Link Excel Chart to Form

Is there a way to display an Excel chart in an Adobe form that is actually linked to Excel (so that when the chart is updated in Excel, it will also be udpated in the form)? I would like to create a presentation in Adobe that contains various Excel dashboards. However, I would like to avoid the need to copy and paste the charts into the form every time they get updated.

Only by using form fields, defining the Excel file as a local ODBC resource
and then creating a script to connect the two.
It would be easier to do this in a LiveCycle form, though, than in an
Acrobat form.

Similar Messages

How to link Excel Chart with multiple columns dynamically?

Hi all,
I have one problem. I have an excel chart which has to read data from multiple columns for it's X-axis values (time stamps) and the same number of values for it's Y-axis from multiple columns. See figure attached.
Now, you can do this by manually assigning values by holding control key to tell the chart that data from many columns is continued from the first column. i.e, a long data is distributed along may columns. This is done very easily manually.
Now, how to do it at runtime through LabVIEW 8.0?
Although, I have done it through labview when there where only two columns, A and B streching up to any length. But, now to save space we are dumping into many columns in the same page and want the chart plot that data as we dump it.
It is tough since I don't know how to assign SourceData of the chart through labview.
I have attached chart's SourceData picture.
Hope you all can solve my problem.
The Y-axis values are: =(good!$B$30:$B$70,good!$D$30:$D$70,good!$F$30:$F$70,good!$H$30:$H$70,good!$B$71:$B$140,good!$D$71:$D$140,good!$F$71:$F$140,good!$H$71:$H$140,good!$B$141:$B$189)
good is the name of the file.
The X- axis values are: =(good!$A$30:$A$70,good!$C$30:$C$70,good!$E$30:$E$70,good!$G$30:$G$70,good!$A$71:$A$140,good!$C$71:$C$140,good!$E$71:$E$140,good!$G$71:$G$140,good!$A$141:$A$189)
See the columns vary from A to F.
I have still not got what I love.....
Attachments:
ExcelChart.JPG ‏113 KB
SourceData.JPG ‏34 KB
XY values.JPG ‏36 KB

Ok i solved the excel chart problem. Here is the figure showing my victory! But offcourse with NI forum help.
Message Edited by Halemani on 09-19-2008 06:33 AM
I have still not got what I love.....
Attachments:
Chart_XValues_Values.JPG ‏36 KB

Link in Word to Excel chart stored in SharePoint

I want to embed chart from Excel in Word document. Both Excel and Word documents are saved in SharePoint library. What I did, was to paste chart from Excel with "link data" option enabled. I also went to Links window and set "Update method
for seected link" to "Automatic update".
This works great, asking me to update chart everytime I open Word document, which is exactly what I want. Only as long as I have Excel file open. (I noticed, that when the file was on local PC, instead of SharePoint, it worked without opening Excel). When
Excel is not open, chart is not refreshed.
If I go to Client Tools -> Design ribbon and click on Edit Data, source is opened in window and chart is updated.
My question is:
How can I force chart to update with data, that might have changed in Excel located on SharePoint? Macro, that would open the file is fine.
Making users go thru ribbon and "edit data" option is unfortunately too complicated for inexperienced users. I need one-button-click solution or something that works automaticaly.

Hi Tschareck,
According to your description , my understanding is that you want to update the excel chart data when editing the chart in the word.
As a workaround, I suggest you can use SharePoint ItemUpdated Event Receiver, when you updated the chart data in the word, then reupload the excel file in the event receiver.
Here are some detailed code demo for your reference:
How to: Create an Event Receiver
programmatically upload file to sharepoint list
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Opening Linked Excel OLE Objects in Forms 6i

Hi,
I have a linked Excel OLE object which is populating properly into an OLE container. However, I cannot open the file to save a local copy, as I would a non-linked Excel OLE object. If I right-click on the linked OLE object choose copy, I can paste the data into a spreadsheet, but it appears as an image, rather than as regular tabulated data. Is there anyway to open the file normally?
Thanks in advance.

