Link for Launching Collaboration Launch Pad

Hello,
At the moment I configure the Minimal Basic Configuration for Collaboration. I want to activate the link for launching the Collaboration Launch Pad. I did all steps but I don't find the link. I know that a link have to be in masthead.
Does this mean that there should be "Collaboration" near "Content Administration", "Content Management" and so on? I don't see a link "Collaboration". What I could do?
Kind regards and thanks in advance
Susanne Baumann

Hi Susanne,
If you have changed your framework page, then you should make that
change there also.Because as per the master rules, you will be using
a specific framework page for your id. That can be verified in ur master rules.
So if that is the framework which you have customised , then this change will have to be made there also.
Hope its fine now.
Regards
Vineeth

Similar Messages

Magic mouse gesture for launch pad?

is there anykind of gesture to open launchpad for the magic mouse or is clicking the icon on the dock the only way to open it.

No, but let me know if you find a way!!

Collaboration Launch Pad (CLP) problem

Hi,
We have implemented a Federated Portal Network. Our purpose is setting
a chat between both federated portals.
We have a problem when we activate the link for Launching the
Collaboration Launch Pad (CLP) in the consumer portal (EP7 SP10). The
producer portal is EP7 SP10 too.
Once done the steps indicated, the collaboration link is not displayed
in the consumer portal tool area if the language is specified in
english. However, if we change the language to spanish, the
collaboration link appears. In the producer portal occurs the same
problem: the collaboration link only appears if the language is spanish.
If we try to send a instant message through the CLP to other user, we
get the following error:
Error en tiempo de ejecución del portal
"Error ocurrido durante el proceso de una solicitud para :
iView : com.sap.netweaver.coll.appl.ui.base.UpcmSession
Componente : com.sap.netweaver.coll.appl.ui.base.UpcmSession
Se ha grabado excepción en log. Diríjase al responsable del sistema.
Exception id: 08:31_28/09/07_0020_11593350
See the details for the exception ID in the log file"
What is the problem? Why is it necessary to use spanish language?
Thanks in advance,
Samantha.

Hi,
perhaps your user is set to have the lightweight framework and not the default in the master rule collection.
Then you should enable the CLP in the lightweight as well.
Regards,
Manuel

Launch pad has question mark in icon and won't launch

Hello,
On my intel mac with lion the icon for launch pad has a question mark over it and wont launch. Also when I hit f4 it wont start launch pad. Any help would be appreciated.

Somehow you've managed to delete it.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Launch pad in customization

Hi guys,
I do not see any facility to customize Launchpad in MSS through SPRO. Can any one tell me what needs to be done.
I went to SPRO --> integration with my other mysap.com components --> Business packages / Fucntional PAckages --> Manager self-service (Mysap ERP) .
I see a node called reporting but it does not haev any customization entries for Launch pad.
Can some one let me know if there is supposed to be some customization possible for launch pad and if yes how do we enable them to be accessed through SPRO.
Apreciate any gidance on the same,
regadrs
Sam
regards
Sam

Funny as it may sound, but i did not find this node when i did a search in SPRO in dev system. I did find this in the QA system though.
I probably need to talk to the basisi guy as you suggested
regadrs
Sam

Link 1 and Link 2 in Collaboration Launch Pad

Hello,
I'm trying to configure Link 1 and Link 2 options in the CLP. These two links appear activating the EnableLink1 / 2 in Tool Area properties.
So far I haven't find a way to set the properties for the links.
Is there any documentation about this?
Rgds,
Fernando

Hi,
To do any modification on the portal tool area
Navigate to
<SAP_J2EE_Engine_installation_dir>\cluster\server\services\servlet_jsp\work
\jspTemp\irj\root\WEB-INF\deployment\pcd.
Copy com.sap.portal.navigation.toolarea.par.bak to your desktop and rename it to .par
Modify the code and redeploy it again
also check Collaboration Administration-> Collaboration Launch Pad Administration -> Link Command
locate link1 or link2
Edit
change its reference
Thanks

Customizing ToolArea hides the Collaboration Launch Pad link...Please guide

Hello All,
This is the second time now that when I customize the ToolArea...like in first one I added a marquee and now a clock showing the current time to users.
But in doing so, <b>the Collaboration Launch Pad link disappears</b>.
And I did not touch any code related to it.
I just add a <td> after the <td>of SearchTextBox in ToolArea.
Please help me understand this behaviour? Whatz going wrong?
Awaiting Reply.
Thanks and Warm Regards,
Ritu R Hunjan

Hi Abdu,
Inorder to enable your instant mesaging and other activities in the launch pad enable the RTC and collaboration lauch pad property of the tool area iview in the innerpage.Automatically then you should get all the link to activities.
also you can hide some of the properties if you donot want to show them in the CLP.
for this refer to
http://help.sap.com/saphelp_nw04/helpdata/en/bb/1e917d81037441b68d42cd6c5dca6c/frameset.htm
Hope this helps,
Regards,
Uma.

Collaboration Launch Pad Link dissapeared from Toolbar

Hello,
I need help with the Collaboration Launch Pad.
According to the SAP Help I have configured the CLP, so that it shows the link on the toolbar in the top portion of the screen. It worked fine, until some time ago, when it stopped showing in the toolbar. We installed a TREX Patch somewhere around that time, but I cannot imagine that that could be the cause.
Has anyone experienced a similar problem?

