LINK Excel.Sheet has issues with Non-English Office

In non-english office when we issue
LINK Excel.Sheet.12 command, the range parameter is causing "Error! Invalid Link" error (¡Error! Vínculo no válido in spanish).
Example if we do:
{LINK Excel.Sheet.12 C:\\Temp\\Text.xlsx Test!R1C1:R2C2 \a \f 4 \h}
We get invalid link error (in spanish).
But when we remove the range parameter:
{LINK Excel.Sheet.12 C:\\Temp\\Text.xlsx \a \f 4 \h}
It works. This of course by default links only the first sheet by default. Anyone knows if this is a bug in Office for non-english? We are using Office 2010.

Hi V.C.A,
Based on your description, it seems that your issue was related with the field link feature of the Word, and this forum is mainly discussing about the Word development questions related to VSTO, VBA and .etc. For your issue, I will recommend you going to
the forum below for help:
http://answers.microsoft.com/en-us/office
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Similar Messages

Issue with non-english application in thin client - virtual directory issue

Hi,
I have just completed Siebel 8 installation on solaris machine along with SunOne Web server 6.1.
I have installed both ENU and ARA language packs for Siebe Enterprise, Sweapps.
The issue is after installation and repository installation for both ENU and ARA, I am able to open only ENU applications in thin client.
When I try to open the ARa applications the browser gives "Page not found" error.
I have verified first, whether the Siebel components running or not. Confirmed that for example for Callcenter SCCObjMgr_ara component is active and online.
But what I observed is, in SUNOne web server instance's config folder, there is a file obj.conf.
In this file there are entries for only enu applications like,
NameTrans fn="pfx2dir" from="/callcenter_enu" dir="/siebelapp/sweapp/public/enu"
There are no links for ARA applications.
I think this could be the reason for issue.
But while installing and configuring sweapps, I have selected the logical profile location as "/siebelapp/gtwysrvr/admin/Webserver".
So this should create such links in obj.conf for ARA as it created for ENU apps. But it didn't happend.
Please advise, how to get the ARA applications.
Thanks
Vamshi
Edited by: user4619223 on Mar 23, 2010 11:36 AM

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

FTP Adapter : Issue with Non English Text.

Dear All,
We are trying to read a file which contains Korean Language and write into a different folder in a CSV format.
The output file contains "???" inplace of Korean text.
We can see the invoke to FTP adapter contains Korean text as part of it's input. But the CSV file contains "???"
<FinalTradeCardList>
<imp1:FinalRows>
<imp1:C1>NO</imp1:C1>
<imp1:C2>사이트코드</imp1:C2>
<imp1:C3>사이트명</imp1:C3>
<imp1:C4>승인일자</imp1:C4>
<imp1:C5>주문번호</imp1:C5>
<imp1:C6>주문자</imp1:C6>
<imp1:C7>주문자연락처</imp1:C7>
<imp1:C8>카드종류</imp1:C8>
<imp1:C9>승인번호</imp1:C9>
<imp1:C10>거래상태</imp1:C10>
<imp1:C11>거래상태일시</imp1:C11>
<imp1:C12>할부</imp1:C12>
<imp1:C13>거래금액</imp1:C13>
<imp1:C14>비과세공급가액</imp1:C14>
<imp1:C15>과세공급가액</imp1:C15>
</imp1:FinalRows>
</FinalTradeCardList>
What needs to be done in BPEL to get Korean Language text in CSV file.
Thanks,
Sid.

Thanks for your reply.
I used the character set as you suggested.But it is not getting converted correctly.
Actual Value : (유)라이프테크놀로지스코리아
Converted Value : ( $)C @/ ) 6s@LGAEWE)3n7NAv=:DZ8.>F
I tried all others that are mentioned in the document. Still i am seeing different values. I am not getting the actual value.
But in BPEL i see correct value getting passed to FTP Adapter.
The character set is in XSD. Please find it below..
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
 xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
 xmlns:tns="http://TargetNamespace.com/DeleteMe"
 targetNamespace="http://TargetNamespace.com/DeleteMe"
 elementFormDefault="qualified"
 attributeFormDefault="unqualified"
 nxsd:version="NXSD"
 nxsd:stream="chars"
 nxsd:encoding="ISO-2022-KR">
<xsd:element name="Root-Element">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="Row" minOccurs="1" maxOccurs="unbounded">
 <xsd:complexType>
 <xsd:sequence>
 <xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
 <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
 </xsd:sequence>
 </xsd:complexType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
</xsd:element>
</xsd:schema>
Please review the above and help me in resolving this issue.
Thanks,
Sid.

