Link : DMS to URL

Hi all
Pls send me BBP Document or Functional design document or Technical design document
if possible all above Documents
with configuration settings file with screen shots
to link DMS to URL(i.e. Internet)
Thanks & Regards,
Vinay

Hi Vinay,
please see the information under the following link where you will find an explanation of all the necessary settings for linking URLs to document info records:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/ca-dms-LinkingURLpagestoDocuments
Best regards,
Christoph
P.S.: Please reward points for useful information

Similar Messages

URL LINK -DMS

Dear all,
My requirement was hyperlinking to a original file which is stored in one DIR from another file which is stored in same or another DIR.
MY client requirement is to open of original of nay document thrperlinkough giving hyperlink . he wants all original files of the same or different DIR
Should be open through hyperlink
SAP has been replyed
Not possible through Standard DMS
But i can be possible through URL link to document info record.which point to be a serverwhere the original are stored(i.e. wed server)then file has not to be checked in and path could be same in several info record .setting for adding URL link to document info record.
How to link DIR with URL ? Wht r the setting required ?
kindly help

hi,
go to,-- CV02n, Basic data screen go to SYTEM, click 'Servises for Object. u wil get left hand side GOS, generic object Service tool bar.
Click Create, in that u will be finding, Creat External Document (URL). Click and add URL.
This is stored in your SAP DB
Benakaraja
??P

Linking DMS DIR to Service entry sheet

Hello Experts,
I need to link DMS DIR to Servise entry sheet(ML81N). As there is no standard SAP object(ESSR) I need to achieve this by Development.
I found out the procedure for development as below which I could not understand properly.
Object links to other SAP objects
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130.
Create function module OBJECT_CHECK_XXXX (XXXX = object name)
If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Please explain step by step procedure for achieving this development.
Your help is greatly appreciated.
Regards
Madhu G S
Edited by: Madhu Gs on Dec 21, 2009 8:16 AM

As you above given procedure
Object links to other SAP objects
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130.
Create function module OBJECT_CHECK_XXXX (XXXX = object name)
If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
I created the object link as OBJECT_CHECK_ESSR for service entry sheet but problem is that how it will come in the cross application>document managemnet> define document type> define object link > new entry(in the list) ? .
ie how to attach the new created object link to doc type(DIR) .
Edited by: sgadekar2006 on Feb 24, 2011 4:11 PM
Edited by: sgadekar2006 on Feb 24, 2011 4:12 PM

Image with a Link to an URL

Hi,
I have an easy question. I would like to have a little question mark-image on my view. And this image has an link to an url. So I would like to push this image, and a new browser-window opens.
I only found the Layout-element "LinkToUrl". But with this element I don't have an image.
How does it works in Webdynpro? In HTML it is very easy...

Hi,
Change the layout to grid type and then scroll down. You will find "layout[GridLayout]" set col count here to the number equal to total number of buttons + 2.
Then click on link and in the properties scroll down and set col span = 2.
and hAlign = right.
this will do the required.
and the flowdata is coming in your container's properties because this container is also present in one of the transparent container which is having layout as flow layout.
Regards,
Sarbjeet.

APEX... Link to open URL in a new window

I have one of my interactive reports' column linked to a URL... so when my user click on the link it opens an associated webpage...
How can I make it to open in a new window...
Thanks

Hi,
I am trying to open my page as a popup without refreshing the parent window.
Here is what i have done
1. created a navigation bar entry for help
2. pointed the entry to a page in the application
3. opening the page as a popup with the following code in it.
javascript:window.open('&WORKSPACE_IMAGES.APEX_Reporting_User_Guide.pdf#&P0_PAGE_NAME.','popup1');
my help page opens as a popup, but also refreshes the parent window with a blank screen.
i also tried a few other options
javascript:window.open('&WORKSPACE_IMAGES.APEX_Reporting_User_Guide.pdf#&P0_PAGE_NAME.','popup1');void(0);
javascript:window.open('&WORKSPACE_IMAGES.APEX_Reporting_User_Guide.pdf#&P0_PAGE_NAME.','popup1');return false;
but none of these are helpful
Am I going wrong somewhere?
Thanks
MM