Hi Shay,
Thanks for the reply but i was unable to register to metalink. they need some support agreement code which i do not have. Can you please give me some more information on how to use that.
waiting for an early reply.
Warm Regards
Vivek Bajaj

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one
When I try to print a chart from Excel 2007 I get a low memory error. All other printing seems to work just fine. I thought it might be because of a color fill in the chart area so I removed the fill but I'm still getting the error.
I've also cleared the fax memory and run through the steps in http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00378226&prodT...
Running: Windows WP pro (SP3)
Printer: LaserJet 3015 all in one
Current driver: HP Lasetjet 3015 PCL 6
Running as a network printer using a D-Link DP301P

When an application is installed to the expansion card, that's the only place where you will see it in the app launcher screen, i.e. by selecting the card. It will not appear in the All category because that only shows apps which are installed to internal memory.
As for the Files application, yes, it only lets you browse contents of the card. For a more robust file management utility which will let you browse your entire phone, you might want to look into a freeware application called FileZ, which I believe is available at www.palmgear.com and other places.
I've never run Documents To Go from a card, but when you open Docs to Go and open the Menu > Options > Manage Applications, there is an option there to move applications to the Card. Never having done that, I'm not sure whether it moves the whole DTG app to a card but, give it a try.
I have oodles of applications and documents stored on my Centro's internal memory, and never have run up against a memory problem. At any time, you can check available memory by going to the application launcher (home) screen, opening the menu, and selecting Info.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Acrobat X Pro does not print Excel charts from 2010 Word doc to PDF correctly

Hi,
I am trying to create a PDF from Word 2010 using Adobe Acrobat X and preserve hyperlinks but when I go through the PDF maker toolbar, the Excel charts in the Word file do not print correctly. They come up as large white boxes with a small grey arrow icon in the lower-right corner (looks like a "play" button). Does anyone know why this is and if there's a solution to this problem? Is there an update or a fix? I have a lot of Excel charts in the Word file...
Thanks in adavance,
Kika

Hello,
i am having exactly the same issue with Acrobat X Pro - with linked Excel 2010 tables in Word 2010.
Has there been a resolution to this eissue - it is potentially very time consuming to work around this issue for me.
I would post my files but I don't know how to attach them to the thread - only my second post .
Cheers,
slobbering_dog
This is the Word File - the table is an Excel 2010 spreadsheet linked (via Paste Special >Link) .
This is the resultant PDF file:
Thanks in advance - again !!
Message was edited by: slobbering_dog_72

Is it possible to write a script for Excel Chart Conversion to an ai file?

I tried to record a script and it didn’t work. I will attempt to explain what I am doing (and why) and maybe you guys can tell me if it can be done or not. We are working with Excel charts and we eventually put them into InDesign for a print magazine. Here are the steps as best as I can translate. We are using Illustrator CS6 Version 16.2.0.
1. Copy Chart from Excel
2. Paste into Illustrator
3. Fit Art Board to Graphic
4. Select All
5. Change Kerning to 0
6. Select the Background
7. Select Same Fill Color
8. Change Color to 5% Black
9. Select the grid lines on the Chart
10. Change the Stroke to 50% Black
11. Save as an AI file
There is also a scenario where there are multiple charts and we would like to make multiple art boards in the same file.
I do this for a few reasons: Remove Rich Black, Adjust Kerning, Eliminate any Font Issues, Easier to Scale, and it chokes our rip because there is no link when they are copied and pasted directly from Excel to InDesign.
Any guidance would be appreciated.

no can do, there's no access to mesh point with scripting, sorry about that.
have you tried Mesh Tormentor? it is free!!!, but I don't know if it will help with your problem
http://www.meshtormentor.com/

I created a pdf form and then iported it to Forms Central for distribute. It is now loaded to my website and setup so a person clicks on the link to open the form. At this point they then have to go to upper right to open form using a different view. I wo

I created a pdf form and then imported it to Forms Central for distribute. It is now loaded to my website and setup so a person clicks on the link to open the form. At this point they then have to go to upper right to open form using a different view. I would like the form to open directly in Adobe Reader form to make it easier to enter information. Thanks, Ike

If you created it in Forms Central, you have to edit it there. I believe Forms Central is similar to LiveCycle Designer in that the form created is no longer able to be edited in Acrobat. I might be wrong, but that is my understanding. You add the submit button in Forms Central. Within Acrobat, you should be able to go to the forms menu and Manage Data to save the data to an Excel file. Others better with forms should be by to clarify things, but this should get you started. In the future you might find it better to post a forms question in the forms discussions.

