Link Display is not coming proper.
Hi All,
I am Creating a link and where I have to display "Please click here to fetch Category ". But the problem I am facing is the message is not comming in one line rather it is coming wrapping the whole message. I need to do No wrap of that link so that whole message come in same line.
Please let me know how to do this ?
Thanks
Debashree
Hi Tapas,
I have tried the row layout but I am facing same issue.
Let me give you the structure.
I have one cellformat. Under that I have labeledfieldlayout. Under that i have different item. There i have created a rowlayout region and under that i have created a cellformat and there i created the link. For this cell i have used width 100% colspan 10. then also it is not working. Please let me know how to do that?.
Thanks
Debashree
Similar Messages
-
Excel alligment is not coming proper
Hi guru
My requirement is convert spool to excel format .
i am using 'RSPO_RETURN_ABAP_SPOOLJOB' and 'SO_RAW_TO_RTF' function module and after that i loop the internal table value in one string . my problem is that excel alignment is not coming proper and all are coming in one cell . please help me i need to finish this requirement
<< Priority normalized >>
Edited by: Rob Burbank on Jan 10, 2012 12:21 PMmy code is this please provide me exact solution
CALL FUNCTION 'RSPO_RETURN_ABAP_SPOOLJOB'
EXPORTING
rqident = gd_spool_nr "Spool Request Number
first_line = 1
TABLES
buffer = it_spool_xls "Internal table that will have the Spool Request No data
EXCEPTIONS
no_such_job = 1
not_abap_list = 2
job_contains_no_data = 3
selection_empty = 4
no_permission = 5
can_not_access = 6
read_error = 7
OTHERS = 8.
LOOP AT it_xls_spool.
CONCATENATE xls_string it_xls_spool INTO xls_string. "xls_string will have the data as one string
ENDLOOP.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = xls_string "String of String data type
=_ =
IMPORTING
buffer = xls_str "String of XString data type
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
message 'converted not in excel' type 'E' .
ENDIF.
pdf_content = cl_document_bcs=>xstring_to_solix( xls_str ).
but data is not coming with proper alligment please suggest me where i need to change the code. -
Date format not coming proper after formula
Hi All,
I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
Goods Issue Date is 21.06.2006
Goods Return Date is 22.08.2006
According to formula No. of days elapsed shud be 62
but it is coming as 04.03.0001.
Please help as it is a urgent requirement.
Much Appreciated,
Sunil Morwal.HI,
Change the data type to number and try it out.
i think i will solve your problem.
Cheers,
viren. -
Hierachichal display is not coming for field in cross tab crystal report
Hi,
I have a dimension "Cost center" in DSO on which Hierarchy is defined in SAP BI.
When I developed one cross tab report on this DSO, values for Cost Center fields are displayed in flat mode and not in Hierarchical mode.
I also set group option on this "Cost center" field in report And in Report menu "Hierarchical Grouping option" also check box ticked for "Sort data hierarchically" and also selected Instance id field.
how to get this?
**Note: same problem when report is developed on Infocube.*+
Please help me.
Thanks,
Dhana.Hi Dhana,
I've created a similar report to show matrix WBS x RBS, and WBS are grouped hierarchically.
My report developed in this way:
- I've created Hierarchical group located in detail section of report. In detail section I've put the row field of cross table.
- I've suppress all this section: group header, group footer and detail
- I've created the cross table in Report Footer
The report show correctly
Regards
Sandro -
Output form is not coming proper.
Hi,
I am using call function CONVERT_OTFSPOOLJOB_2_PDF to convert OTF spool number to PDF file.
When I gone to tcode SP01 and checked out the output of same spool number then found out the proper output .
But when I run my program using above function module to convert the spool number to PDF file then in PDF file some chanracters coming in chaniese.
So what is the proper solution for the same.
Thanks in advance.
Regards,
VikramTry standard program RSTXPDFT4 to convert spool to PDF. Just give the spool request no and it will be converted to PDF. If this program converts the spool correctly then problem is with ur customized program.
anya -
My imac 27" 2013 model just stop displaying,lets not coming on
when i press the power bottun i feel its on but the screen does'nt indicate any thing
I would try a Safe Boot OS X: What is Safe Boot, Safe Mode? - Apple Support be paitient it takes longer. When its booted up you can just restart normally.
Forcing shutdowns can cause disk corruption. Even though EtreCheck doesn't report any disk errors I would run Disk Utility from your recovery partition (Command-R restart) and repair the startup disk and repair permissions.
I also recommend removing the BlackBerry software, it's been known to cause problems. -
Date not coming in proper format after applying formula in Update Rules
Hi All,
I have two time characteristics "Goods Issue date" and "Goods Return date" and One key figure "No. of days elapsed".
The key figure "number of days elapsed" is being calculated by taking difference of "goods issue date" from "goods return date", but the format for that is not coming proper for example:-
Goods Issue Date is 21.06.2006
Goods Return Date is 22.08.2006
According to formula No. of days elapsed shud be 62
but it is coming as 04.03.0001.
Please help as it is a urgent requirement.
Much Appreciated,
Sunil Morwal.Dear Sunil,
Kindly check if creating 2 new KeyFigures (DATE) will be of help by assigning the said "two time characteristics" values.
From these 2 new KYFs, apply your formula..
Hope this helps..
Thanks.
Message was edited by: Arnold Padiernos -
HT5624 Verification e-mail from apple not coming to my in box
Verification link e-mail not coming to my inbox
"Email messages that are sent to your @facebook.com email address will be forwarded to the primary email on your Facebook account."
https://www.facebook.com/help/224049364288051 -
Urls are not coming in as links in sent emails; certain websites are not displaying correctly
When I send an email with a url/link, it does not come in to the recipient as a link.
Went to a website (bjs.com), which was not displaying images and had no functionality.