Dispute Case - Linked Objects- Various- URL

Hello,
We have a requirement to create a Dispute Case through a custom interface program. We have been doing this using BAPI_DISPUTE_CREATE.
Now, I need to programmatically link a URL to Dispute Case -> Linked Objects->Various->URL. An custom element type for u2018URLu2019 was configured in the Registry for this in our SAP system.
This is usually achieved programatically using the tables parameter OBJECTS of the BAPI. We have to pass the OBJ TYPE & KEY to this parameter.
Since configuration does not allow the BOR_TYPE to be defined on tab u2018Connection Parametersu2019 of the Element Type URL in the Registry, what OBJTYPE and KEY works for this?
Thanks,
Smitha/Aneel

Hello Andy,
I have a question. We're also trying to use BAPI_DISPUTE_CREATE in order to create dispute cases, but the function needs a unique GUID number in order to create the dispute case. How did you manage to maintain this guid number?
Because of this problem, we started using the function UDM_DC_CREATE, which generates a GUID itself, if you do not maintain one.
Sorry for the inconveince, the problem was because of a wrong attribute, I can create a dispute case with this function without maintaining the guid id.
Edited by: Karabiber Kerem on May 21, 2010 11:03 AM

Link to local url

I want to link to a url that will be local on the CD. I am
using toToNetPage "myUrl", "_new"
but when clicked for the first time if the browser is not
already running I get a blank untitled page or tab. Click it again
and I get the page OK but this will likely be confusing for users.
Anyone come across this or have fix
Thanks

I have seen that before, and I have never found an adequate
solution.
Instead, I have begun using BuddyAPI for this function. You
can use the
command:
baOpenURL(myURL,"normal")
And it works much better and more consistently. You can use
up to 2
functions of BuddyAPI for free. You can download it from
www.mods.com.au/budapi

Insert URL link into SMARTFORMS and retrive the picture linked to the URL

Hi Guys,
I have the following problem:
I have a URL link and I want to set this link into the smartforms and
I want to retrieve the picture linked to the URL and display the picture in the print.
Is it possible?
Thanks for your support.
Best regards,
Giulio

Hi
Check the Tcodes
OAOR and
SMW0
<b>Reward points for useful Answers</b>
Regards
Anji

How i link DMS to FICO say Invoice

Hi,
how i would link DMS to FICO??say Invoice.
points?

HI Rajes
You can select the object links from dc10 tcode. But if you want to add any other object as object link then the following info as posted in some other thread might be useul to you.
Through Abapers,
You can create New objects using the T.code: SE80.
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Thanks
Prasad

Trying to add a lightbox slideshow caption link to a url hosed my site.

In the lightbox slideshow caption I tried to add an html link to the url of the image and now the all the slide show are hosed. It didn't link from the caption text but was embedded into the sllde show so that all the thumbnails linked to the same url.I even created a new slideshow from scratch and it still linked to the url. Do I have to rebuild the whole site? How and where do look to find the hyperlink to remove it?

Please try to select the caption and remove the link from hyperlink dropdown in top bar menu in Muse.
If this is not the case , post screenshots from design view.
Thanks,
Sanjit

I feel like a rookie but, can someone tell me how to create links to external URLs in Muse?

I want to attach the link to text which gives the name of the site. I am not an idiot, just unfamiliar with the program. I have looked through the learning videos but cannot find anything that specifically relates to my question. I appreciate any help I can get. Thank you, in advance, for any assistance.
Sue

I am unable to open the screen shots as I keep getting a message saying that I am not using the correct program. Can you tell me which program I should use? Thank you.
Sue
Date: Mon, 22 Jul 2013 10:48:46 -0700
From: [email protected]
To: [email protected]
Subject: I feel like a rookie but, can someone tell me how to create links to external URLs in Muse?
    Re: I feel like a rookie but, can someone tell me how to create links to external URLs in Muse?
    created by spudsmurphy13 in Help with using Adobe Muse CC - View the full discussion
good question sue, and well done to all for how to do links.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5527823#5527823
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5527823#5527823
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5527823#5527823. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Archive Link and external URL Link

Hi,
we use Archive Link, NO own documents (like CV01N,..). We want to define different document types (oac2) and link them to via url to an external webserver, the user should see the doc in the normal attachment list.
Doc Typ    url
DOC1        http://www.xsfd.wer/show?...
DOC2        http://www.ssdfs.ver/show?
In oac0 (definition content rep) there is an subtyp called "URL", looks like it could be this kind of rep? All solutions and hints I found where based on DMS/KPRO not ArchiveLink. I don't want to use link to external Document via GOS.
Regards,
Christian

