
$webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
$webapp.Update()
Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
# Reset the memory of the web application
Write-Host "IISReset..."
Restart-Service W3SVC,WAS -force
Write-Host "IISReset complete."
If this helped you resolve your issue, please mark it Answered

OSX 10.9 compatibility with Windows Small Business Server 2011?

Hi
I'm hoping someone here may be able to help me as our external server guys have been particularly unhelpful!
I'm the only Mac on a Windows server, which has recently been upgraded (??) to Windows Small Business Server 2011. I've recenty upgraded the work iMac to 10.9, but ever since the server change, I'm having intermittent dificulties saving files. Often, I get and error saying the file cannot be saved as I don't have permission to access the folder - which then worryingly REMOVES the file I'm trying to overwrite WITHOUT WARNING.
If I'm using Photoshop save for web, I get errors when clicking 'Save' to say that it can't, but does save the file, plus a second with a gibberish file name.
Most worryingly though, is that now on two occasions caused the iMac to crash and shutdown immediately, which is not good at all. Once was moving a file to overwrite another in the Finder, the second (today) was saving from Illustrator.
I'd noticed weird things with our old 2003 server before the switch and when I was still on 10.6 - mainly that my iMac was slow when connected (Adobe apps etc opened in a flash when unconnected, but took minutes when plugged in), but now I'm on 10.9 and the new server installed, these saving issues have arisen. (I ended up wiping the Mac and completely reinstalling everything to cure that slowness issue - never did find out what it was!).
The server guys are adamant that this has nothing to do with the server, and is all linked to my iMac - personally I'm not so sure, but I'm asking here to see if anyone else has had issues? It seems like some kind of permission problem? Do I need any special network settings for it to play nicely with the Windows server? My internet, email all goes through it, and I use it to store my work, but I'm not linked to any other server software in any way.
If anyone may have any clues to help I'd be really grateful!
Many thanks!
Ben

Thanks for the response - this is why I'm asking though- I can't see anything on the iMac which would be causing this, and saving files to a folder on a server is a pretty basic fuction, and I can't risk the crashes. I don't see how the iMac connection would be causing this, or for the files to 'vanish' but if it is the iMac settings I'll need to find a fix. Every one else is okay, but I'm the only one using this software and filetypes. Surely the Windows software would have some kind of instructions for connecting Macs?
I was hoping someone may have experience and if any additional network settings might be needed. I will check with Apple support also to see if they have any info, but thought I may get a good response here.
What I meant by the "server guys" is that's it's an external company we pay to look after it - so I'd hoped they might have at least looked into it for me, but it's a brick wall "We don't support Macs" response... which is why I think it's unhelpful - even though they supplied the software knowing it needs to have multiplatform support...
It's really frustrating.
And I hope nobody does insist I use Windows... please... I'd have to leave....
EDIT - "We"?? - Do you work for them!?

Link cocomo with a SIP VOIP-server (Asterisk)

Similar Messages

Maybe you are looking for