These things worked in IE8 so it's a Firefox problem.That is probably Hotspot Shield.
Do a malware check with some malware scanning programs on the Windows computer.<br>
Please scan with all programs because each program detects different malware.<br>
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Header is not coming in alv list display- urgent
hi all,
i am sending my code below....
my requirement is in selection screen i have 4 radio buttons . if i click 1 radio button it will duiisplay data and and its header. report is working fine. my requirement id when i click r_mssng radio button(missing radio button) it is showing data correctsly. here i want to show header as 'Missing details report'.
this is not coming in my report. anybody can suggest me.
i am sending my code below....
report zvra0001ftb13 message-id zv.
Confidential and Proprietary
* Celestica Corporation
* All Rights Reserved
*ABAP Name: ZVRA0001FTB13
*Created by: Srinivasa Chakravarthi
*Created on: 26/03/2003
*SAP Version: 4.6 C
*Description: This report displays details of foreign trades
and EHS based on the deliveries made to the outside
countries.
*Input: Selection Screen Criteria includes country of
origin,Company code, Sales Organisation,
Ship-to-party, Sold-to-paarty, Goods movement date,
Invoice number, Invoice type, Material , Material
Type, Exporter ID, Province of origin.
*Output: ALV output that contains Mode of Transport, Export
HS number, Commodity Description, Quantity, UOM,
Value, Country of Destination, Goods Origin
*Dependency: Nil
*Modification Log:
*CR# Date Coded Transport Description
*====== ======== ========= ============= ===============================
*5147 26/03/2003 Srinivas ED1K922286 New Development
*8700 02/11/2004 H.Arular ED1K938380 To check if entries of Comm
Code(HS code)is less than 8
digits and give a warning
message.
*18684 25/07/2007 MAHEEDHAR Merge the logic from report
ZVRA0001FTB13_ERROR into
report ZVRA0001FTB13 and
added two radio buttons
called missing data and non
missing data, addedc logic
accoriding to the radio
buttons.
*Declaring Tables.
tables: likp, "Delivery document Header
lips, "Delivery Document Item
vbfa, "Sales document Flow
bkpf, "Accounting Document Header
eikp, "Foreign Trade:Export/Import Data
eipo, "Foreign Trade:Export/ Import
"Header data
t618t, "Forein Trade:Mode of Transport
"Description
t604t, "Foreign Trade: Commodity Code/
"Import Code number Description.
mara, "Material master data.
t005, "Countries
t001, "Company Codes
tvko, "Sales Organisations
kna1, "Customer Master
t003, "Document types
t134, "Material types
tvfk,
konv,
vbrk.
constants : c_rep like vbrk-fkart value 'YGFB',
c_for(10) value 'Foreign'.
*Decalre Type pool for ALV
type-pools: slis.
*Type declaration for LIKP.
types: begin of t_data1,
vbeln like likp-vbeln, "Delivery
kunnr like likp-kunnr,
end of t_data1.
*Type declaration for LIPS,VBFA.
types: begin of t_data2,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
vbelv like vbfa-vbelv, "Preceding SD document
posnv like vbfa-posnv, "Preceding item of SD document
matnr like lips-matnr, "Material Number
meins like lips-meins, "Base unit of measure
lfimg like lips-lfimg, "Actual Quantity Delivered
mtart like mara-mtart,
end of t_data2.
**Type declaration for BKPF.
*types: begin of t_data3,
belnr like bkpf-belnr, "Accounting Documnet number
bukrs like bkpf-bukrs, "Company Code
end of t_data3.
*Type declaration for BKPF.
types: begin of t_data3,
vbeln like vbrk-belnr, " Billing Doc
fkart like vbrk-fkart,
land1 like vbrk-land1,
end of t_data3.
*Type declaration for EIPO.
types: begin of t_data4,
vbeln like lips-vbeln, "Delivery
posnr like lips-posnr, "Delivery Item
matnr like vbrp-matnr,
fkimg like vbrp-fkimg,
meins like vbrp-meins,
verld like eipo-verld, "Country of dispatch for Foreign
"trade
herkl like eipo-herkl, "Country of origin of material
grwrt like eipo-grwrt, "Statistical value for Foreign
" trade
stawn like eipo-stawn, "Commodity code for foreign trade
expvz like eikp-expvz, "Mode of transport for foreign
"trade
end of t_data4.
*Type declaration for T618T.
types: begin of t_data5,
land1 like t618t-land1, "Country key
expvz like t618t-expvz, "Mode of Transport
bezei like t618t-bezei, "Description
end of t_data5.
*Type declaration for T604T.
types: begin of t_data6,
land1 like t604t-land1, "Country key
stawn like t604t-stawn, "Commodity Code
text1 like t604t-text1, "Description
end of t_data6.
*Type declaration for T604T.
types: begin of t_mara,
matnr like mara-matnr,
end of t_mara.
types : begin of rep_val,
vbelv like vbfa-vbelv,
posnv like vbfa-posnv,
vbeln like vbfa-vbeln,
posnn like vbfa-posnn,
uepos like vbap-uepos,
posnr like vbap-posnr,
netwr like vbap-netwr,
end of rep_val.
types : begin of t_price,
vbeln like vbak-vbeln,
posnr like vbap-posnr,
knumv like konv-knumv,
kposn like konv-kposn,
kbetr like konv-kbetr,
kpein like konv-kpein,
end of t_price.
data : t_sord type rep_val occurs 0 with header line.
data : t_dord type rep_val occurs 0 with header line.
data : t_rord type rep_val occurs 0 with header line.
data : t_hord type rep_val occurs 0 with header line.
data : t_ford type rep_val occurs 0 with header line.
data : i_price type t_price occurs 0 with header line.
data : i_price1 type t_price occurs 0 with header line.
data : i_mara type t_mara occurs 0 with header line.
data : i_sort type slis_t_sortinfo_alv.
