Link (dyld) error - non boot safari 3.2.1

Hi, this is on tiger.11, G4. After working fine forever, last night this happened, see subject. I didn't install anything relevant, afaik. I do periodically install things like thunderbird nightlies, but have been doing this forever too, I don't think related. Now, when I click on safari icon, this message [I added the brackets] appears instead of safari 3.2.1 app:
[Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/Syndication.framework/Versions/A/Syndication
Referenced from: /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
Reason: image not found]
I ran OnyX x1 on 1st crash. Repaired permissions x2, not counting that OnyX does that too. (Do I need to boot from DVD & repair from there in this case?) I used 3rd party "delete app" to remove all hidden & related files (supposedly) as well. Nothing worked, still crash after install of fresh safari downloaded direct from apple downloads (yes, I downloaded the tiger version). Is the library for "syndication" something that has to be reinstalled from DVD & how did this get corrupted if that's the problem? Are some hard or soft links missing & how did that happen (if it did)? It seems absurd to have to do an archive & install just to get safari back.
So I don't have a working safari now. Please advise. Thank you.

Hi Paul
It's possible something you added to the system overrode or deleted one of the system files, which is triggering the error.
Do you have a backup of your system? If you do, navigate to this location via the Finder: /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A Inside that folder, move the SyndicationUI file to the same location in your current HD.
The alternative is to reinstall the Operating System, using Archive and Install Option, or if you live near an Apple Store someone at the Genius Bar will help you recover from the crash.

Similar Messages

  • Repeated dyld errors reported in sh.crash.log -- how fix?

    On trying to locate where my spare disk space on my boot drive had gone , I found ~user/Library/Logs/CrashReporter had a 274Mb sh.crash.log file...! This seems to entirely consist of repeated dyld error messages (see below). Can anyone suggest a culprit that might be causing this and/or fix for this?
    This seems to only occur once in a long while and when it does, a lot of errors are reported. As such in a sense its more "for my interest" than urgent, but all the same something is afoot...!
    -------------- Error reported: -------------
    Host Name: localhost
    Date/Time: 2006-06-05 11:41:34 +1200
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: sh
    Path: /bin/sh
    Version: ??? (???)
    PID: 9508
    Thread: Unknown
    Link (dyld) error:
    dyld: sh can't open library: /usr/lib/libncurses.5.dylib (Too many open files, errno = 24)
    G4/400   Mac OS X (10.3.9)  

    What kind of script errors do you get?
    You can try a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • The Application Installer quit unexpectedly error when reinstalling Safari

    My Safari no longer functions as it was removed from my Powerbook and I no longer have the installation disk.   I am attempting to manually install Safari3.2.3Ti.dmg.  The installation stops and I receive "The Application Installer quit unexpectedly".  I've tried the disk first aid and searched countless blogs but I am at a loss now.  Please help - thank you in advance - Gary
    Here is the most recent Report:
    Date/Time:      2011-06-28 10:23:20.457 -1000
    OS Version:     10.4.11 (Build 8S165)
    Report Version: 4
    Command: Installer
    Path:   /Applications/Utilities/Installer.app/Contents/MacOS/Installer
    Parent: WindowServer [57]
    Version:        2.1.9 (104)
    Build Version: 36
    Project Name:  Installer
    Source Version: 1040000
    PID:   372
    Thread: Unknown
    Link (dyld) error:
    Symbol not found:__ZN3JSC6JSCell14toThisJSStringEPNS_9ExecStateE
      Referencedfrom:/System/Library/Frameworks/WebKit.framework/Versions/A/Framework s/WebCore.framework/Versions/A/WebCore
      Expected in:/System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCor e
    /System/Library/Frameworks/WebKit.framework/WebKit
    Model: PowerBook5,6, BootROM 4.9.1f3, 1 processors, PowerPCG4  (1.2), 1.5 GHz, 512 MB
    Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 64 MB
    Memory Module: SODIMM0/J25LOWER, 512 MB, DDR SDRAM,PC2700U-25330
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: Jump, V.92, Version 1.0
    Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incomingserial ports
    Network Service: AirPort, AirPort, en1
    Network Service: Built-in Ethernet, PPP (PPPoE), ppp0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITACD-RW  CW-8123
    Parallel ATA Device: FUJITSU MHT2080AH, 74.53 GB
    USB Device: Bluetooth USB Host Controller, Apple, Inc., Upto 12 Mb/sec, 500 mA
    USB Device: Apple Internal Keyboard/Trackpad, AppleComputer, Up to 12 Mb/sec, 500 mA

    Not clear to me why you want to replace an out of date version of Safari with another out of date version?
    If your Safari keeps crashing, or if you are updating Safari (or just have) and it is misbehaving:
    N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings, and don't change the application's name or move it from the top level of the Applications Folder to a sub-folder.
    (If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall. Alternatively you can download Safari directly:
    Safari 4.1.3 for Tiger can be downloaded here:
    http://support.apple.com/kb/DL1069
    Safari 5.0.5 for Leopard (and Snow Leopard) can be downloaded from here:
    http://support.apple.com/kb/DL1070
    Make sure you download the correct version for your system.
    Also, observe the recommended procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up.  If Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now Tiger uses Safari 4.1.3 and Leopard uses Safari 5.0.5, as does Snow Leopard albeit a different version. If these latest versions of Safari are not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to a previous version of Safari  can have repercussions, as previous versions of Safari used a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet, and the dreaded CT Toolbar. If you have them, trash them and go the developer's sites to see if new versions are available for the latest version of Safari on your current operating system.
    You must also ensure that you have downloaded and installed all the correct version for your Mac of Security Updates. These require a restart and a permission repair.
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for  problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    Hard Disk/Library/InputManagers
    Home/Library/InputManagers
    especially prior to system updates and updates to Safari (they can always be added back one-by-one later).
    Lastly, the Safari updates require a restart of your Mac, and sometimes even a double restart is required.

  • ITunes 7.6.2 dyld error with libstdc++

    I updated to 7.6.2 on Apr 12. Since then I have not been able to start iTunes. I'm running OS 10.3.9 on a G4. The crash log is indicating undefined references in the iPodUpdater routines expected to be found in libstc++. Here's the crash log:
    Host Name: alasdair
    Date/Time: 2008-04-12 21:29:25 -0500
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: iTunes
    Path: /Applications/iTunes.app/Contents/MacOS/iTunes
    Version: ??? (???)
    PID: 797
    Thread: Unknown
    Link (dyld) error:
    dyld: /Applications/iTunes.app/Contents/MacOS/iTunes Undefined symbols:
    iPodUpdater undefined reference to _ZTVSt13runtimeerror expected to be defined
    in /usr/lib/libstdc++.6.dylib
    iPodUpdater undefined reference to _ZNSt9badallocD1Ev expected to be defined i
    n /usr/lib/libstdc++.6.dylib
    I am at a loss as to what to do. I tried to download an old version but the installer does not want to write any files (I'm guessing because it detects a newer version already installed). If anyone knows what is going on with dyld and/or can instruct me how to force install an old version of iTunes, I would be much obliged.
    Thank you.

    It could be that the routines/functions that are used in the version of iTunes you have are simply not available in the version of the OS you have, or...that last thing you installed/updated has overwritten a library file that doesn't have the function needed to run.
    i don't know what apple's versioning control is like, but to be fair to them it is hard to keep things consistent when it is possible to have old, very old, new, not so new software all running together.
    pmadrid doesn't say what version of the Mac OS he has, but the previous post using 10.3.9 might be in some difficulties because the stuff that Itunes at that version needs is not available - I know for instance that there is some quicktime that Itunes needs so that ought to be at the latest. I checked the specs and it does say 10.3.9 should be ok but you need QuickTime 6.5.2 or later so check that.
    Also just installing an older version over a newer one isn't always a good idea agai depending on how the installer works for apple, they may simply not overwrite older files or you are compounding the problem by adding even older libraries etc.
    I guess what I would do is to find the Itunes application, drag it to the trash and empty it. Your library will be intact as you are only deleting the application. Then apply any updates your system update detects. Make sure your quicktime is up to snuff and then download the latest version of itunes and reinstall.

  • Dyld error

    Hi,
    I have this huge problem since a few weeks... when clicked, iPhoto bounces once or twice and then crashes. This is the description by console:
    dyld: Library not loaded: /System/Library/Frameworks/Message.framework/Versions/B/Message
    Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Reason: no suitable image found. Did find:
    /System/Library/Frameworks/Message.framework/Versions/B/Message: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    /System/Library/Frameworks/Message.framework/Versions/B/Message: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Apr 25 10:47:12 Matteo-Seregnis-iBook-G4 crashdump[453]: iPhoto crashed
    Apr 25 10:47:13 Matteo-Seregnis-iBook-G4 crashdump[453]: crash report written to: /Users/matteoseregni/Library/Logs/CrashReporter/iPhoto.crash.log
    What can I do? Everything worked just fine before this, now my mac has started crashing often and blocking applications etc...
    Thank you on forehand,
    Matteo Seregni

    Here you are:
    Host Name: Matteo-Seregnis-iBook-G4
    Date/Time: 2010-05-02 11:22:50.215 +0200
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: iPhoto
    Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Parent: WindowServer [56]
    Version: 7.1.5 (7.1.5)
    PID: 259
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /System/Library/Frameworks/Message.framework/Versions/B/Message
    Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Reason: no suitable image found. Did find:
    /System/Library/Frameworks/Message.framework/Versions/B/Message: unknown file type, first eight bytes: 0xA0 0xC9 0xA0 0xC5 0xA0 0xC2 0xA0 0xBF
    /System/Library/Frameworks/Message.framework/Versions/B/Message: unknown file type, first eight bytes: 0xA0 0xC9 0xA0 0xC5 0xA0 0xC2 0xA0 0xBF
    And, even worse, recently it starts signalling the same error also for other applications...
    Host Name: Matteo-Seregnis-iBook-G4
    Date/Time: 2010-05-03 09:45:12.914 +0200
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: TI Connect X
    Path: /Applications/TI Connect/TI Connect X.app/Contents/MacOS/TI Connect X
    Parent: WindowServer [55]
    Version: 1.7 (7)
    PID: 242
    Thread: Unknown
    Link (dyld) error:
    Library not loaded: /System/Library/Frameworks/Message.framework/Versions/B/Message
    Referenced from: /Library/Frameworks/TIAppKit.framework/Versions/A/TIAppKit
    Reason: no suitable image found. Did find:
    /System/Library/Frameworks/Message.framework/Versions/B/Message: unknown file type, first eight bytes: 0xA0 0xC9 0xA0 0xC5 0xA0 0xC2 0xA0 0xBF
    /System/Library/Frameworks/Message.framework/Versions/B/Message: unknown file type, first eight bytes: 0xA0 0xC9 0xA0 0xC5 0xA0 0xC2 0xA0 0xBF

  • Safari 7.0.6 crashes: Dyld Error Message: Symbol Not Found

    After I did the latest MacOS update (10.9.5) Safari (7.0.6) no longer runs. I repaired permissions and also rebooted in safe mode so I could potentially remove any spurious plug-ins, but the last time I did this was with MaxOS 6 so I have no idea where to look in the current version.
    The error message that pops up is:
    Process:         Safari [1279]
    Path:            /Applications/Safari.app/Contents/MacOS/Safari
    Identifier:      com.apple.Safari
    Version:         ???
    Build Info:      WebBrowser-7537085010017001~4
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [194]
    Responsible:     Safari [1279]
    User ID:         505
    Date/Time:       2014-09-26 08:16:17.066 +1000
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  84ADDFB5-CAD4-0759-3667-8E0B47E8E995
    Sleep/Wake UUID: 51EC656E-25AB-4167-810D-D7A644340E28
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries, ignoring DYLD_* env vars
    Dyld Error Message:
    Symbol not found: __ZN3JSC10JSDataView6s_infoE
    Referenced from: /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
    Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
    in /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
    (insert a 'shed load' of other lines of log data which you probably don't need, right?)