I already found out, what the problem was. The delta-linked iView Tool Area in the Default Framework Page got somehow corrupted (don't know why - it had two instances of the parameter "Enable Collaboration Launch Pad"), I deleted it and copied the original Tool Area iView into the page again. Then I have set the "Enable Collaboration Launch Pad" property to true and voila, the link was here again

Adding link to edit user personal data in Collaboration Launch Pad

HI Experts,
1. How to add a link for user to edit personal data
(General Data) in CLP.When i click a link it should display the user modification window. After modification it will save the data. what is the name of iview for this and where is this iview located in portal. How can i do this.
2. i have imported the PAR file "com.sap.netweaver.kmc.people.par" in to the NWDS & deploy it. After that i have created an User Details Iview, when i preview this iview it showing "Cannot identify the user. Make sure that the user mapping has been defined". what is the problem? please help me..
Regards,
Senthil K.

Hi Senthil, I am having the same problem. Can you let me know how you solved the issue.

Collaboration Launch Pad as iview in the Portal content

Hi friends,
i have the following problem. I configured the collaboration launch pad (real time collaboration) and it works fine.
I just don´t want to start the iview from the collaboration link next to the TREX search. Instead of that i need the iview with the user status and the possibility to start an instant message session within the portal content.
Does anyone know if it is possible and what is the name of the corresponding iview?
Thanks in advance
Michael

Hi Michael
Create an new iView (new from PAR => iView) and select the com.sap.netweaver.coll.shared.ui
Create a link in the iView to the contacts:
In the iView properties add in field "Path for Initially Displayed Folder": /alias/%3Cmycontacts%3E
and in field "Path for Start Uri": /alias/<mycontacts>
Hope this helps.
This worked, but I needed also to activate the Tool Area with activated CLP link. I didn't get it work without Tool Area.
Regards,
Stefan

KM Collaboration Launch Pad Problem

Hi , I am using EP6 .
The Portal shows link for Collaboration Launch Pad but whenever i click over it the following error is occuring:
Exception Class: class com.sapportals.wcm.WcmException
Exception Message : Cannot get an instance of the presence state service
Pls help me solve this problem.

Hello Vinod,
Check this:
https://www.sdn.sap.com/irj/sdn/thread?threadID=177728
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

KM Collaboration Launch Pad Error

Hi all,
I am working with EP 6.0 .
The portal shows link for Collaboration launch Pad.
Whenever i click on that link, i get following error message.
Exception class: class com.sapportals.wcm.WcmException
Exception message: Cannot get an instance of the presence state service
Pls hekp me solve this problem.
I will really appreciate ur help.

Hello Vinod,
Check this:
https://www.sdn.sap.com/irj/sdn/thread?threadID=177728
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Collaboration Launch pad EP5

I'm working in EP5 SP5.
I want to move the collaboration drop down menu from the portal header to an iview.
I tried creating an ASP that includes
<!#include file="../../../IE/CollaborationNew/Collaboration Injector.asp">
and then calls the InjectCollaboration function but I keep getting an error;
Microsoft VBScript runtime (0x800A01A8)
Object required: 'Application(...)'
/SAPPortal/Common/CommonFunctions.asp, line 64
Anyone have any ideas?
Is there another way to get this accomplished? I see that in EP6 there is a master iview for this, but I can't find one for EP5.
<TABLE cellspacing="0" cellpadding="0" width="100%" border="0">
<TR>
<TD width="100%"> <%InjectCollaboration%></TD>
</TR>
</TABLE>

I already found out, what the problem was. The delta-linked iView Tool Area in the Default Framework Page got somehow corrupted (don't know why - it had two instances of the parameter "Enable Collaboration Launch Pad"), I deleted it and copied the original Tool Area iView into the page again. Then I have set the "Enable Collaboration Launch Pad" property to true and voila, the link was here again

Collaboration launch pad inot seen

I am not able to see the Collaboration Launch Pad. I have performed the steps given in;http://help.sap.com/saphelp_nw04/helpdata/en/0a/e070403590ca01e10000000a155106/frameset.htm
1.      In the portal, choose Content Administration ® Collaboration Content ® Collaboration Launch Pad Administration ® Command Group.
a.      Copy the existing command groups to your own namespace.
Use the Replicate function and save each command group with a different name. In this way, you prevent the command groups used being overwritten during the next system upgrade.
b.      Make a note of the names that you have assigned for the command groups clpGroup and userGroup.
2.      In the same path as for step one, choose the type class.
a.      Launch the clpType entry for editing.
b.      For the contextmenu_commandgroup field, select the name with which you saved the clpGroup command group.
c.      Choose OK.
d.      Launch the userType entry for editing.
e.      For the contextmenu_commandgroup field, select the name with which you saved the userGroup command group.
f.      Choose OK.
The problem is at 2)b). I am not able to see my renamed command group. Pls suggest. I have restarted the J2ee engine as well.

This is also done as given in the sap documentation "Configuring the Masthead for Collaboration " @ http://help.sap.com/saphelp_nw04/helpdata/en/0a/e070403590ca01e10000000a155106/frameset.htm
One strange thing is the link shows up for user administrator, but not for any other user. Even when i assign the administrator role to another user it doesn't show up.
Message was edited by: Aditya Atluri

Changing colour of collaboration launch pad hyperlink

Hi
Is it possible to change the colour of the hyperlink for the collaboration launch pad and the advanced search? I can't find anything in the themes sections and have altered all the hyperlink options I can find with no effect.
Thanks
Cindy

Hi Cindy,
if you have an ep 6 portal go to the theme editor ->portal masthead and there you have function links it should be there.
hope it helps,
Yoav

Link for Launching Collaboration Launch Pad

Similar Messages

Maybe you are looking for