DATA: t_layout TYPE slis_layout_alv.
*Declaring Selection screen.
selection-screen begin of block b1 with frame title text-101.
select-options:
s_verld for eipo-verld, "Country of Dest.
s_bukrs for bkpf-bukrs, "Company code
s_vkorg for likp-vkorg, "Sales Organisation
s_kunnr for likp-kunnr, "Ship-to-Party
s_kunag for likp-kunag, "Sold-to-party
s_wadat for likp-wadat_ist, "Goods Movement date
s_belnr for vbrk-vbeln, "Invoice number
s_blart for vbrk-fkart. "Invoice type.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-101.
select-options:
s_matnr for mara-matnr, "Material
s_mtart for mara-mtart. "Material Type
selection-screen end of block b2.
selection-screen begin of block b3 with frame title text-101.
parameters:
p_export(30) type c default '1366770724RM' obligatory , "Exporter ID
p_provi(30) type c default 'ONTARIO' obligatory ,
p_sumid(30) type c default 'SUM0704'.
"Province of Origin
selection-screen end of block b3.
selection-screen begin of block b4 with frame title text-104.
parameters:
r_summ radiobutton group zsum,
r_dets radiobutton group zsum,
r_mssng radiobutton group zsum, " maheedhar
R_NMSNG RADIOBUTTON GROUP ZSUM. " MAHEEDHAR
selection-screen skip.
parameter : p_sum as checkbox .
selection-screen end of block b4.
selection-screen begin of block b5 with frame title text-105.
select-options : s_i_kun for likp-kunnr.
selection-screen end of block b5.
*Data Declaration
data: i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv .
data: v_lin type i.
data: v_lfstk type c value 'C'.
data: v_vbtyp type c value 'U'.
data: i_data1 type t_data1 occurs 0 with header line.
data : begin of t_T005t occurs 0.
include structure t005t.
data : end of t_t005t.
data: i_data2 type t_data2 occurs 0 with header line.
data: t_delv type t_data2 occurs 0 with header line.
data: t_bild type t_data2 occurs 0 with header line.
data: i_data3 type t_data3 occurs 0 with header line.
data: i_data4 type t_data4 occurs 0 with header line.
data: i_data5 type t_data5 occurs 0 with header line.
data: i_data6 type t_data6 occurs 0 with header line.
*Declare Internal table for ALV output.
data: begin of i_output occurs 0,
belnr like vbrk-vbeln,
posnr like vbrp-posnr,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
strlen, "ED1K938380
end of i_output.
maheedhar-start.
data : i_output1 like i_output occurs 0 with header line,
i_output2 like i_output occurs 0 with header line.
maheedhar-end
data : buff_out like i_output occurs 0 with header line.
data: begin of t_outsum occurs 0,
bezei like t618t-bezei,
stawn like eipo-stawn,
text1 like t604t-text1,
quantity type p decimals 2,
meins like lips-meins,
value type p decimals 2,
verld like t_t005t-landx,
herkl like t_t005t-landx,
end of t_outsum.
data : v_ans.
data : variante LIKE disvariant.
data : v_repid LIKE sy-repid.
data : wa_listheader TYPE slis_listheader.
data : t_listheader TYPE slis_t_listheader.
data : b_text(250).
data: evntS type slis_t_event with header line. " MAHEEDHAR
EVENT AT SELECTION-SCREEN
at selection-screen.
*For Autorisation check
perform authorisation_check.
Validation of Selection screen
perform check_entry.
EVENT START-OF-SELECTION
start-of-selection.
*Get data
perform select_data.
**For calling ALV function modules
MAHEEDHAR - START
if r_mssng eq 'X'.
DELETE I_OUTPUT WHERE BEZEI NE SPACE AND
STAWN NE SPACE AND
HERKL NE SPACE AND
VERLD NE SPACE.
DESCRIBE TABLE I_OUTPUT LINES V_LIN.
IF V_LIN > 0.
PERFORM DISPLAY_OUTPUT.
ELSE.
MESSAGE E000 WITH TEXT-130.
ENDIF.
elseif R_SUMM eq 'X' OR R_DETS EQ 'X'. "ENDIF. " MAHEEDHAR
MAHEEDHAR-END
describe table i_output lines v_lin.
if v_lin > 0.
buff_out[] = i_output[].
Begin of ED1K938380
delete buff_out where stawn ne space or "ED1K938380
verld eq space or
herkl eq space.
delete buff_out where strlen ne 'X' or
verld eq space or
herkl eq space.
End of ED1K938380
describe table buff_out lines v_lin.
Lines with no commodity code exists.
if v_lin gt 0.
concatenate text-902 text-903 into b_text.
concatenate text-906 text-907 into b_text. "ED1K938380
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TITLEBAR = Text-901
TEXT_QUESTION = b_text
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'
DEFAULT_BUTTON = '2'
IMPORTING
ANSWER = v_ans.
if v_ans eq '1'.
perform display_output.
endif.
else.
perform display_output.
endif.
else. " MAHEEDHAR
message e000 with text-130.
endif.
MAHEEDHAR-START
*"-- If non missing details radiobutton is selected
elseif r_nmsng = 'X'.
*"-- move data from i_output to i_output1.
i_output1[] = i_output[].
sort i_output by belnr.
sort i_output1 by belnr.
*"-- to get missing data
delete i_output1 where bezei ne space and
stawn ne space and
herkl ne space and
verld ne space.
loop at i_output.
*"-- compare two int tables with respective document number
read table i_output1 with key belnr = i_output-belnr.
if sy-subrc ne 0.
move-corresponding i_output to i_output2.
append i_output2.
clear i_output2.
endif.
endloop.
describe table i_output2 lines v_lin.
if v_lin gt 0.
perform display_output.
else.
message e000 with text-130.
endif.