    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • Errors At Boot

    I should preface this with I'm not a Linux noob, but I am no expert either (I get by).  Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot.  Never could quite see exactly what they were so today I logged dmesg to a text file.  I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system.  After the errors show the system continues to boot to Openbox.  I was hope someone could tell me what the errors are and how to not get them anymore.  I have posted the dmesg log below, thanks in advanced for any help.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
    [ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000140000000 aka 5120M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
    [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
    [ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
    [ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
    [ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000bffe0000 00040
    [ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
    [ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
    [ 0.000000] On node 0 totalpages: 1048446
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12224 pages used for memmap
    [ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4096 pages used for memmap
    [ 0.000000] Normal zone: 262144 pages, LIFO batch:31
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
    [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ b4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
    [ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.000000] tsc: Unable to calibrate against PIT
    [ 0.000000] tsc: using HPET reference calibration
    [ 0.000000] tsc: Detected 2700.249 MHz processor
    [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
    [ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
    [ 0.013342] pid_max: default: 32768 minimum: 301
    [ 0.013386] Security Framework initialized
    [ 0.013395] AppArmor: AppArmor disabled by boot time parameter
    [ 0.013396] Yama: becoming mindful.
    [ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.017157] Mount-cache hash table entries: 256
    [ 0.017396] Initializing cgroup subsys memory
    [ 0.017414] Initializing cgroup subsys devices
    [ 0.017417] Initializing cgroup subsys freezer
    [ 0.017418] Initializing cgroup subsys net_cls
    [ 0.017420] Initializing cgroup subsys blkio
    [ 0.017442] tseg: 0000000000
    [ 0.017449] CPU: Physical Processor ID: 0
    [ 0.017450] CPU: Processor Core ID: 0
    [ 0.017452] mce: CPU supports 5 MCE banks
    [ 0.017458] LVT offset 0 assigned for vector 0xf9
    [ 0.017462] process: using AMD E400 aware idle routine
    [ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 4
    [ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.018244] ACPI: Core revision 20130725
    [ 0.021196] ACPI: All ACPI Tables successfully acquired
    [ 0.023362] ftrace: allocating 20290 entries in 80 pages
    [ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
    [ 0.069999] Performance Events: AMD PMU driver.
    [ 0.069999] ... version: 0
    [ 0.069999] ... bit width: 48
    [ 0.069999] ... generic registers: 4
    [ 0.069999] ... value mask: 0000ffffffffffff
    [ 0.069999] ... max period: 00007fffffffffff
    [ 0.069999] ... fixed-purpose events: 0
    [ 0.069999] ... event mask: 000000000000000f
    [ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
    [ 0.183403] Brought up 2 CPUs
    [ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
    [ 0.183927] devtmpfs: initialized
    [ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
    [ 0.188111] RTC time: 8:27:34, date: 12/02/13
    [ 0.188111] NET: Registered protocol family 16
    [ 0.188127] cpuidle: using governor ladder
    [ 0.188128] cpuidle: using governor menu
    [ 0.188133] node 0 link 0: io port [b000, ffff]
    [ 0.188135] TOM: 00000000c0000000 aka 3072M
    [ 0.188137] node 0 link 0: mmio [a0000, bffff]
    [ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
    [ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
    [ 0.188145] TOM2: 0000000140000000 aka 5120M
    [ 0.188148] bus: [bus 00-04] on node 0 link 0
    [ 0.188149] bus: 00 [io 0x0000-0xffff]
    [ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
    [ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
    [ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
    [ 0.188168] ACPI: bus type PCI registered
    [ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.199259] PCI: Using configuration type 1 for base access
    [ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.199435] mtrr: corrected configuration.
    [ 0.200005] bio: create slab <bio-0> at 0
    [ 0.200048] ACPI: Added _OSI(Module Device)
    [ 0.200050] ACPI: Added _OSI(Processor Device)
    [ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.200693] ACPI: EC: Look up EC in DSDT
    [ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.204741] ACPI: Interpreter enabled
    [ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
    [ 0.204770] ACPI: (supports S0 S1 S4 S5)
    [ 0.204771] ACPI: Using IOAPIC for interrupt routing
    [ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.204933] ACPI: No dock devices found.
    [ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
    [ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
    [ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
    [ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
    [ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
    [ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
    [ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
    [ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
    [ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
    [ 0.218058] PCI host bridge to bus 0000:00
    [ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
    [ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
    [ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
    [ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
    [ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
    [ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
    [ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
    [ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
    [ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
    [ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
    [ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
    [ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
    [ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
    [ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
    [ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
    [ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
    [ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
    [ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
    [ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
    [ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
    [ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
    [ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
    [ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
    [ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
    [ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
    [ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
    [ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
    [ 0.219665] pci 0000:00:13.5: supports D1 D2
    [ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
    [ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
    [ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
    [ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
    [ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
    [ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
    [ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
    [ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
    [ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
    [ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
    [ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
    [ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    [ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
    [ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
    [ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
    [ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
    [ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.226865] pci 0000:02:00.0: supports D1 D2
    [ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
    [ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
    [ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
    [ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
    [ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
    [ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
    [ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
    [ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
    [ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
    [ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
    [ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
    [ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
    [ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
    [ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
    [ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
    [ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
    [ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.235177] Found 1 acpi root devices
    [ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.235262] vgaarb: loaded
    [ 0.235262] vgaarb: bridge control possible 0000:01:00.0
    [ 0.235262] PCI: Using ACPI for IRQ routing
    [ 0.244778] PCI: pci_cache_line_size set to 64 bytes
    [ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
    [ 0.244956] NetLabel: Initializing
    [ 0.244957] NetLabel: domain hash size = 128
    [ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.244971] NetLabel: unlabeled traffic allowed by default
    [ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.246697] Switched to clocksource hpet
    [ 0.251917] pnp: PnP ACPI init
    [ 0.251938] ACPI: bus type PNP registered
    [ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
    [ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
    [ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
    [ 0.252201] system 00:00: [io 0x040b] has been reserved
    [ 0.252204] system 00:00: [io 0x04d6] has been reserved
    [ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
    [ 0.252209] system 00:00: [io 0x0c14] has been reserved
    [ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
    [ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.252216] system 00:00: [io 0x0c6f] has been reserved
    [ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
    [ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
    [ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
    [ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.252336] pnp 00:01: [dma 4]
    [ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
    [ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
    [ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.252767] pnp 00:07: [dma 2]
    [ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
    [ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
    [ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
    [ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.253938] pnp: PnP ACPI: found 13 devices
    [ 0.253939] ACPI: bus type PNP unregistered
    [ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
    [ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
    [ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
    [ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
    [ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
    [ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
    [ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
    [ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
    [ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
    [ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
    [ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
    [ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
    [ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
    [ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
    [ 0.261266] NET: Registered protocol family 2
    [ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.262046] TCP: reno registered
    [ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262209] NET: Registered protocol family 1
    [ 0.616902] pci 0000:01:00.0: Boot video device
    [ 0.616913] PCI: CLS 32 bytes, default 64
    [ 0.616966] Unpacking initramfs...
    [ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
    [ 0.677630] PCI-DMA: Disabling AGP.
    [ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
    [ 0.677712] PCI-DMA: using GART IOMMU.
    [ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.682349] Scanning for low memory corruption every 60 seconds
    [ 0.682695] audit: initializing netlink socket (disabled)
    [ 0.682709] type=2000 audit(1385972853.679:1): initialized
    [ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.695128] zbud: loaded
    [ 0.695281] VFS: Disk quotas dquot_6.5.2
    [ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.695554] msgmni has been set to 7910
    [ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.695993] io scheduler noop registered
    [ 0.695995] io scheduler deadline registered
    [ 0.696025] io scheduler cfq registered (default)
    [ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
    [ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
    [ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [ 0.696445] vesafb: scrolling: redraw
    [ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
    [ 0.702849] Console: switching to colour frame buffer device 80x30
    [ 0.709096] fb0: VESA VGA frame buffer device
    [ 0.709135] GHES: HEST is not enabled!
    [ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
    [ 0.750958] Linux agpgart interface v0.103
    [ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.751860] mousedev: PS/2 mouse device common for all mice
    [ 0.751927] rtc_cmos 00:03: RTC can wake from S4
    [ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.752187] drop_monitor: Initializing network drop monitor service
    [ 0.752254] TCP: cubic registered
    [ 0.752361] NET: Registered protocol family 10
    [ 0.752553] NET: Registered protocol family 17
    [ 0.752565] Key type dns_resolver registered
    [ 0.752847] registered taskstats version 1
    [ 0.753423] Magic number: 9:957:471
    [ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
    [ 0.753559] PM: Hibernation image not present or could not be loaded.
    [ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.755072] Write protecting the kernel read-only data: 8192k
    [ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
    [ 0.769771] systemd-udevd[47]: starting version 208
    [ 0.794492] Floppy drive(s): fd0 is 1.44M
    [ 0.803163] ACPI: bus type USB registered
    [ 0.803196] usbcore: registered new interface driver usbfs
    [ 0.803207] usbcore: registered new interface driver hub
    [ 0.804032] usbcore: registered new device driver usb
    [ 0.804145] SCSI subsystem initialized
    [ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.805956] ohci-pci: OHCI PCI platform driver
    [ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
    [ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 0.808453] ehci-pci: EHCI PCI platform driver
    [ 0.810692] FDC 0 is a post-1991 82077
    [ 0.810859] libata version 3.00 loaded.
    [ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 0.812133] scsi0 : pata_jmicron
    [ 0.812212] scsi1 : pata_jmicron
    [ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
    [ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
    [ 0.860877] hub 1-0:1.0: USB hub found
    [ 0.860890] hub 1-0:1.0: 2 ports detected
    [ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
    [ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
    [ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 0.917507] hub 2-0:1.0: USB hub found
    [ 0.917518] hub 2-0:1.0: 2 ports detected
    [ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
    [ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
    [ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 0.974160] hub 3-0:1.0: USB hub found
    [ 0.974171] hub 3-0:1.0: 2 ports detected
    [ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
    [ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
    [ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.030833] hub 4-0:1.0: USB hub found
    [ 1.030843] hub 4-0:1.0: 2 ports detected
    [ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
    [ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
    [ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.087499] hub 5-0:1.0: USB hub found
    [ 1.087509] hub 5-0:1.0: 2 ports detected
    [ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
    [ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
    [ 1.643840] usb 1-1: USB disconnect, device number 2
    [ 1.644033] usb 1-2: USB disconnect, device number 3
    [ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
    [ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
    [ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.760313] ehci-pci 0000:00:13.5: debug port 1
    [ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.770182] hub 6-0:1.0: USB hub found
    [ 1.770191] hub 6-0:1.0: 10 ports detected
    [ 1.826731] hub 1-0:1.0: USB hub found
    [ 1.826742] hub 1-0:1.0: 2 ports detected
    [ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.828580] usbcore: registered new interface driver usbhid
    [ 1.828583] usbhid: USB HID core driver
    [ 1.883417] hub 2-0:1.0: USB hub found
    [ 1.883431] hub 2-0:1.0: 2 ports detected
    [ 1.940057] hub 3-0:1.0: USB hub found
    [ 1.940067] hub 3-0:1.0: 2 ports detected
    [ 1.996722] hub 4-0:1.0: USB hub found
    [ 1.996732] hub 4-0:1.0: 2 ports detected
    [ 2.053388] hub 5-0:1.0: USB hub found
    [ 2.053398] hub 5-0:1.0: 2 ports detected
    [ 2.053683] ahci 0000:00:12.0: version 3.0
    [ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 2.054699] scsi2 : ahci
    [ 2.054775] scsi3 : ahci
    [ 2.054850] scsi4 : ahci
    [ 2.054920] scsi5 : ahci
    [ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 2.056192] scsi6 : pata_atiixp
    [ 2.056251] scsi7 : pata_atiixp
    [ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 2.067129] scsi8 : ahci
    [ 2.067200] scsi9 : ahci
    [ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
    [ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
    [ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
    [ 2.227109] ata7.00: configured for UDMA/33
    [ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
    [ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
    [ 2.540027] ata3: softreset failed (device not ready)
    [ 2.540185] ata3: applying PMP SRST workaround and retrying
    [ 2.540217] ata5: softreset failed (device not ready)
    [ 2.540381] ata5: applying PMP SRST workaround and retrying
    [ 2.540408] ata4: softreset failed (device not ready)
    [ 2.540563] ata4: applying PMP SRST workaround and retrying
    [ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
    [ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
    [ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
    [ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.708445] ata3.00: configured for UDMA/133
    [ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
    [ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.709436] ata4.00: configured for UDMA/133
    [ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
    [ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
    [ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
    [ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.716937] sdb: sdb1
    [ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
    [ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.719683] ata5.00: configured for UDMA/133
    [ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
    [ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
    [ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
    [ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
    [ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
    res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 2.728116] ata5.00: status: { DRDY }
    [ 2.728231] ata5: hard resetting link
    [ 2.736521] sda: sda1 sda2 < sda5 >
    [ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
    [ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
    [ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
    [ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
    [ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
    [ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
    [ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
    [ 3.213356] ata5: softreset failed (device not ready)
    [ 3.213519] ata5: applying PMP SRST workaround and retrying
    [ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    [ 3.392798] ata5.00: revalidation failed (errno=-5)
    [ 8.380028] ata5: hard resetting link
    [ 8.866697] ata5: softreset failed (device not ready)
    [ 8.866861] ata5: applying PMP SRST workaround and retrying
    [ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 9.046260] ata5.00: configured for UDMA/133
    [ 9.046276] ata5: EH complete
    [ 9.052053] sdc: sdc1
    [ 9.052397] sdc: detected capacity change from 0 to 1000204886016
    [ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
    [ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
    [ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
    res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
    [ 9.103442] ata5.00: status: { DRDY }
    [ 9.103556] ata5: hard resetting link
    [ 9.590022] ata5: softreset failed (device not ready)
    [ 9.590182] ata5: applying PMP SRST workaround and retrying
    [ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    [ 9.769458] ata5.00: revalidation failed (errno=-5)
    [ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.756687] ata5: hard resetting link
    [ 15.243350] ata5: softreset failed (device not ready)
    [ 15.247493] ata5: applying PMP SRST workaround and retrying
    [ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 15.426255] ata5.00: configured for UDMA/133
    [ 15.426271] ata5: EH complete
    [ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
    [ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
    [ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
    res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
    [ 15.497016] ata5.00: status: { DRDY }
    [ 15.501349] ata5: hard resetting link
    [ 15.986684] ata5: softreset failed (device not ready)
    [ 15.990999] ata5: applying PMP SRST workaround and retrying
    [ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.169560] ata5.00: configured for UDMA/133
    [ 16.169567] ata5: EH complete
    [ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
    [ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
    [ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
    [ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
    res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 16.270799] ata5.00: status: { DRDY }
    [ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
    [ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
    res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 16.297504] ata5.00: status: { DRDY }
    [ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
    [ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
    res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 16.324306] ata5.00: status: { DRDY }
    [ 16.328707] ata5: hard resetting link
    [ 16.813352] ata5: softreset failed (device not ready)
    [ 16.817758] ata5: applying PMP SRST workaround and retrying
    [ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.996263] ata5.00: configured for UDMA/133
    [ 16.996279] ata5: EH complete
    [ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
    [ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
    [ 18.110443] systemd[1]: Starting Remote File Systems.
    [ 18.110456] systemd[1]: Reached target Remote File Systems.
    [ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
    [ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 18.110638] systemd[1]: Starting Encrypted Volumes.
    [ 18.110651] systemd[1]: Reached target Encrypted Volumes.
    [ 18.110664] systemd[1]: Starting Journal Socket.
    [ 18.110711] systemd[1]: Listening on Journal Socket.
    [ 18.110728] systemd[1]: Starting Setup Virtual Console...
    [ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 18.139007] systemd[1]: Mounting Huge Pages File System...
    [ 18.139550] systemd[1]: Starting Journal Service...
    [ 18.140217] systemd[1]: Started Journal Service.
    [ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
    [ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 18.806623] systemd-udevd[155]: starting version 208
    [ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 19.331559] ACPI: Power Button [PWRB]
    [ 19.331882] ACPI: Fan [FAN] (on)
    [ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
    [ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 19.337764] ACPI: Power Button [PWRF]
    [ 19.337878] ACPI: Invalid passive threshold
    [ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
    [ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
    [ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 19.388553] wmi: Mapper loaded
    [ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
    [ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
    [ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 19.717185] MCE: In-kernel MCE decoding enabled.
    [ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 19.780737] [drm] Initialized drm 1.1.0 20060810
    [ 19.801750] EDAC MC: Ver: 3.0.0
    [ 19.808239] sky2: driver version 1.30
    [ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
    [ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
    [ 19.870517] AMD64 EDAC driver v3.4.0
    [ 19.895226] microcode: AMD CPU family 0xf not supported
    [ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
    [ 20.021077] kvm: Nested Virtualization enabled
    [ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
    [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
    [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
    [ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
    [ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
    [ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 20.100569] Console: switching to colour dummy device 80x25
    [ 20.101154] [drm] hdmi device not found 1 0 1
    [ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
    [ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
    [ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
    [ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
    [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
    [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
    [ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    [ 20.158048] sp5100_tco: PCI Revision ID: 0x13
    [ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
    [ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
    [ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
    [ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
    [ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
    [ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
    [ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
    [ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
    [ 20.204615] [TTM] Initializing pool allocator
    [ 20.204619] [TTM] Initializing DMA pool allocator
    [ 20.204630] nouveau [ DRM] VRAM: 512 MiB
    [ 20.204632] nouveau [ DRM] GART: 1048576 MiB
    [ 20.204636] nouveau [ DRM] TMDS table version 2.0
    [ 20.204638] nouveau [ DRM] DCB version 4.0
    [ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
    [ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
    [ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
    [ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
    [ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
    [ 20.204652] nouveau [ DRM] DCB conn 00: 2030
    [ 20.204655] nouveau [ DRM] DCB conn 01: 1130
    [ 20.204657] nouveau [ DRM] DCB conn 02: 0210
    [ 20.204659] nouveau [ DRM] DCB conn 03: 0211
    [ 20.204660] nouveau [ DRM] DCB conn 04: 0213
    [ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
    [ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
    [ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 20.210897] [drm] No driver support for vblank timestamp query.
    [ 20.211027] nouveau [ DRM] 1 available performance level(s)
    [ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
    [ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
    [ 20.214375] ppdev: user-space parallel port driver
    [ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
    [ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
    [ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
    [ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
    [ 20.288622] EDAC amd64: DRAM ECC disabled.
    [ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 20.288675] fbcon: nouveaufb (fb0) is primary device
    [ 20.376049] Console: switching to colour frame buffer device 128x48
    [ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [ 20.376340] nouveau 0000:01:00.0: registered panic notifier
    [ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
    [ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
    [ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
    [ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
    [ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
    [ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
    [ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
    [ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 102.400046] ata4.00: status: { DRDY }
    [ 102.400051] ata4: hard resetting link
    [ 102.933349] ata4: softreset failed (device not ready)
    [ 102.933356] ata4: applying PMP SRST workaround and retrying
    [ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 103.102326] ata4.00: configured for UDMA/133
    [ 103.102330] ata4.00: device reported invalid CHS sector 0
    [ 103.102340] sd 3:0:0:0: [sdb]
    [ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
    [ 103.102344] sd 3:0:0:0: [sdb]
    [ 103.102345] Sense Key : 0xb [current] [descriptor]
    [ 103.102348] Descriptor sense data with sense descriptors (in hex):
    [ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 103.102355] 00 00 00 00
    [ 103.102358] sd 3:0:0:0: [sdb]
    [ 103.102359] ASC=0x0 ASCQ=0x0
    [ 103.102361] sd 3:0:0:0: [sdb] CDB:
    [ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
    [ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
    [ 103.102415] ata4: EH complete
    [ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
    [ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
    [ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386714] ata4.00: status: { DRDY }
    [ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386723] ata4.00: status: { DRDY }
    [ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386731] ata4.00: status: { DRDY }
    [ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386740] ata4.00: status: { DRDY }
    [ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386748] ata4.00: status: { DRDY }
    [ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386757] ata4.00: status: { DRDY }
    [ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
    res 40/00:00:00:00:00/00:00:

