Link doesn't open on Safari

i am using iPad Air wifi plus cellular with iOS 8.0.2 Sometimes when i try to open a link on safari, it doesn't do anything. No option works on safari as if the whole screen has hung. I minimize the app and then open the app again by maximizing it and it starts working properly. It happens quite few no of times.
please check and advise.
thank you.
manjeet

Hi ..
Tap Settings > Safari then tap to clear History, Cookies, and Data then restart your iPad.
If that doesn't help, reset your iPad.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.

Similar Messages

Mail links do not open in Safari automatically

Problem started today, when I click on a link in an email, the link does not open in Safari, repaired disk permissions, restarted mail and safari, Safari is the default browser, restarted MacBook Pro a few times, not working. Any ideas?
Cowboy Bill

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

File, Send link doesn't open a new email. Using Firefox 11.0. Outlook 2010 is the Mailto default and W7 default email program. On the About:config page network.protocol-handler.external.mailto is set to regular font (not bold) "default Boolean true".

File, Send link doesn’t open a new email. Running Firefox 11.0. Outlook 2010 is the Mailto default and the W7 default email program. On the About:config page, network.protocol-handler.external.mailto is set to regular font (not bold) “default Boolean true”.

I assume you have tried toggling the setting in Firefox between Outlook and, say, Gmail:
orange Firefox button ''or'' classic Tools menu > Options > Applications
In the search box, type or paste '''mailto''' and pause for the list to filter.
Change the setting and OK to save it, then return to the dialog, change back, and OK again.
You also might want to toggle the setting at the OS level between Microsoft Outlook and the native Windows Mail client in a similar fashion. In Windows XP you could use IE's Options dialog, Programs tab, for this, but I'm not sure in Windows 7.
Since one possibility is a problem in your Firefox settings (including the possibility of interfering add-ons), and another is a problem at the Windows level (e.g., Registry settings), it would be useful to try to identify which one it is. One quick way to distinguish is to create a new Firefox profile. It will start up with all factory settings. You can switch back to your existing profile after testing.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
After closing Firefox, start up again in the Profile Manager as described in this article: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
With the new profile, can Firefox successfully create a message in Outlook?

HT1338 Facebook doesn't open in safari on my MacBook Pro, why? Sometimes it opens and aftersome time just hang on and after that doesn't open at all.

Facebook doesn't open in safari on my MacBook Pro, why? Sometimes it opens and aftersome time just hang on and after that doesn't open at all.

There seems to be a few bugs with iCloud Mail at times, so send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Apple support article, but I don't think it really addresses your problem.
iCloud - Mail Troubleshooting

After a clean install of Yosemite in iCloud remained links, which were opened in Safari on the Mavericks

After a clean install of Yosemite in iCloud remained links, which were opened in Safari on the Mavericks.
Please help remove old and obsolete references to iCloud for Safari.

Hi leonie,
It looks like once my computer was subject to a clean install of OSX Mavericks, programs installed with iLife, i.e. iWeb, GarageBand. iPhoto, etc, were removed from my HD and cannot now be reinstalled.. I form the impression that they are not on the installation DVD's that shipped with my computer, and having examined the disks by placing them in my machine, there is no way I can tell whether that is correct, since there is no 'button' that allows me to look for their presence on the disks.
If you can shed any light on that conclusion, I'd be grateful for any advice you could offer. I guess it's not super imperitive that I have GarageBand '09, I can get by without it, but it would have been nice to have, and a couple of my songs use loops that were from GB '09, and these are now absent from the songs when played back in GB X. Of course, I cannot download the '09 version from the App store. Looks like Apple has me borked!
Thanks for your help, anyway, I'm always pleased to see your name here..
Regards, Ontradio..

PDF-Portfolio: link doesn't open a document in a new window

Hello,
i use Acrobat 9 Pro on Win XP SP3.
I will use a link from a maindocument into a PDF-portfolio to another Portfolio document in the same file.
But the (linked) document should be open in a new window.
I can customize the option: targetdocument open in a new window, but this option/function doesn't work.
The document will always open in the same portfolio-window.
(Create link with link tool>add action>go to a page view in another doc> set link> edit action> open targetdocument in: a new window)
sorry, for the description, but i have only the german GUI.
Is there a change to use a JavaScript in the link?
Thanks for response, maikro.

Check if this KB might be of any help:
https://support.mozilla.org/en-US/kb/tab-preferences-and-settings
Thanks!
Om Prakash

Button link doesn't open after publishing

Hello,
I am trying to put a link into my Captivate project so that users can access our homepage. From what I can tell, the only way to do this is to create a button that opens to a URL. Great, except when the project is published, the link doesn't work.
I've seen the blog post about adjusting the Flash settings to allow access to the site but my questions are: 1) wouldn't you have to adjust these settings on every computer on the user's end? our tutorial is intended for thousands of off campus college students, so this won't work for us. 2) how can you adjust the setting if the Flash error box doesn't appear?
Is there another way to add a link in Captivate that I'm not aware of?
Thanks!
Beth

Hi Beth
Where will the Captivate content be accessed from when the college students view it?
If your answer is to say "Why from our web server, you silly man!". That's the answer I was hoping to hear. Once content is accessed from a server the Flash is in a "safe" zone and the issue doesn't happen. It only happens if you provide the content via CD or otherwise and folks access by running it from their local C drives.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Links in email won't open. When I click on a link, it goes to open tabs in FF, but the new link doesn't open.

When I get a link sent in an email, the link no longer opens when I click on it. When I click on the link, Firefox and the open internet tabs appear on my screen, but the new link does not open. I must manually copy the link, then paste it in the address bar to get it to open.