Acrobat X - Word with linked Excel-Sheets is blank

Hello Acrobats,
the following problem occurs using MS Office 2007 on Win XP with Acrobat X PDF-Maker:
A MS Word document has a linked Excel-Sheet inserted.
The PDF maker is used to create a PDF with no tags or PDF/A specification.
With Acrobat 9 no problems occured.
Now, with Acrobat X the following happens: The part, where the Excel sheet is positioned, only a black frame is shown with a "play"-button (as shown below).
Does anybody know how to avoid this problem?
Thanks in advance
mannikaltz

Hi ,
This is a known issue and this will be fixed soon in the next sub-release of Acrobat X . Till then ,as a workaround , you can copy paste the contents of the 'linked' file to your word file ,instead of linking the file , this will produce an equivalent PDF .
Thanks for your feedback .
Thanks,
Apoorv

Youtube issue - search with non-english letters

The issue appeared after the recent software update, worked correctly in the previous one.
When searching youtube with non-english letters (through iphone remote app), it assumes every letter to be an "enter" and reports a problem connecting to youtube.
Even when I try using the "recent searches", it will report the same problem for non-english items.

you need to report it to apple via http://www.apple.com/feedback/appletv.html

Lion / Safari 5.1 has issues with the pinch/zoom (embedded links don't zoom correctly)

Ever since upgrading to Lion Safari 5.1 has issues with the pinch/zoom. Any embedded link does not zoom in proportion to the surrounding page and it makes it unusable. (the embedded link zooms much more). Any ideas? This makes safari almost unusable for many webpages.
Is there a fix to this? Or can I consider uninstalling 5.1 and rolling Safari back to 5.05? Not sure if this is a Lion issue or a Safari issue. Everything worked great prior to Lion.
(I have to say, Lion has been more annoying than beneficial to this point!)

Here are 2 screenshots of the issue (before and after a zoom) see how the add in the first one that shows 25% off in the first picture zoomed too large after the zoom to see the whole thing?

Excel sheet has modified data cells error - do you want to submit

Using smartview in office 2007 I often get trapped in a loop where each time I modify any data on the excel sheet I get the error "Excel sheet has modified data cells. Do you want to submit the modified data cells before proceeding?". Regardless if I choose yes or no I basically have to start a new instance of excel to clear the error.
For the most part I never use member select rather just type the members I want freehand in the excel workbook. Seems like the error arises after I insert or delete a row or column and then try to update the page.
If I "reset" the connection it seems to help but not all the time.

This may be the same issue as you are experiencing "When Trying to Copy Cells Between Excel Tabs Get Message "Excel Sheet has modified data cells do you want to submit the modified data?" [ID 1301092.1]"
The document is on "My Oracle Support"
Cheers
John
http://john-goodwin.blogspot.com/

Logon with non-English language LSMW donot display character

hi,When I Logon with non-english language ,
When I use LSMW ,
But the screen donot display character,
and in smlt , i setting supplementation language is english ,
who can help me ,thanks.

Hi Benson,
Can you please elaborate on the issue. What characters are missing?
Regards.
Ruchit.