    I should preface this with I'm not a Linux noob, but I am no expert either (I get by).  Also I hope this is the right forum to post in. So after I updated about a week ago I start seeing errors at boot.  Never could quite see exactly what they were so today I logged dmesg to a text file.  I should also say the only real problem I have seen outside of the errors showing is Plex Media Server having an issue streaming my media that is kept on a separate hard drive from the main system.  After the errors show the system continues to boot to Openbox.  I was hope someone could tell me what the errors are and how to not get them anymore.  I have posted the dmesg log below, thanks in advanced for any help.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffe2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bffe3000-0x00000000bffeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: Unknow Unknow/HA04, BIOS 6.00 PG 04/16/2008
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
    [ 0.000000] 2 base 0100000000 mask FFC0000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000140000000 aka 5120M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f3c70-0x000f3c7f] mapped at [ffff8800000f3c70]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    [ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    [ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
    [ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbffdffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbfdfffff] page 2M
    [ 0.000000] [mem 0xbfe00000-0xbffdffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37a04000-0x37cf9fff]
    [ 0.000000] ACPI: RSDP 00000000000f7e70 00024 (v02 790FX )
    [ 0.000000] ACPI: XSDT 00000000bffe3080 00044 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 00000000bffeaa40 000F4 (v03 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 00000000bffe3200 07822 (v01 790FX AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 00000000bffe0000 00040
    [ 0.000000] ACPI: HPET 00000000bffeac00 00038 (v01 790FX AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 00000000bffeac40 0003C (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 00000000bffeab40 00084 (v01 790FX AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] Scanning NUMA topology in Northbridge 24
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
    [ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]
    [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x13fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xbffdffff]
    [ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
    [ 0.000000] On node 0 totalpages: 1048446
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12224 pages used for memmap
    [ 0.000000] DMA32 zone: 782304 pages, LIFO batch:31
    [ 0.000000] Normal zone: 4096 pages used for memmap
    [ 0.000000] Normal zone: 262144 pages, LIFO batch:31
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffe2fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbffe3000-0xbffeffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
    [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032041
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f3bb4b9d-d9f1-4ef7-9180-07f1d4a00fc2 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ b4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
    [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
    [ 0.000000] Memory: 3981312K/4193784K available (5115K kernel code, 806K rwdata, 1708K rodata, 1144K init, 1288K bss, 212472K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.000000] tsc: Unable to calibrate against PIT
    [ 0.000000] tsc: using HPET reference calibration
    [ 0.000000] tsc: Detected 2700.249 MHz processor
    [ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
    [ 0.013338] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.51 BogoMIPS (lpj=9000830)
    [ 0.013342] pid_max: default: 32768 minimum: 301
    [ 0.013386] Security Framework initialized
    [ 0.013395] AppArmor: AppArmor disabled by boot time parameter
    [ 0.013396] Yama: becoming mindful.
    [ 0.013706] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.015721] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.017157] Mount-cache hash table entries: 256
    [ 0.017396] Initializing cgroup subsys memory
    [ 0.017414] Initializing cgroup subsys devices
    [ 0.017417] Initializing cgroup subsys freezer
    [ 0.017418] Initializing cgroup subsys net_cls
    [ 0.017420] Initializing cgroup subsys blkio
    [ 0.017442] tseg: 0000000000
    [ 0.017449] CPU: Physical Processor ID: 0
    [ 0.017450] CPU: Processor Core ID: 0
    [ 0.017452] mce: CPU supports 5 MCE banks
    [ 0.017458] LVT offset 0 assigned for vector 0xf9
    [ 0.017462] process: using AMD E400 aware idle routine
    [ 0.017464] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 4
    [ 0.017546] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.018244] ACPI: Core revision 20130725
    [ 0.021196] ACPI: All ACPI Tables successfully acquired
    [ 0.023362] ftrace: allocating 20290 entries in 80 pages
    [ 0.034097] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.068081] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (fam: 0f, model: 6b, stepping: 02)
    [ 0.069999] Performance Events: AMD PMU driver.
    [ 0.069999] ... version: 0
    [ 0.069999] ... bit width: 48
    [ 0.069999] ... generic registers: 4
    [ 0.069999] ... value mask: 0000ffffffffffff
    [ 0.069999] ... max period: 00007fffffffffff
    [ 0.069999] ... fixed-purpose events: 0
    [ 0.069999] ... event mask: 000000000000000f
    [ 0.083388] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.090068] smpboot: Booting Node 0, Processors # 1 OK
    [ 0.183403] Brought up 2 CPUs
    [ 0.183406] smpboot: Total of 2 processors activated (10805.89 BogoMIPS)
    [ 0.183927] devtmpfs: initialized
    [ 0.188111] PM: Registering ACPI NVS region [mem 0xbffe0000-0xbffe2fff] (12288 bytes)
    [ 0.188111] RTC time: 8:27:34, date: 12/02/13
    [ 0.188111] NET: Registered protocol family 16
    [ 0.188127] cpuidle: using governor ladder
    [ 0.188128] cpuidle: using governor menu
    [ 0.188133] node 0 link 0: io port [b000, ffff]
    [ 0.188135] TOM: 00000000c0000000 aka 3072M
    [ 0.188137] node 0 link 0: mmio [a0000, bffff]
    [ 0.188140] node 0 link 0: mmio [c0000000, dfffffff]
    [ 0.188142] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.188144] node 0 link 0: mmio [e0000000, e04fffff]
    [ 0.188145] TOM2: 0000000140000000 aka 5120M
    [ 0.188148] bus: [bus 00-04] on node 0 link 0
    [ 0.188149] bus: 00 [io 0x0000-0xffff]
    [ 0.188151] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.188152] bus: 00 [mem 0xc0000000-0xefffffff]
    [ 0.188153] bus: 00 [mem 0xf0000000-0xffffffff]
    [ 0.188155] bus: 00 [mem 0x140000000-0xfcffffffff]
    [ 0.188168] ACPI: bus type PCI registered
    [ 0.188170] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.188231] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.188234] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.199259] PCI: Using configuration type 1 for base access
    [ 0.199433] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.199434] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.199435] mtrr: corrected configuration.
    [ 0.200005] bio: create slab <bio-0> at 0
    [ 0.200048] ACPI: Added _OSI(Module Device)
    [ 0.200050] ACPI: Added _OSI(Processor Device)
    [ 0.200052] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.200053] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.200693] ACPI: EC: Look up EC in DSDT
    [ 0.201612] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.204741] ACPI: Interpreter enabled
    [ 0.204755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.204760] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hwxface-571)
    [ 0.204770] ACPI: (supports S0 S1 S4 S5)
    [ 0.204771] ACPI: Using IOAPIC for interrupt routing
    [ 0.204841] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.204933] ACPI: No dock devices found.
    [ 0.217777] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.217785] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.217787] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.218038] ACPI: \_SB_.PCI0.SYSR: can't evaluate _ADR (0x5)
    [ 0.218040] ACPI: \_SB_.PCI0.FDC0: can't evaluate _ADR (0x5)
    [ 0.218043] ACPI: \_SB_.PCI0.UAR1: can't evaluate _ADR (0x5)
    [ 0.218045] ACPI: \_SB_.PCI0.UAR2: can't evaluate _ADR (0x5)
    [ 0.218047] ACPI: \_SB_.PCI0.IRDA: can't evaluate _ADR (0x5)
    [ 0.218050] ACPI: \_SB_.PCI0.LPT1: can't evaluate _ADR (0x5)
    [ 0.218052] ACPI: \_SB_.PCI0.ECP1: can't evaluate _ADR (0x5)
    [ 0.218054] ACPI: \_SB_.PCI0.PS2M: can't evaluate _ADR (0x5)
    [ 0.218057] ACPI: \_SB_.PCI0.PS2K: can't evaluate _ADR (0x5)
    [ 0.218058] PCI host bridge to bus 0000:00
    [ 0.218061] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.218063] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.218065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.218068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.218069] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.218072] pci_bus 0000:00: root bus resource [mem 0xbfff0000-0xffffffff]
    [ 0.218083] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000
    [ 0.218097] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.218196] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
    [ 0.218233] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.218280] pci 0000:00:02.0: System wakeup disabled by ACPI
    [ 0.218322] pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
    [ 0.218357] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.218402] pci 0000:00:06.0: System wakeup disabled by ACPI
    [ 0.218438] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
    [ 0.218473] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.218518] pci 0000:00:07.0: System wakeup disabled by ACPI
    [ 0.218573] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
    [ 0.218594] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
    [ 0.218605] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
    [ 0.218616] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
    [ 0.218626] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
    [ 0.218637] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
    [ 0.218648] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.218671] pci 0000:00:12.0: set SATA to AHCI mode
    [ 0.218780] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
    [ 0.218795] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
    [ 0.218895] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.218932] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
    [ 0.218947] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.219048] pci 0000:00:13.1: System wakeup disabled by ACPI
    [ 0.219087] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
    [ 0.219102] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.219203] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.219238] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
    [ 0.219253] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.219354] pci 0000:00:13.3: System wakeup disabled by ACPI
    [ 0.219390] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
    [ 0.219405] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
    [ 0.219506] pci 0000:00:13.4: System wakeup disabled by ACPI
    [ 0.219554] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
    [ 0.219575] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
    [ 0.219665] pci 0000:00:13.5: supports D1 D2
    [ 0.219668] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.219716] pci 0000:00:13.5: System wakeup disabled by ACPI
    [ 0.219759] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.219783] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
    [ 0.219793] pci 0000:00:14.0: reg 0x14: [mem 0xfed00000-0xfed003ff]
    [ 0.219934] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
    [ 0.219952] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
    [ 0.219963] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
    [ 0.219974] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
    [ 0.219984] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
    [ 0.219995] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
    [ 0.220124] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.220151] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.220234] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.220287] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.220322] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
    [ 0.220460] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.220536] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.220575] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.220645] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.220712] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.220779] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.220904] pci 0000:01:00.0: [10de:042c] type 00 class 0x030000
    [ 0.220917] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    [ 0.220929] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.220942] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.220951] pci 0000:01:00.0: reg 0x24: [io 0xcf00-0xcf7f]
    [ 0.220959] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.226682] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.226687] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
    [ 0.226690] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.226694] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.226751] pci 0000:02:00.0: [11ab:4364] type 00 class 0x020000
    [ 0.226769] pci 0000:02:00.0: reg 0x10: [mem 0xfdcfc000-0xfdcfffff 64bit]
    [ 0.226780] pci 0000:02:00.0: reg 0x18: [io 0xee00-0xeeff]
    [ 0.226813] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.226865] pci 0000:02:00.0: supports D1 D2
    [ 0.226868] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233345] pci 0000:00:06.0: PCI bridge to [bus 02]
    [ 0.233349] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
    [ 0.233352] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.233356] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.233407] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
    [ 0.233479] pci 0000:03:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
    [ 0.233491] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
    [ 0.233534] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.233590] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
    [ 0.233608] pci 0000:03:00.1: reg 0x10: [io 0xdf00-0xdf07]
    [ 0.233617] pci 0000:03:00.1: reg 0x14: [io 0xde00-0xde03]
    [ 0.233626] pci 0000:03:00.1: reg 0x18: [io 0xdd00-0xdd07]
    [ 0.233635] pci 0000:03:00.1: reg 0x1c: [io 0xdc00-0xdc03]
    [ 0.233644] pci 0000:03:00.1: reg 0x20: [io 0xdb00-0xdb0f]
    [ 0.233730] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.233738] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.233742] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
    [ 0.233745] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.233749] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.233826] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.233831] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
    [ 0.233835] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.233840] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
    [ 0.233843] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.233845] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.233847] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.233850] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.233852] pci 0000:00:14.4: bridge window [mem 0xbfff0000-0xffffffff] (subtractive decode)
    [ 0.234022] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234071] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234165] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234260] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234308] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.234355] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.235135] ACPI: Enabled 2 GPEs in block 00 to 1F
    [ 0.235141] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.235177] Found 1 acpi root devices
    [ 0.235262] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.235262] vgaarb: loaded
    [ 0.235262] vgaarb: bridge control possible 0000:01:00.0
    [ 0.235262] PCI: Using ACPI for IRQ routing
    [ 0.244778] PCI: pci_cache_line_size set to 64 bytes
    [ 0.244786] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.244846] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.244848] e820: reserve RAM buffer [mem 0xbffe0000-0xbfffffff]
    [ 0.244956] NetLabel: Initializing
    [ 0.244957] NetLabel: domain hash size = 128
    [ 0.244959] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.244971] NetLabel: unlabeled traffic allowed by default
    [ 0.244995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.244999] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.246697] Switched to clocksource hpet
    [ 0.251917] pnp: PnP ACPI init
    [ 0.251938] ACPI: bus type PNP registered
    [ 0.252120] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.252151] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.252156] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.252160] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
    [ 0.252195] system 00:00: [io 0x4100-0x411f] has been reserved
    [ 0.252199] system 00:00: [io 0x0228-0x022f] has been reserved
    [ 0.252201] system 00:00: [io 0x040b] has been reserved
    [ 0.252204] system 00:00: [io 0x04d6] has been reserved
    [ 0.252206] system 00:00: [io 0x0c00-0x0c01] has been reserved
    [ 0.252209] system 00:00: [io 0x0c14] has been reserved
    [ 0.252211] system 00:00: [io 0x0c50-0x0c52] has been reserved
    [ 0.252214] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.252216] system 00:00: [io 0x0c6f] has been reserved
    [ 0.252219] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.252221] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.252224] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.252226] system 00:00: [io 0x4000-0x40fe] could not be reserved
    [ 0.252229] system 00:00: [io 0x4210-0x4217] has been reserved
    [ 0.252231] system 00:00: [io 0x0b10-0x0b1f] has been reserved
    [ 0.252235] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.252239] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.252336] pnp 00:01: [dma 4]
    [ 0.252360] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.252442] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.252487] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.252510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.252544] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.252614] system 00:06: [io 0x04d0-0x04d1] has been reserved
    [ 0.252617] system 00:06: [io 0x0f40-0x0f45] has been reserved
    [ 0.252620] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.252767] pnp 00:07: [dma 2]
    [ 0.252808] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.253041] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.253372] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
    [ 0.253612] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.253805] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.253859] pnp 00:0c: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253862] pnp 00:0c: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253865] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253868] pnp 00:0c: disabling [mem 0x00100000-0xbffdffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.253878] pnp 00:0c: disabling [mem 0xfed00000-0xfed000ff] because it overlaps 0000:00:14.0 BAR 1 [mem 0xfed00000-0xfed003ff]
    [ 0.253911] system 00:0c: [mem 0xbffe0000-0xbfffffff] could not be reserved
    [ 0.253914] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.253917] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.253919] system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.253922] system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.253924] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.253938] pnp: PnP ACPI: found 13 devices
    [ 0.253939] ACPI: bus type PNP unregistered
    [ 0.261111] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.261115] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.261118] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
    [ 0.261121] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.261124] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.261129] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
    [ 0.261131] pci 0000:00:06.0: PCI bridge to [bus 02]
    [ 0.261133] pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
    [ 0.261136] pci 0000:00:06.0: bridge window [mem 0xfdc00000-0xfdcfffff]
    [ 0.261139] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.261144] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
    [ 0.261146] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.261148] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
    [ 0.261151] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.261154] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.261158] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.261161] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
    [ 0.261166] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.261171] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref]
    [ 0.261178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.261180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.261182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.261184] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.261186] pci_bus 0000:00: resource 8 [mem 0xbfff0000-0xffffffff]
    [ 0.261188] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
    [ 0.261190] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.261192] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.261195] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.261197] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
    [ 0.261199] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.261201] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.261203] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.261205] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
    [ 0.261207] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
    [ 0.261209] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
    [ 0.261211] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
    [ 0.261213] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.261215] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.261217] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.261219] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.261221] pci_bus 0000:04: resource 8 [mem 0xbfff0000-0xffffffff]
    [ 0.261266] NET: Registered protocol family 2
    [ 0.261475] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.261731] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.261986] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.262046] TCP: reno registered
    [ 0.262057] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262089] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.262209] NET: Registered protocol family 1
    [ 0.616902] pci 0000:01:00.0: Boot video device
    [ 0.616913] PCI: CLS 32 bytes, default 64
    [ 0.616966] Unpacking initramfs...
    [ 0.676909] Freeing initrd memory: 3032K (ffff880037a04000 - ffff880037cfa000)
    [ 0.677630] PCI-DMA: Disabling AGP.
    [ 0.677710] PCI-DMA: aperture base @ b4000000 size 65536 KB
    [ 0.677712] PCI-DMA: using GART IOMMU.
    [ 0.677715] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.682349] Scanning for low memory corruption every 60 seconds
    [ 0.682695] audit: initializing netlink socket (disabled)
    [ 0.682709] type=2000 audit(1385972853.679:1): initialized
    [ 0.693650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.695128] zbud: loaded
    [ 0.695281] VFS: Disk quotas dquot_6.5.2
    [ 0.695335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.695554] msgmni has been set to 7910
    [ 0.695944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.695993] io scheduler noop registered
    [ 0.695995] io scheduler deadline registered
    [ 0.696025] io scheduler cfq registered (default)
    [ 0.696145] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.696229] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
    [ 0.696299] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
    [ 0.696374] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.696391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.696444] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [ 0.696445] vesafb: scrolling: redraw
    [ 0.696447] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.696504] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1216k, total 1216k
    [ 0.702849] Console: switching to colour frame buffer device 80x30
    [ 0.709096] fb0: VESA VGA frame buffer device
    [ 0.709135] GHES: HEST is not enabled!
    [ 0.709196] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.729882] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.750605] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
    [ 0.750958] Linux agpgart interface v0.103
    [ 0.751006] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.751007] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.751728] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.751860] mousedev: PS/2 mouse device common for all mice
    [ 0.751927] rtc_cmos 00:03: RTC can wake from S4
    [ 0.752067] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.752106] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.752187] drop_monitor: Initializing network drop monitor service
    [ 0.752254] TCP: cubic registered
    [ 0.752361] NET: Registered protocol family 10
    [ 0.752553] NET: Registered protocol family 17
    [ 0.752565] Key type dns_resolver registered
