Link for BUT000 table and ADRC in CRM and inner join is not working in PCUI
Hi Gurus,
Please tell me the link btween BUT000 and ADRC table. and i wrote one inner join between BUT000 and BUT0id table but it not working. I m in CRM 4.0 version working with PCUI.
select but000partner but000name_org1 but000name_org2 but000bus_sort1 but0id~parnter1
but0ididnumber from but000 inner join but0id on but0idpartner = but000~parnter
into corresponding fields of table it_result where partner in s_partner.
It is giving error as partner unknown from but000 table. I delcared everything and tried with alias names also.
please clarify me.
regards,
Ramakrishna.
Hi Frederic,
thanks a lot. But is inner join between BUT000 and BUT0ID will work. for me it is not working. plesae see this code.
tables : but000,
but0id,
crmm_but_custno,
adrc.
types : begin of typ_but000,
partner type bu_partner,
name_org1 type BU_NAMEOR1,
name_org2 type BU_NAMEOR2,
bu_sort1 type BU_SORT1,
idnumber type BU_ID_NUMBER,
partner1 type bu_partner,
end of typ_but000.
data: lt_but000 type table of typ_but000,
ls_but000 like line of lt_but000.
*select-options : s_partnr for but000-partner.
start-of-selection.
select but000partner but000name_org1 but000name_org2 but000bu_sort1 but0id~parnter1
but0id~idnumber into corresponding fields of table lt_but000 from but000
inner join but0id on but0idpartner = but000parnter. " where partner in s_partner.
it is giving error as but000-partner is not know or but0id-partner not known.
So, i think if it not works then i should write two select stmts.
please clarify me.
i gave u rating.
thanks
ramakrishna.
Similar Messages
-
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
What index is suitable for a table with no unique columns and no primary key
alpha
beta
gamma
col1
col2
col3
100
1
-1
a
b
c
100
1
-2
d
e
f
101
1
-2
t
t
y
102
2
1
j
k
l
Sample data above and below is the dataype for each one of them
alpha datatype- string
beta datatype-integer
gamma datatype-integer
col1,col2,col3 are all string datatypes.
Note:columns are not unique and we would be using alpha,beta,gamma to uniquely identify a record .Now as you see my sample data this is in a table which doesnt have index .I would like to have a index created covering these columns (alpha,beta,gamma) .I
beleive that creating clustered index having covering columns will be better.
What would you recommend the index type should be here in this case.Say data volume is 1 milion records and we always use the alpha,beta,gamma columns when we filiter or query records
what index is suitable for a table with no unique columns and primary key?
col1
col2
col3
MudassarMany thanks for your explanation .
When I tried querying using the below query on my heap table the sql server suggested to create NON CLUSTERED INDEX INCLUDING columns ,[beta],[gamma] ,[col1]
,[col2] ,[col3]
SELECT [alpha]
,[beta]
,[gamma]
,[col1]
,[col2]
,[col3]
FROM [TEST].[dbo].[Test]
where [alpha]='10100'
My question is why it didn't suggest Clustered INDEX and chose NON clustered index ?
Mudassar -
My iPhone says Searching in the top right hand side and has been like this for 2 days. Already had a replacement sim yesterday, still not working. Apple advised me to restore my phone by connecting to iTunes. When trying to do this it's not allow
Are you on a Windows PC? Do you have anti-virus software running on it? Here are some help articles for you to troubleshoot with:
Resolve iOS update and restore errors
Resolve iOS update and restore errors in iTunes -
I bought Lightroom 5 and installed it. I was asked for the Serial number and I entered it. But it does not work. Why?
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
Question
I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? ThanksCrap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that... -
I downloaded the IOS7 on my iphone yesterday. Asked for a password, put it in. Now the password does not work and my phone is now disabled. What can I do?
Hi there Martha250,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?
Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using. -
I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?
The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced. -
i just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????
There is only one speaker, what looks like another speaker is actually a microphone. All iPhones only have one speaker down by the dock connector.
-
"you are tring to use is a network resource that is unavailable. find folder itunes.msi" i dont have a folder like that and anything i use that is related does not work. ive tryed to uninstall but still does the same thing when.
Should the advice above not fix things for you...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help
I think you misunderstood the guy. The up-to-date program isn't working for a lot of people. I'm eligible for the free upgrade but it fails to recognise my serial. From what I've read, this is affecting a lot of people who purchased their computers online. Apple seems to be fixing the issue though, so my advice would be to keep trying. Alternatively, click on the manual verificaton link so they can check your order for you and send the redemption code after they do.
-
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest
Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.
-
HELP!
Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blankIt's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.
Maybe you are looking for
-
Clicks and Pops in Audio even with High Buffer Values
Dear Community, I'm running into a problem with my Mac Pro 2008 for which I need urgent help. I have a Mac Pro 2008 which I use to do some audio production and mixing. I use 10.8 Mountain Lion for some time now, mainly with Avid Pro Tools 10 and Logi
-
Association Rule : Settings in PL/SQL
I've developed a model in ODM GUI for association rules. I'm now looking to develop the same in PL/SQL. I need to know how to specify the case id that has 2 attributes (CUST_ID and TIME_ID) and I have the PROD_ID as the ITEM ID. I have the following
-
Hi, I am using CDONTS to send of an e-mail but need it sent to several addresses at once. Is that possible?
-
Dynamic tooltips for charts (BusinessGraphics) with simple series
Hello, I was wondering wheter the tooltip for charts with simple series can set dynamically. I cannot bind it to the context within the properties of the BusinessGraphics control but maybe it can be set in the code? This way I want to show the value
-
Adobe download assistant wont open
I am trying to download Adobe Premiere Elements 12 trial on Windows Vista and I've clicked download. Adobe Download Assistant downloads but will not open. I tried clicking on it it to open, but nothing works. I am pretty sure I have all of the system