Excel charts

When I copy and paste Excel charts into ID CC the result looks of very low resolution - all jagged lines and ill-formed text on the axes. What am I doing wrong?

On Mac or Windows? I haven't done this in ages but in the past, Excel charts that were C/P into ID came in as WMF as vector but on Mac as low res raster. Best advice, however, is to paste into Illustrator, tweak, if needed, save as AI and place that.

Organization chart in forms 6i

Hi all!!
I am using forms version 6(6i).My requirement is to develop an organisation chart from forms(not using trees).Any help would be appreciated.
Thanks in advance

Hi,
it depends on how long you want to use 6i. Do you want to migrate up to 10g in the next time? Because Graphics is obsolete in 10g and you have to use java beans instead of then (means double work). Although it looks more mean to use forms and the charts there, you have to consider to do it with excel instead.
Regards,
Heike

Unable to import the excel template into form in HFM

Has any one came across this issue that I am facing now?
I have a form in HFM and I exported the form to Excel and the export works fine. but when I import the excel template into form, it was not successful. I have 250 rows in the template. I deleted 50 rows and tried to import and it worked fine . Is there any row limit on this?
Below here is the error message that I am getting
An error occured. Please contact your administrator
Error Number: - 2147467259
Error Description:007~Unexpected error~The function returned |.
Error SOrce: request Object
Page on which error occured:/hfm/data/processImportWdeffromExcel.asp
I appreciate any ideas on this

What version of HFM and Excel?
Make sure you honor the file extension requirements for 2007 docs and import the same as they are exported.

Creating a link in a PDF form to open into a new window

I have created the PDF form and every thing seems to be working fine. But I would like to set a link in the form that would open into a separate page. I have tried target="_blank" and onclick="window.open(this.href, 'child', 'scrollbars,width=650,height=600'); return false" with no success. Can someone give me some direction on how to create a link within a PDF form that will open into a new window?

Try this, using JavaScript:
app.launchURL("http://www.adobe.com",true);

How to put header and footer information in excel chart

I modified the create chart.vi, I got from this site and able to create a chart from *.xls file. Now I want to print the filename as header and date and time the chart created as footer in the excel chart. Any idea is appreciated.
Thank you
MM
Attachments:
Create_Rundown_Chart.vi ‏246 KB
SN20755-Horiz_1-031027-160128-rundowndata.xls ‏15 KB

Under the property node _Chart where you have the ChartTitle, add the property PageSetup. Cascade that into another property node and choose CenterHeader and CenterFooter. You can write the strings directly into these properties. Use the following codes:
Filename = &F, Date = &D, Time = &T
Be sure to close all references that do not leave the page (ie. Chart, Legend, ChartArea, etc.). Otherwise Excel will hang later on.
Michael Munroe
www.abcdefirm.com
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Save as Excel - Chart become picture in BO4

in BO XI 3.1, if we save as excel,
the chart is still a Excel Chart in Excel file
But in BO 4, if we save as excel
the chart in Webi will become Picture in Excel file
if is a bugs or SAP removed this feature in BO4?
Thanks.
John Kong

Hi,
If you wish to change this functionality, you could log your request at http://www.ideas.sap.com. It is an open forum where other users can see your request and can vote for it.
Regards,
Nakul Mehta

How to create business charts in Forms 10g?

In the old days, before and in 8i, we can still create business charts using Graphics Builder with the following graph types. How can we build business charts in forms 10g?
Column: Shows discrete values using vertical columns
Bar: Shows discrete values using horizontal bars
Gantt: Shows task or project scheduling information using horizontal bars
High-Low: Shows multiple Y-axis values for each X-axis point
Line: Shows data values as points connected by lines to show trends
Mixed: Combines a column and line chart
Pie: Shows how individual data values contribute to an overall total
Scatter: Plots 2 sets of potentially related data to identify possible trends
Table: Shows text data in a table
Double-Y: Shows a column or line chart with multiple values for the same X-axis value

On the samples page on OTN there is a piece on how to use BI beans to achieve business charts. Search for "BI bean Graphs in Forms".

Link Excel Chart to Form

Similar Messages

Maybe you are looking for