MAHEEDHAR-END.
ENDIF. " MAHEEDHAR
FORM SELECT_DATA *
form select_data.
Data:l_strlen type i. "ED1K938380
*Get details from LIKP.
if s_i_kun[] is initial.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' .
else.
select likpvbeln likpkunnr
into corresponding fields of table i_data1
from likp
inner join vbuk on likpvbeln = vbukvbeln
where
( ( likp~vkorg in s_vkorg and
likp~kunnr in s_kunnr and
likp~kunag in s_kunag and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' )
or
likp~kunnr in s_i_kun and
likp~wadat_ist in s_wadat and
vbuk~wbstk = 'C' ) .
endif.
if sy-subrc ne 0.
message e000 with text-200.
endif.
*Get details from table LIPS
select lips~vbeln
lips~posnr
vbfa~vbeln
vbfa~posnn
lips~matnr
lips~meins
lips~lfimg
mara~mtart
from lips
inner join vbfa on vbfavbelv = lipsvbeln
and vbfaposnv = lipsposnr
inner join mara on maramatnr = lipsmatnr
into table i_data2
for all entries in i_data1
where
lips~vbeln = i_data1-vbeln and
lips~matnr in s_matnr and
vbfa~vbeln in s_belnr and
mara~mtart in s_mtart and
vbfa~vbtyp_n = 'U'.
if sy-subrc ne 0.
message e000 with text-201.
endif.
t_delv[] = i_data2[].
t_bild[] = i_data2[].
sort t_delv by vbeln.
delete adjacent duplicates from t_delv comparing vbeln.
sort t_bild by vbeln ascending vbelv descending.
delete adjacent duplicates from t_bild comparing vbeln.
*Get details of Accounting document number
select vbeln fkart land1 from vbrk
into table i_data3
for all entries in t_bild
where vbeln = t_bild-vbelv and
bukrs in s_bukrs and
fkart in s_blart and
vkorg in s_vkorg and " MAHEEDHAR
land1 in s_verld. " MAHEEDHAR
sort i_data3.
*Get details from EIPO.
select vbrp~vbeln
vbrp~posnr
vbrp~matnr
vbrp~fkimg
vbrp~meins
eipo~verld
eipo~herkl
eipo~grwrt
eipo~stawn
eikp~expvz
from eikp
inner join vbrp on vbrp~vbeln = eikp~refnr
inner join eipo on eikp~exnum = eipo~exnum
and eipo~expos = vbrp~posnr
into table i_data4 for all entries in i_data3
where vbrp~vbeln = i_data3-vbeln.
eipo~verld in s_verld.
if sy-subrc ne 0.
message e000 with text-201.
endif.
IF R_MSSNG NE 'X' or r_nmsng = 'X'. " MAHEEDHAR
perform get_price.
ENDIF. " MAHEEDHAR
Get details from T618T.
select land1
expvz
bezei
from t618t
into table i_data5
for all entries in i_data4
where
land1 = 'CA' and " Getting for Canada only
expvz = i_data4-expvz and
spras = sy-langu.
select matnr from mara into table i_mara where matnr in s_matnr
and mtart in s_mtart.
Get details from T604T.
select land1
stawn
text1
from t604t
into table i_data6
for all entries in i_data4
where
land1 = i_data4-VERLD and
stawn = i_data4-stawn and
spras = sy-langu.
select * from T005t into table t_T005t where spras = sy-langu.
loop at i_data3.
loop at i_data4 where vbeln eq i_data3-vbeln.
clear : i_data1, i_data2.
read table i_data2 with key vbelv = i_data4-vbeln
posnv = i_data4-posnr.
read table i_data1 with key vbeln = i_data2-vbeln.
if not s_i_kun[] is initial.
check ( ( i_data1-kunnr in s_i_kun ) or
( i_data3-land1 in s_verld ) ).
else.
check i_data3-land1 in s_verld .
endif.
read table i_mara with key matnr = i_data4-matnr.
if sy-subrc eq 0.
read table i_data5 with key expvz = i_data4-expvz .
land1 = i_data3-land1.
read table i_data6 with key stawn = i_data4-stawn
land1 = i_data4-VERLD.
move i_data4-vbeln to i_output-belnr.
move i_data4-posnr to i_output-posnr.
move i_data5-bezei to i_output-bezei.
move i_data6-text1 to i_output-text1.
Begin of ED1K938380.
l_strlen = strlen( i_data4-stawn ).
if l_strlen < 8.
move 'X' to i_output-strlen.
endif.
End of ED1K938380.
move i_data4-stawn to i_output-stawn.
move i_data4-meins to i_output-meins.
read table t_T005t with key land1 = i_data3-land1.
move t_t005t-landx to i_output-verld.
if p_sum eq space.
if i_data4-herkl ne 'CA'.
i_output-herkl = c_for.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
else.
read table t_T005t with key land1 = i_data4-herkl.
move t_t005t-landx to i_output-herkl.
endif.
move i_data4-fkimg to i_output-quantity.
if i_data3-fkart eq c_rep.
read table t_dord with key vbeln = i_data4-vbeln
posnn = i_data4-posnr.
if sy-subrc eq 0.
read table t_sord with key vbeln = t_dord-vbelv
posnn = t_dord-posnv.
if sy-subrc eq 0.
read table t_hord with key vbeln = t_sord-vbelv
posnr = t_sord-posnv.
if sy-subrc eq 0.
read table t_ford with key vbeln = t_hord-vbeln
posnr = t_hord-uepos.
if sy-subrc eq 0.
read table i_price with key vbeln = t_ford-vbeln
posnr = t_ford-posnr.
if sy-subrc eq 0.
read table i_price1 with key knumv = i_price-knumv
kposn = t_ford-posnr.
if sy-subrc eq 0.
if i_price1-kpein ne 0.
i_output-value =
( i_price1-kbetr / i_price1-kpein ) *
i_data4-fkimg.
endif.
endif.
endif.
endif.
endif.
endif.
endif.
else.
move i_data4-grwrt to i_output-value.
endif.
append i_output.
clear i_output.
clear : i_data5, i_data6.
endif.
endloop.
endloop.
sort i_output by verld herkl bezei stawn.
endform.