I have the same problem with FF 3.6.13, and Mac OS 10.6.5.
Clicking links in Mail opens FF, but does not open the URL. Safari has no problems when I reset it as my default browser. The problem seems to develop over time. At first, links open fine, but then all of a sudden they won't.
My remedy has been to reinstall FF, but I've had to do it twice in the last couple of weeks, which is getting a bit annoying.
I have not experienced the problem on either of my two older Macs (running 10.4, and 10.5).

Holding ctrl when clicking a link doesn't open it in a new tab; does nothing

When I try to open a link in a new tab by holding down ctrl while clicking, it does nothing. Doesn't open at all. Have tried restarting in safe mode with add-ons disabled and had no joy.
Also getting no menu when using right click, also tried in safe mode, also nothing.

Should add that holding ctrl works from the bookmarks toolbar, just not in webpages themselves

Pdf links will not open in safari.

Had no problem until upgrade to Lion. Got newest Reader. Genius Bar said Adobe Reader the problem. Got rid of it. Still no pdf pages will open. Can open freestanding pdf files with Reader or Preview. Get a black screen when I click a pdf link. Upgrade Lion on my iMac and no problem, but on my Powerbook the pdf links no longer work in Safari. Tried Firefox and do not work their either but get a while screen.

Hi...
Go to /Library/Internet Plug-Ins
Move the Adobe PDF Browser plugin to the Trash.
Quit then relaunch Safari to test.
If you have trouble finding the files..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/Library/Internet Plug-Ins
Click Go
edited by: cs

OS X: Link shouldn't open in Safari (e.g. opera ist my standard browser)

Hi,
I use Snow Leopard. I've got Opera as standard browser. If I click at an http link in Acrobat Reader, it opens in Safari. Why? Every other programm (e.g. Thunderbird) opens the links in my standard browser. Is there a hidden way to change that? I think, Acrobat Reader should rely on the standard OS setting up,
best regards,
darth

Can you describe what happens in your browsers when
you do try to load a movie?
In both, there is a black box where the video should be. Sometimes it will say "loading" but it never does.
Are there any messages in the console log when you
are viewing these websites? You can check the
console.log via the Console.app located in
/Applications/Utilities.
Here's the message from the console log when I tried to access a random youtube video:
2006-11-19 10:42:18.832 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x8085e50
2006-11-19 10:42:18.894 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x803f8b0
2006-11-19 10:42:18.998 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x7b6b470
2006-11-19 10:42:19.126 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x9783f20
2006-11-19 10:42:20.179 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x972e890
2006-11-19 10:42:20.264 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x9781770
2006-11-19 10:42:20.382 firefox-bin[465] ERROR: carbonAppWindowMouseHandler(): could not create NSEvent for EventRef 0x9773d30
Also, can you list what plugins are present in
/Library/Internet Plug-Ins/ ?
Flash Player.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
Java Applet Plugin Enabler
Java Applet.plugin
JavaPluginCocoa.bundle
NPC-PPC-Dir-Shockwave
nslQTScriptablePlugin.xpt
Quartz Composer.webplugin
QuickTime Plugin.plugin
QuickTime Plugin.webplugin
Real Player Plugin
Real Player Plugin.xpt
Scorch.plugin
VerifiedDownloadPlugin.plugin
Thanks!!
iBook G4 Mac OS X (10.4.8)

Click web link doesn't open a new tab

Before whenever I click on a web link, FF always open a new tab for me. I just recent rebuilt my PC and upgraded FF to 13.0. Now no matter what I change in Options, it only opens the link on my current web page. I know I can do Right-Click but I am just used to this. I found others were having the same issue but they were on much lower version of FF and I don't have any mentioned Add-on installed.

I don't think there is a setting to open all links in a new tab. You can set all links that would normally open in a new window to open in a new tab instead. And like you said you can right-click and select open in a new tab. Also if you click a link to another website from an App Tab it will open in a new tab.
I did find [https://addons.mozilla.org/en-US/firefox/search/?q=open%2Blinks%2Bin%2Ba%2Bnew%2Btab&platform=windows&appver=13.0&page= these add-ons] that might help.

Mailto: Link doesn't work in Safari

In my project, we have a link to open a outlook mail. when i open the link in IE/Chrome/Firefox browser, it opens the outlook with the given mail id. But, same link was not working properly in safari browser.
I am using safari version 5.1.7(7534.57.2). When i click the link, it opens the outlook mail, but my current(Parent) window gets crashed.
Below is the sample code i used.
mc.addEventListener(MouseEvent.CLICK, sendEmail);
function sendEmail(e:MouseEvent):void{
navigateToURL(new URLRequest("mailto:[email protected]"));
Thank in advance

Thanks for your reply..
We already tried that too. But doesn't work.
My problem is after clicking the link, my current window became black screen and it opens the outlook with the given mail id
we are not sure, whether the issue is related to flash player or safari browser.
Any idea?

Clicking email-links doesn't open "new message" window

Hi,
When I click email links, safari doesn't take me to the "new message" window. It activates safari: the program comes on in the dock and the text next to the apple logo changes to "mail", but I don't get the "new message" window

You're welcome. Glad to have helped.
Mahalo (thanks) for the and Aloha from Big Island.

When I click on a link in my Mail account, just recently, the link doesn't open up in firefox.

Normally when there's an email with a link that I receive in My "Mail" account ( I use an apple macbook) the link opens up a new tab in firefox and the url page opens up. For the last 2 weeks, when I get a hot link in my emails, it will launch firefox but no site/page opens up.

Set it in Safari's Preferences/General

Link doesn't open on Safari

Similar Messages

Maybe you are looking for