    [ 0.752847] registered taskstats version 1
    [ 0.753423] Magic number: 9:957:471
    [ 0.753514] rtc_cmos 00:03: setting system clock to 2013-12-02 08:27:34 UTC (1385972854)
    [ 0.753559] PM: Hibernation image not present or could not be loaded.
    [ 0.755068] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.755072] Write protecting the kernel read-only data: 8192k
    [ 0.758083] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 0.759079] Freeing unused kernel memory: 340K (ffff8800017ab000 - ffff880001800000)
    [ 0.769771] systemd-udevd[47]: starting version 208
    [ 0.794492] Floppy drive(s): fd0 is 1.44M
    [ 0.803163] ACPI: bus type USB registered
    [ 0.803196] usbcore: registered new interface driver usbfs
    [ 0.803207] usbcore: registered new interface driver hub
    [ 0.804032] usbcore: registered new device driver usb
    [ 0.804145] SCSI subsystem initialized
    [ 0.804718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.805817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.805956] ohci-pci: OHCI PCI platform driver
    [ 0.806132] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 0.806149] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
    [ 0.806197] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 0.808453] ehci-pci: EHCI PCI platform driver
    [ 0.810692] FDC 0 is a post-1991 82077
    [ 0.810859] libata version 3.00 loaded.
    [ 0.811723] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [ 0.811823] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 0.812133] scsi0 : pata_jmicron
    [ 0.812212] scsi1 : pata_jmicron
    [ 0.812251] ata1: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
    [ 0.812253] ata2: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
    [ 0.860877] hub 1-0:1.0: USB hub found
    [ 0.860890] hub 1-0:1.0: 2 ports detected
    [ 0.861158] ohci-pci 0000:00:13.1: OHCI PCI host controller
    [ 0.861166] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
    [ 0.861205] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 0.917507] hub 2-0:1.0: USB hub found
    [ 0.917518] hub 2-0:1.0: 2 ports detected
    [ 0.917709] ohci-pci 0000:00:13.2: OHCI PCI host controller
    [ 0.917715] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
    [ 0.917744] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 0.974160] hub 3-0:1.0: USB hub found
    [ 0.974171] hub 3-0:1.0: 2 ports detected
    [ 0.974357] ohci-pci 0000:00:13.3: OHCI PCI host controller
    [ 0.974364] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
    [ 0.974382] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.030833] hub 4-0:1.0: USB hub found
    [ 1.030843] hub 4-0:1.0: 2 ports detected
    [ 1.031028] ohci-pci 0000:00:13.4: OHCI PCI host controller
    [ 1.031034] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
    [ 1.031049] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.087499] hub 5-0:1.0: USB hub found
    [ 1.087509] hub 5-0:1.0: 2 ports detected
    [ 1.190024] usb 1-1: new low-speed USB device number 2 using ohci-pci
    [ 1.483353] usb 1-2: new low-speed USB device number 3 using ohci-pci
    [ 1.643840] usb 1-1: USB disconnect, device number 2
    [ 1.644033] usb 1-2: USB disconnect, device number 3
    [ 1.760279] ehci-pci 0000:00:13.5: EHCI Host Controller
    [ 1.760288] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
    [ 1.760297] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.760313] ehci-pci 0000:00:13.5: debug port 1
    [ 1.760381] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.770022] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.770182] hub 6-0:1.0: USB hub found
    [ 1.770191] hub 6-0:1.0: 10 ports detected
    [ 1.826731] hub 1-0:1.0: USB hub found
    [ 1.826742] hub 1-0:1.0: 2 ports detected
    [ 1.828066] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.828580] usbcore: registered new interface driver usbhid
    [ 1.828583] usbhid: USB HID core driver
    [ 1.883417] hub 2-0:1.0: USB hub found
    [ 1.883431] hub 2-0:1.0: 2 ports detected
    [ 1.940057] hub 3-0:1.0: USB hub found
    [ 1.940067] hub 3-0:1.0: 2 ports detected
    [ 1.996722] hub 4-0:1.0: USB hub found
    [ 1.996732] hub 4-0:1.0: 2 ports detected
    [ 2.053388] hub 5-0:1.0: USB hub found
    [ 2.053398] hub 5-0:1.0: 2 ports detected
    [ 2.053683] ahci 0000:00:12.0: version 3.0
    [ 2.053835] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 2.053933] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 2.053937] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 2.054699] scsi2 : ahci
    [ 2.054775] scsi3 : ahci
    [ 2.054850] scsi4 : ahci
    [ 2.054920] scsi5 : ahci
    [ 2.054967] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 2.054971] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 2.054974] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 2.054977] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 2.056192] scsi6 : pata_atiixp
    [ 2.056251] scsi7 : pata_atiixp
    [ 2.056292] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 2.056294] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 2.066728] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 2.066733] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 2.067129] scsi8 : ahci
    [ 2.067200] scsi9 : ahci
    [ 2.067257] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19
    [ 2.067260] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19
    [ 2.213828] ata7.00: ATAPI: HL-DT-ST RW/DVD GCC-4481B, 1.04, max UDMA/33
    [ 2.227109] ata7.00: configured for UDMA/33
    [ 2.373413] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.386722] ata9: SATA link down (SStatus 0 SControl 300)
    [ 2.386768] ata10: SATA link down (SStatus 0 SControl 300)
    [ 2.540027] ata3: softreset failed (device not ready)
    [ 2.540185] ata3: applying PMP SRST workaround and retrying
    [ 2.540217] ata5: softreset failed (device not ready)
    [ 2.540381] ata5: applying PMP SRST workaround and retrying
    [ 2.540408] ata4: softreset failed (device not ready)
    [ 2.540563] ata4: applying PMP SRST workaround and retrying
    [ 2.566689] usb 1-1: new low-speed USB device number 4 using ohci-pci
    [ 2.706711] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.706750] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.706786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.707572] ata3.00: ATA-7: ST3200826AS, 3.03, max UDMA/133
    [ 2.707575] ata3.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 2.707578] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.708066] ata4.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
    [ 2.708068] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.708070] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.708443] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.708445] ata3.00: configured for UDMA/133
    [ 2.708626] scsi 2:0:0:0: Direct-Access ATA ST3200826AS 3.03 PQ: 0 ANSI: 5
    [ 2.709433] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.709436] ata4.00: configured for UDMA/133
    [ 2.709543] scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 MX4O PQ: 0 ANSI: 5
    [ 2.709897] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
    [ 2.709940] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2.709942] sd 3:0:0:0: [sdb] 4096-byte physical blocks
    [ 2.710054] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.710057] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.710081] sd 3:0:0:0: [sdb] Write Protect is off
    [ 2.710083] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.710108] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.710131] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.713184] ata5.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
    [ 2.713188] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 2.713191] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.716937] sdb: sdb1
    [ 2.717244] sd 3:0:0:0: [sdb] Attached SCSI disk
    [ 2.719680] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.719683] ata5.00: configured for UDMA/133
    [ 2.719828] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
    [ 2.720076] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.720133] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.720136] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.720160] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.721044] scsi 6:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4481B 1.04 PQ: 0 ANSI: 5
    [ 2.723354] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.723359] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.723609] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [ 2.726375] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
    [ 2.726661] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 2.726858] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 2.727057] ata5.00: failed command: READ FPDMA QUEUED
    [ 2.727277] ata5.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
    res 40/00:04:00:00:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 2.728116] ata5.00: status: { DRDY }
    [ 2.728231] ata5: hard resetting link
    [ 2.736521] sda: sda1 sda2 < sda5 >
    [ 2.736973] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.744047] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/input/input1
    [ 2.744380] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
    [ 2.744812] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.1/input/input2
    [ 2.745088] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
    [ 2.990025] usb 1-2: new low-speed USB device number 5 using ohci-pci
    [ 3.156230] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
    [ 3.156413] hid-generic 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2/input0
    [ 3.213356] ata5: softreset failed (device not ready)
    [ 3.213519] ata5: applying PMP SRST workaround and retrying
    [ 3.380031] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.386448] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 3.392796] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    [ 3.392798] ata5.00: revalidation failed (errno=-5)
    [ 8.380028] ata5: hard resetting link
    [ 8.866697] ata5: softreset failed (device not ready)
    [ 8.866861] ata5: applying PMP SRST workaround and retrying
    [ 9.033366] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 9.039792] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 9.046258] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 9.046260] ata5.00: configured for UDMA/133
    [ 9.046276] ata5: EH complete
    [ 9.052053] sdc: sdc1
    [ 9.052397] sdc: detected capacity change from 0 to 1000204886016
    [ 9.052488] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 9.102207] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
    [ 9.102441] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 9.102622] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 9.102820] ata5.00: failed command: READ FPDMA QUEUED
    [ 9.102979] ata5.00: cmd 60/08:00:a8:6c:70/00:00:74:00:00/40 tag 0 ncq 4096 in
    res 40/00:04:a8:6c:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
    [ 9.103442] ata5.00: status: { DRDY }
    [ 9.103556] ata5: hard resetting link
    [ 9.590022] ata5: softreset failed (device not ready)
    [ 9.590182] ata5: applying PMP SRST workaround and retrying
    [ 9.756697] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 9.763109] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 9.769456] ata5.00: failed to IDENTIFY (I/O error, err_mask=0x100)
    [ 9.769458] ata5.00: revalidation failed (errno=-5)
    [ 9.969270] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.756687] ata5: hard resetting link
    [ 15.243350] ata5: softreset failed (device not ready)
    [ 15.247493] ata5: applying PMP SRST workaround and retrying
    [ 15.413369] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 15.419789] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 15.426253] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 15.426255] ata5.00: configured for UDMA/133
    [ 15.426271] ata5: EH complete
    [ 15.457509] ata5.00: exception Emask 0x50 SAct 0x1 SErr 0x680900 action 0x6 frozen
    [ 15.466153] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 15.470623] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 15.475077] ata5.00: failed command: READ FPDMA QUEUED
    [ 15.479477] ata5.00: cmd 60/08:00:f8:69:70/00:00:74:00:00/40 tag 0 ncq 4096 in
    res 40/00:04:f8:69:70/00:00:74:00:00/40 Emask 0x50 (ATA bus error)
    [ 15.497016] ata5.00: status: { DRDY }
    [ 15.501349] ata5: hard resetting link
    [ 15.986684] ata5: softreset failed (device not ready)
    [ 15.990999] ata5: applying PMP SRST workaround and retrying
    [ 16.156695] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 16.163100] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.169558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.169560] ata5.00: configured for UDMA/133
    [ 16.169567] ata5: EH complete
    [ 16.230439] ata5: limiting SATA link speed to 1.5 Gbps
    [ 16.230445] ata5.00: exception Emask 0x50 SAct 0x1c SErr 0x680900 action 0x6 frozen
    [ 16.239215] ata5.00: irq_stat 0x08000000, interface fatal error
    [ 16.243744] ata5: SError: { UnrecovData HostInt 10B8B BadCRC Handshk }
    [ 16.248330] ata5.00: failed command: READ FPDMA QUEUED
    [ 16.252861] ata5.00: cmd 60/38:10:40:00:00/00:00:00:00:00/40 tag 2 ncq 28672 in
    res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 16.270799] ata5.00: status: { DRDY }
    [ 16.275275] ata5.00: failed command: READ FPDMA QUEUED
    [ 16.279713] ata5.00: cmd 60/f8:18:80:00:00/00:00:00:00:00/40 tag 3 ncq 126976 in
    res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 16.297504] ata5.00: status: { DRDY }
    [ 16.302022] ata5.00: failed command: READ FPDMA QUEUED
    [ 16.306524] ata5.00: cmd 60/88:20:78:01:00/00:00:00:00:00/40 tag 4 ncq 69632 in
    res 40/00:24:78:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
    [ 16.324306] ata5.00: status: { DRDY }
    [ 16.328707] ata5: hard resetting link
    [ 16.813352] ata5: softreset failed (device not ready)
    [ 16.817758] ata5: applying PMP SRST workaround and retrying
    [ 16.983368] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.989783] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.996261] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 16.996263] ata5.00: configured for UDMA/133
    [ 16.996279] ata5: EH complete
    [ 17.672607] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 17.677851] systemd[1]: Set hostname to <ROTATION-STATION>.
    [ 18.109971] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 18.109984] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 18.110330] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 18.110410] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 18.110428] systemd[1]: Expecting device sys-subsystem-net-devices-enp2s0.device...
    [ 18.110443] systemd[1]: Starting Remote File Systems.
    [ 18.110456] systemd[1]: Reached target Remote File Systems.
    [ 18.110468] systemd[1]: Starting Delayed Shutdown Socket.
    [ 18.110505] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 18.110517] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 18.110546] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 18.110558] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 18.110583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 18.110595] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 18.110624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 18.110638] systemd[1]: Starting Encrypted Volumes.
    [ 18.110651] systemd[1]: Reached target Encrypted Volumes.
    [ 18.110664] systemd[1]: Starting Journal Socket.
    [ 18.110711] systemd[1]: Listening on Journal Socket.
    [ 18.110728] systemd[1]: Starting Setup Virtual Console...
    [ 18.138476] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 18.139007] systemd[1]: Mounting Huge Pages File System...
    [ 18.139550] systemd[1]: Starting Journal Service...
    [ 18.140217] systemd[1]: Started Journal Service.
    [ 18.406055] systemd-journald[127]: Vacuuming done, freed 0 bytes
    [ 18.685974] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 18.806623] systemd-udevd[155]: starting version 208
    [ 19.322248] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 19.322309] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 19.331550] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 19.331559] ACPI: Power Button [PWRB]
    [ 19.331882] ACPI: Fan [FAN] (on)
    [ 19.332660] ACPI: [Package] has zero elements (ffff8800bf306e80)
    [ 19.337757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 19.337764] ACPI: Power Button [PWRF]
    [ 19.337878] ACPI: Invalid passive threshold
    [ 19.338149] thermal LNXTHERM:00: registered as thermal_zone0
    [ 19.338151] ACPI: Thermal Zone [THRM] (40 C)
    [ 19.387889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 19.388553] wmi: Mapper loaded
    [ 19.549117] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR2 1 (20130725/utaddress-251)
    [ 19.549126] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 2 (20130725/utaddress-251)
    [ 19.549131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 19.717185] MCE: In-kernel MCE decoding enabled.
    [ 19.733875] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 19.746781] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 19.780737] [drm] Initialized drm 1.1.0 20060810
    [ 19.801750] EDAC MC: Ver: 3.0.0
    [ 19.808239] sky2: driver version 1.30
    [ 19.808388] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 19.808451] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 19.808698] sky2 0000:02:00.0 eth0: addr 00:30:18:a6:19:e3
    [ 19.835294] snd_hda_intel 0000:00:14.2: irq 44 for MSI/MSI-X
    [ 19.870517] AMD64 EDAC driver v3.4.0
    [ 19.895226] microcode: AMD CPU family 0xf not supported
    [ 19.929703] systemd-udevd[156]: renamed network interface eth0 to enp2s0
    [ 20.021077] kvm: Nested Virtualization enabled
    [ 20.073770] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
    [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
    [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
    [ 20.088804] checking generic (f9000000 130000) vs hw (d0000000 10000000)
    [ 20.088805] checking generic (f9000000 130000) vs hw (f8000000 2000000)
    [ 20.088806] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
    [ 20.100569] Console: switching to colour dummy device 80x25
    [ 20.101154] [drm] hdmi device not found 1 0 1
    [ 20.101224] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x086c00a2
    [ 20.101227] nouveau [ DEVICE][0000:01:00.0] Chipset: G86 (NV86)
    [ 20.101229] nouveau [ DEVICE][0000:01:00.0] Family : NV50
    [ 20.101830] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 20.113952] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
    [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
    [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
    [ 20.157989] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    [ 20.158048] sp5100_tco: PCI Revision ID: 0x13
    [ 20.158077] sp5100_tco: failed to find MMIO address, giving up.
    [ 20.162297] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 20.162300] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
    [ 20.162421] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 20.162424] nouveau [ VBIOS][0000:01:00.0] version 60.86.65.00.51
    [ 20.182582] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
    [ 20.182585] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
    [ 20.182586] nouveau [ PFB][0000:01:00.0] ZCOMP: 1292 tags
    [ 20.204429] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 20.204439] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
    [ 20.204442] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 20.204613] [TTM] Zone kernel: Available graphics memory: 2026408 kiB
    [ 20.204615] [TTM] Initializing pool allocator
    [ 20.204619] [TTM] Initializing DMA pool allocator
    [ 20.204630] nouveau [ DRM] VRAM: 512 MiB
    [ 20.204632] nouveau [ DRM] GART: 1048576 MiB
    [ 20.204636] nouveau [ DRM] TMDS table version 2.0
    [ 20.204638] nouveau [ DRM] DCB version 4.0
    [ 20.204641] nouveau [ DRM] DCB outp 00: 01000302 00020030
    [ 20.204644] nouveau [ DRM] DCB outp 01: 02000300 00020028
    [ 20.204646] nouveau [ DRM] DCB outp 02: 02011312 00020030
    [ 20.204648] nouveau [ DRM] DCB outp 03: 04011310 00c0c028
    [ 20.204650] nouveau [ DRM] DCB outp 04: 010223f1 00c0c080
    [ 20.204652] nouveau [ DRM] DCB conn 00: 2030
    [ 20.204655] nouveau [ DRM] DCB conn 01: 1130
    [ 20.204657] nouveau [ DRM] DCB conn 02: 0210
    [ 20.204659] nouveau [ DRM] DCB conn 03: 0211
    [ 20.204660] nouveau [ DRM] DCB conn 04: 0213
    [ 20.210863] nouveau W[ DRM] failed to create encoder 0/1/0: -19
    [ 20.210865] nouveau W[ DRM] TV-1 has no encoders, removing
    [ 20.210895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 20.210897] [drm] No driver support for vblank timestamp query.
    [ 20.211027] nouveau [ DRM] 1 available performance level(s)
    [ 20.211031] nouveau [ DRM] 0: core 500MHz shader 1250MHz memory 400MHz fanspeed 100%
    [ 20.211033] nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1320mV
    [ 20.214375] ppdev: user-space parallel port driver
    [ 20.218673] nouveau [ DRM] MM: using CRYPT for buffer copies
    [ 20.270146] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
    [ 20.276729] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
    [ 20.276801] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
    [ 20.276871] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
    [ 20.276937] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 20.277003] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 20.277072] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 20.277146] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 20.288590] nouveau [ DRM] allocated 1680x1050 fb: 0x70000, bo ffff88013974c000
    [ 20.288622] EDAC amd64: DRAM ECC disabled.
    [ 20.288629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 20.288675] fbcon: nouveaufb (fb0) is primary device
    [ 20.376049] Console: switching to colour frame buffer device 128x48
    [ 20.376338] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [ 20.376340] nouveau 0000:01:00.0: registered panic notifier
    [ 20.376346] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
    [ 20.568688] Adding 2500432k swap on /dev/sda5. Priority:-1 extents:1 across:2500432k FS
    [ 20.811563] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 20.855298] systemd-journald[127]: Received request to flush runtime journal from PID 1
    [ 22.153827] sky2 0000:02:00.0 enp2s0: enabling interface
    [ 22.153887] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 24.883373] sky2 0000:02:00.0 enp2s0: Link is up at 1000 Mbps, full duplex, flow control both
    [ 24.883402] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 102.400031] ata4.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen
    [ 102.400038] ata4.00: failed command: READ FPDMA QUEUED
    [ 102.400044] ata4.00: cmd 60/c8:08:40:0e:00/00:00:94:00:00/40 tag 1 ncq 102400 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 102.400046] ata4.00: status: { DRDY }
    [ 102.400051] ata4: hard resetting link
    [ 102.933349] ata4: softreset failed (device not ready)
    [ 102.933356] ata4: applying PMP SRST workaround and retrying
    [ 103.100029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 103.101156] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 103.102323] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 103.102326] ata4.00: configured for UDMA/133
    [ 103.102330] ata4.00: device reported invalid CHS sector 0
    [ 103.102340] sd 3:0:0:0: [sdb]
    [ 103.102342] Result: hostbyte=0x00 driverbyte=0x08
    [ 103.102344] sd 3:0:0:0: [sdb]
    [ 103.102345] Sense Key : 0xb [current] [descriptor]
    [ 103.102348] Descriptor sense data with sense descriptors (in hex):
    [ 103.102349] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 103.102355] 00 00 00 00
    [ 103.102358] sd 3:0:0:0: [sdb]
    [ 103.102359] ASC=0x0 ASCQ=0x0
    [ 103.102361] sd 3:0:0:0: [sdb] CDB:
    [ 103.102363] cdb[0]=0x28: 28 00 94 00 0e 40 00 00 c8 00
    [ 103.102369] end_request: I/O error, dev sdb, sector 2483031616
    [ 103.102415] ata4: EH complete
    [ 103.157724] EXT4-fs error (device sdb1): __ext4_get_inode_loc:3917: inode #77597314: block 310378696: comm Plex Media Serv: unable to read itable block
    [ 133.386698] ata4.00: exception Emask 0x0 SAct 0x1ffffe0 SErr 0x0 action 0x6 frozen
    [ 133.386706] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386711] ata4.00: cmd 60/08:28:70:0e:00/00:00:94:00:00/40 tag 5 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386714] ata4.00: status: { DRDY }
    [ 133.386716] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386721] ata4.00: cmd 60/08:30:78:0e:00/00:00:94:00:00/40 tag 6 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386723] ata4.00: status: { DRDY }
    [ 133.386725] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386729] ata4.00: cmd 60/08:38:80:0e:00/00:00:94:00:00/40 tag 7 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386731] ata4.00: status: { DRDY }
    [ 133.386733] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386738] ata4.00: cmd 60/08:40:88:0e:00/00:00:94:00:00/40 tag 8 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386740] ata4.00: status: { DRDY }
    [ 133.386742] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386746] ata4.00: cmd 60/08:48:90:0e:00/00:00:94:00:00/40 tag 9 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386748] ata4.00: status: { DRDY }
    [ 133.386750] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386755] ata4.00: cmd 60/08:50:98:0e:00/00:00:94:00:00/40 tag 10 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 133.386757] ata4.00: status: { DRDY }
    [ 133.386759] ata4.00: failed command: READ FPDMA QUEUED
    [ 133.386763] ata4.00: cmd 60/08:58:a0:0e:00/00:00:94:00:00/40 tag 11 ncq 4096 in
    res 40/00:00:00:00:00/00:00:

  • Mail links do not open in Safari automatically

    Problem started today, when I click on a link in an email, the link does not open in Safari, repaired disk permissions, restarted mail and safari, Safari is the default browser, restarted MacBook Pro a few times, not working. Any ideas?
    Cowboy Bill

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Disk Utility Crashing - Dyld error

    This is a FYI for a problem I solved...
    Symptoms: Disk utility would crash when opened (crash report below).
    Also opening hwmond or emond from terminal resulted in this error:
    Referenced from: /usr/sbin/hwmond
      Reason: no suitable image found.  Did find:
              /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Ver sions/A/PlatformHardwareManagement: no matching architecture in universal wrapper
    Trace/BPT trap: 5
    The fix I found was to remove "/System/Library/PrivateFrameworks/PlatformHardwareManagement.framework" and restore a fresh copy from OSInstall.mpkg (found within the OS X installer) using Pacifist.  I had to resort to this because re-applying the latest OS X combo update didn't fix it.  Neither did resetting dyld cache or repair permissions. I'm not sure why the PlatformHardwareManagement framework broke....  But after replacing that framework Disk Utility is launching fine now. I thought I'd post this in case others are googing a similar error.  Hope this helps!
    Disk Utility crash report (shortened)
    Process:         Disk Utility [368]
    Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier:      com.apple.DiskUtility
    Version:         12 (346)
    Build Info:      DiskUtility-346000000000000~225
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [206]
    Date/Time:       2011-11-16 13:00:30.331 -0800
    OS Version:      Mac OS X Server 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          113 sec
    Crashes Since Last Report:           35
    Per-App Crashes Since Last Report:   4
    Anonymous UUID:                      280A4971-2E24-4B18-A5E5-2DB90E5AE1F5
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
      Referenced from: /System/Library/PrivateFrameworks/ServerFoundation.framework/Versions/A/ServerF oundation
      Reason: no suitable image found.  Did find:
              /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Ver sions/A/PlatformHardwareManagement: no matching architecture in universal wrapper
    ::snip::
    Console errors:
    11/18/11 10:32:29.642 AM com.apple.emond: dyld: Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
    11/18/11 10:32:29.642 AM com.apple.emond:   Referenced from: /System/Library/PrivateFrameworks/ServerFoundation.framework/Versions/A/ServerF oundation
    11/18/11 10:32:29.642 AM com.apple.emond:   Reason: no suitable image found.  Did find:
    11/18/11 10:32:29.642 AM com.apple.emond:           /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Ver sions/A/PlatformHardwareManagement: no matching architecture in universal wrapper
    11/18/11 10:32:30.179 AM com.apple.hwmond: dyld: Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
    11/18/11 10:32:30.179 AM com.apple.hwmond:   Referenced from: /usr/sbin/hwmond
    11/18/11 10:32:30.179 AM com.apple.hwmond:   Reason: no suitable image found.  Did find:
    11/18/11 10:32:30.179 AM com.apple.hwmond:           /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Ver sions/A/PlatformHardwareManagement: no matching architecture in universal wrapper
    11/18/11 10:32:30.223 AM com.apple.launchd: (com.apple.emond[4707]) Job appears to have crashed: Trace/BPT trap: 5
    11/18/11 10:32:30.223 AM com.apple.launchd: (com.apple.emond) Throttling respawn: Will start in 10 seconds

    As Doug has said, & indeed you have tried....you need to run diskutility from the OS install disk. Or more accurately, you need to run diskutility when booted from the install disk.
    The following ( from diskutility help) should explain it clearly.
    Start up your computer using another disk.
    To use the Install Mac OS X disc, insert the disc and restart your computer holding down the Option key, then select the Install Mac OS X disc and click the arrow.
    Open Disk Utility.
    If you're using the Mac OS X Install disk, follow the onscreen instructions until the menu bar appears with the Utilities menu in it., and then choose Utilities > Open Disk Utility.
    Select the startup disk in the list of disks and volumes, then click First Aid.
    Check the S.M.A.R.T. Status at the bottom of the window. If you can't see it, be sure you selected the hard disk your volume is on, and not the volume itself.
    If the S.M.A.R.T. Status is "About to Fail," back up your files on the disk as soon as possible and replace the disk.
    If the S.M.A.R.T. Status is "Verified" or "Not supported," click Repair Disk to repair the disk.
    If Disk Utility tells you to look for links to corrupt files in the DamagedFiles directory, two or more files occupy the same space on your hard disk and at least one of them is likely to be corrupt. Examine each affected file in the DamagedFiles folder, which at the top-level of the affected disk. If you can replace it or recreate the file, delete it. If it contains necessary information, open it and examine its data to make sure it has not been corrupted.
    If Disk Utility reports "The underlying task reported failure," Disk Utility encountered a problem it could not repair. Back up as much of your data as possible, reformat your disk, reinstall Mac OS X, and restore your backed up data.

  • T410s Fan Error on Boot but works sometime...really confused

    Hi, I bought the t410s back in 2010 april or march. About 7-8 month later, I started getting Fan Error on boot after the thinkpad screen. If I don't do anything, the computer shuts off automatically, but if I hit escape, it would continue boot and start up (without a working fan).  I know that there are other threads about the fan error but none of them mentioned this. Most of the times after it continue booting after escape on fan error, I would do a cold reboot and the Fan Error would be gone. So Im guessing that the hardware is fine because if they faulty, then it shouldn't work at all. So recently, I did a clean install of windows 7 and updated all drivers and bios. After update, it was working for like 4 days so I thought it was just a software issue but now the problem have returned, same as before. Sometimes it boot with fan error, sometime no error. And after shows fan error, if I escape and reboot, most of the time the error would be gone. Anyone know why this is or what is going on here? Anything would be appreciated, thanks.

    hey dy58,
    since it is hard to replicate this issue as sometimes it does happen and sometimes it does not, i do recommend bringing the unit to an authorize service center for them to investigate.
    do contact the tech support team for information of the nearest service center
    http://support.lenovo.com
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Hello could you please help me ? I have this error message when Safari closes suddenly Process:         WebProcess [294] Path:            /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcess Identifier:

    Hello could you please help me ? I have this error message when Safari closes suddenly
    Thank you very much
    Laure from France
    Process:         WebProcess [3654]
    Path: /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcess
    Identifier:      com.apple.WebProcess
    Version:         7537 (7537.78.2)
    Build Info:      WebKit2-7537078002000000~1
    Code Type:       X86-64 (Native)
    Parent Process: ??? [1]
    Date/Time:       2015-02-05 20:31:58.081 +0100
    OS Version:      Mac OS X 10.7.5 (11G63b)
    Report Version: 9
    Interval Since Last Report:          129662 sec
    Crashes Since Last Report:           13
    Per-App Interval Since Last Report:  124632 sec
    Per-App Crashes Since Last Report:   13
    Anonymous UUID: 41A214B3-CFF4-45E0-B032-B4AAA9C216C2
    Crashed Thread: 0  Dispatch queue: com.apple.main-thread
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000022
    VM Regions Near 0x22:
    -->
    __TEXT 000000010bf9c000-000000010bf9f000 [   12K] r-x/rwx SM=COW  /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcess
    Application Specific Information:
    objc[3654]: garbage collection is OFF
    Bundle controller class:
    BrowserBundleController
    Process Model:
    Single Web Process
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0 com.apple.JavaScriptCore                  0x000000010c6b24c6 JSC::Interpreter::unwindCallFrame(JSC::ExecState*&, JSC::JSValue, unsigned int&, JSC::CodeBlock*&) + 278
    1 com.apple.JavaScriptCore                  0x000000010c55b88c JSC::Interpreter::throwException(JSC::ExecState*&, JSC::JSValue&, unsigned int) + 2620
    2 com.apple.JavaScriptCore                  0x000000010c55adf0 JSC::jitThrow(JSC::VM*, JSC::ExecState*, JSC::JSValue, JSC::ReturnAddressPtr) + 80
    3 com.apple.JavaScriptCore 0x000000010c55ad84 cti_vm_throw + 36
    4 com.apple.JavaScriptCore                  0x000000010c55ad50 ctiVMThrowTrampoline + 8
    5 com.apple.JavaScriptCore                  0x000000010c4cabad JSC::Interpreter::executeCall(JSC::ExecState*, JSC::JSObject*, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 605
    6 com.apple.JavaScriptCore                  0x000000010c4ca945 JSC::call(JSC::ExecState*, JSC::JSValue, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 69
    7 com.apple.JavaScriptCore                  0x000000010c6a42d5 JSC::boundFunctionCall(JSC::ExecState*) + 549
    8 ??? 0x00005d519e801045 0 + 102605132927045
    9 com.apple.JavaScriptCore                  0x000000010c4cabad JSC::Interpreter::executeCall(JSC::ExecState*, JSC::JSObject*, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 605
    10 com.apple.JavaScriptCore                  0x000000010c4ca945 JSC::call(JSC::ExecState*, JSC::JSValue, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 69
    11 com.apple.JavaScriptCore                  0x000000010c6a42d5 JSC::boundFunctionCall(JSC::ExecState*) + 549
    12  ??? 0x00005d519e801045 0 + 102605132927045
    13 com.apple.JavaScriptCore                  0x000000010c4cabad JSC::Interpreter::executeCall(JSC::ExecState*, JSC::JSObject*, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 605
    14 com.apple.JavaScriptCore                  0x000000010c4ca945 JSC::call(JSC::ExecState*, JSC::JSValue, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 69
    15 com.apple.WebCore 0x000000010cb0405a WebCore::JSMainThreadExecState::call(JSC::ExecState*, JSC::JSValue, JSC::CallType, JSC::CallData const&, JSC::JSValue, JSC::ArgList const&) + 154
    16 com.apple.WebCore 0x000000010cb48222 WebCore::ScheduledAction::executeFunctionInContext(JSC::JSGlobalObject*, JSC::JSValue, WebCore::ScriptExecutionContext*) + 450
    17 com.apple.WebCore 0x000000010cb47f87 WebCore::ScheduledAction::execute(WebCore::Document*) + 151
    18 com.apple.WebCore 0x000000010cb47d10 WebCore::DOMTimer::fired() + 304
    19 com.apple.WebCore 0x000000010c91091f WebCore::ThreadTimers::sharedTimerFiredInternal() + 175
    20 com.apple.WebCore 0x000000010c9107fa _ZN7WebCoreL10timerFiredEP16__CFRunLoopTimerPv + 58
    21 com.apple.CoreFoundation                  0x00007fff8da58934 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
    22 com.apple.CoreFoundation                  0x00007fff8da58486 __CFRunLoopDoTimer + 534
    23 com.apple.CoreFoundation                  0x00007fff8da38e11 __CFRunLoopRun + 1617
    24 com.apple.CoreFoundation                  0x00007fff8da38486 CFRunLoopRunSpecific + 230
    25 com.apple.HIToolbox                       0x00007fff977e92bf RunCurrentEventLoopInMode + 277
    26 com.apple.HIToolbox                       0x00007fff977f056d ReceiveNextEventCommon + 355
    27 com.apple.HIToolbox                       0x00007fff977f03fa BlockUntilNextEventMatchingListInMode + 62
    28 com.apple.AppKit 0x00007fff99736779 _DPSNextEvent + 659
    29 com.apple.AppKit 0x00007fff9973607d -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
    30 com.apple.AppKit 0x00007fff997329b9 -[NSApplication run] + 470
    31 com.apple.WebKit2 0x000000010c1663f6 int WebKit::ChildProcessMain<WebKit::WebProcess, WebKit::WebContentProcessMainDelegate>(int, char**) + 724
    32 com.apple.WebProcess                      0x000000010bf9db7f 0x10bf9c000 + 7039
    33 com.apple.WebProcess                      0x000000010bf9da78 0x10bf9c000 + 6776
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0 libsystem_kernel.dylib                    0x00007fff98bd57e6 kevent + 10
    1 libdispatch.dylib 0x00007fff92a27786 _dispatch_mgr_invoke + 923
    2 libdispatch.dylib 0x00007fff92a26316 _dispatch_mgr_thread + 54
    Thread 2:: JavaScriptCore::BlockFree
    0 libsystem_kernel.dylib                    0x00007fff98bd4bca __psynch_cvwait + 10
    1 libsystem_c.dylib 0x00007fff9775b274 _pthread_cond_wait + 840
    2 com.apple.JavaScriptCore                  0x000000010c465606 ***::ThreadCondition::timedWait(***::Mutex&, double) + 118
    3 com.apple.JavaScriptCore                  0x000000010c465125 JSC::BlockAllocator::blockFreeingThreadMain() + 117
    4 com.apple.JavaScriptCore                  0x000000010c45aa2f _ZN3WTFL19wtfThreadEntryPointEPv + 15
    5 libsystem_c.dylib 0x00007fff977578bf _pthread_start + 335
    6 libsystem_c.dylib 0x00007fff9775ab75 thread_start + 13
    Thread 3:: JavaScriptCore::Marking
    0 libsystem_kernel.dylib                    0x00007fff98bd4bca __psynch_cvwait + 10
    1 libsystem_c.dylib 0x00007fff9775b274 _pthread_cond_wait + 840
    2 com.apple.JavaScriptCore                  0x000000010c465c37 JSC::GCThread::waitForNextPhase() + 119
    3 com.apple.JavaScriptCore                  0x000000010c465ac8 JSC::GCThread::gcThreadMain() + 88
    4 com.apple.JavaScriptCore                  0x000000010c45aa2f _ZN3WTFL19wtfThreadEntryPointEPv + 15
    5 libsystem_c.dylib 0x00007fff977578bf _pthread_start + 335
    6 libsystem_c.dylib 0x00007fff9775ab75 thread_start + 13
    Thread 4:: JavaScriptCore::Marking
    0 libsystem_kernel.dylib                    0x00007fff98bd4bca __psynch_cvwait + 10
    1 libsystem_c.dylib 0x00007fff9775b274 _pthread_cond_wait + 840
    2 com.apple.JavaScriptCore                  0x000000010c465c37 JSC::GCThread::waitForNextPhase() + 119
    3 com.apple.JavaScriptCore                  0x000000010c465ac8 JSC::GCThread::gcThreadMain() + 88
    4 com.apple.JavaScriptCore                  0x000000010c45aa2f _ZN3WTFL19wtfThreadEntryPointEPv + 15
    5 libsystem_c.dylib 0x00007fff977578bf _pthread_start + 335
    6 libsystem_c.dylib 0x00007fff9775ab75 thread_start + 13
    Thread 5:: JavaScriptCore::Marking
    0 libsystem_kernel.dylib                    0x00007fff98bd4bca __psynch_cvwait + 10
    1 libsystem_c.dylib 0x00007fff9775b274 _pthread_cond_wait + 840
    2 com.apple.JavaScriptCore                  0x000000010c465c37 JSC::GCThread::waitForNextPhase() + 119
    3 com.apple.JavaScriptCore                  0x000000010c465ac8 JSC::GCThread::gcThreadMain() + 88
    4 com.apple.JavaScriptCore                  0x000000010c45aa2f _ZN3WTFL19wtfThreadEntryPointEPv + 15
    5 libsystem_c.dylib 0x00007fff977578bf _pthread_start + 335
    6 libsystem_c.dylib 0x00007fff9775ab75 thread_start + 13
    Thread 6:: com.apple.NSURLConnectionLoader
    0 libsystem_kernel.dylib                    0x00007fff98bd367a mach_msg_trap + 10
    1 libsystem_kernel.dylib                    0x00007fff98bd2d71 mach_msg + 73
    2 com.apple.CoreFoundation                  0x00007fff8da3050c __CFRunLoopServiceMachPort + 188
    3 com.apple.CoreFoundation                  0x00007fff8da38c74 __CFRunLoopRun + 1204
    4 com.apple.CoreFoundation                  0x00007fff8da38486 CFRunLoopRunSpecific + 230
    5 com.apple.Foundation                      0x00007fff96a17fd7 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 335
    6 com.apple.Foundation                      0x00007fff96a0c72a -[NSThread main] + 68
    7 com.apple.Foundation                      0x00007fff96a0c6a2 __NSThread__main__ + 1575
    8 libsystem_c.dylib 0x00007fff977578bf _pthread_start + 335
    9 libsystem_c.dylib 0x00007fff9775ab75 thread_start + 13
    Thread 7:: com.apple.CFSocket.private
    0 libsystem_kernel.dylib                    0x00007fff98bd4df2 __select + 10
    1 com.apple.CoreFoundation                  0x00007fff8da81c8b __CFSocketManager + 1355
    2 libsystem_c.dylib 0x00007fff977578bf _pthread_start + 335
    3 libsystem_c.dylib 0x00007fff9775ab75 thread_start + 13
    Thread 8:
    0 libsystem_kernel.dylib                    0x00007fff98bd5192 __workq_kernreturn + 10
    1 libsystem_c.dylib 0x00007fff97759594 _pthread_wqthread + 758
    2 libsystem_c.dylib 0x00007fff9775ab85 start_wqthread + 13
    Thread 9:
    0 libsystem_kernel.dylib                    0x00007fff98bd5192 __workq_kernreturn + 10
    1 libsystem_c.dylib 0x00007fff97759594 _pthread_wqthread + 758
    2 libsystem_c.dylib 0x00007fff9775ab85 start_wqthread + 13
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x000000000000000a  rbx: 0x00000001108013a0  rcx: 0x00000001108013a0  rdx: 0x0000000000000000
      rdi: 0x0000000110df6c70  rsi: 0x00007fff6bb99c10  rbp: 0x00007fff6bb99ab0  rsp: 0x00007fff6bb99a60
       r8: 0x00007fff6bb99b58   r9: 0x0000000000000007  r10: 0x00000001193ed2c0  r11: 0x0000000018ead264
      r12: 0x00007fff6bb99c10  r13: 0x000000011ebfd0e8  r14: 0x00007fff6bb99b58  r15: 0x0000000000000000
      rip: 0x000000010c6b24c6  rfl: 0x0000000000010206  cr2: 0x0000000000000022
    Logical CPU: 2
    Binary Images:
           0x10bf9c000 - 0x10bf9efff com.apple.WebProcess (7537 - 7537.78.2) <5269CEC1-9274-3E9E-8A45-D37D71DA2740> /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcess
           0x10bfa5000 - 0x10bfa7fff WebProcessShim.dylib (537.78.2 - compatibility 1.0.0) <671EB68B-516D-3AFC-BFE9-71453DD25E6E> /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcessShim.dylib
           0x10bfae000 - 0x10bfaffff com.apple.VideoDecodeAcceleration (1.1 - 8) <1D15AB26-DEDD-37A8-91F4-0A86F87BDE52> /System/Library/Frameworks/VideoDecodeAcceleration.framework/Versions/A/VideoDe codeAcceleration
           0x10c014000 - 0x10c27dff7 com.apple.WebKit2 (7537 - 7537.78.2) <BF0D7E05-0F7B-3791-B83B-EB5D6B989D28> /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebKit2
           0x10c451000 - 0x10c7f8ff7 com.apple.JavaScriptCore (7537 - 7537.78.1) <2EB02387-CA74-346C-9D51-D1E0C405FFF4> /System/Library/StagedFrameworks/Safari/JavaScriptCore.framework/JavaScriptCore
           0x10c8e7000 -        0x10d994fff  com.apple.WebCore (7537 - 7537.78.1) <20E51224-E7C0-3B3C-AEE8-EB11D6786C42> /System/Library/StagedFrameworks/Safari/WebCore.framework/WebCore
           0x10fb62000 - 0x11009bfff com.apple.Safari.framework (7537 - 7537.78.2) <1104F16E-0307-3450-BF85-4C6D65C22F24> /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
           0x1103f9000 - 0x11055dff7 com.apple.WebKit (7537 - 7537.78.2) <B54EE9C4-F4F0-3424-A658-830FE814F167> /System/Library/StagedFrameworks/Safari/WebKit.framework/WebKit
           0x112619000 - 0x11261afff  ATSHI.dylib (??? - ???) <4761FD60-26EE-30C6-89FB-A3149852477F> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/ATSHI.dylib
           0x112c72000 - 0x112c75ff7 libCoreFSCache.dylib (??? - ???) <0D155750-7910-32C5-8327-924FC1089442> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreFSCache .dylib
           0x114edd000 - 0x114eebfff libGPUSupport.dylib (??? - ???) <9FF8DDA2-7CB1-3888-8AAE-227C7691CB98> /System/Library/PrivateFrameworks/GPUSupport.framework/Versions/A/Libraries/lib GPUSupport.dylib
           0x114ef2000 - 0x114f20ff7  GLRendererFloat (??? - ???) <06CA5D0B-BC5F-3CC7-836D-A02F7DB92BE8> /System/Library/Frameworks/OpenGL.framework/Resources/GLRendererFloat.bundle/GL RendererFloat
           0x114f29000 - 0x114f33fef libcldcpuengine.dylib (2.0.19 - compatibility 1.0.0) <4572AD1E-D1D1-3412-AFCC-D37037B1FAB5> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/libcldcpuengin e.dylib
           0x11f080000 - 0x11f0a9fff libPDFRIP.A.dylib (600.0.0 - compatibility 64.0.0) <B10E6E73-F1CC-3C0A-971F-68F1E0B0C3AC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
           0x12704d000 - 0x127205fff  GLEngine (??? - ???) <59179FEC-D0E2-38B3-BD49-765506A645AC> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
           0x12723c000 - 0x127396fff libGLProgrammability.dylib (??? - ???) <90390984-70BC-365C-AB3E-16C35C4240CB> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
           0x1273c8000 - 0x1277affe7 com.apple.driver.AppleIntelHD3000GraphicsGLDriver (7.32.12 - 7.3.2) <5C9C9474-BA99-33A6-BAD8-628224491FED> /System/Library/Extensions/AppleIntelHD3000GraphicsGLDriver.bundle/Contents/Mac OS/AppleIntelHD3000GraphicsGLDriver
    0x7fff6bb9c000 - 0x7fff6bbd0baf  dyld (195.6 - ???) <0CD1B35B-A28F-32DA-B72E-452EAD609613> /usr/lib/dyld
    0x7fff8d880000 - 0x7fff8d88dfff com.apple.CrashReporterSupport (10.7.4 - 353) <6044CFB6-939E-3C73-BFBB-A8BBC096F135> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
    0x7fff8d88e000 - 0x7fff8d892ff7 com.apple.CommonPanels (1.2.5 - 94) <37C6540B-F8D1-355A-806C-F93D8FB522AB> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x7fff8d8c4000 - 0x7fff8d9cefe7 libcrypto.0.9.8.dylib (0.9.8 - compatibility 0.9.8) <0E7A4F63-035E-3406-AE8C-8F9E3E47D2EE> /usr/lib/libcrypto.0.9.8.dylib
    0x7fff8d9d2000 -     0x7fff8d9fffe7  libSystem.B.dylib (159.1.0 - compatibility 1.0.0) <7BEBB139-50BB-3112-947A-F4AA168F991C> /usr/lib/libSystem.B.dylib
    0x7fff8da00000 - 0x7fff8dbd4ff7 com.apple.CoreFoundation (6.7.2 - 635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff8dbd5000 - 0x7fff8e008ff7 com.apple.VideoToolbox (1.0 - 705.94) <72AD524C-0616-3C69-BA1F-8D444F97F5A2> /System/Library/PrivateFrameworks/VideoToolbox.framework/Versions/A/VideoToolbo x
    0x7fff8e009000 - 0x7fff8e032ff7 com.apple.framework.Apple80211 (7.4.1 - 741.1) <F60DA830-84ED-3473-8DE8-611A9D9B56FF> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    0x7fff8e219000 - 0x7fff8e241fff com.apple.PerformanceAnalysis (1.11 - 11) <8D4C6382-DD92-37A2-BCFC-E89951320848> /System/Library/PrivateFrameworks/PerformanceAnalysis.framework/Versions/A/Perf ormanceAnalysis
    0x7fff8e242000 - 0x7fff8e25eff7 com.apple.GenerationalStorage (1.0 - 126.1) <509F52ED-E54B-3FEF-B3C2-759387B826E6> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
    0x7fff8e25f000 - 0x7fff8e262ff7 com.apple.securityhi (4.0 - 1) <7146CB8E-B754-3B0E-A74E-77E9138A81C5> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x7fff8e263000 - 0x7fff8e268ff7 libsystem_network.dylib (??? - ???) <5DE7024E-1D2D-34A2-80F4-08326331A75B> /usr/lib/system/libsystem_network.dylib
    0x7fff8e269000 - 0x7fff8e280fff com.apple.CFOpenDirectory (10.7 - 146) <E71AE4A2-F72B-35F2-9043-9F45CF75F11A> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
    0x7fff8e281000 - 0x7fff8e2c8ff7 com.apple.CoreMedia (1.0 - 705.94) <700C6863-7A8F-34FA-8B1D-7659EC95000B> /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
    0x7fff8e2c9000 - 0x7fff8e2cdfff libmathCommon.A.dylib (2026.0.0 - compatibility 1.0.0) <FF83AFF7-42B2-306E-90AF-D539C51A4542> /usr/lib/system/libmathCommon.A.dylib
    0x7fff8e2ce000 - 0x7fff8e31fff7 com.apple.CoreMediaIO (216.0 - 3199.8) <4D3FE512-E943-34E3-A7A5-2EC2E3854E28> /System/Library/Frameworks/CoreMediaIO.framework/Versions/A/CoreMediaIO
    0x7fff8e320000 - 0x7fff8e326fff  IOSurface (??? - ???) <77C6757B-D357-3E34-9424-48F962B5CC9C> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
    0x7fff8e34f000 - 0x7fff8e3a2fff  com.apple.AppleVAFramework (5.0.16 - 5.0.16) <6F9A4BCE-8B99-3144-BCF7-B4299B27F6E9> /System/Library/PrivateFrameworks/AppleVA.framework/Versions/A/AppleVA
    0x7fff8e3a3000 - 0x7fff8e3a5fff libquarantine.dylib (36.7.0 - compatibility 1.0.0) <8D9832F9-E4A9-38C3-B880-E5210B2353C7> /usr/lib/system/libquarantine.dylib
    0x7fff8e3a6000 - 0x7fff8e3a6fff libOpenScriptingUtil.dylib (??? - ???) <A7847713-F410-39C0-884F-A7188A18E742> /usr/lib/libOpenScriptingUtil.dylib
    0x7fff8e3a7000 - 0x7fff8e3a8ff7  libsystem_blocks.dylib (53.0.0 - compatibility 1.0.0) <8BCA214A-8992-34B2-A8B9-B74DEACA1869> /usr/lib/system/libsystem_blocks.dylib
    0x7fff8e427000 - 0x7fff8e427fff com.apple.Carbon (153 - 153) <C1A30E01-E113-38A0-95CA-99360F92A37A> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x7fff8e428000 - 0x7fff8e49efff com.apple.CoreSymbolication (2.2 - 73.2) <126415E3-3A35-315B-B4B7-507CDBED0D58> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSy mbolication
    0x7fff8e7f3000 - 0x7fff8e7fcff7 libsystem_notify.dylib (80.1.0 - compatibility 1.0.0) <A4D651E3-D1C6-3934-AD49-7A104FD14596> /usr/lib/system/libsystem_notify.dylib
    0x7fff8e7fd000 - 0x7fff8e80cfff libxar.1.dylib (??? - ???) <9E05C939-6CBF-38E7-8915-86278F7DB6C7> /usr/lib/libxar.1.dylib
    0x7fff8e815000 - 0x7fff8e82afff com.apple.speech.synthesis.framework (4.0.74 - 4.0.74) <C061ECBB-7061-3A43-8A18-90633F943295> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x7fff8e82b000 - 0x7fff8e82cfff libdnsinfo.dylib (395.11.0 - compatibility 1.0.0) <853BAAA5-270F-3FDC-B025-D448DB72E1C3> /usr/lib/system/libdnsinfo.dylib
    0x7fff8e83e000 - 0x7fff8e8e0fff com.apple.securityfoundation (5.0 - 55116) <A9311EF6-B7F7-3DA5-84E8-21BC9B2C3C69> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x7fff8e917000 - 0x7fff8e934fff  libxpc.dylib (77.19.0 - compatibility 1.0.0) <9F57891B-D7EF-3050-BEDD-21E7C6668248> /usr/lib/system/libxpc.dylib
    0x7fff8f818000 - 0x7fff8f883ff7 com.apple.framework.IOKit (2.0 - ???) <FE838BB6-D42E-3291-A1A0-6F53FC970261> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x7fff8f884000 - 0x7fff8f8dfff7 com.apple.opencl (2.0.19 - 2.0.19) <B05BF605-73B8-328F-A228-6FA59E1FC73A> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
    0x7fff8f8e0000 - 0x7fff8f942ff7 com.apple.Symbolication (1.3 - 91) <B072970E-9EC1-3495-A1FA-D344C6E74A13> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
    0x7fff8f943000 - 0x7fff8f969fff  com.apple.framework.familycontrols (3.0 - 300) <6F0C58C0-22E7-3877-8CFA-1ED0CB3CE38B> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
    0x7fff8f96a000 - 0x7fff8f96efff libdyld.dylib (195.5.0 - compatibility 1.0.0) <380C3F44-0CA7-3514-8080-46D1C9DF4FCD> /usr/lib/system/libdyld.dylib
    0x7fff8f96f000 - 0x7fff8f97dff7 libkxld.dylib (??? - ???) <01161870-E3B3-3F87-BA4A-0AA7A081F409> /usr/lib/system/libkxld.dylib
    0x7fff8f97e000 - 0x7fff8f9d2ff7 com.apple.ScalableUserInterface (1.0 - 1) <33563775-C662-313D-B7FA-3D575A9F3D41> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/ScalableU serInterface.framework/Versions/A/ScalableUserInterface
    0x7fff8f9d3000 - 0x7fff8fadafe7 libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <EE02BB01-64C9-304D-9719-A35F5CD6D04C> /usr/lib/libsqlite3.dylib
    0x7fff8fadb000 - 0x7fff8faefff7 com.apple.LangAnalysis (1.7.0 - 1.7.0) <04C31EF0-912A-3004-A08F-CEC27030E0B2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x7fff8faf0000 - 0x7fff8faf0fff com.apple.CoreServices (53 - 53) <043C8026-8EDD-3241-B090-F589E24062EF> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x7fff8faf1000 - 0x7fff8fba7fff com.apple.PDFKit (2.7.8 - 2.7.8) <13A92FA5-E6E6-3ECF-9A70-D4330D7BE847> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
    0x7fff8fbf2000 - 0x7fff8fbf2fff com.apple.ApplicationServices (41 - 41) <89B6AD5B-5C75-3E83-8C2B-AA7F4C55E400> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x7fff900ca000 - 0x7fff901aeff7 com.apple.CoreServices.OSServices (478.50 - 478.50) <3D6AA4EF-C601-36C7-8F3A-A00964F01759> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x7fff9020d000 - 0x7fff90275ff7 com.apple.audio.CoreAudio (4.0.3 - 4.0.3) <9987DC46-2A96-3BA0-B88B-04E573C0AD9B> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x7fff90276000 - 0x7fff90401ff7 com.apple.QTKit (7.7.1 - 2353) <50F6A57F-70AB-3E5B-BE96-7A58965941F8> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
    0x7fff90406000 - 0x7fff90440fe7 com.apple.DebugSymbols (2.1 - 87) <ED2B177C-4146-3715-91DF-D99A8ED5449A> /System/Library/PrivateFrameworks/DebugSymbols.framework/Versions/A/DebugSymbol s
    0x7fff9079c000 - 0x7fff907a7ff7 com.apple.speech.recognition.framework (4.0.21 - 4.0.21) <6540EAF2-E3BF-3D2E-B4C1-F106180D6F20> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x7fff90a76000 - 0x7fff90a78fff com.apple.TrustEvaluationAgent (2.0 - 1) <1F31CAFF-C1C6-33D3-94E9-11B721761DDF> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
    0x7fff90a79000 - 0x7fff90a9dfff com.apple.Kerberos (1.0 - 1) <1F826BCE-DA8F-381D-9C4C-A36AA0EA1CB9> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
    0x7fff90b00000 - 0x7fff90e1cfff com.apple.CoreServices.CarbonCore (960.25 - 960.25) <4FC1AB30-022C-3C67-AC46-FDCBFCB7EEDE> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x7fff90e1d000 - 0x7fff90f1aff7 com.apple.avfoundation (2.0 - 180.50) <A2EAE4E6-4DBA-3AAB-A387-7E72B93B6DA9> /System/Library/Frameworks/AVFoundation.framework/Versions/A/AVFoundation