FORM DISPLAY_OUTPUT *
This form is to create the ALV output
form display_output.
data: xevents type slis_t_event,
ls_event type slis_alv_event,
slis_ev_top_of_page type slis_formname value 'TOP_OF_PAGE',
slis_ev_end_of_list type slis_formname value 'END_OF_LIST'.
*Call Function 'REUSE_ALV_EVENTS' for top of page
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = xevents
EXCEPTIONS
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table xevents with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move slis_ev_top_of_page to ls_event-form.
append ls_event to xevents.
endif.
read table xevents with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move slis_ev_end_of_list to ls_event-form.
append ls_event to xevents.
endif.
if r_dets ne space.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BELNR'.
l_fieldcat-seltext_m = text-912.
l_fieldcat-seltext_l = text-912.
l_fieldcat-reptext_ddic = text-912.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '12'..
when 'POSNR'.
l_fieldcat-seltext_m = text-913.
l_fieldcat-seltext_l = text-913.
l_fieldcat-reptext_ddic = text-913.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '6'.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
is_layout = t_layout
i_save = 'A'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = i_output
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
else. " MAHEEDHAR
ELSEIF R_SUMM EQ 'X'. " MAHEEDHAR
sort i_output by verld herkl stawn bezei.
loop at i_output.
move-corresponding i_output to t_outsum.
collect t_outsum.
endloop.
*Call Function 'REUSE_ALV_FIELD_CATALOG_MERGE' for position fixing in
*the output.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'T_OUTSUM'
i_inclname = 'ZVRA0001FTB13'
i_bypassing_buffer = 'X'
i_buffer_active = ' '
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
others = 3.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_fieldcat into l_fieldcat.
l_fieldcat-key = ' '.
case l_fieldcat-fieldname.
when 'BEZEI'.
l_fieldcat-seltext_m = text-911.
l_fieldcat-seltext_l = text-911.
l_fieldcat-reptext_ddic = text-911.
l_fieldcat-col_pos = '1'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '15'..
when 'STAWN'.
l_fieldcat-seltext_m = text-111.
l_fieldcat-seltext_l = text-111.
l_fieldcat-reptext_ddic = text-111.
l_fieldcat-col_pos = '2'.
l_fieldcat-just = 'C'.
l_fieldcat-outputlen = '30'.
when 'TEXT1'.
l_fieldcat-seltext_m = text-112.
l_fieldcat-seltext_l = text-112.
l_fieldcat-outputlen = '40'.
l_fieldcat-col_pos = '3'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-112.
when 'QUANTITY'.
l_fieldcat-outputlen = '18'.
l_fieldcat-reptext_ddic = text-113.
l_fieldcat-seltext_m = text-113.
l_fieldcat-col_pos = '4'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-113.
when 'MEINS'.
l_fieldcat-outputlen = '8'.
l_fieldcat-reptext_ddic = text-114.
l_fieldcat-seltext_m = text-114.
l_fieldcat-col_pos = '5'.
l_fieldcat-just = 'C'.
l_fieldcat-seltext_l = text-114.
when 'VALUE'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-115.
l_fieldcat-seltext_l = text-115.
l_fieldcat-col_pos = '6'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-115.
when 'VERLD'.
l_fieldcat-outputlen = '20'.
l_fieldcat-seltext_m = text-116.
l_fieldcat-seltext_l = text-116.
l_fieldcat-col_pos = '7'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-116.
when 'HERKL'.
l_fieldcat-seltext_m = text-117.
l_fieldcat-seltext_l = text-117.
l_fieldcat-outputlen = '30'.
l_fieldcat-col_pos = '8'.
l_fieldcat-just = 'C'.
l_fieldcat-reptext_ddic = text-117.
when others.
l_fieldcat-no_out = 'X'.
endcase.
modify i_fieldcat from l_fieldcat.
endloop.
Call Function 'REUSE_ALV_LIST_DISPLAY' for dispaly of data in ALV.
call function 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZVRA0001FTB13'
it_fieldcat = i_fieldcat
it_events = xevents
i_save = 'A'
is_layout = t_layout
i_default = 'X'
is_variant = variante
i_bypassing_buffer = 'X'
i_buffer_active = ' '
TABLES
t_outtab = t_outsum
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
MAHEEDHAR-START.
*"-- if detail summary checkbox is selected
elseIF R_MSSNG = 'X'.
PERFORM PREPARE_HEADER.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZVRA0001FTB13'
i_internal_tabname = 'I_OUTPUT'
i_inclname = 'ZVRA0001FTB13'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
i_bypassing_buffer = 'X'
i_buffer_active = ' '
changing
ct_fieldcat = i_fieldcat
exceptions
inconsistent_interface = 1
program_error = 2
hi,
*& Report ZALV_FIELD_GRID1
REPORT ZALV_FIELD_GRID1
NO STANDARD PAGE HEADING.
TABLES MARA.
type-pools :slis.
TYPES : BEGIN OF TMARA ,
MATNR LIKE MARA-MATNR,
MEINS LIKE MARA-MEINS,
ERSDA LIKE MARA-ERSDA,
color(4) type c,
SEL type c,
LIGHT TYPE C,
END OF TMARA.