Dear all,
no, I found no solution to access automatically! And I was not able to find a definition of the "URL" Repository.
Best regards,
christian

IR Report "Link" Attibute Custom URL Escape : (colon) Character

<h2>I am running Apex 4.0.2 and have an interactive report page 242 with a result set.</h2>
Scenario
In the "Report Attributes" "Link" settings I want to link the report to a 'Custom URL' target to take the user from this IR Report Page 242 to page 243 to a 'Single Record Data Entry Form'
I am setting the value of the custom url target as:
f?p=&APP_ID.:243:&SESSION.::&DEBUG.:243:P243_NAME,P243_DESCRIPTION,P243_LOCATION:#SOURCE_NAME#,#DESCRIPTION#,#LOCATION#:The P243_LOCATION column, however, has a ':' colon and a '.' values in the database column itself with a value of *'jdbc:Host123.abcd'*
When the user clicks on the link the FULL location column is truncated before the ':' - OBVIOUSLY due to ':' being the paremeter separator column in apex
So, the #LOCATION# value on Page 242 IR Report containing a value of *'jdbc:Host123.abcd'* is trunced on the called page 243 as 'jdbc' only and truncated prior to the ':' value contained in the field.
Question:
HOW Can I build the above URL so that the ':' can be visible on the Page 243 form field? with the full value passed into the called page with a value of: *'jdbc:Host123.abcd'* ?
I tried the SYS.htf_esc(#LOCATION#) around the calling URL above, but doesn't work as expected.
Any advice is greatly appreciated.
VSK

Hi,
You can not escape colons but you can pass commas in the url. Enclose the item value in \item_value\ to escape the "," in the item value . For colons, I would suggest creating a hidden field in the source report with SQL REPLACE function and replace all the colons with any other character like ||. Then you can use the same replace function on the target page to match with the new item value.
Hope it helps. Thanks.
Regards,
Manish

A new line is showing up on messages I receive. It's seems to be a row of links, including a URL to (maybe) the msg source. How do I get rid of it?

On my incoming messages, under my toolbars & above the msg header, is a new line. It sort-of looks like another toolbar, but different. It reads from left to right and each word is highlighted white:
Back Forward Refresh URL: ___________________ Go
Each of these words except for "URL:" are in boxes as if they are links but they don't work like links.
What is this and how do I get it off my incoming messages?
Thanks, nanciewanda

I have no idea. Perhaps you could post the troubleshooting information so we can have a better look at what is going on.
Click the Help menu (Alt+H) and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.

Blog & Podcast pages link to dead URL Page

I've published my new website to a folder, uploaded the data to a non .mac website. Everything works fine, except the blog and the podcast. The blog and podcast main page both appear, but when I click on a story or media selection, I get a URL not found. Checking my site with an FTP client, I can see all the files. However, no matter what I do, the links always go to a dead url page and states Not Found. I find it odd that the whole site works but the blog and podcast archive.
Any work arounds or suggestions?
G5 Mac OS X (10.4.4) 1.6 G5 2gig Ram

Oooooh but URL length does make a difference. Thanks for your help.
I did fix one podcast, but what an undertaking. See link:
http://www.cops-clan.org/web/Podcast/D7CDDCDEAD27.html
Now I must rant:
Alpha-numerical URLs automatically generated by iweb for the blog & podcast archives are to long for some non .mac websites. This causes a Not Fond error message. Since I bought iweb for its simplicity, this software cannot fix the inherent problem either. What I have to do, is use Adobe GoLive 6 to shorten the automatically generated URL number strings of all my blog messages and podcasts. However, I'm still not done. I further more have to go into each blog & podacst HTML file and shorten all the links found there too. Quite an undertaking just to post a message. On my other website located on the same server, I run a Serendipity Blog which runs trouble free. Also, the Serendipity Blog is free and has more functionality.... Go figure. Since all I wanted was a simple cookie cutter website and a no fuss blog, the work around is not worth the effort. I think I will have to dump iweb... this is very disappointing.

Link : DMS to URL

Similar Messages

Maybe you are looking for