    0x7fff90fb1000 - 0x7fff9102cff7 com.apple.print.framework.PrintCore (7.1 - 366.3) <C5F39A82-0E77-3AD6-906A-20DD2EE8D374> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x7fff9102d000 - 0x7fff91051fff com.apple.RemoteViewServices (1.5 - 44.2) <A0417D7F-22E9-3FD8-AC55-67654D8E93EB> /System/Library/PrivateFrameworks/RemoteViewServices.framework/Versions/A/Remot eViewServices
    0x7fff9105e000 - 0x7fff910f0ff7 com.apple.CorePDF (3.1 - 3.1) <F81F99A9-7FF6-3A6A-92C7-78C76BA35777> /System/Library/PrivateFrameworks/CorePDF.framework/Versions/A/CorePDF
    0x7fff911a6000 - 0x7fff9121cff7 libc++.1.dylib (28.4.0 - compatibility 1.0.0) <A24FC3DA-4FFA-3DD2-9DCC-2B8D1B3BF97C> /usr/lib/libc++.1.dylib
    0x7fff91393000 - 0x7fff9139efff com.apple.CommonAuth (2.2 - 2.0) <4F5302A5-867A-3F2E-9E4B-98FA011678F8> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth
    0x7fff913ab000 - 0x7fff9140bfff libvDSP.dylib (325.4.0 - compatibility 1.0.0) <3A7521E6-5510-3FA7-AB65-79693A7A5839> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x7fff9140c000 - 0x7fff91701ff7 com.apple.security (7.0 - 55148.6) <4535E500-973A-3BA7-AF65-DF5CF0658F02> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff91704000 - 0x7fff91707fff libRadiance.dylib (??? - ???) <CD89D70D-F177-3BAE-8A26-644EA7D5E28E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
    0x7fff91719000 - 0x7fff9172bff7 libsasl2.2.dylib (3.15.0 - compatibility 3.0.0) <6245B497-784B-355C-98EF-2DC6B45BF05C> /usr/lib/libsasl2.2.dylib
    0x7fff9172c000 - 0x7fff91733fff com.apple.CommerceCore (1.0 - 17.1) <B6BFA182-9DC9-3543-89AE-F82EB9AF1CAB> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/C ommerceCore.framework/Versions/A/CommerceCore
    0x7fff91734000 - 0x7fff91753fff libresolv.9.dylib (46.1.0 - compatibility 1.0.0) <0635C52D-DD53-3721-A488-4C6E95607A74> /usr/lib/libresolv.9.dylib
    0x7fff91ad6000 - 0x7fff91c33fff com.apple.audio.toolbox.AudioToolbox (1.7.3 - 1.7.3) <5F1E4695-BC74-3ADD-8345-627BCD68201A> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x7fff92989000 - 0x7fff92a23ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <4E70C394-773E-3A4B-A93C-59A88ABA9509> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x7fff92a24000 - 0x7fff92a32fff libdispatch.dylib (187.10.0 - compatibility 1.0.0) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
    0x7fff92a33000 - 0x7fff92a68fff com.apple.securityinterface (5.0 - 55022.6) <4D6DAF8F-7873-3992-A6D6-478C7664FA39> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x7fff92a69000 - 0x7fff92a8afff  libPng.dylib (??? - ???) <E2B52527-4D0C-3595-BB13-8E8EF364E998> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
    0x7fff92ab7000 - 0x7fff92ac9ff7 libbsm.0.dylib (??? - ???) <349BB16F-75FA-363F-8D98-7A9C3FA90A0D> /usr/lib/libbsm.0.dylib
    0x7fff92aca000 - 0x7fff92ae0fff  libGL.dylib (??? - ???) <A4876AE9-DDFE-3B9A-874E-09BC29D46C39> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
    0x7fff92ae1000 - 0x7fff92b64fef com.apple.Metadata (10.7.0 - 627.37) <B9BEB598-B6F2-3BFF-A8F3-C3C87CD076AB> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
        0x7fff92b65000 - 0x7fff93503747 com.apple.CoreGraphics (1.600.0 - ???) <CB70AC19-9532-38CA-8509-6043AD9B4095> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x7fff93752000 - 0x7fff9375cff7 liblaunch.dylib (392.39.0 - compatibility 1.0.0) <8C235D13-2928-30E5-9E12-2CC3D6324AE2> /usr/lib/system/liblaunch.dylib
    0x7fff9375d000 - 0x7fff93810ff7 com.apple.CoreText (220.22.0 - ???) <A7A1096F-A211-3775-BA33-08FE98D27F08> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
    0x7fff93868000 - 0x7fff9395dfff libiconv.2.dylib (7.0.0 - compatibility 7.0.0) <5C40E880-0706-378F-B864-3C2BD922D926> /usr/lib/libiconv.2.dylib
    0x7fff9395e000 - 0x7fff939aaff7 com.apple.SystemConfiguration (1.11.3 - 1.11) <0A7F1982-B4EA-3424-A0C7-FE46C6224F03> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x7fff939c4000 -     0x7fff93a49ff7  com.apple.Heimdal (2.2 - 2.0) <52B0F371-D272-3C8E-B42F-04D3FDD8AD0D> /System/Library/PrivateFrameworks/Heimdal.framework/Versions/A/Heimdal
    0x7fff93a4a000 - 0x7fff93a58fff com.apple.NetAuth (3.1 - 3.1) <FE7EC4D7-5632-3B8D-9094-A0AC8D60EDEE> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
    0x7fff93a85000 - 0x7fff93ac0ff7 libssl.0.9.8.dylib (0.9.8 - compatibility 0.9.8) <B48E57F5-0923-3C47-8BAC-9704F4A28193> /usr/lib/libssl.0.9.8.dylib
    0x7fff93ac1000 - 0x7fff93f88fff FaceCoreLight (1.4.7 - compatibility 1.0.0) <BDD0E1DE-CF33-3AF8-B33B-4D1574CCC19D> /System/Library/PrivateFrameworks/FaceCoreLight.framework/Versions/A/FaceCoreLi ght
    0x7fff93f89000 - 0x7fff93ff1ff7 com.apple.coreui (1.2.2 - 165.11) <9316266A-39CA-3EC7-9C9E-726462CEFF4D> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
    0x7fff93ff2000 - 0x7fff94097fff com.apple.ink.framework (10.7.5 - 113) <1AE6676D-490A-36C2-B6CC-00F93AEB31DE> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x7fff94098000 - 0x7fff940daff7 libcommonCrypto.dylib (55010.0.0 - compatibility 1.0.0) <BB770C22-8C57-365A-8716-4A3C36AE7BFB> /usr/lib/system/libcommonCrypto.dylib
    0x7fff940fa000 - 0x7fff940fdfff libMatch.1.dylib (??? - ???) <42305BB6-25F9-355A-9076-FED38B21A7F9> /usr/lib/libMatch.1.dylib
    0x7fff947c3000 - 0x7fff948dcfff com.apple.DesktopServices (1.6.5 - 1.6.5) <5E7DD5F4-B4DA-3F75-A14A-3494E81CFBA0> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x7fff948dd000 - 0x7fff948dffff libCVMSPluginSupport.dylib (??? - ???) <982F1ED4-3CBB-3161-8BEA-8A980C27FCC1> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCVMSPluginS upport.dylib
    0x7fff948fc000 - 0x7fff9490bfff com.apple.opengl (1.8.1 - 1.8.1) <51B34133-CEE3-3FC6-82AC-ADF567AE673C> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x7fff9490c000 - 0x7fff9490eff7 com.apple.print.framework.Print (7.4 - 247.3) <626C58D5-2841-3329-8C32-9F4A8353F3E7> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x7fff94924000 - 0x7fff9492bfff libGFXShared.dylib (??? - ???) <D3598924-B167-372E-8C9F-1BBF68852542> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
    0x7fff949bb000 - 0x7fff94c2ffff com.apple.CoreImage (7.99.1 - 1.0.1) <4BB09B79-275B-364C-9466-0FF36ABB1218> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/CoreImage .framework/Versions/A/CoreImage
    0x7fff94c30000 - 0x7fff94c4afff com.apple.CoreMediaAuthoring (2.0 - 891) <C7A92C52-AD9F-3CF1-86D5-C0714118935C> /System/Library/PrivateFrameworks/CoreMediaAuthoring.framework/Versions/A/CoreM ediaAuthoring
    0x7fff94c4b000 - 0x7fff94c4cfff  libunc.dylib (24.0.0 - compatibility 1.0.0) <337960EE-0A85-3DD0-A760-7134CF4C0AFF> /usr/lib/system/libunc.dylib
    0x7fff94c4d000 - 0x7fff94d52fff libFontParser.dylib (??? - ???) <D2E56B6E-3182-3667-A78C-4172C435523A> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
    0x7fff94d53000 - 0x7fff94d7cfff  com.apple.CoreVideo (1.7 - 70.3) <9A9D4058-9935-3B0A-B1A6-27EB78D02249> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
    0x7fff94d8b000 - 0x7fff94da8ff7 com.apple.openscripting (1.3.3 - ???) <F5E34F54-CE85-334B-8F25-53581D43960C> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x7fff94da9000 - 0x7fff94de8fff  com.apple.AE (527.7 - 527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
    0x7fff94de9000 - 0x7fff94e2ffff libcurl.4.dylib (7.0.0 - compatibility 7.0.0) <066449E4-406B-3ABC-9DB8-E62777498154> /usr/lib/libcurl.4.dylib
    0x7fff94ee4000 - 0x7fff954c8fff  libBLAS.dylib (??? - ???) <C34F6D88-187F-33DC-8A68-C0C9D1FA36DF> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x7fff954d6000 - 0x7fff954e5ff7 libxar-nossl.dylib (??? - ???) <A6ABBFB9-E4ED-38AD-BBBB-F9958B9CEFB5> /usr/lib/libxar-nossl.dylib
    0x7fff954e6000 - 0x7fff9552aff7 libRIP.A.dylib (600.0.0 - compatibility 64.0.0) <416FB9E6-76F2-3CB8-8CCB-C12ACECFD611> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x7fff9552b000 - 0x7fff9560fe5f libobjc.A.dylib (228.0.0 - compatibility 1.0.0) <871E688B-CF57-3BC7-80D6-F6476DFF109B> /usr/lib/libobjc.A.dylib
    0x7fff9563e000 - 0x7fff9566eff7 com.apple.DictionaryServices (1.2.1 - 158.3) <5E2EBBFD-D520-3379-A431-11DAA844B8D6> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
    0x7fff95697000 - 0x7fff95697fff com.apple.Cocoa (6.6 - ???) <7EC4D759-B2A6-3A99-AC75-809FED1500C6> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x7fff95698000 - 0x7fff956d3fff libsystem_info.dylib (??? - ???) <35F90252-2AE1-32C5-8D34-782C614D9639> /usr/lib/system/libsystem_info.dylib
    0x7fff956dc000 - 0x7fff956e3fff libcopyfile.dylib (85.1.70 - compatibility 1.0.0) <E805FDF4-7098-3F9F-BF27-191E3E0A0F10> /usr/lib/system/libcopyfile.dylib
    0x7fff956e6000 - 0x7fff958e8fff libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <0176782F-9526-3905-813A-7A5676EC2C86> /usr/lib/libicucore.A.dylib
    0x7fff958e9000 - 0x7fff958eafff libDiagnosticMessagesClient.dylib (??? - ???) <3DCF577B-F126-302B-BCE2-4DB9A95B8598> /usr/lib/libDiagnosticMessagesClient.dylib
    0x7fff958eb000 - 0x7fff959c9fff com.apple.DiscRecording (6.0.4 - 6040.4.1) <E6D5835F-EE3C-3814-A2EE-6962B5570EF1> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
    0x7fff95acd000 - 0x7fff95c03fff  com.apple.vImage (5.1 - 5.1) <A08B7582-67BC-3EED-813A-4833645964A7> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
    0x7fff95c04000 - 0x7fff95c09fff com.apple.OpenDirectory (10.7 - 146) <A674AB55-6E3D-39AE-9F9B-9865D0193020> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
    0x7fff95c0a000 - 0x7fff95d71ff7 com.apple.CFNetwork (520.5.3 - 520.5.3) <1C11C214-1C70-3358-A709-69C84D999DB8> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x7fff95d72000 - 0x7fff95d77fff libcache.dylib (47.0.0 - compatibility 1.0.0) <1571C3AB-BCB2-38CD-B3B2-C5FC3F927C6A> /usr/lib/system/libcache.dylib
    0x7fff95d78000 - 0x7fff95d8ffff com.apple.MultitouchSupport.framework (231.4 - 231.4) <10A978D1-8781-33F0-BE45-60C9171F7278> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
    0x7fff95d90000 - 0x7fff95e57ff7 com.apple.ColorSync (4.7.4 - 4.7.4) <590AFCDA-F10E-31FE-9B01-DA5FFE74C2BB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x7fff95e5e000 - 0x7fff95e64fff  libmacho.dylib (800.0.0 - compatibility 1.0.0) <165514D7-1BFA-38EF-A151-676DCD21FB64> /usr/lib/system/libmacho.dylib
    0x7fff95e65000 - 0x7fff95e6dfff libsystem_dnssd.dylib (??? - ???) <584B321E-5159-37CD-B2E7-82E069C70AFB> /usr/lib/system/libsystem_dnssd.dylib
    0x7fff95e6e000 - 0x7fff95f0fff7 com.apple.LaunchServices (480.42 - 480.42) <A69F9426-05CE-3312-89FD-BC063DA66DBF> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
    0x7fff95f10000 - 0x7fff9601dfff  libJP2.dylib (??? - ???) <1CF69239-3D3D-30CE-AC7B-C7E8C9166BC2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
    0x7fff9643f000 - 0x7fff96541fff libxml2.2.dylib (10.3.0 - compatibility 10.0.0) <AFBB22B7-07AE-3F2E-B88C-70BEEBFB8A86> /usr/lib/libxml2.2.dylib
    0x7fff96542000 - 0x7fff96621fff com.apple.ImageIO.framework (3.1.2 - 588) <37F047A9-48E3-3AF7-8931-462D63BE6121> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
    0x7fff96622000 - 0x7fff96629fff com.apple.NetFS (4.0 - 4.0) <433EEE54-E383-3505-9154-45B909FD3AF0> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
    0x7fff96689000 - 0x7fff9668efff libpam.2.dylib (3.0.0 - compatibility 3.0.0) <D952F17B-200A-3A23-B9B2-7C1F7AC19189> /usr/lib/libpam.2.dylib
    0x7fff96971000 - 0x7fff969b1fff libtidy.A.dylib (??? - ???) <E500CDB9-C010-3B1A-B995-774EE64F39BE> /usr/lib/libtidy.A.dylib
    0x7fff969b2000 - 0x7fff96ccbfff com.apple.Foundation (6.7.2 - 833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff96ccc000 -     0x7fff96d10ff7  com.apple.MediaKit (12 - 602) <0C2CBEDA-412F-3DDF-9C74-44114E5E0DB9> /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
    0x7fff96f24000 - 0x7fff96f29fff libcompiler_rt.dylib (6.0.0 - compatibility 1.0.0) <98ECD5F6-E85C-32A5-98CD-8911230CB66A> /usr/lib/system/libcompiler_rt.dylib
    0x7fff96f2a000 - 0x7fff96f2dfff com.apple.help (1.3.2 - 42) <BF14DE49-F7E8-336F-81FB-BBDF2DB3AC09> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x7fff96f7b000 - 0x7fff96f81ff7 libunwind.dylib (30.0.0 - compatibility 1.0.0) <1E9C6C8C-CBE8-3F4B-A5B5-E03E3AB53231> /usr/lib/system/libunwind.dylib
    0x7fff97082000 - 0x7fff97085fff libCoreVMClient.dylib (??? - ???) <28CB0F3F-A202-391F-8CAC-FC9A1398A962> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
    0x7fff9708e000 - 0x7fff97438fe7 com.apple.MediaToolbox (1.0 - 705.94) <0719E69C-3275-3BD9-AD04-27DBADEB6E03> /System/Library/PrivateFrameworks/MediaToolbox.framework/Versions/A/MediaToolbo x
    0x7fff97523000 - 0x7fff97530fff libCSync.A.dylib (600.0.0 - compatibility 64.0.0) <39E20909-68D8-3FB7-A089-A1866618E026> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x7fff97531000 - 0x7fff97531fff com.apple.vecLib (3.7 - vecLib 3.7) <9A58105C-B36E-35B5-812C-4ED693F2618F> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x7fff97709000 - 0x7fff977e6fef libsystem_c.dylib (763.13.0 - compatibility 1.0.0) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib
    0x7fff977e7000 - 0x7fff97b13fff com.apple.HIToolbox (1.9 - ???) <CCB32DEA-D0CA-35D1-8019-E599C8007AB6> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x7fff97b26000 - 0x7fff97b59ff7 com.apple.GSS (2.2 - 2.0) <C86012C5-B613-3199-B1B3-A1494EE5E43C> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
    0x7fff97b64000 - 0x7fff97b65fff liblangid.dylib (??? - ???) <CACBE3C3-2F7B-3EED-B50E-EDB73F473B77> /usr/lib/liblangid.dylib
    0x7fff97b66000 - 0x7fff97b71ff7 libc++abi.dylib (14.0.0 - compatibility 1.0.0) <8FF3D766-D678-36F6-84AC-423C878E6D14> /usr/lib/libc++abi.dylib
    0x7fff97b72000 - 0x7fff9831afff com.apple.CoreAUC (6.16.12 - 6.16.12) <EF535959-14FE-3B61-9C32-DF4C54B8F12D> /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
    0x7fff9831b000 - 0x7fff9835cfff  com.apple.QD (3.40.1 - ???) <13ACC7F4-B004-3370-B575-6D06447EE428> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x7fff9835d000 - 0x7fff98373ff7  com.apple.ImageCapture (7.1.0 - 7.1.0) <1AD40E02-2126-377B-A0D2-CBB21D932558> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x7fff983bb000 - 0x7fff987e8fff libLAPACK.dylib (??? - ???) <4F2E1055-2207-340B-BB45-E4F16171EE0D> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x7fff98a15000 - 0x7fff98a5eff7 com.apple.framework.CoreWLAN (2.1.3 - 213.1) <D2101093-0B35-3B90-B511-E9272400ED9B> /System/Library/Frameworks/CoreWLAN.framework/Versions/A/CoreWLAN
    0x7fff98a5f000 - 0x7fff98a72ff7 libCRFSuite.dylib (??? - ???) <0B76941F-218E-30C8-B6DE-E15919F8DBEB> /usr/lib/libCRFSuite.dylib
    0x7fff98a73000 - 0x7fff98ae6fff libstdc++.6.dylib (52.0.0 - compatibility 7.0.0) <6BDD43E4-A4B1-379E-9ED5-8C713653DFF2> /usr/lib/libstdc++.6.dylib
    0x7fff98ae7000 - 0x7fff98b0ffff libsandbox.1.dylib (??? - ???) <9A89A588-BE15-39AF-9DD8-0B839AF27ABF> /usr/lib/libsandbox.1.dylib
    0x7fff98b61000 - 0x7fff98bbdff7 com.apple.HIServices (1.21 - ???) <B012EE97-D1CD-3F4B-812D-9AC7E6852FE6> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x7fff98bbe000 - 0x7fff98bdefff libsystem_kernel.dylib (1699.32.7 - compatibility 1.0.0) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
    0x7fff98bdf000 -     0x7fff98be0ff7  libsystem_sandbox.dylib (??? - ???) <5459F293-E1F2-33B3-B9B2-2ABB7B915B62> /usr/lib/system/libsystem_sandbox.dylib
    0x7fff98c02000 - 0x7fff98c37fff libTrueTypeScaler.dylib (??? - ???) <A8156684-3BBE-306C-B492-179CDFFD6027> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib
    0x7fff98d00000 - 0x7fff98d40fe7 libGLImage.dylib (??? - ???) <0B7DAB2B-F1C6-39C7-B864-61EF683B6656> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
    0x7fff98d41000 - 0x7fff98d8ffff libauto.dylib (??? - ???) <D8AC8458-DDD0-3939-8B96-B6CED81613EF> /usr/lib/libauto.dylib
    0x7fff98d90000 - 0x7fff98e8aff7 com.apple.DiskImagesFramework (10.7.4 - 331.7) <BEBA6D78-08E0-3B99-B77B-A5CBF3344834> /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
    0x7fff98f5f000 - 0x7fff98f64fff  libGIF.dylib (??? - ???) <58A4492D-AAE7-3B8F-8B06-62867471A3EE> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
    0x7fff98f9e000 - 0x7fff98f9efff com.apple.Accelerate (1.7 - Accelerate 1.7) <82DDF6F5-FBC3-323D-B71D-CF7ABC5CF568> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x7fff98f9f000 - 0x7fff98f9ffff com.apple.Accelerate.vecLib (3.7 - vecLib 3.7) <C06A140F-6114-3B8B-B080-E509303145B8> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
    0x7fff98fa0000 - 0x7fff98fa6fff com.apple.DiskArbitration (2.4.1 - 2.4.1) <CEA34337-63DE-302E-81AA-10D717E1F699> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x7fff98fa7000 - 0x7fff98fb9ff7  libz.1.dylib (1.2.5 - compatibility 1.0.0) <30CBEF15-4978-3DED-8629-7109880A19D4> /usr/lib/libz.1.dylib
    0x7fff98fba000 - 0x7fff98fbefff libCGXType.A.dylib (600.0.0 - compatibility 64.0.0) <B423C449-761C-3EE1-AFAC-26B3558FF216> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXType.A.dylib
    0x7fff98fbf000 - 0x7fff991e9fe7 com.apple.CoreData (104.1 - 358.14) <6BB64605-8DA7-337D-A2AB-A3346A421CBD> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
    0x7fff991ea000 - 0x7fff991eafff com.apple.audio.units.AudioUnit (1.7.3 - 1.7.3) <04C10813-CCE5-3333-8C72-E8E35E417B3B> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x7fff991eb000 - 0x7fff99214fff libJPEG.dylib (??? - ???) <DFD81B8F-F4CB-347B-92B8-1AFFDA924A9B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
        0x7fff99317000 - 0x7fff99357ff7 libcups.2.dylib (2.9.0 - compatibility 2.0.0) <7D2E5016-A960-3ADE-B042-F74063E79550> /usr/lib/libcups.2.dylib
    0x7fff99359000 - 0x7fff9935aff7 libremovefile.dylib (21.1.0 - compatibility 1.0.0) <739E6C83-AA52-3C6C-A680-B37FE2888A04> /usr/lib/system/libremovefile.dylib
    0x7fff9935b000 - 0x7fff993dfff7 com.apple.ApplicationServices.ATS (317.13.0 - ???) <A05126F9-7DC9-3EA7-8D94-53C6113730C6> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x7fff993e0000 - 0x7fff993edff7 libbz2.1.0.dylib (1.0.5 - compatibility 1.0.0) <3373D310-3B10-3DD1-B754-B7B138CD448D> /usr/lib/libbz2.1.0.dylib
    0x7fff993ee000 - 0x7fff99429fff com.apple.LDAPFramework (3.2 - 120.2) <275D4298-C435-3E98-AA25-95D9D0A56550> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
    0x7fff99459000 - 0x7fff995f9ff7 com.apple.QuartzCore (1.7 - 270.5) <19E5E0AB-DAA9-3F97-988C-D9A46AFB9C04> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x7fff995fa000 - 0x7fff9963cfff com.apple.corelocation (330.12 - 330.12) <CFDF7694-382A-30A8-8347-505BA0CAF312> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
    0x7fff9963d000 - 0x7fff99669ff7 com.apple.CoreServicesInternal (113.20 - 113.20) <786118E6-7D7E-3016-9FD5-A7CE411A251F> /System/Library/PrivateFrameworks/CoreServicesInternal.framework/Versions/A/Cor eServicesInternal
    0x7fff9966a000 - 0x7fff996dafff com.apple.datadetectorscore (3.0 - 179.4) <9C01D16F-75A9-3BDD-B91A-F0F32261A2E7> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
    0x7fff996db000 - 0x7fff9972dff7  libGLU.dylib (??? - ???) <DB906997-0F70-3469-BA0E-2F1DDBEAD8D5> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
    0x7fff9972e000 - 0x7fff9a334fff com.apple.AppKit (6.7.5 - 1138.51) <44417D02-6123-3FC3-A119-CE51BB4C3006> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x7fff9a335000 - 0x7fff9a3cbff7 libvMisc.dylib (325.4.0 - compatibility 1.0.0) <642D8D54-F9F5-3FBB-A96C-EEFE94C6278B> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x7fff9a3cc000 - 0x7fff9a424ff7 libTIFF.dylib (??? - ???) <CF2005B6-5C29-3DCF-BDC2-7DB114ECD7A1> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
    0x7fff9a568000 - 0x7fff9a5bcfff libFontRegistry.dylib (??? - ???) <60FF9C2C-5E44-3C49-8A08-F26101898F21> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
    0x7fff9a5bd000 - 0x7fff9a838ff7 com.apple.RawCamera.bundle (4.09 - 711) <0040632D-09A9-32DE-98E8-BFA99F9F6526> /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
    0x7fff9a839000 - 0x7fff9a864ff7  libxslt.1.dylib (3.24.0 - compatibility 3.0.0) <E71220D3-8015-38EC-B97D-7FDB383C2BDC> /usr/lib/libxslt.1.dylib
    0x7fff9a865000 - 0x7fff9a865fff libkeymgr.dylib (23.0.0 - compatibility 1.0.0) <61EFED6A-A407-301E-B454-CD18314F0075> /usr/lib/system/libkeymgr.dylib
    External Modification Summary:
      Calls made by other processes targeting this process:
    task_for_pid: 7
    thread_create: 0
    thread_set_state: 0
      Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
      Calls made by all processes on this machine:
    task_for_pid: 3708
    thread_create: 0
    thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=221.9M resident=129.3M(58%) swapped_out_or_unallocated=92.6M(42%)
    Writable regions: Total=1.4G written=276.5M(19%) resident=319.2M(22%) swapped_out=28K(0%) unallocated=1.1G(78%)
    REGION TYPE VIRTUAL
    =========== =======
    ATS (font support) 31.9M
    ATS (font support) (reserved) 4K        reserved VM address space (unallocated)
    CG image 268K
    CG shared images 4440K
    CoreAnimation 23.9M
    CoreGraphics 16K
    CoreServices                         2776K
    IOKit 10.6M
    JS JIT generated code 256.0M
    JS JIT generated code (reserved)    768.0M        reserved VM address space (unallocated)
    JS VM register file 4096K
    JS garbage collector 75.8M
    MALLOC 256.8M
    MALLOC guard page 64K
    Memory tag=242 12K
    Memory tag=251 20K
    OpenGL GLSL 1024K
    SQLite page cache 2400K
    STACK GUARD 56.0M
    Stack 12.1M
    TC malloc 1448K
    VM_ALLOCATE 1512K
    WebCore purgeable data 4108K
    __CI_BITMAP 80K
    __DATA 17.4M
    __IMAGE 528K
    __LINKEDIT 63.8M
    __TEXT 158.1M
    __UNICODE 544K
    mapped file 126.1M
    shared memory 6276K
    =========== =======
    TOTAL 1.8G
    TOTAL, minus reserved VM space        1.1G
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK5065GSXF, 500,11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0253, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
    Process:         WebProcess [294] Path:            /System/Library/StagedFrameworks/Safari/WebKit2.framework/WebProcess.app/Conten ts/MacOS/WebProcess Identifier:

    Don't post reams of information like this - it means nothing.
    Also, this is an iWeb forum which is concerned with website building and your post has nothing to do with this.
    Please look more closely when posting to ensure that you are posting in the correct forum, which you have not.  Nobody here can help you with your problem.

  • BSOD Error while booting Thinkpad L440

    Link to image
    Hi All, 
    I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system. 
    Please help.
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error while booting or loading application server by runing psadmin.exe

    HOw to upgrade the database to 8.49 from 8.48
    also to update the patch to 8.49 need to be a customer id or licensed something like that...
    i am using a trial version .....please suggest
    ==============ERROR!================
    Boot attempt encountered errors!. Check the TUXEDO log for details.
    ==============ERROR!================
    *Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :Y*
    PSADMIN.1160 (0) [06/06/09 13:12:01](0) Begin boot attempt on domain orcl
    PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Checking process status every 120 second
    s
    PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Server started
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) PeopleTools Release 8.49 (WinX86) start
    ing
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Cache Directory being used: C:\PTv849\a
    ppserv\orcl\CACHE\PSAPPSRV_2\
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(200, 0, M): PS General SQ
    L Routines: Missing or invalid version of SQL library PSORA (200,0)
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(0, 0, M): Database Signon
    : Could not sign on to database ORCL with user PS.
    PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Server failed to start
    PSWATCHSRV.3440 (0) [06/06/09 13:12:16] Shutting down
    PSADMIN.1160 (0) [06/06/09 13:12:22](0) End boot attempt on domain orcl
    *Do you wish to see the error messages in the TUXLOG.060609 file? (y/n) [n] :y*
    131215.TALENT!PSAPPSRV.3728.2056.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    131215.TALENT!tmboot.3328.3968.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error en
    countered; initiating user error handler
    131219.TALENT!BBL.2872.944.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    131222.TALENT!PSADMIN.1160: End boot attempt on domain orcl

    hi Nicolas,
    thnks for ur reply.....
    this is the link please check uptil yet what i have done now
    peopleSoft HRMS and campus 9.0 db creation please help
    can u please give the link to get the Peopletools installation Guide.
    recentely i am using pdf named hwtools849_itora.pdf FOR Database creation
    is it possible to update database from 8.48 to 8.49 by using trail version....so need to of any licensed
    AS on this link "http://gasparotto.blogspot.com/2008/06/peoplesoft-server-on-windows-xp.html" there it is shown to use update path from ftp connection to get download..where i am not able to connect
    6. PeopleTools 8.49 patch 11 - only if you are licenced - *(downloaded from ftp://ftp.peoplesoft.com/outgoing/ptools/84911)* From the extracted package, under disk1, run setup.exe, and follow the exact process as the previous one.
    add to path i ave given :- C:\oracle\product\10.2.0\db_1\BIN
    even thought i have set environment path
    like
    ORACLE_BASE = C:\oracle\product\10.2.0,
    ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ,
    ORACLE_SID = orcl,
    BEA_HOME = C:\bea ,
    PS_HOME = C:\PTv849; (DIR WHERE INSTALLED PEOPLETOOL 8.49 + PEOPLESOFT HRMS & CAMPUS SOLUTION 9.0)
    as u said
    On Windows, into you appserver config file, you should give the path directory "Add to Path" to your ORACLE_HOME\bin folder, did you ?
    please can u tell the appserver file with full path + name...by which ii can find....
    thnks..
    Edited by: user11084225 on Jun 6, 2009 2:14 AM
    Edited by: user11084225 on Jun 6, 2009 2:15 AM

  • Installing Arch Linux on USB key: error while booting

    Hello,
    first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
    So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
    Waiting 10 seconds for device /dev/sdc/
    Root device '/dev/sdc' doesn't exist. Attempting to create it.
    ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    /bin/sh: Can't contact tty; job control turned off
    [ramfs /]#
    To summarize I'll show you my conf files that could help you to resolve my problem:
    /etc/fstab.conf
    /dev/sdc1 /boot ext2 defaults 0 1
    /dev/sdc2 / ext3 defaults 0 1
    /dev/sdc3 /home ext3 defaults 0 1
    So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
    I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
    /etc/mkinitcpio.conf
    HOOKS="base udev usb autodetect pata scsi sata filesystems"
    I've added to here, "usb" to the hooks
    installed GRUB on my sdc, here is the menu.ist:
    # (0) Arch Linux
    title Arch Linux (USB)
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sdc ro vga=773
    initrd /kernel26.img
    So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
    I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
    I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

    1. What I did is re-installing entirely from my installation disk or USB to test out different setting in  my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
    2. Yes, same error.
    3. Tested out by-id/by-path and uuid = no difference
    4. Didn't know about larch, it seems to be a nice tool, I'll check it out

  • Satellite Pro A10 - IDE 1# Error on boot up

    HI there, i have a Satellite pro A10 and all has been working fine for the last few years until now.
    A few days ago i started getting an error reading cd's / dvd's invalid disc format yet the discs work fine on every other pc.
    Today i am getting IDE#1 error on boot up... the laptop is still standard from when i got it off the shelf. thinking the drive may have died due to wear and tear i replaced the drive with a working drive and i still get the same error. I have removed the ODD altogether and its still coming up.
    I have also updated the bios from usb floppy which was successful. and the best part of all this. the dvd rom that came with the laptop works fine in my other tosh a10!!!!!!
    Anyone got any ideas. i don really want to replace the main board if i can help it. this is the only issue with the laptop.
    thx in advance people.

    Hello James
    IDE 1# Error is typical when ODD is not accepted by the system. The reason for that can be defective drive or usage of non-compatible drives. The fact is that every drive can not be used with every notebook model because of different pin assignment.
    In your case it is really strange that drive work on other A10 but not on this one. Because of that I presume there is maybe some problem with connectors. I am afraid there is not much to do. You can try to check them and see if they are clean and not oxidized.
    Sorry but we can only speculate what the problem can be but, like you know, only intensive test can give you more answers.
    Good luck and pleas let us know if you will find out what the problem is.

Maybe you are looking for

  • Can i move my itunes library to another account on the same computer

    can i move my itunes library to another account on the same computer

  • Character error

    Hi! We have a strange error on our webshop engined by J2EE 620, B2B configured, SAP CRM. All swedish 'å' (å) becomes # ONLY in the hungarian version (variant) We have no encoding settings in the configured part of the jsp files, all encoding comes fr

  • Could I refactor the Database query functions?

    Hi, I have a lot of functions which doing the database queries. They all return map. "select to_chat(key), to_chart(value) from table" code like following. Since so many database access parts are same. only "query", and "preparestatement. setString(1

  • Exchange Infrastructure CRASH while alert setup

    Hi, This is travis, I setup for Alert using ALRTCATDEF and Add roles in RWB, its works fine, when alert mail XI server is crash for 5 to 10 munites.. trace log, someing look like IDOC problem and some java adaptor... do you have an idea where should

  • PC guy look for iMac w/ FCE info

    I have been researching FCE/HD on the 'net and spent the afternoon at the local Mac store playing with 24" iMac and iMovie & iDVD (they did not have a machine with FCE/HD on display) This was the first time I had ever touched a Mac. I have most of my