TYPES: BEGIN OF TMAKT,
MATNR LIKE MAKT-MATNR,
MAKTX LIKE MAKT-MAKTX,
MAKTG LIKE MAKT-MAKTG,
SEL TYPE C,
COLOR(4),
END OF TMAKT.
DATA: ITAB TYPE TMARA OCCURS 0 WITH HEADER LINE,
ITAB1 TYPE TMAKT OCCURS 0 WITH HEADER LINE,
wa_fieldcat type slis_fieldcat_alv,
fieldcat type slis_fieldcat_alv occurs 0,
i_layout type slis_layout_alv,
WA_LISTHEADER TYPE SLIS_LISTHEADER ,
i_LISTHEADER TYPE SLIS_LISTHEADER OCCURS 0,
V_EVENTS TYPE SLIS_T_EVENT ,
WA_EVENT TYPE SLIS_ALV_EVENT,
I_TITLE_MARA TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED',
I_TITLE_MAKT TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED',
SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE,
PRINT_CONT type slis_print_alv.
SELECTION SCREE
selection-screen begin of block screen1 with frame title TEXT-001.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN COMMENT /32(35) COMM1.
SELECTION-SCREEN ULINE /27(35).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS MATNR FOR MARA-MATNR.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /30(50) COMM2.
SELECTION-SCREEN ULINE /27(40).
SELECTION-SCREEN SKIP.
SELECT-OPTIONS ERSDA FOR MARA-ERSDA.
SELECTION-SCREEN SKIP.
selection-screen end of block screen1.
INITIALIZATION
INITIALIZATION.
MATNR-low = '23'.
MATNR-high = '1000'.
MATNR-option = 'BT'.
MATNR-sign = 'I'.
APPEND MATNR.
ERSDA-low = '20030124'.
ERSDA-high = '20050302' .
APPEND ERSDA.
PERFORM FILLFIELD.
PERFORM FILLLAYOUT.
PERFORM build_print_params.
PERFORM FILL_SORT.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
comm1 ='SELECT MATERIAL NUMBER RANGE'.
comm2 ='SELECT MATERIAL CREATION DATE'.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM READDATA.
PERFORM POPDATA.
*& Form READDATA
text
FORM READDATA .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-LOW
IMPORTING
OUTPUT = MATNR-LOW.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = MATNR-HIGH
IMPORTING
OUTPUT = MATNR-HIGH.
SELECT MATNR
ERSDA
MEINS
FROM MARA
INTO CORRESPONDING FIELDS OF
TABLE ITAB
WHERE MATNR IN MATNR AND ERSDA IN ERSDA.
LOOP AT ITAB.
data id_color type i VALUE 1.
data id_colors(2) type c.
IF ITAB-MATNR < '000000000000000100'.
ITAB-LIGHT = '1'.
ELSEIF ITAB-MATNR < '000000000000000150' AND ITAB-MATNR >
'000000000000000100' .
ITAB-LIGHT = '2'.
ELSE.
ITAB-LIGHT = '3'.
ENDIF.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab-color.
modify itab.
CLEAR ITAB.
endloop.
ENDFORM. " READDATA
Form FILLFIELD
FORM FILLFIELD .
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
WA_FIELDCAT-outputlen = 20.
WA_FIELDCAT-HOTSPOT = 'X'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
*WA_FIELDCAT-EMPHASIZE = 'C210'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-COL_POS = '2'.
*WA_FIELDCAT-EMPHASIZE = 'C510'.
WA_FIELDCAT-outputlen = 10.
wa_fieldcat-seltext_m = 'UNIT'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'ERSDA'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-outputlen = 15.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
*WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'CREAT DATE'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. "FILLFIELD
Setup print parameters
form build_print_params.
PRINT_CONT-reserve_lines = '3'. "Lines reserved for footer
PRINT_CONT-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
Form POPDATA
FORM POPDATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER-COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOPPAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_MARA
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = V_EVENTS
IT_EVENT_EXIT =
IS_PRINT = PRINT_CONT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " POPDATA
Form TOPPAGE
FORM TOPPAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DETAIL'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "TOPPAGE
Form FILLLAYOUT
FORM FILLLAYOUT .
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-lights_fieldname = 'LIGHT'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
I_LAYOUT-no_totalline = 'X'.
ENDFORM. "FILLLAYOUT
Form FILL_SORT
FORM FILL_SORT .
SORT-DOWN = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'MATNR'.
SORT-tabname = 'MARA'.
APPEND SORT.
ENDFORM. " FILL_SORT
Form EVENT_CALL
FORM EVENT_CALL .
DATA: I_EVENT LIKE V_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " EVENT_CALL
Form POPULATE_EVENT
FORM POPULATE_EVENT .
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
READ TABLE V_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO WA_EVENT.
IF SY-SUBRC = 0.
move 'END_OF_PAGE' to WA_EVENT-FORM.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
endif.
ENDIF.
ENDFORM. "POPULATE_EVENT
FORM END_OF_PAGE.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
ENDFORM.
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CASE RS_SELFIELD-FIELDNAME.
when 'MATNR'.
read table itab with key matnr = RS_SELFIELD-VALUE.
if sy-subrc = 0.
PERFORM DATA_RETRIEVAL_MAKT USING RS_SELFIELD-VALUE.
PERFORM BUILD_FIELDCATLOG_MAKT.
PERFORM FILLLAYOUT_MAKT.
PERFORM DISPLAY_ALV_MAKT.
CLEAR RS_SELFIELD.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
Form DATA_RETRIEVAL_MAKT
FORM DATA_RETRIEVAL_MAKT USING TMATNR .
SELECT MATNR
MAKTX
MAKTG
UP TO 100 ROWS
FROM MAKT
INTO TABLE ITAB1
WHERE SPRAS = 'EN' AND MATNR = TMATNR.