Screen locked with non-English keyboard layout selected

Hello,
I use two keyboard character sets for keyboard. The switch between them is Command-Space.
I also have password requirement for waking up or going from screen saver.
Now if screensaver starts with non-English layout selected, I'm not able to login:
password is not accepted because keyboard layout is not English and switching
to English layout does not work in unlocking window.
Is there any way to change layout while in the unlock window?
Thanks

Yes you are right, this is not a bug, it's just bad user interface. Just imagine the following scenario...
Writing a paper, switching to Greek to enter a couple of characters and leaving the mac idle for 5 mins.
The lock screen comes up asking for a password, unfortunately the user didn't change the language
before the mac was left idle and there is no option to change the language in the lock screen.
User has to hard reset to access the mac and let's hope that the user was saving his paper frequenlty.
So from a coding point of view this is not a bug, but from a user interface design it is a huge flaw

Customer Mss Upload with non ENGLISH language

Hi,
I have a BDC program which uploads customer Address data into the system.
Now I have some customer data with non english characters like chinese and Japanese. If I try to upload this data with english language LOGON then data doesnt updates correctly but if I use the corresponding language logon and upload the same data then it works fine.
Is there any ways I can upload these non english customer data with english system logon using BDCs or do I need to use any other approach?

Hi Benson,
Can you please elaborate on the issue. What characters are missing?
Regards.
Ruchit.

Problem with Non-English Fields Output to PDF by JASPER in JDev10.1.3

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

Upload text files with non-english characters

I use an Apex page to upload text files. Then i retrieve the contents of files from wwv_flow_files.blob_content and convert them to varchar2 with utl_raw.cast_to_varchar2, but characters like ò, à, ù become garbage.
What could be the problem? Are characters lost when files are stored in wwv_flow_files or when i do the conversion?
Some other info:
* I see wwv_flow_files.DAD_CHARSET is set to "ascii", wwv_flow_files.FILE_CHARSET is null.
* Trying utl_raw.cast_to_varchar2( utl_raw.cast_to_raw('àòèù') ) returns 'àòèù' correctly;
* NLS_CHARACTERSET parameter is AL32UTF8 (not just english ASCII)

Hi
Have a look at csv upload -- suggestion needed with non-English character in csv file it might help you.
Thanks,
Manish

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Error when import file with non-english character

Hi, I have images file with non-english character (unicode), for example ABC<X>.png where <X> is non-english character such as japanese, chinese, etc. Whenever I want to import the file to After Effects (right click -> import -> file), I always encounter error: Finding file/dir info for the file "C:\...\ABC?.png" -- file not found (-43) (3::30) Can't import file "ABC?.png": unsupported filetype or extension. (0::1) My PC is Windows XP Professional 2002 SP2 English. How to solve this problem? Thanks

Adjust your system language settings. Proper file name conventions require a consistent Unicode environment, so install the respective foreign language support files or switch the language system-wide. Mixing different zones/ code ranges is always a bad idea. If your system is not in Japanese, AE will always misinterpret the characters and refuse to import. If that's not feasible, simply rename the files.
Mylenium

Compare Server Names in Excel sheet from column1 with column 2 and exact matched server names should be saved in column 3 in same Excel sheet

Hi Guys,
First of all thanks in advance any help much appriciated.
I am new in scripting and excel, i am looking for below solution as my job requires daily work of this kind and i came to know by automating this work lots of time can be saved.
Compare Server Names in Excel sheet from column1 with column 2 and exact matched server names should be saved in column 3 in same Excel sheet.
Looking solutions first using excel i.e.vlookup itself so that it will not require any approval in my job else using powersell ,vbscript.
Once again Thanks for you guys.
/Regards
Nitesh24in

Hi Edward,
Thanks once again
I have only changed excel file path and after that this is saved as below , i am not sure which three lines should be together in one line. Please advise.
$excel = New-Object -ComObject Excel.Application
$Workbook = $excel.Workbooks.Add("F:\NewDocsToReadNitesh26-May2013\Excel\test.xls")
$WorkSheet = $Workbook.Worksheets.Item(1)
$WorkSheet.Activate() | Out-Null
For ($i=1;$i -le $worksheet.UsedRange.Rows.Count;$i++) {
If ($worksheet.cells.item($i,1).value2 -eq $worksheet.cells.item($i,2).value2) {
$worksheet.cells.item($i,3).value2 = $worksheet.cells.item($i,1).value2
}$Workbook.Save()$excel.Quit()[System.Runtime.InteropServices.Marshal]::ReleaseComObject([System.__ComObject]$excel) | Out-Null
Thanks and Regards
Nitesh24in

LINK Excel.Sheet has issues with Non-English Office

Similar Messages

Maybe you are looking for