LOOP AT ITAB1.
data id_color type i VALUE 1.
data id_colors(2) type c.
id_color = id_color + 1.
if id_color > 7.
id_color = 1.
endif.
id_colors = id_color.
concatenate 'C' id_colors '10' into itab1-color.
modify itab1.
CLEAR ITAB1.
ENDLOOP.
ENDFORM. "DATA_RETRIEVAL_MAKT
Form FILLLAYOUT_MAKT
FORM FILLLAYOUT_MAKT .
CLEAR I_LAYOUT.
i_layout-zebra = 'X'.
i_layout-info_fieldname = 'COLOR'.
i_layout-box_fieldname = 'SEL'.
I_LAYOUT-EDIT ='X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-window_titlebar = 'EXAMPLE FOR ALV GRID'.
ENDFORM. " LAYOUT_MAKT
Form BUILD_FIELDCATLOG_MAKT
FORM BUILD_FIELDCATLOG_MAKT .
REFRESH FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-KEY = 'X'.
WA_FIELDCAT-COL_POS = '1'.
*WA_FIELDCAT-EDIT_MASK = 'DD.MM.YYYY'.
WA_FIELDCAT-EMPHASIZE = 'C510'.
wa_fieldcat-seltext_m = 'MATERIAL NUMBER'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
WA_FIELDCAT-COL_POS = '2'.
WA_FIELDCAT-EMPHASIZE = 'C710'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
WA_FIELDCAT-FIELDNAME = 'MAKTG'.
WA_FIELDCAT-COL_POS = '3'.
WA_FIELDCAT-EMPHASIZE = 'C210'.
wa_fieldcat-seltext_m = 'MATERIAL DESCRIPTION'.
APPEND WA_FIELDCAT TO FIELDCAT.
clear wa_fieldcat.
ENDFORM. " BUILD_FIELDCATLOG_MAKT
Form DISPLAY_ALV_MAKT
FORM TOP-OF-PAGE.
REFRESH I_LISTHEADER.
DATA: ld_lines type i,
ld_linesc(10) type c,
I_DATE(10) TYPE C,
I_INFO LIKE WA_LISTHEADER-INFO.
WA_LISTHEADER-TYP = 'H'.
WA_LISTHEADER-INFO = 'MATERIAL DESCRIPTION FOR SELECTED NUMBER'.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
WA_LISTHEADER-TYP = 'S'.
WA_LISTHEADER-KEY = 'DATE :'.
CONCATENATE SY-DATUM+6(2) '.'
SY-DATUM+4(2) '.'
SY-DATUM(4) INTO I_DATE.
WA_LISTHEADER-INFO = I_datE.
APPEND WA_LISTHEADER TO I_LISTHEADER.
CLEAR WA_LISTHEADER.
describe table ITAB1 lines ld_lines.
ld_linesc = ld_lines.
concatenate 'TOTAL NUMBER OF RECORD SELECTED: ' ld_linesc
into I_INFO separated by space.
WA_LISTHEADER-TYP = 'A'.
WA_LISTHEADER-INFO = I_INFO.
append WA_LISTHEADER to I_LISTHEADER.
clear: WA_LISTHEADER , I_INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_LISTHEADER
I_LOGO = 'ENJOYSAP_LOGO'.
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM. "TOP-OF-PAGE
*& Form DISPLAY_ALV_MAKT
text
FORM DISPLAY_ALV_MAKT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = I_TITLE_MAKT
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = fieldcat
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_MAKT
Regards
Ashok kumar -
Task not coming as link in UWL
Hi all,
I have configured some of the tasks in my UWL .Now when the workflow is triggered that tasks are coming to my UWL but they are not coming as link. Nothing is happening when I am double clicking on that task. Is this related to configuration that i have done in my UWL? I dont know how to track this. I have checked in SAP Inbox that task is in ready status.
Can anyone help me out in this? It is really urgent.
Thanxs in advance.Same thing is working in my development server but it is not working in test server. Can anyone help me out in this. Tasks are coming in my UWL but no actions are performed on click of that task. This is task which I have added in my XML
</ItemType>
<ItemType name="uwl.task.webflow.TS90100763" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
<ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS90100763" connector="WebFlowConnector"/>
<Actions>
<Action name="launchIView" groupAction="" handler="SAPAppLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
<Properties>
<Property name="SAPIntegrator" value="pcd:portal_content/com.freescale.EP_Portal_Projects/com.freescale.EP_Emp_Portal/com.freescale.qlt_fld_0000/com.freescale.qlt_fld_0002/com.freescale.qlt_pge_0014"/>
<Property name="DynamicParameter" value="wi_id=${item.externalId}"/>
</Properties>
<Descriptions default="DMS : FSAP Task for QA Gate Admin"/>
</Action>
</Actions>
Any help will be appreciated. -
Excise not coming in Display J1IIN
D Friends,
The issue is as follows:
Plant A to Plant B (Same Co. Code). It is a Deemed Export scenario. In SD pricing proced the Excise cond type (JEXP) is maintained as Statistical.
While creating Excise Invoice w.r.t. Commercial Invoice Excise duty comes in BED field. In Export Invoice type I'm selecting Deemed option.
But when I display the Excise Invoice the Excise duty does not come. It is Zero, as shown in the screen shot. In this case pric procd is ZIT02.
However if the scenario is Deemed Export from Plant A to Plant C (different Co. code) Excise invoice is coming in Display mode and therefore it is coming in ARE 3 also. In this case pricing proced is ZIT01, but Excise Cond type is same.
Both the pricing procd are maintained in IMG--> CIN--> Classify Condition type.
I've searched the forum, but could not find solution. Hence pl let me know what I'm missing. I've configured a new scenario from Plant A to Plant B. TAXINN is used here. Plant A to Plant C was already running successfully. Pl help.
Thank you very much folks.Lakshmi,
From next time I will post CIN issues in Internationalization and Unicode.
Now coming to the issue. I've already mentioned in the last line that TAXINN is configured. I've mentioned two scenarions:
1. From Plant A to Plant B and
2. From Plant A to Plant C.
Excise Cond type is same in both the scenarios which is JEXP.
Pri Procedures are different.
In scenario 2 Excise condition is perfectly coming in J1IIN but in Scenario 2 Excise condition comes during creation but vanishes in Display mode of J1IIN. So if it is coming in Scenario 1, then I think it ensures that its FV11 must have been maintained. I can not see due to missing authorization. Pl suggest why Excise condition is not coming in J1IIN in scenario 2.
Thank you. -
MBP C2D -- display not coming on after sleep, hd is spinning, hard reset re
HI,
After using my new Macbook Pro Core 2 Duo 2.33 for a few days, randomly after opening the lid while Macbook has been sleeping the display will not come on, no illumination whatsoever. The hard drive is spinning.
The only recourse I have found so far is to do a hard shutdown by holding the power button.
any known solutions?
MBP C2D 2.33 Mac OS X (10.4.8)No, my laptop is treated like a desktop replacement, so it doesn't move. And no peripherals connected.
Hope Apple has corrected the logic board problem by now, though anything is possible as my Macbook is the first production run of the Core 2 Duo.
Will try booting from install disk and repair permissions. Hopefully this is it. (Migration Utility failed miserably when i tried to copy over my user files from my old Powerbook 800. While it said it was doing the copy of my documents etc., it failed to copy any of them across. Migration Assistant even said it was successful.)
Thank you -
ZBOL entry is not coming in BOL Entity
Hi All,
I have created 1 Z Component in SPRO-> Customer Relationship Management-> CRM Cross-Application Components-> Generic Interaction Layer/Object Layer-> Basic Settings. In the Object table and Model table i have created the entries for the Z BOL. I redefined the methods of the implementation class and tested the Component in genil_bol_browser, it is working fine.
Now i have to link it to Web UI, so i am creating a new view in BSP Component, while creating new view, in Add Model Node step, in BOL Entity my Z BOL entry is not coming.
How it will come over there in the BOL Entity list ?
Thanks & Regards
Raman.HI, ramana,
see this link it will help to you.
[http://wiki.sdn.sap.com/wiki/display/CRM/CreateaZBOLObjectPart1|http://wiki.sdn.sap.com/wiki/display/CRM/CreateaZBOLObjectPart1]
Regards,
sam. -
Custom Resource Renderer not coming on Implementing Flexible UI Components
HI,
I am using the Sneak Preview NW2004s SP9 with TREX .
I have to modify the search result list as returned by the TREX using the default search, basically have to include a custom Link based on the resource name.
I am trying to run the examples from the Knowledge Management and Collaboration Developer's Guide - "How to Implement Flexible UI Components".
I deployed the par file for the sample application "Using Flexible UI Ready-Mades"
and followed the steps as outlined below:
System Administration>System Configuration>Knowledge Management -->Content Management
1) Under
User Interface->Mapping>Resource Renderer
Created a new mapping for the java class com.sap.km.ui.renderer.SimpleResourceRenderer
2) Then under
User Interface->Settings>Resource Renderer Settings
Created a duplicate of SearchResourceRenderer
and in the copy changed the Resource Renderer to the custom one(as the one mapped in previous step).
In the Search Result layout Set, i changed the Resource Renderer Name to the custom one.
Now i restarted the server.(i tried restarting after almost all the steps )
But my resource renderer is not coming after i execute the TREX Search.The list returned seems to use the default Resource Renderer.
I even tried by making an advanced copy of the Search Layout Set, changed the Resource Renderer name, updated the OTH file(search.oth), Switched on the degugging for the WdfProxy and reloaded the OTH.
Now the new layout Set is being used but still i cannot see the result as per the custom resource renderer.
Morover, if i try to print some message from the resource renderer code(Component render method), it is not printed in the default Trace file.
Please help me in identifying and resolving the problem.
Thanks,
SiddharthaHi Detlev,
Sorry for the delay.
We don't want to exlude the folders, we would like keep it, the problem is, instead of appearing the folder name, is displayed the error message and below the actions (details, delete, ).
At first, we thought that could have been an error in the configuration of LayoutSet, but then, we tried on other two environments, with the default LayoutSet configuration and we still get, on the three environments, the same error message.
Any idea?
Thanks and Regards,
John
Maybe you are looking for
-
How do I get my mail account to send email with photos when it keeps saying password wrong?
I have gone into system preferences and retyped it in there, and also gone to my hotmail account via safari and typed it in and it is correct. I'm totally stuck with what to do, help anyone!
-
Can I get a list of all binary files and what they do?
I'm a newbie to Oracle. Needless to say I'm blindly muddling my way through the experiance of installations/setup and managing my first database. I realize that there is a three tier system and for my system all three of the tiers are on the same pc!
-
How the system automatically kills the process when I close the browser?
Hi everybody, I have the following problem: I run a report on the web browser. Suppose the user want to detail on one of the characteristics of report. If this takes long time (there are many records in report) and the user closes the web browser, th
-
BUG: EA 2.1 code editor: completion insight doesn't work in opened files
I just migrated from SQLDEV 1.5.5 to EA 2.1. It's nice that I colud find so many of my suggestions implemented in this new version. THANKX :-) code editor: When I'm working in SQL Worksheet the "completion insight" feature is working well, but when I
-
Hi, In my source file i have a single product name as "a,b". But when i try to upload, it is not happening and throwing error. Please can anyone help me? Thanks, Madhu